Techno-Economic Assessment of LNG and Diesel Production and Global Trading Based on Hybrid PV-Wind Power Plants and PtG, GtL and PtL Technologies

With growing demand for liquefied natural gas (LNG) and liquid transportation fuels, and concerns about climate change and causes of greenhouse gas emissions, this master’s thesis introduces a new value chain design for LNG and transportation fuels and respective fundamental business cases based on hybrid PV-Wind power plants. The value chains are composed of renewable electricity (RE) converted by power-to-gas (PtG), gas-to-liquids (GtL) or power-to-liquids (PtL) facilities into SNG (which is finally liquefied into LNG) or synthetic liquid fuels, mainly diesel, respectively. The RE-LNG or RE-diesel are drop-in fuels to the current energy system and can be traded everywhere in the world. The calculations for the hybrid PV-Wind power plants, electrolysis, methanation (H2tSNG), hydrogen-to-liquids (H2tL), GtL and LNG value chain are performed based on both annual full load hours (FLh) and hourly analysis. Results show that the proposed RE-LNG produced in Patagonia, as the study case, is competitive with conventional LNG in Japan for crude oil prices within a minimum price range of about 87 - 145 USD/barrel (20 – 26 USD/MBtu of LNG production cost) and the proposed RE-diesel is competitive with conventional diesel in the European Union (EU) for crude oil prices within a minimum price range of about 79 - 135 USD/barrel (0.44 – 0.75 €/l of diesel production cost), depending on the chosen specific value chain and assumptions for cost of capital, available oxygen sales and CO2 emission costs. RE-LNG or RE-diesel could become competitive with conventional fuels from an economic perspective, while removing environmental concerns. The RE-PtX value chain needs to be located at the best complementing solar and wind sites in the world combined with a de-risking strategy. This could be an opportunity for many countries to satisfy their fuel demand locally. It is also a specific business case for countries with excellent solar and wind resources to export carbon-neutral hydrocarbons, when the decrease in production cost is considerably more than the shipping cost. This is a unique opportunity to export carbon-neutral hydrocarbons around the world where the environmental limitations on conventional hydrocarbons are getting tighter.

Examining Factors Affecting Attitudes toward Nuclear Power in Taiwan

Thesis (Master's)--University of Washington, 2016-06

Conceptual Design of a Circulating Fluidized Bed Reactor as a Thermochemical Thermal Energy Storage System for Applications in Concentrated Solar Thermal Power Plants

Thesis (Master's)--University of Washington, 2016-08

Exergetic, energetic, economic and environmental evaluation of concentrated solar power plants in Libya

The PhD project addresses the potential of using concentrating solar power (CSP) plants as a viable alternative energy producing system in Libya. Exergetic, energetic, economic and environmental analyses are carried out for a particular type of CSP plants. The study, although it aims a particular type of CSP plant – 50 MW parabolic trough-CSP plant, it is sufficiently general to be applied to other configurations. The novelty of the study, in addition to modeling and analyzing the selected configuration, lies in the use of a state-of-the-art exergetic analysis combined with the Life Cycle Assessment (LCA). The modeling and simulation of the plant is carried out in chapter three and they are conducted into two parts, namely: power cycle and solar field. The computer model developed for the analysis of the plant is based on algebraic equations describing the power cycle and the solar field. The model was solved using the Engineering Equation Solver (EES) software; and is designed to define the properties at each state point of the plant and then, sequentially, to determine energy, efficiency and irreversibility for each component. The developed model has the potential of using in the preliminary design of CSPs and, in particular, for the configuration of the solar field based on existing commercial plants. Moreover, it has the ability of analyzing the energetic, economic and environmental feasibility of using CSPs in different regions of the world, which is illustrated for the Libyan region in this study. The overall feasibility scenario is completed through an hourly analysis on an annual basis in chapter Four. This analysis allows the comparison of different systems and, eventually, a particular selection, and it includes both the economic and energetic components using the “greenius” software. The analysis also examined the impact of project financing and incentives on the cost of energy. The main technological finding of this analysis is higher performance and lower levelized cost of electricity (LCE) for Libya as compared to Southern Europe (Spain). Therefore, Libya has the potential of becoming attractive for the establishment of CSPs in its territory and, in this way, to facilitate the target of several European initiatives that aim to import electricity generated by renewable sources from North African and Middle East countries. The analysis is presented a brief review of the current cost of energy and the potential of reducing the cost from parabolic trough- CSP plant. Exergetic and environmental life cycle assessment analyses are conducted for the selected plant in chapter Five; the objectives are 1) to assess the environmental impact and cost, in terms of exergy of the life cycle of the plant; 2) to find out the points of weakness in terms of irreversibility of the process; and 3) to verify whether solar power plants can reduce environmental impact and the cost of electricity generation by comparing them with fossil fuel plants, in particular, Natural Gas Combined Cycle (NGCC) plant and oil thermal power plant. The analysis also targets a thermoeconomic analysis using the specific exergy costing (SPECO) method to evaluate the level of the cost caused by exergy destruction. The main technological findings are that the most important contribution impact lies with the solar field, which reports a value of 79%; and the materials with the vi highest impact are: steel (47%), molten salt (25%) and synthetic oil (21%). The “Human Health” damage category presents the highest impact (69%) followed by the “Resource” damage category (24%). In addition, the highest exergy demand is linked to the steel (47%); and there is a considerable exergetic demand related to the molten salt and synthetic oil with values of 25% and 19%, respectively. Finally, in the comparison with fossil fuel power plants (NGCC and Oil), the CSP plant presents the lowest environmental impact, while the worst environmental performance is reported to the oil power plant followed by NGCC plant. The solar field presents the largest value of cost rate, where the boiler is a component with the highest cost rate among the power cycle components. The thermal storage allows the CSP plants to overcome solar irradiation transients, to respond to electricity demand independent of weather conditions, and to extend electricity production beyond the availability of daylight. Numerical analysis of the thermal transient response of a thermocline storage tank is carried out for the charging phase. The system of equations describing the numerical model is solved by using time-implicit and space-backward finite differences and which encoded within the Matlab environment. The analysis presented the following findings: the predictions agree well with the experiments for the time evolution of the thermocline region, particularly for the regions away from the top-inlet. The deviations observed in the near-region of the inlet are most likely due to the high-level of turbulence in this region due to the localized level of mixing resulting; a simple analytical model to take into consideration this increased turbulence level was developed and it leads to some improvement of the predictions; this approach requires practically no additional computational effort and it relates the effective thermal diffusivity to the mean effective velocity of the fluid at each particular height of the system. Altogether the study indicates that the selected parabolic trough-CSP plant has the edge over alternative competing technologies for locations where DNI is high and where land usage is not an issue, such as the shoreline of Libya.

Assessment of positive parenting programmes in the Autonomous Region of the Basque Country (Spain)

This paper presents the results of a study aimed at identifying and assessing positive parenting programmes and activities carried out in the Autonomous Region of the Basque Country (ARBC), Spain. The study is a development of the III Inter-institutional Family Support Plan (2011), drafted by the Basque Government's Department of Family Policy and Community Development, and its aim is to offer a series of sound criteria for improving existing programmes and ensuring the correct design and implementation of new ones in the future. It analyses 129 programmes and gathers data relative to institutional management and coordination, format, quality of the established aims, adaptation to the theoretical proposal for an Optimal Positive Parenting Curriculum, scientific base, use of the framework of reference for competences, working method, assessment techniques, budgets and publicity, among others. The results highlight the good quality of the programmes' aims and content, and the poor systematic assessment of these same aspects. The study concludes with a series of recommendations for improving the initiatives, integrated into a proposal for a system of indicators to assess and implement positive parenting programmes.

Traditional part-time grazing: a more sustainable sheep milk and cheese production in the Basque Country

[EN] The concept of sustainability when referring to food production rests, in general, on 3 main aspects: 1) respect for the environment; 2) economic and social benefits for all involved in production; and 3) production of sufficient quantity of quality food at an accessible price. In this contribution we focus on the main aspects of the traditional sheep's milk and cheese production (under the Denomination of Origin Idiazabal Cheese) in the Basque Country that contribute primarily to its sustainability. It is based on the local latxa or carranzana breeds of sheep, adapted to the mountainous terrain. The sheepherder takes advantage of local resources to reduce management costs by combining indoor dry forage and concentrates with outdoor grazing throughout lactation, according to local pasture availability, and thus avoiding having to buy large amounts of feed. This system facilitates recycling of manure, fertilising pastures and forest at the same time. Use of local breeds helps maintain biodiversity of sheep breeds. Cheese is produced industrially (44.5% of the total cheese produced in 2008) from milk of many flocks, or artisanally (38.3%) by the sheepherders with the milk from their own flocks. Transforming their own milk into cheese is advantageous for the following reasons: 1) higher economic returns as compared to selling the milk to cheese factories because cheese price directly sold to consumers is more competitive than industrial cheese sold in supermarkets; 2) increases the value of women's work (over 80% of the cheese makers are women) in the community and their self-esteem; 3) it creates rural jobs and contributes to rural development; 4) we have demonstrated both with experimental and commercial flocks that part-time grazing allows the sheepherder to obtain high yields of milk, and cheese, of high nutritional and functional quality. Currently a less sustainable, intensive sheep's milk production with foreign, imported breeds kept indoors constantly is gaining favour among milk producers because of its perceived higher economic profitability.

MULTI-UNIT ACCIDENT CONTRIBUTIONS TO U.S. NUCLEAR REGULATORY COMMISSION QUANTITATIVE HEALTH OBJECTIVES: A SAFETY GOAL POLICY ANALYSIS USING MODELS FROM STATE-OF-THE-ART REACTOR CONSEQUENCE ANALYSES

The U.S. Nuclear Regulatory Commission implemented a safety goal policy in response to the 1979 Three Mile Island accident. This policy addresses the question “How safe is safe enough?” by specifying quantitative health objectives (QHOs) for comparison with results from nuclear power plant (NPP) probabilistic risk analyses (PRAs) to determine whether proposed regulatory actions are justified based on potential safety benefit. Lessons learned from recent operating experience—including the 2011 Fukushima accident—indicate that accidents involving multiple units at a shared site can occur with non-negligible frequency. Yet risk contributions from such scenarios are excluded by policy from safety goal evaluations—even for the nearly 60% of U.S. NPP sites that include multiple units. This research develops and applies methods for estimating risk metrics for comparison with safety goal QHOs using models from state-of-the-art consequence analyses to evaluate the effect of including multi-unit accident risk contributions in safety goal evaluations.

Monitoring system for small sized photovoltaic power plants

This paper presents a monitoring system devoted to small sized photovoltaic (PV) power plants. The system is characterized by: a high level of integration; a low cost, when compared to the cost of the PV system to be monitored; and an easy installation in the majority of the PV plants with installed power of some kW. The system is able to collect, store, process and display electrical and meteorological parameters that are crucial when monitoring PV facilities. The identification of failures in the PV system and the elaboration of performance analysis of such facilities are other important characteristics of the developed system. The access to the information about the monitored facilities is achieved by using a web application, which was developed with a focus on the mobile devices. In addition, there is the possibility of an integration between the developed monitoring system and the central supervision system of Martifer Solar (a company focused on the development, operation and maintenance of PV systems).

Work domain analysis and sensors I: principles and simple example

In this paper we establish a foundation for understanding the instrumentation needs of complex dynamic systems if ecological interface design (EID)-based interfaces are to be robust in the face of instrumentation failures. EID-based interfaces often include configural displays which reveal the higher-order properties of complex systems. However, concerns have been expressed that such displays might be misleading when instrumentation is unreliable or unavailable. Rasmussen's abstraction hierarchy (AH) formalism can be extended to include representations of sensors near the functions or properties about which they provide information, resulting in what we call a sensor-annotated abstraction hierarchy. Sensor-annotated AHs help the analyst determine the impact of different instrumentation engineering policies on higher-order system information by showing how the data provided from individual sensors propagates within and across levels of abstraction in the AH. The use of sensor-annotated AHs with a configural display is illustrated with a simple water reservoir example. We argue that if EID is to be effectively employed in the design of interfaces for complex systems, then the information needs of the human operator need to be considered at the earliest stages of system development while instrumentation requirements are being formulated. In this way, Rasmussen's AH promotes a formative approach to instrumentation engineering. (C) 2002 Elsevier Science Ltd. All rights reserved.

Experimental thermal hydraulic studies on the enhancement of safety of LWRs

The safe use of nuclear power plants (NPPs) requires a deep understanding of the functioning of physical processes and systems involved. Studies on thermal hydraulics have been carried out in various separate effects and integral test facilities at Lappeenranta University of Technology (LUT) either to ensure the functioning of safety systems of light water reactors (LWR) or to produce validation data for the computer codes used in safety analyses of NPPs. Several examples of safety studies on thermal hydraulics of the nuclear power plants are discussed. Studies are related to the physical phenomena existing in different processes in NPPs, such as rewetting of the fuel rods, emergency core cooling (ECC), natural circulation, small break loss-of-coolant accidents (SBLOCA), non-condensable gas release and transport, and passive safety systems. Studies on both VVER and advanced light water reactor (ALWR) systems are included. The set of cases include separate effects tests for understanding and modeling a single physical phenomenon, separate effects tests to study the behavior of a NPP component or a single system, and integral tests to study the behavior of the whole system. In the studies following steps can be found, not necessarily in the same study. Experimental studies as such have provided solutions to existing design problems. Experimental data have been created to validate a single model in a computer code. Validated models are used in various transient analyses of scaled facilities or NPPs. Integral test data are used to validate the computer codes as whole, to see how the implemented models work together in a code. In the final stage test results from the facilities are transferred to the NPP scale using computer codes. Some of the experiments have confirmed the expected behavior of the system or procedure to be studied; in some experiments there have been certain unexpected phenomena that have caused changes to the original design to avoid the recognized problems. This is the main motivation for experimental studies on thermal hydraulics of the NPP safety systems. Naturally the behavior of the new system designs have to be checked with experiments, but also the existing designs, if they are applied in the conditions that differ from what they were originally designed for. New procedures for existing reactors and new safety related systems have been developed for new nuclear power plant concepts. New experiments have been continuously needed.

Ydinvoimalaitoksen tuotannon ylläpitoprosessin suorituskyvyn mittaaminen

Kilpailun kiristyminen on pakottanut ydinvoimalaitoksia parantamaan tehokkuuttaan etsimällä uusia toimintatapoja. Heräte työn teettämiseen syntyi tutkimuksen case-kohteen Loviisan voimalaitoksen kiinnostuksesta Balanced Scorecard (BSC) -johtamisjärjestelmää,sen käyttöönoton mahdollisia vaikutuksia sekä BSC:n ja prosessiajattelun yhdistämistä kohtaan. Tutkimuksen tavoitteena on rakentaa Loviisan voima-laitoksen tuotannon ylläpitoprosessille BSC-mittaristo. Tämä edellyttää selvitystä siitä, mitä erityispiirteitä ydinvoimalaitoksiin liittyy strategisen suorituskyvyn mittaamisen kohteena. Lisäksi tavoitteena on selvittää, mikä tulisi prosessikohtaisten tuloskorttien rooli olla Loviisan voimalaitoksen BSC-järjestelmässä. Tavoitteenaon myös muodostaa suositus toimintamallista, jolla BSC voitaisiin ottaa käyttöön Loviisan voimalaitoksella, sekä selvittää, mitä vaikutuksia käyttöönotolla voiolla. Ydinvoimalaitoksen erityispiirteitä ovat muutokset toimintaympäristössä, viranomais-valvonta, toiminnan pitkäjänteisyys, laaja osaamis- ja tietotarve sekä turvallisuuden ja tiettyjen sidosryhmäsuhteiden merkityksen korostuminen. Johtuen erityispiirteistä Kaplanin ja Nortonin alkuperäistä asiakasnäkökulmaa muutetaan kattamaan sidosryhmät laajemmin. Tuotannon ylläpitoprosessin tuloskortissa vähiten painottuva näkö-kulma on henkilöstön ja uudistumisen näkökulma. Osa laitostason kriittisistä menestystekijöistä todetaan prosessin kannalta epäolennaisiksi. Prosessikohtaiset tuloskortit osoittautuvat vaikeasti hyödynnettäviksi linjaorganisaation ohjaamisessa. Strategiakartta todetaan hyväksi työvälineeksi BSC:nlaadinnassa. Toivasen projektimalli arvioidaan sopivaksi välineeksi mahdolliseen BSC:n käyttöönottoon Loviisan voimalaitoksella. Henkilöstön rooli ja erityispiirteiden vaikutukset tulee kuitenkin tarkistaa ennen mallin käyttöä. BSC-järjestelmän käyttöönoton arvioidaan selkeyttävän voimalaitoksen mittaristokokonaisuutta sekä parantavan syy-seuraussuhteiden hahmottamista ja alempien tasojen tavoitteiden kytkentää laitostason tavoitteisiin.

Käytetyn ydinpolttoaineen kapselointilaitoksessa muodostuvat radioaktiiviset jätteet

Tässä työssä ontarkasteltu käytetyn ydinpolttoaineen kapselointilaitoksessa muodostuvia radioaktiivisia jätteitä. Kapselointilaitos rakennetaan Olkiluotoon joko Olkiluodon ydinvoimalaitoksen käytetyn ydinpolttoaineen välivaraston yhteyteen tai loppusijoituslaitokseen kytkettynä laitoksena. Työssä on otettu huomioon molemmat vaihtoehdot ja niiden eroavaisuudet prosessien ja jätemäärien osilta. Kaikki jäte, joka muodostuu kapselointilaitoksen valvonta-alueella, luokitellaan radioaktiiviseksi jätteeksi. Radioaktiivisia jätteitä muodostuu, kun käytetystä ydinpolttoaineesta irronneet radioaktiiviset aineet kontaminoivat laitoksen rakenteita ja laitteita. Muodostuvat radioaktiiviset jätteet kiinteytetään ja sijoitetaan loppusijoitustilan yhteyteen rakennettavaan käyttö- ja käytöstäpoisto-jäteluolaan. Hyvin vähäaktiivinen jäte voidaan vapauttaa valvonnasta aktiivisuusmittauksen jälkeen. Radioaktiivisia jätteitä muodostuu kapselointilaitoksen toiminnan aikana vähäisiä määriä verrattuna ydinvoimalaitoksiin. Vertailtaessa molempien kapselointilaitosvaihtoehtojen radioaktiivisten jätteiden määriä, ainoastaan loppusijoitettavan nestemäisten jätteiden määrässä on eroa.

Turvallisuustoimintojen käyttö ydinvoimalaitoksilla

Tässä diplomityössä tarkastellaan turvallisuustoiminto-käsitteen määrittelyä ja käyttöä osana ydinvoimalaitosten turvallisuuden varmistamista. Työssä kuvataan paine- ja kiehutusvesilaitosten toiminnan yleispiirteet, sekä Teollisuuden Voima Oy:n (TVO) laitosten Olkiluoto 1 & 2 sekä Olkiluoto 3 tarkempi turvallisuustoiminta turvallisuusjärjestelmien ja -automaation osalta. Työssä esitellään eräs tapa määrittää turvallisuustoimintoja. Malli perustuu hierarkkiseen rakenteeseen, jossa ylimpänä ovat laitostason turvallisuustoiminnot ja alimpana turvallisuustoimintoihin osallistuvien laitteiden ja niiden osien toiminnot. Turvallisuustoimintoja on mahdollista käyttää ydinvoimalaitoksen turvallisuusluokituksen tekemiseen ja perustelemiseen. Turvallisuustoiminto kertoo suoraan luokiteltavan kohteen turvallisuusmerkityksen. Kohteen turvallisuusmerkityksen selvittäminen, eli liittäminen turvallisuustoimintoon, voi olla vaikeaa. Turvallisuustoimintoja on myös mahdollista käyttää laitoksen turvallisuusautomaation riittävän varmistamisen (mm. redundanttisuus, diversiteetti ja erotus) osoittamiseen erityisesti ohjelmoitavan automaation yhteydessä. Turvallisuustoimintoja voidaan hyödyntää laitoksen hätätilanneohjeiden kehittämisessä ja myös laitoksenmuun turvallisuusdokumentaation selkeyttämisessä. Työn tuloksena kehitettiin käyville laitoksille (OL1 & 2) aikaisempaa kattavammat turvallisuustoiminnot. Lisäksi tarkasteltiin rakenteilla olevalle laitokselle (OL3) määriteltyjä turvallisuustoimintoja.

Todennäköisyyspohjaisen paloanalyysimenetelmän kehittäminen ydinvoimalaitoksella

Diplomityössä on tutustuttu ydinvoimalaitosten paloriskejä käsittelevään todennäköisyyspohjaiseen turvallisuusanalyysiin. Tavoitteena on ollut Olkiluoto 1 ja 2 laitosyksiköiden paloanalyysimenetelmän kehittäminen. Työssä esitetään paloanalyysin pääpiirteet, kaksi erilaista palotaajuuksien estimointimenetelmää sekä palojen leviämisen arviointimenetelmiä. Palotaajuuksien estimointimenetelmistä keskitytään Berryn menetelmän sekä NUREG/CR-6850-palotaajuuslaskentamenetelmän tarkasteluun. Palon leviämisen arvioinnissa on esitetty kolmen erilaisen virtausteknisen laskentatyökalun perusteet sekä palon leviämistodennäköisyyksiä arvioivan Probabilistic Fire Simulator (PFS) -ohjelman käyttöä. Työn aikana on laskettu molemmilla palotaajuuden estimointimenetelmillä palotaajuuksia eri tyyppisille huonetiloille. Berryn menetelmän palotaajuudet olivat pääosin alhaisempia kuin NUREG/CR-6850-menetelmällä lasketut palotaajuudet. Palon leviämistarkastelussa on tutkittu ydinvoimalaitoksen relehuoneen tulipaloa. PFS:n avulla laskettujen leviämistodennäköisyyksien arvoja on vertailtu TVO:n paloanalyysissa käytettyihin kvalitatiivisiin peittokertoimiin. Palon leviämistodennäköisyys eri osajärjestelmien välillä todettiin suuresti riippuvan analyysissaoletetuista vaurioitumislämpötiloista. Tutkittuja menetelmiä hyödyntäen diplomityössä kehitettiin paloanalyysimenetelmäkuvaus. Menetelmäkuvauksessa huonetilojen paloriskit kartoitetaan aluksi Berryn menetelmällä. Näin kaikille laitoksen huonetiloille saadaan arvioitua palotaajuus sekä paloalkutapahtumaluokkien sydänvauriotaajuus. Seuraavaksi suoritetaan valintamenettely, jossa valitut kriteerit täyttäville huonetiloille tehdään tarkentava palotaajuuslaskenta. Tarkentava palotaajuuslaskenta perustuu NUREG/CR-6850-menetelmän mukaisesti huonetilojen realistisiin syttymislähteisiin. Kriittisimpien huonetilojen osalta palon leviämisen arviointiin on tarkoitus hyödyntää numeerista simulointia.