Gelatin as an additive in bio-based barrier films

The main objective of the present study was to verify the approach on starch-gelatin blending for the paperboard coating formulations with enhanced barrier and mechanical properties. Based on that, another objective was to find out, how the approach will function with wood-based polysaccharides (CMC, EHEC and HPC) by analyzing their barrier properties and convertibility. The last objective was to find out, if pigments can be used in the composition of polysaccharide-protein blends without causing any negative effect on stated properties. The whole process chain of the barrier coating development was studied in the research. The methodology applied included pilot-scale coating and converting trials for the evaluation of mechanical properties of obtained coatings, namely their exposure to cracking with the loss of barrier properties. The results obtained indicated that the combination of starch with gelatin, in fact, improves the grease barrier properties and flexibility of starch-based coatings, thereby confirming the offered approach. The similar results were obtained for CMC, exhibited elevated barrier properties and surface coverage, proving that the approach also functions with wood-based polysaccharides. The introduction of equal amounts of talc gave various effects at different gelatin dosages on barrier properties of wood-based polysaccharides. Mainly, the elevation of grease barrier properties was observed. The convertibility of talc-filled coatings was not sufficient.

Communicative Purposes of Press Releases Announcing Reduction in Workforce

Tämä tutkielma käsittelee kaupallisten yhtiöiden julkaisemia lehdistötiedotteita, joissa ilmoitetaan henkilöstövähennyksistä. Erityisenä tutkimuskohteena ovat lehdistötiedotteiden informatiiviset ja promotionaaliset päämäärät ja tarkoitukset sekä näiden päämäärien ja tarkoitusten ilmentyminen tekstin retorisen rakenteen, valittujen retoristen strategioiden sekä leksikaalisten ja kieliopillisten valintojen kautta. Tutkimuksen aineisto koostuu 50 englanninkielisestä lehdistötiedotteesta, jotka sisältävät ilmoituksen henkilöstövähennyksistä. Lehdistötiedotteet kerättiin yritysten verkkosivuilta. Tutkimuksen teoreettisena viitekehityksenä toimivat soveltavan kielentutkimuksen alalla erityisesti ammattikielentutkimuksessa (ESP, English for Specific Purposes) laajalti käytetty Swalesin (1990) tekstilajia (genre) koskeva määritelmää ja Bhatian (1993) kehittämä geneerisen analyysin malli. Ennen aineiston kielitieteellistä analysointia tutkimuksessa perehdyttiin Bhatian (1993) mallin mukaisesti lehdistötiedotteiden historiaan, kohdeyleisöihin, diskurssiyhteisöön ja sen tuottamiin muihin tekstilajeihin, aikaisempiin lehdistotiedotteita käsitteleviin kielitieteellisiin tutkimuksiin sekä erityisesti yritysten henkilövähennyksiin liittyvään tilannekontekstiin. Kielitieteellisessä analyysissä tutkittavista teksteistä tunnistettiin kahdeksan retorista vaihetta (move), jotka olivat tyypillisiä tutkituille teksteille. Kunkin retorisen vaiheen yksittäiset ilmentymät koottiin yhteen erillisiksi aineistoiksi, joista pyrittiin tunnistamaan kullekin vaiheelle tyypilliset retoriset strategiat sekä toistuvat leksikaaliset ja kieliopilliset valinnat. Tutkimuksessa todettiin, että vaikka tutkittujen lehdistötiedotteiden pääasiallinen tarkoitus oli yhtiön toiminnasta tiedottaminen, niillä oli myös promotionaalinen päämäärä, joka ilmeni mm. pyrkimyksenä välittää yhtiöstä mahdollisimman positiivinen kuva eri kohdeyleisöille, erityisesti sijoittajille. Tämän positiivisen kuvan välittämiseen käytettyjä keinoja olivat mm. odotettavissa olevien saavutusten korostaminen, ulkoisten tekijöiden nimeäminen nykyisen tilanteen aiheuttajaksi, passiivin käyttö sekä erilaiset yrityksen julkisen kuvan säilyttämiseen pyrkivät (face-saving) strategiat.

Det planlagda och det som visar sig : klasslärarstuderandes syn på undervisning i teknisk slöjd

Sloyd as an activity concretizes man’s ability to, with the help of mind and body, reshape materials into objects and change her conditions for survival. The sloyd actor outside school works when the spirit moves her, while the pupil in school is expected to sloyd regardless of motivation. Subject teachers become experts on sloyd in educational settings, while the qualification requirements may set the class teachers’ voluntariness within parenthesis. All class teachers qualify to teach all core subjects of the national curriculum in Finland from preschool to grade six. The aim of the current thesis is to deepen the knowledge on how the science of sloyd education can support class teacher students’ future teaching in sloyd. In the empirical part of the study, Swedish-speaking Finnish class teacher students’ views on technical sloyd as one of their future subjects for teaching are examined. The class teacher’s qualifying skills in teaching technical sloyd are expected to take shape during only a few ECTS study points. The teacher students’ experience of the subject from the pupil’s perspective is supposed to move into a budding teacher subject. In a research-based teacher education, self-reflection and reflection as a dialogue are extended aided by research results. Intuitive thinking interplays with rational thinking during this time. The teacher student’s approach to make use of the autonomous free space in teaching is, in the current thesis, as considerations where the individual weighs the pros and cons in relation to various phenomena in sloyd and the school overall. The basis for an individual autonomy is shaped and is expected to interplay on the common arena of autonomy. In the exercise of their profession, the class teacher teaching sloyd is expected to oscillate between the sloyd educational practice and theory. The first step in this movement within the teacher education is the coverage of a selection of theories during the studies. The empirical part of the study is carried out at two separate occasions with directed open-ended interviews with fifteen class teacher students in the beginning and end of their first year of study. The data was analysed with a hermeneutic approach and a qualitatively oriented approach to content analysis. The results are mirrored against theory within the science of sloyd education. The results show that class teacher students have a versatile view of educational sloyd. The overall results overthrow parts of the researcher’s pre-understanding. The viewpoint of the students seems to broaden from a merely manual activity to seeing sloyd as an educational activity. In order for the results to gain significance in the teacher education of the future, a line of reasoning is conducted in order to recommend an extended dialogue and thirteen possible themes for enriching discussions are put forth as a result of the present study. The extended dialogue focuses on that teacher education should make conscious ventures to create opportunities for the students to take part in effective discussions on the subject of sloyd, complementing the existing dialogue between the teacher educator and the students. This thesis lends support to reflections on the following aspects of educational sloyd in these dialogues: the reasons for why the sloyd subject exists, the ambitions of the subject, the content and organization of the subject for students as well as for the teacher educators.

Kaksi tietä huipulle. Media ja puoluejohtajuus Suomessa naisten noususta populismin aaltoon

Tässä väitöskirjassa tarkastellaan suomalaisen puoluejohtajuuden ja suuren puolueen johtajaksi nousun murroskautta 1980-luvun lopulta 2010-luvulle median ja politiikan vuorovaikutuksen näkökulmasta. Puolueiden johtaminen on myös Suomessa ollut miesten työtä, ja perinteisesti tehtävään on ollut yksi väylä: asettuminen ehdolle puheenjohtajavaalissa ja valituksi tulo puoluekokouksessa. Tarkastelujakson alkupuolella naisia oli Suomessa ensimmäistä kertaa ehdolla suurten puolueiden puheenjohtajavaaleissa. Kauden loppupuolella heitä myös valittiin tuohon tehtävään ja ensimmäiset naiset nousivat pääministeriksi. Tämä historiallinen murros päätti liki satavuotisen perinteen, jossa miehet ovat olleet Suomessa sekä suurten puolueiden että hallitustyön johtajia. Julkisessa keskustelussa kysymys tasa-arvosta jäi toissijaiseksi: naisia alettiin valita puoluejohtajiksi tilanteissa, joissa heidän valintansa nähtiin puolueille edulliseksi. Naisen valinta tulkittiin miehen valintaa merkittävämmäksi symboliseksi viestiksi, johon liitettiin ajatuksia uudistumisesta ja puolueen julkisuuskuvan parantamisesta. Merkille pantavaa on, että naisten ensimmäiset valinnat suurten puolueiden johtajiksi tapahtuivat vaiheessa, jossa puoluejohtajien valta-asema on vahvin kautta suomalaisen poliittisen historian. Tässä valossa näyttää siltä, että valta ei aina pakenekaan naisilta. Vaikka suomalainen yhteiskunta ja suomalaiset naiset ovat monessa mielessä olleet edelläkävijöitä tasa-arvon suhteen, politiikan johtopaikkoja tavoitelleet naiset ovat meilläkin kohdanneet kansainvälisessä tutkimuksessa naisten haasteeksi osoitettuja lasikattoja, pyöröovia ja liukkaita jyrkänteitä. Tutkittavan ajanjakson aikana konkretisoitui myös toinen mahdollinen, joskin poikkeuksellinen reitti suuren puolueen johtajaksi: pienen puolueen nouseminen suurten joukkoon eduskuntavaaleissa. Tämä vaihtoehto toteutui vuonna 2011 perussuomalaisten eduskuntavaalivoiton myötä. Perussuomalaisten nousu eduskunnan pienimmästä puolueesta kolmanneksi suurimmaksi mursi perinteisen kolmen suuren puolueen asetelman. Puolueen menestyksen seuraukset ovat olleet kauaskantoisemmat kuin ehkä ensin ajateltiin: perussuomalaisten vaalivoiton sosiaalidemokraateille, keskustalle, ja kokoomukselle aiheuttama järkytys heijastui myöhemmin myös niiden johtajavaihdoksiin ja -valintoihin. Sekä naisten läpimurrossa että populismin voittokulussa median rooli oli monisyisempi kuin siihen perinteisesti liitetty tiedon välittäjän ja valtaa pitävien toimia kriittisesti seuraavan neljännen valtiomahdin tehtävänkuva. Tutkittavalla jaksolla tiedotusvälineet tekivät onnistuneen intervention politiikan osapuoleksi. Toimittajat ottivat kantaa valintoihin ja ohjeistivat puolueita, ja puolueet taas mukauttivat näkyvyyden maksimoidakseen käytäntöjään median tarpeisiin. 1980-luvun lopulta 2010-luvulle ulottuvalla jaksolla suuren puolueen puoluejohtajaksi valikoitumisen kriteerit muuttuivat, samalla kun median merkitys johtajavalinnoissa ja myös puoluejohtajan käytännön työssä kasvoi. Mediasta tuli aiempaa konkreettisemmin johtajavalintojen ja valtakamppailun areena, ja siihen liittyvät näkökohdat nousivat myös keskeisiksi johtajan taitoja arvioitaessa. Kuka ehdokkaista toisi näkyvyyttä, ”pärjäisi” median paineissa ja vakuuttaisi äänestäjät? Vielä 1980- ja 1990-lukujen taitteessa johtajavalinnat olivat pitkälti puolueorganisaatioiden hallinnoimia prosesseja, joista lehdistö raportoi askeleen jäljessä kulkien. Viimeistään 2000-luvun ensimmäisellä vuosikymmenellä puolueet omaksuivat ajatuksen median hyödyllisyydestä. Tämän strategisen muutoksen myötä puolueet tulivat samalla luovuttaneeksi määriteltyvaltaa oman organisaationsa ulkopuolelle. Kokoomuksen vuoden 2014 johtajavaalissa silmiinpistävää oli pyrkimys sekä hyötyä julkisuudesta että palauttaa valtaa takaisin puolueelle. Politiikan mediajulkisuuden alttius tarttua myyviin poliitikkopersooniin, ilmiöihin, ristiriitoihin ja draamaan sekä vastaavasti populistijohtaja Timo Soinin ja perussuomalaisten kyky tarjota kaikkia näitä auttoivat puolueen suurvoittoon vuoden 2011 eduskuntavaaleissa. Organisaatioltaan pieni ja johtajaansa henkilöityvä puolue sai selvästi poliittista painoarvoaan suuremman julkisuuden, koska kiinnostavuus määritti näkyvyyden ja puolueen nousevasta kannatuksesta tuli yksi vaalien pääaiheista. Median ja politiikan suhteessa tapahtuneet muutokset olivat vauhdittamassa niin naisten nousua suurten puolueiden johtajiksi kuin populistisen johtajuuden läpimurtoa ja perussuomalaisten menestystä. Koska suurten puolueiden johtajista valikoituvat myös pääministerit, näiden muutosten vaikutus ulottuu Suomen poliittisesti vaikutusvaltaisimpaan tehtävään asti.

Microsatellite-dense genetic map: towards genome coverage in a tropical maize (Zea mays L.) population

Dense molecular genetic maps are used for an efficient quantitative trait loci (QTL) mapping and in the marker-assisted selection programs. A dense genetic map was generated with 139 microsatellite markers using 256 F2 plants generated by the crossing of two tropical maize inbred lines (L-02-03D and L-20-01F). This map presented 1,858.61 cM in length, where 10 linkage groups were found spanned, with an average interval of 13.47 cM between adjacent markers. Seventy seven percent of the maize genetic mapping bins were covered, which means an increase of 14% coverage in relation to the previous tropical maize maps. The results provide a more detailed and informative genetic map in a tropical maize population representing the first step to make possible the studies of genetic architecture to identify and map QTL and estimate their effects on the variation of quantitative traits, thus allowing the manipulation and use in tropical maize breeding programs.

Possibility of press forming wood films into primary packaging

In recent times the packaging industry is finding means to maximize profit. Wood used to be the most advantageous and everyday material for packaging, worktables, counters, constructions, interiors, tools and as materials and utensils in the food companies in the world. The use of wood has declined vigorously, and other materials like plastic, ceramic, stainless steel, concrete, and aluminum have taken its place. One way that the industry could reduce its cost is by finding possibilities of using wood for primary packaging after which it can be safely recycled or burned as a carbon source for energy. Therefore, the main objective of this thesis is to investigate the possibility of press-forming a wood film into primary packaging. In order to achieve the stated objectives, discussion on major characteristics of wood in terms of structure, types and application were studied. Two different wood species, pine and birch were used for the experimental work. These were provided by a local carpentry workshop in Lappeenranta and a workshop in Ruokolahti supervised by Professor Timo Kärki. Laboratory tests were carried out at Lappeenranta University of Technology FMS workshop on Stenhøj EPS40 M hydraulic C-frame press coupled with National Instruments VI Logger and on the Adjustable packaging line machine at LUT Packaging laboratory. The tests succeeded better on the LUT packaging line than on the Stenhoj equipment due to the integrated heating system in the machine. However, there is much work to be done before the quality of a tray produced from the wood film is comparable to that of the wood plastic composite tray.

Density, proportion, and dendritic coverage of retinal ganglion cells of the common marmoset (Callithrix jacchus jacchus)

We performed a quantitative analysis of M and P cell mosaics of the common-marmoset retina. Ganglion cells were labeled retrogradely from optic nerve deposits of Biocytin. The labeling was visualized using horseradish peroxidase (HRP) histochemistry and 3-3'diaminobenzidine as chromogen. M and P cells were morphologically similar to those found in Old- and New-World primates. Measurements were performed on well-stained cells from 4 retinas of different animals. We analyzed separate mosaics for inner and outer M and P cells at increasing distances from the fovea (2.5-9 mm of eccentricity) to estimate cell density, proportion, and dendritic coverage. M cell density decreased towards the retinal periphery in all quadrants. M cell density was higher in the nasal quadrant than in other retinal regions at similar eccentricities, reaching about 740 cells/mm² at 2.5 mm of temporal eccentricity, and representing 8-14% of all ganglion cells. P cell density increased from peripheral to more central regions, reaching about 5540 cells/mm² at 2.5 mm of temporal eccentricity. P cells represented a smaller proportion of all ganglion cells in the nasal quadrant than in other quadrants, and their numbers increased towards central retinal regions. The M cell coverage factor ranged from 5 to 12 and the P cell coverage factor ranged from 1 to 3 in the nasal quadrant and from 5 to 12 in the other quadrants. These results show that central and peripheral retinal regions differ in terms of cell class proportions and dendritic coverage, and their properties do not result from simply scaling down cell density. Therefore, differences in functional properties between central and peripheral vision should take these distinct regional retinal characteristics into account.

Representations of cultural encounters in the global business press – The importance of cross-cultural competence

This qualitative study has started from the interest to examine how the reality of crosscultural encounters is presented in the global business press. The research paper emphasizes different ways to classify culture and cross-cultural competency, both from the point of view of individuals and organizations. The analysis consists of public discourses, where cross-cultural realities are created through different persons, stories and contexts For data collection, a comprehensive database search was performed and 10 articles from the widely known worldwide business magazine The Financial Times were chosen as the data for the study paper. For the functions of addressing the research study questions, Thematic Content Analysis (TCA) and also Discourse Analysis (DA) are utilized, added with the continuous comparison method of grounded theory in the formation of the data.The academic references consist of literary works and articles presenting relevant concepts, creating a cross-cultural framework, and it is designed to assist the reader in the navigation through the topics of culture and cross-cultural competency. The repertoires were formed from the data and following, the first repertoire is contrast difference between home and target culture that the individual was able to discern. As a consequence of the first repertoire, the companies then offer cultural training to their employees to prepare them to situations of increasing levels of cultural variation. The third repertoire is increased awareness of other cultures, which is conveyed as a result of cultural training and contextual work experience. The fourth repertoire is globalization as an international business environment, where the people in the articles perform their job functions. It is stated in the conclusions that the representations emphasize Western values and personal traits in leadership.

Press forming of paperboard – advancement of converting tools and process control

Press forming is nowadays one of the most common industrial methods in use for producing deeper trays from paperboard. Demands for material properties like recyclability and sustainability have increased also in the packaging industry, but there are still limitations related to the formability of paperboard. A majority of recent studies have focused on material development, but the potential of the package manufacturing process can also be improved by the development of tooling and process control. In this study, advanced converting tools (die cutting tools and the press forming mould) are created for production scale paperboard tray manufacturing. Also monitoring methods that enable the production of paperboard trays with enhanced quality, and can be utilized in process control are developed. The principles for tray blank preparation, including creasing pattern and die cutting tool design are introduced. The mould heating arrangement and determination of mould clearance are investigated to improve the quality of the press formed trays. The effect of the spring back of the tray walls on the tray dimensions can be managed by adjusting the heat-related process parameters and estimating it at the mould design stage. This enables production speed optimization as the process parameters can be adjusted more freely. Real-time monitoring of pressing force by using multiple force sensors embedded in the mould structure can be utilized in the evaluation of material characteristics on a modified production machinery. Comprehensive process control can be achieved with a combination of measurement of the outer dimensions of the trays and pressing force monitoring. The control method enables detection of defects and tracking changes in the material properties. The optimized converting tools provide a basis for effective operation of the control system.

Factors Affecting Runnability of Press Forming Equipment

The growth of the food packaging industry has raised more interest in bio-based fibre packing. The use of petroleum based packages is unfriendly to the environment while bio-based is a sustainable option for food packing. In this Master Thesis the aim was to discover how the press forming machineries runnability is affected by parameters of the press and how it also affects formability of paperboard trays. Familiarisation of the working operation parameters was done with the KAMA ST 75 flat-bed die cutting machine and the VP3-70 mould press. Some small test runs of moulding trays where done to get acquainted to the adjustment parameters of the machines. Literature study was done on how paperboards physical properties react to the forces applied during press forming. The study of what kind of defects to the paperboard tray might occur during forming process and the causes for these defects. Also how the parameters of the press forming machine affects formability of the tray. Maintenance procedures was done to the press forming machine to enhance the reliably of production process. Tool alignment measurement was done to determine proper alignment. Laboratory test of the physical properties of the test material was done to find any connection to how the test material performs in press forming. An evaluation criterion was made to evaluate the dimensions and defects of the tray. From the test result a conclusion can be drawn on how the parameters of the press forming process affect the paperboard material. Based on the results the adjustment the parameters of moulding machines to the mechanical properties of paperboard it is possible to produce high quality fibre passed trays for the food packaging industry.

Leak-proof Heat Sealing of Press-Formed Paperboard Trays

Three-dimensional (3D) forming of paperboard and heat sealing of lidding films to trays manufactured by the press forming process are investigated in this thesis. The aim of the work was to investigate and recognize the factors affecting the quality of heat sealing and the leak resistance (tightness) of press-formed, polymer-coated paperboard trays heatsealed with a multi-layer polymer based lidding film. One target was to achieve a solution that can be used in food packaging using modified atmosphere packaging (MAP). The main challenge in acquiring adequate tightness properties for the use of MAP is creases in the sealing area of the paperboard trays which can act as capillary tubes and prevent leak-proof sealing. Several experiments were made to investigate the effect of different factors and process parameters in the forming and sealing processes. Also different methods of analysis, such as microscopic analysis and 3D-profilometry were used to investigate the structure of the creases in the sealing area, and to analyse the surface characteristics of the tray flange of the formed trays to define quality that can be sealed with satisfactory tightness for the use of MAP. The main factors and parameters that had an effect on the result of leak-proof sealing and must be adjusted accordingly were the tray geometry and dimensions, blank holding force in press forming, surface roughness of the sealing area, the geometry and depth of the creases, and the sealing pressure. The results show that the quality of press-formed, polymer-coated paperboard trays and multi-layer polymer lidding films can be satisfactory for the use of modified atmosphere packaging in food solutions. Suitable tools, materials, and process parameters have to be selected and used during the tray manufacturing process and lid sealing process, however. Utilizing these solutions and results makes it possible for a package that is made mostly from renewable and recyclable sources to be a considerable alternative for packages made completely from oil based polymers, and to achieve a greater market share for fibre-based solutions in food packaging using MAP.

Nylon zipper and permanent press fabrics

An ad extolling the benefits of the Lightning Zephyr nylon zipper. This ad was directed towards the garment industry.

Press Pass

He was with the Brock University Student News Paper, "The Badger"

Brock Press Newsroom

The Brock Press newsroom located in the Glenridge Campus.