Lateral open bite: Treatment and stability

Because of their multifactorial etiologies, dental and skeletal open bites are among the most difficult malocclusions to treat to a successful and stable result. Etiologic factors include vertical maxillary excess, skeletal pattern, abnormalities in dental eruption, and tongue-thrust problems. The purpose of this article was to report the treatment of an adult patient with a lateral open bite and a unilateral posterior crossbite. The treatment involved nonextraction therapy, including intermaxillary elastics, to obtain dentoalveolar extrusion in the region of the lateral open bite. The treatment results were successful and remained stable 2 years later. (Am J Orthod Dentofacial Orthop 2010;137:701-11)

A comparison of the clinical anesthetic efficacy of 4% articaine and 0.5% bupivacaine (both with 1 : 200,000 epinephrine) for lower third molar removal

Objective: This study compared the clinical efficacy of 4% articaine (A200) and 0.5% bupivacaine (B200), both with 1: 200,000 epinephrine, for lower third molar removal. Study design: Fifty patients underwent removal of symmetrically positioned lower third molars, in 2 separate appointments, under local anesthesia either with A200 or B200, in a double-blind, randomized, and crossover manner. Time to onset, duration of postoperative analgesia, duration of anesthetic action on soft tissues, intraoperative bleeding, and hemodynamic parameters were evaluated. Results: A statistically significant difference between the time to onset of A200 (1.66 +/- 0.13 minutes) and B200 (2.51 +/- 0.21 minutes) was found (P < .05). There was no statistically significant difference in the duration of analgesia, whether the patient was subjected to osteotomy or not, regardless of the local anesthetic used (3 to 4 hours; P < .05). However, when patients received B200 they experienced a statistically significant longer period of anesthesia on the soft tissues as compared with when they had received A200 (around 5 hours and 4 hours, respectively, P < .05). The surgeon`s rating of intraoperative bleeding was considered very close to minimal for both anesthetics. In the surgeries with osteotomy, the comparison between A200 and B200 showed statistically significant differences in the diastolic (64 mm Hg and 68 mm Hg, respectively, P = .001) and mean arterial pressure (86 mm Hg and 89 mm Hg, respectively, P = .031) when data from all the surgical phases were pooled. Additionally, the mouth opening at the suture removal was statistically different for A200 and B200 solutions (91.90% +/- 3.00% and 88.57% +/- 2.38% of the preoperative measure, respectively) when surgeries required bone removal (P < .05). Conclusions: In comparison with 0.5% bupivacaine, 4% articaine (both with 1: 200,000 epinephrine) provided a shorter time to onset and comparable hemostasis and postoperative pain control with a shorter duration of soft tissue anesthesia in lower third molar removal.

The draft genome of Ciona intestinalis: Insights into chordate and vertebrate origins

The first chordates appear in the fossil record at the time of the Cambrian explosion, nearly 550 million years ago. The modern ascidian tadpole represents a plausible approximation to these ancestral chordates. To illuminate the origins of chordate and vertebrates, we generated a draft of the protein-coding portion of the genome of the most studied ascidian, Ciona intestinalis. The Ciona genome contains similar to16,000 protein-coding genes, similar to the number in other invertebrates, but only half that found in vertebrates. Vertebrate gene families are typically found in simplified form in Ciona, suggesting that ascidians contain the basic ancestral complement of genes involved in cell signaling and development. The ascidian genome has also acquired a number of lineage-specific innovations, including a group of genes engaged in cellulose metabolism that are related to those in bacteria and fungi.

Planejamento estrat??gico governamental em contexto democr??tico: li????es da Am??rica Latina

Livro sobre Planejamento Estrat??gico, decorrente de curso do mesmo nome, realizado na ENAP em 2013, em parceria com o Centro Latino Americano de Administra????o para o Desenvolvimento (CLAD)

Intraempreendedorismo e a inova????o na gest??o p??blica federal

O objetivo deste artigo ?? apresentar tr??s a????es empreendedoras em organiza????es p??blicas premiadas pela ENAP no concurso Inova????o na Gest??o P??blica Federal. A partir da revis??o de literatura e estudo de caso, ser??o confrontados os diversos tipos e modelos de processos de inova????o, para identificar as dificuldades apontadas e as solu????es adotadas nas a????es premiadas. Foram selecionados tr??s casos de iniciativas inovadoras no INSS, apontando a origem, caracter??sticas, amplitude e o modelo do processo. Nosso quadro te??rico de refer??ncia est?? estruturado no sentido de aprofundar a percep????o, bem como nos dar condi????es de comparar alguns estudos e apontar lacunas, se existentes. A pesquisa foi realizada por meio de metodologia qualitativa, explorat??ria e adotando a estrat??gia de investiga????o do estudo de caso. A revis??o de literatura teve como objetivo identificar o que se encontra dispon??vel em livros, artigos, teses e, inclusive, experi??ncias. A conclus??o alcan??ada no artigo ?? a de que, apesar dos alegados entraves e limita????es, o intraempreendedorismo se faz presente nas organiza????es p??blicas e vem crescentemente sendo adotado pelas chefias ou mesmo por funcion??rios sem nenhum tipo de fun????o comissionada, como relatado em um dos casos. A inova????o nas organiza????es p??blicas, representada pelo intraempreendedorismo das experi??ncias premiadas pelo concurso, confirma nosso quadro te??rico na medida em que a????es empreendedoras geradoras de inova????o se fazem presentes nas organiza????es p??blicas, em todos os seus processos e meios.

Thermal degradation of Pb(Zr0.53Ti0.47)O3/poly(vinylidene fluoride) composites as a function of ceramic grain size and concentration

Poly(vinylidene fluoride)/Pb(Zr0.53Ti0.47)O3,([PVDF]1−x/[PZT]x) composites of volume fractions x and (0–3) type connectivity were prepared in the form of thin films. PZT powders with average grain sizes of 0.2, 0.84, and 2.35 μm in different volume fraction of PZT up to 40 % were mixed with the polymeric matrix. The influence of the inorganic particle size and its content on the thermal degradation properties of the composites was then investigated by means of thermo-gravimetric analysis. It is observed that filler size affects more than filler concentration the degradation temperature and activation energy of the polymer. In the same way and due to their larger specific area, smaller particles leave larger solid residuals after the polymer degradation. The polymer degradation mechanism is not significantly modified by the presence of the inorganic fillers. On the other hand, an inhibition effect occurs due to the presence of the fillers, affecting particularly the activation energy of the process.

Gestão da terceirização no setor brasileiro de distribuição de energia elétrica

O setor brasileiro de distribuição de energia elétrica expandiu a terceirização para toda a cadeia de valor, incluindo serviços diretamente ligados ao core business das empresas. Diante desse cenário, este trabalho tem como objetivo analisar os modelos da gestão da terceirização desenvolvidos por duas distribuidoras brasileiras de energia elétrica. Foram realizadas visitas e entrevistas in loco, com stakeholders das distribuidoras e das empresas terceirizadas. A principal contribuição é que a terceirização requer níveis mais elaborados de gestão, sugerindo a expansão da capacidade técnico-gerencial da empresa.

Acompanhamento da execução de instalações técnicas e acabamentos nos edifícios de habitação do "Condomínio Oriente"

Neste relatório descreve-se o trabalho desenvolvido no âmbito do estágio curricular relativamente ao acompanhamento da execução de instalações técnicas e acabamentos na construção de um edifício, com a finalidade de conclusão do curso de Mestrado em Engenharia Civil. O estágio, com duração de quatro meses, desenrolou-se entre Fevereiro e Junho de 2011 na empresa Obriverca. Consistiu no acompanhamento da obra do “Condomínio Oriente” inserida no “Multiusos do Oriente”, em construção na freguesia de Moscavide, concelho de Loures, sendo o orientador do estágio na empresa, o Eng.º Luís Laborinho, Director da Obra em causa. Tendo como objectivos primordiais do estágio curricular a consolidação das matérias e temas abordados na vertente académica, assim como o contacto com a realidade do mundo laboral, estes foram obtidos realizando um acompanhamento regular das frentes de trabalho referentes à execução das instalações técnicas e acabamentos, focando a atenção em duas fases distintas: inicialmente na execução da rede de distribuição de águas; rede de drenagem predial; aquecimento, ventilação e ar condicionado; instalações eléctricas e rede de combate a incêndios; na execução dos acabamentos em paredes exteriores e interiores, pavimentos e tectos.

Reported missing - learners in SLA/EFL research

Versão integral da revista no link do editor

Factors related with adiponectinemia in obese and normal-weight women and with its variation in weight loss programs

Objective: To assess different factors influencing adiponectinemia in obese and normal-weight women; to identify factors associated with the variation (Δ) in adiponectinemia in obese women following a 6-month weight loss program, according to surgical/non-surgical interventions. Methods: We studied 100 normal-weight women and 112 obese premenopausal women; none of them was on any medical treatment. Women were characterized for anthropometrics, daily macronutrient intake, smoking status, contraceptives use, adiponectin as well as IL-6 and TNF-α serum concentrations. Results: Adiponectinemia was lower in obese women (p < 0.001), revealing an inverse association with waist-to-hip ratio (p < 0.001; r = –0.335). Normal-weight women presented lower adiponectinemia among smokers (p = 0.041); body fat, waist-to-hip ratio, TNF-α levels, carbohydrate intake, and smoking all influence adiponectinemia (r 2 = 0.436). After weight loss interventions, a significant modification in macronutrient intake occurs followed by anthropometrics decrease (chiefly after bariatric procedures) and adiponectinemia increase (similar after surgical and non-surgical interventions). After bariatric intervention, Δ adiponectinemia was inversely correlated to Δ waist circumference and Δ carbohydrate intake (r 2 = 0.706). Conclusion: Anthropometrics, diet, smoking, and TNF-α levels all influence adiponectinemia in normal-weight women, although explaining less than 50% of it. In obese women, anthropometrics modestly explain adiponectinemia. Opposite to non-surgical interventions, after bariatric surgery adiponectinemia increase is largely explained by diet composition and anthropometric changes.

Arquitetura da informação pervasiva

Pós-graduação em Ciência da Informação - FFC

Specification of software architecture reconfiguration

In the past years, Software Architecture has attracted increased attention by academia and industry as the unifying concept to structure the design of complex systems. One particular research area deals with the possibility of reconfiguring architectures to adapt the systems they describe to new requirements. Reconfiguration amounts to adding and removing components and connections, and may have to occur without stopping the execution of the system being reconfigured. This work contributes to the formal description of such a process. Taking as a premise that a single formalism hardly ever satisfies all requirements in every situation, we present three approaches, each one with its own assumptions about the systems it can be applied to and with different advantages and disadvantages. Each approach is based on work of other researchers and has the aesthetic concern of changing as little as possible the original formalism, keeping its spirit. The first approach shows how a given reconfiguration can be specified in the same manner as the system it is applied to and in a way to be efficiently executed. The second approach explores the Chemical Abstract Machine, a formalism for rewriting multisets of terms, to describe architectures, computations, and reconfigurations in a uniform way. The last approach uses a UNITY-like parallel programming design language to describe computations, represents architectures by diagrams in the sense of Category Theory, and specifies reconfigurations by graph transformation rules.

Spectroscopic characterization of a novel 2 /[4Fe /4S] ferredoxin isolated from Desulfovibrio desulfuricans ATCC 27774

Inorganica Chimica Acta 356 (2003) 215-221

Dynamic peripheral visual performance relates to alpha activity in soccer players

Many studies have demonstrated the relationship between the alpha activity and the central visual ability, in which the visual ability is usually assessed through static stimuli. Besides static circumstance, however in the real environment there are often dynamic changes and the peripheral visual ability in a dynamic environment (i.e., dynamic peripheral visual ability) is important for all people. So far, no work has reported whether there is a relationship between the dynamic peripheral visual ability and the alpha activity. Thus, the objective of this study was to investigate their relationship. Sixty-two soccer players performed a newly designed peripheral vision task in which the visual stimuli were dynamic, while their EEG signals were recorded from Cz, O1, and O2 locations. The relationship between the dynamic peripheral visual performance and the alpha activity was examined by the percentage-bend correlation test. The results indicated no significant correlation between the dynamic peripheral visual performance and the alpha amplitudes in the eyes-open and eyes-closed resting condition. However, it was not the case for the alpha activity during the peripheral vision task: the dynamic peripheral visual performance showed significant positive inter-individual correlations with the amplitudes in the alpha band (8-12 Hz) and the individual alpha band (IAB) during the peripheral vision task. A potential application of this finding is to improve the dynamic peripheral visual performance by up-regulating alpha activity using neuromodulation techniques.

Evaluation of tools and cutting conditions on carbon fibre reinforced laminates

The distinctive characteristics of carbon fibre reinforced plastics, like low weight or high specific strength, had broadened their use to new fields. Due to the need of assembly to structures, machining operations like drilling are frequent. In result of composites inhomogeneity, this operation can lead to different damages that reduce mechanical strength of the parts in the connection area. From these damages, delamination is the most severe. A proper choice of tool and cutting parameters can reduce delamination substantially. In this work the results obtained with five different tool geometries are compared. Conclusions show that the choice of an adequate drill can reduce thrust forces, thus delamination damage.