A mixed-integer linear programming approach for optimal type, size and allocation of distributed generation in radial distribution systems

This paper presents a mixed-integer linear programming approach to solving the problem of optimal type, size and allocation of distributed generators (DGs) in radial distribution systems. In the proposed formulation, (a) the steady-state operation of the radial distribution system, considering different load levels, is modeled through linear expressions; (b) different types of DGs are represented by their capability curves; (c) the short-circuit current capacity of the circuits is modeled through linear expressions; and (d) different topologies of the radial distribution system are considered. The objective function minimizes the annualized investment and operation costs. The use of a mixed-integer linear formulation guarantees convergence to optimality using existing optimization software. The results of one test system are presented in order to show the accuracy as well as the efficiency of the proposed solution technique.© 2012 Elsevier B.V. All rights reserved.

Sealing ability of MTA used as a root end filling material: Effect of the sonic and ultrasonic condensation

Despite the excellent properties of mineral trioxide aggregate (MTA), the condensation technique may have some influence in its sealing ability. The purpose of this study was to compare the sealing ability of sonic and ultrasonic setting of MTA. Thirty-four extracted human teeth had their canals prepared and filled with Sealapex sealer and gutta-percha using the active lateral condensation technique. The teeth were rendered waterproof and apicoectomy performed at 3 mm from the apex. Root-end cavities (3.0 mm deep and 1.4 mm diameter) were prepared with diamond ultrasonic tips. The root-end cavities were filled with Pro-Root MTA® with ultrasonic vibration, sonic vibration or no vibration. The positive control group did not receive any material while the negative control group was totally rendered waterproof. After material set, the specimens were immersed in Rodhamine B for 24 h, under vacuum in the first 15 min, then washed, dried and split longitudinally for evaluating the infiltration at the dentin/material interface. Data were analyzed using ANOVA and Tukey's tests at 5% significance level. Sonic vibration promoted the lowest infiltration values (p<0.05). It was concluded that sonic vibration could be considered an efficient aid to improve the sealing ability of MTA when used as root-end filling material.

On the influence of the mode-shapes of a marine propulsion shafting system on the prediction of torsional stresses

Torsional vibration predictions and measurements of a marine propulsion system, which has both damping and a highly flexible coupling, are presented in this paper. Using the conventional approach to stress prediction in the shafting system, the numerical predictions and the experimental torsional vibration stress curves in some parts of the shafting system are found to be quite different. The free torsional vibration characteristics and forced torsional vibration response of the system are analyzed in detail to investigate this phenomenon. It is found that the second to fourth natural modes of the shafting system have significant local deformation. This results in large torsional resonant responses in different sections of the system corresponding to different engine speeds. The results show that when there is significant local deformation in the shafting system for different modes, then multi-point measurements should be made, rather than the conventional method of using a single measurement at the free end of the shaft, to obtain the full torsional vibration characteristics of the shafting system.

Semeadura de braquiária em consorciação com milho em diferentes espaçamentos na integração agricultura-pecuária em plantio direto

Pós-graduação em Agronomia - FEIS

Estabilidade da fitase e sua utilização na alimentação de frangos de corte

This work was designed to evaluate the effect of storage forms and conditions upon the enzyme activity of phytase and bioavaibility of calcium and phosphorus in broiler diets. The work was accomplished in two steps. The first step, made in the laboratory measured the activity of the phytase enzyme along the storage period. In this step, two experiments were performed: Experiment 1, constituted of 5 treatments (pure phytase stored at 0 °C, 4 °C and environmental temperature and mixed to vitamin and mineral supplement, stored at environmental temperature) in CRD and split plot scheme. The activities were evaluated every 14 days for 112 days of storage, being verified that the phytase storage in the pure form at 0o C was superior to the other treatments. Experiment 2, made up of 4 treatments (phytase mixed to the ration directly, directly and afterwards pelleted, via mineral supplement and via vitamin supplement),all the treatments being stored at environmental temperature, in CRD and split plot scheme. The activities were evaluated every 7 days for 56 days' storage, being verified that the storage of the phytase mixed to the ration via vitamin supplement and directly with the ration pelleted later, provoked a fall in phytase activity when compared with the other treatments. In the second step, the effect of phytase on the bioavaibility of calcium and phytic phosphorus was evaluated, 2 experiments being accomplished (3 and 4); in both experiments were utilized 576 broiler line chicks, housed in an array of heated batteries, receiving practical diets on the basis of corn and soybean meal (basal) for 21days. At the end of 27 days of age,96 birds were slaughtered for evaluation of the mineral contents (Ca and P) in the tíbias and plasma phosphorus. The excretae were collected from 22 to 27 days of age of the birds. Experiment 3: A CRD with the treatments in 2 x 3 x 2 +4 factorial arrangement was utilized, namely, two levels of total phosphorus (0.35 and 0.45% of total phosphorus), three leveis of phytase (500, 750 and 1,000 FTU) and four additional treatments with levels of 0.35 and 0.45 % of available phosphorus for each sex, with three replicates per treatment. There was significant interaction among levels of phosphorus and phytase (P< 0.05) for weight gain, ration consumption and feed conversion. Phytase did not indicate significant differences when the level 0.45% was utilized, nevertheless, at the level 0.35% as phytase was supplemented, weight gain, ration consumption and feed conversion were improved, chiefly with 1,000 FTU/Kg, in both sexes. The males presented greater weight gain. The ration consumption and feed conversion were equal to those of females. The contrast 0.45% did not affect the performance of males and females, the same not occurring with the level 0.35%,at which the available phosphorus was superior in both the sexes. The highest contents of ashes, phosphorus and calcium in the tíbias and plasma phosphorus were obtained with the levels of 750 and 1,000 FTU/Kg of phytase and 0.45% of total phosphorus. The males presented higher contents of ashes in the tibias. The level 0.45% of available phosphorus presented the greatest contents of ashes, calcium and phosphorus in the tibias, and phosphorus in the plasma. The lowest excretions of phosphorus occurred at the levels 0.35% of total phosphorus and 1,000FTU/kg of phytase. The lowest contents of ashes and calcium in the excretae were obtained with 0.35% and 1,000FTU/Kg of phytase. The females excreted smallest amounts of ashes, calcium and phosphorus than the males. Experiment 4: a CRD with the treatments in 3 x 4 x 2 factorial arrangement, namely, three levels of phytase (0, 500 and 1,000 FTU), four levels of calcium (0.7, 0.8, 0.9 and 1.0%) with four replicates per treatment. The performance was not affected by the treatments utilized, the males being superior to the females in weight gain, feed consumption and conversion. The contents of ashes in the tibias were not affected by the levels of phytase but as calcium levels raised, the ash contents increased. The contents of calcium and phosphorus in the tibias increased with the supplementation of 500 and 1,000 FTU/kg of phytase and with calcium levels. The utilization of phytase did not decrease the excretion of ashes, calcium and phosphorus.

Influência de materiais de cobertura e de alturas de cama, nos índices de conforto térmico e no desempenho de frangos de corte, em Dourados - MS

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Fisiologia e produção da soja tratada com cinetina e cálcio sob deficit hídrico e sombreamento

The objective of this work was to evaluate the effects of kinetin and calcium applications on the physiologic and productive traits of soybean plants, subjected to drought and shade conditions, at flowering. A randomized complete block design was used, in a split-plot arrangement, with four replicates. Soybean plants cultivated in 38 dm³ pots were sprayed with calcium and kinetin, alone or mixed, and subjected to drought and shade during 12 days. After stress period, plants were cultivated under appropriate water and light availability. Calcium and kinetin application resulted in maintenance of the relative water content after four days of drought beginning. Membrane damage, measured at the end of stress period, was lower in plants sprayed with calcium and kinetin. CO2 assimilation diminished by stress condition, mainly under drought, and grain yield decreased at the same intensity in both environments.

Influence of abutment-to-fixture design on reliability and failure mode of all-ceramic crown systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

B-mode Ultrasound and Doppler Mode for Early-stage Pregnancy Diagnosis in Shi-Tzu Bitches

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da eficácia de primers para metal na resistência ao cisalhamento da união entre cimentos resinosos e metais não nobres. Efeito do armazenamento em água

O sucesso das restaurações metálicas indiretas depende, dentre outros fatores, de uma união eficaz entre a estrutura metálica e o cimento dentário empregados. Sabe-se que os primers para metal atuam com comprovada eficácia na resistência adesiva dos cimentos resinosos às ligas nobres. Entretanto, pouco foi estudado sobre o efeito de tais materiais em ligas não nobres. O propósito deste estudo foi avaliar a eficácia de primers para metal na resistência ao cisalhamento da união entre cimentos resinosos e metais não nobres. Discos (9 mm de diâmetro e 3 mm de altura) foram fundidos em liga de NiCr (n=80) e em titânio comercialmente puro (Ti c.p.) (n=80) e foram incluídos em anel de PVC com resina acrílica quimicamente ativada. As superfícies dos discos foram regularizadas com lixas de carbeto de silício de granulação 320, 400 e 600 e jateadas com partículas de óxido de alumínio de 50 µm. Espécimes de cada metal foram divididos em quatro grupos (n=20). Uma matriz metálica bi-partida (5 mm de diâmetro interno e 2 mm de altura) foi posicionada na superfície do espécime. As áreas adesivas receberam um dos seguintes tratamentos: 1) Panavia F; 2) Alloy Primer e Panavia F; 3) Bistite DC e 4) Metaltite e Bistite DC. Para evitar a exposição dos cimentos à luz, estes foram espatulados e inseridos na matriz dentro de uma câmara de revelação radiográfica. Quarenta minutos após a confecção, os espécimes foram armazenados em água destilada a 37ºC por 24 horas e então termociclados (1.000 ciclos, 5ºC e 55ºC, 30 segundos cada banho). Após a termociclagem, os espécimes foram armazenados novamente nas mesmas condições descritas anteriormente por um período de 24 horas (n=10) ou de 6 meses (n=10) antes do ensaio de cisalhamento em uma máquina de ensaios mecânicos (Material Test System 810).

Análise estrutural de vigas treliçadas de aço com mesa de concreto

Pós-graduação em Engenharia Civil - FEIS

In vitro biomechanical comparison of six different fixation methods following 5-mm sagittal split advancement osteotomies

The sagittal split ramus osteotomy (SSRO) is a surgical technique used widely to treat many congenital and acquired mandibular discrepancies. Stabilization of the osteotomy site and the potential for skeletal relapse after the procedure are still major problems. The aim of this study was to compare the mechanical stability of six methods of rigid fixation in SSRO using a biomechanical test model. Sixty polyurethane replicas of human hemimandibles were divided into six groups. In group I, the osteotomies were fixed with two four-hole titanium miniplates; in group II, with one four-hole miniplate; in group III, with one four-hole miniplate + a bicortical screw; in group IV, with a grid miniplate; in group V, with a four-hole locking miniplate; and in group VI, with a six-hole miniplate. A linear load in the premolar region was applied to the hemimandibles. The resistance forces (N) needed to displace the distal segment by 1, 3, and 5 mm were recorded and the data transmitted from the load cell to a computer. One-way analysis of variance with Tukey's post hoc test was performed to compare the means between groups. For the three displacement conditions, there was a strong tendency for the 2.0-mm plate + screw and the grid plate to have higher values.

B-Mode and doppler sonography of the mammary glands in dairy goats for mastitis diagnosis

Contents This study aimed to evaluate the sonographic characteristics of the udder and teats and to determine the Doppler indexes of mammary artery in healthy and undergoing subclinical and clinical mastitis goats. Thirty animals among Saanen and Alpine Brown goats were arranged in three groups, healthy goats (HG), goats with subclinical mastitis (SMG) and goats with clinical mastitis (CMG). Using the B-mode, the sonographic characteristics (echotexture and echogenicity) and biometry (diameter and area of the udder cistern, diameter and area of the teat cistern and thickness of the teat wall) were evaluated. Using Doppler ultrasonography, the vascular indexes of the mammary artery were obtained. It was observed hyperechogenicity with solid component in the gland cistern when comparing animals with clinical mastitis and healthy mammary tissue. Regarding the echotexture of the breast tissue, there was heterogeneity in the mammary parenchyma on the three groups, for the milk, it was observed homogeneity for animals on HG and SMG and heterogeneity for animals on CMG. Grey-scale quantitative assessment revealed increase in echogenicity (mean value) for all the structures when comparing the three groups. Biometry did not reveal statistical difference between groups, for none of the evaluated structures. Doppler examination of the mammary artery showed the decrease of end diastolic velocity and raise of pulsatility index between groups. The association of B-mode and Doppler ultrasonography is useful for the evaluation of the udder of dairy goats with mastitis. It is a sensitive and specific method for the study of this disease. Doppler mode was unable to establish reliable criteria for diagnosis of subclinical mastitis. Moreover, the quantification of echogenicity is a useful technique for the evaluation of the milk in animals with mastitis; therefore, it is suggested that it can be used as complementary technique for the diagnosis of mastitis in goats.

The effect of polymerization mode on monomer conversion, free radical entrapment, and interaction with hydroxyapatite of commercial self-adhesive cements

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mixed-integer convex model for VAr expansion planning

This paper presents a mixed-integer convex-optimization-based approach for optimum investment reactive power sources in transmission systems. Unlike some convex-optimization techniques for the reactive power planning solution, in the proposed approach the taps settings of under-load tap-changing of transformers are modeled as a mixed-integer linear set equations. Are also considered the continuous and discrete variables for the existing and new capacitive and reactive power sources. The problem is solved for three significant demand scenarios (low demand, average demand and peak demand). Numerical results are presented for the CIGRE-32 electric power system.