Tamanho relativo dos órgãos internos de zebuínos sob alimentação restrita e Ad libitum

Os efeitos do nível nutricional e da raça sobre o tamanho relativo dos órgãos internos foram estudados. Sessenta e três machos não-castrados, sendo 16 da raça Gir, 16 Guzerá, 16 Mocho de Tabapuã e 15 da raça Nelore, com idade média de 24 meses e pesos vivos médios iniciais de 376,4; 357,6; 362,0; e 368,6 kg, respectivamente, foram usados. Os animais de cada raça foram divididos, aleatoriamente, em cinco categorias. Uma categoria foi abatida imediatamente (AB); três categorias receberam ad libitum ração contendo 50% de concentrado na matéria seca (categoria 1, 2 e 3), em baias individuais; e uma categoria recebeu a mesma ração, em quantidade restrita, suprindo níveis de proteína e energia 15% acima da mantença (AR). Os animais das categorias 1, 2 e 3 foram abatidos ao atingirem pesos vivos individuais de 405, 450 e 500 kg, respectivamente. No abate, o peso de corpo vazio (PCVZ) foi determinado e os pesos dos órgãos internos e víscera foram registrados. Não houve diferenças entre raças nos pesos de fígado, baço, intestinos delgado e grosso, rúmen-retículo, omaso, estômagos e trato gastrintestinal (TGI), quando expressos em 100 kg de PCVZ. A restrição alimentar não influiu nos pesos do coração e dos pulmões, mas reduziu o peso do fígado e os componentes do TGI.

Desenvolvimento relativo dos tecidos ósseo, muscular e adiposo dos cortes da carcaça de cordeiros Santa Inês

O trabalho foi conduzido no Setor de Ovinocultura do Departamento de Zootecnia da UFLA, em Lavras, com o objetivo de estudar o crescimento alométrico dos tecidos ósseo, muscular e adiposo dos cortes comerciais em cordeiros. Foram utilizados 24 cordeiros machos inteiros da raça Santa Inês. Os animais foram submetidos a regime de confinamento e receberam alimentação ad libitum. O abate ocorreu quando os animais atingiram os pesos vivos de 15, 25, 35 e 45 kg. Após a carcaça ter sido limpa e resfriada, foram obtidos os cortes comerciais a partir da meia carcaça esquerda. A quantidade dos diferentes tecidos foram obtidos por intermédio da dissecação de perna, lombo, costeleta, costela/ fralda e paleta. O estudo do desenvolvimento relativo da composição tecidual foi feito por meio do modelo de HUXLEY (1932). Constatou-se crescimento heterogônico negativo (b < 1) para o tecido ósseo e heterogônico positivo (b > 1) para o tecido adiposo de todos os cortes. Quanto ao tipo de crescimento do tecido muscular da costela/fralda e paleta, foi verificado crescimento isogônico (b=1) deste tecido em relação aos cortes.

Crescimento relativo e composição do ganho de tecidos da carcaça de zebuínos de quatro raças

Utilizaram-se 64 machos não-castrados das raças Gir, Guzerá, Mocho de Tabapuã e Nelore. em cada raça, os animais foram divididos, aleatoriamente, em cinco categorias. Uma categoria foi abatida imediatamente, três receberam, em baias individuais, ração contendo 50% de concentrado na MS ad libitum (I, II e III) e uma recebeu a mesma ração, em quantidade restrita, suprindo níveis de proteína e energia 15% acima da mantença. Os animais I, II e III foram abatidos ao atingirem pesos vivos individuais de 405, 450 e 500 kg, respectivamente. Adotou-se a equação de regressão do logaritmo da quantidade corporal de carcaça e de seus tecidos (muscular, adiposo e ósseo), em função do logaritmo do peso de corpo vazio. Na carcaça, o tecido adiposo, ósseo e muscular tiveram maior impulso para crescimento em idade mais tardia, precoce e intermediário, respectivamente. A carcaça apresentou alometria positiva, refletindo o seu desenvolvimento proporcionalmente maior que o do peso corporal vazio.

Teores foliares de nutrientes, índice relativo de clorofila e teores de nitrato e de potássio na seiva do pecíolo na videira 'Niagara Rosada

A nutritional survey was carried out in 93 vineyards of the wine regions of Jundiai, Sao Miguel Arcanjo and Jales (state of São Paulo-Brazil), aiming to compare the nutrient concentration in leaf samples, the concentration of nitrate and potassium in the petiole sap and the relative chlorophyll index (IRC) of 'Niagara Rosada' vineyard. Leaves, blade and petiole in full bloom vines were sampled in 20 plants selected from each vineyard, and evaluations of the IRC in the leaf blade and the levels of NO3-and K in the petioles sap were realized. Macro and micronutrients concentrations were measured in leaf samples. The sampled vineyards were grouped by region of study, and each vineyard was considered as a replicate sample, totaling 45, 24 and 24 repetitions, in Jundiai, Sao Miguel Arcanjo and Jales, respectively. Sampled vineyards from the Jales region showed higher leaf concentrations of P, K, Ca, Mg, S, Fe and Mn, and also higher IRC and levels of nitrate and potassium in the petiole. These differences were related to the different rootstocks used, which were 'IAC 766', 'IAC 572' and 'Riparia of Traviu', respectively, for Jundiai, Jales and Sao Miguel Arcanjo. The differences highlight the need to adjust the concentration ranges of nutrients in leaf analysis, through regional trials, taking into account the rootstock and the region under study.

Influência do escoamento estático (CREEP) na dureza do amálgama. Efeito de ligas e regióes de medida.

The authors studied the CREEP of 5 amalgam alloys (1 conventional and 4 with high cooper) by the application os static load of 36 MPa in 478 mm specimens, 7 days old. After CREEP test, the samples were included in acrylic resin and Vickers hardness determined by three penetrations for each portion (cervical, medium and occlusal). Samples not submitted to the creep test was used with control. They concluded that no statistic difference was found in creep test but in Vickers test all the studied materials showed different hardness averages. The load application to samples increased the hardness of all the studied materials.

Posicionamento por ponto de alta precisão utilizando o GPS: Uma solução para a geodinâmica

Point positioning from GPS data can provide precision varying from 100 meters to a few millimeters at the level of 95% probability. To reach the best level of accuracy, users need proper equipment and software, as well as access capability to GPS products available at the International GPS Geodynamics Service. In this paper, the theory related to point positioning using GPS is presented as well as the results of an experiment conducted using data from the Brazilian Active Control System. The results show repeatability better than 5mm and 10mm for the N and E baseline components respectively, and 6mm + 4ppb (parts per billion) for the vertical. Comparison with SIRGAS campaign showed results at the same level of uncertainty as that of the stations used to tie the SIRGAS frame to ITRF94. Therefore, precise point positioning is a powerful tool to be used in applications requiring high level of precision, such as Geodynamics.

Precisão de plantas planialtimétricas em função do posicionamento de pontos em irradiadas de campo

The present experiment aimed to study the influence of point positioning in an irradiated field to produce a planialtimetric plant. A planialtimetric evaluation was carried out in a 14-acre experimental area with well-defined topographic variations. Planialtimetric maps were designed using manual procedures, Datageosis and Topoesalq. Datageosis built all the curves after numerical surface modeling. Topoesalq provided only height reports and the drawing of curves was done manually. The third method was a manual procedure. Because there were planialtimetry representation differences, longitudinal profiles were used in the sites where there was a great divergence among plants. When obtained profiles and plants were compared, it was verified that the one produced by Datageosis represented the relief plant better. Later, only the irradiated field points were evaluated and each point presented positioned readings before and after each relief map variation. The processing through the three methods resulted in significant plants of the local planialtimetry, according to the control profiles. It was concluded that the planning of the field procedure should be suitable to the posterior treatment method of obtained data in order to make a planialtimetric plant to accord to the evaluated local topography.

Correcão ionosférica utilizando os MAPAS: Globais do TEC DO IGS: Avaliação no posicionamento por ponto na região brasileira

One of the main drawbacks of the GPS accuracy for L1 users is the error due to ionosphere. This error depends on the total electron content presents in the ionosphere, as well as of the carrier frequency. Some models have been developed to correct GPS observables of the systematic error due to the ionosphere. The model more known and used is the Klobuchar model, which corrected 50-60% of the ionospheric error approximately. Alternatively, IGS (International GNSS Service) also has developed a model called Global Ionospheric Map (GIM). These maps, in format IONEX, are available in the site of the IGS, and one of the applications of them is to correct the GPS observables of the error due to ionosphere. This work aims at evaluating the quality of GPS point positioning using the IGS ionospheric model in the Brazilian region. Tests carried out had shown an average improvement in the horizontal and vertical determination of 72% and 26%, respectively, when GIM is used in the point positioning.

Modificação no posicionamento do paciente para o procedimento para prolapso e hemorroidas (PPH): Decúbito ventral com coxim e membros inferiores afastados

Our aim is to present a modification in patient placement on surgical table for the treatment of prolapsed hemorrhoids by using PPH technique. We propose a modified jackknife position for PPH procedure where the surgeon stays between patient's legs. The modified jackknife position may provide better surgical field with better view of the dentate line which facilitates pursestring confection. In Brazil, the majority of the surgeons prefer lithotomic position for PPH technique based on Longo's first reports. In our opinion, modified jackknife position provides both better surgical field for pursestring placement and better view of the staple line after PPH firing.

Sostenibilidad energética en América Latina y el Caribe: el aporte de las fuentes renovables

Incluye Bibliografía

Empresas de menor tamaño relativo: algunas características del caso brasileño

Incluye Bibliografía

Posicionamento de Extratores de Cápsula Porosa em Solo Arenoso Na Citricultura Fertirrigada Por Gotejamento

The efficiency of monitoring fertigation by means of porous capsule extractors is directly related to its correct placement, since the nutrients applied through fertigation have different mobility throughout the soil profile. The objective of this study was to evaluate the distributions of NO3, P, and K in the soil solution, when applied in citrus in sandy soil through drip fertigation systems, aiming to define the proper placement of the solution extractors. In order to measure the concentration of ions in the soil solution, the extractors were installed at four different distances (5, 15, 25, and 35 cm) and depths (15, 30, 60, and 90 cm) with an emitter located under the projection of the tree canopy. The experiment was conducted in a Valencia orange orchard on citrumelo Swingle rootstock, in Reginópolis/SP. The experimental design was randomized blocks and the treatment arrangement was a 4 x 4 factorial design with five repetitions. Sixteen soil solution extractors were installed per block, with a total of 80 extractors in the experiment. According to the obtained results, to determine P and K, it is recommended to install the solution extractor at 15 cm horizontal and 30 cm depth from the emitter. For NO3, the extractor recommended placement is 25 cm horizontal and 30 cm depth. The soil solution extractor proved to be a sensitive tool, capable of determining the ions mobility in the wet bulb.