Virtual-Build-to-Order as a Mass Customization Order Fulfilment Model

Virtual-build-to-order (VBTO) is a form of order fulfilment system in which the producer has the ability to search across the entire pipeline of finished stock, products in production and those in the production plan, in order to find the best product for a customer. It is a system design that is attractive to Mass Customizers, such as those in the automotive sector, whose manufacturing lead time exceeds their customers' tolerable waiting times, and for whom the holding of partly-finished stocks at a fixed decoupling point is unattractive or unworkable. This paper describes and develops the operational concepts that underpin VBTO, in particular the concepts of reconfiguration flexibility and customer aversion to waiting. Reconfiguration is the process of changing a product's specification at any point along the order fulfilment pipeline. The extent to which an order fulfilment system is flexible or inflexible reveals itself in the reconfiguration cost curve, of which there are four basic types. The operational features of the generic VBTO system are described and simulation is used to study its behaviour and performance. The concepts of reconfiguration flexibility and floating decoupling point are introduced and discussed.

Measuring and improving production efficiency of paint filling and packing line

Tutkittu yritys on suomalainen maaleja ja lakkoja kansainvälisesti valmistava ja myyvä toimija. Yrityksessä otettiin vuonna 2010 käyttöön uudet tuotannon ja toimitusketjun tavoitteet ja suunnitelmat ja tämä tutkimus on osa tuota kokonaisvaltaista kehittämissuuntaa. Tutkimuksessa käsitellään tuotannon ja kunnossapidon tehokkuuden parantamis- ja mittaustyökalu OEE:tä ja tuotevaihtoaikojen pienentämiseen tarkoitettua SMED -työkalua. Työn teoriaosuus perustuu lähinnä akateemisiin julkaisuihin, mutta myös haastatteluihin, kirjoihin, internet sivuihin ja yhteen vuosikertomukseen. Empiriaosuudessa OEE:n käyttöönoton ongelmia ja onnistumista tutkittiin toistettavalla käyttäjäkyselyllä. OEE:n potentiaalia ja käyttöönottoa tutkittiin myös tarkastelemalla tuotanto- ja käytettävyysdataa, jota oli kerätty tuotantolinjalta. SMED:iä tutkittiin siihen perustuvan tietokoneohjelman avulla. SMED:iä tutkittiin teoreettisella tasolla, eikä sitä implementoitu vielä käytäntöön. Tutkimustuloksien mukaan OEE ja SMED sopivat hyvin esimerkkiyritykselle ja niissä on paljon potentiaalia. OEE ei ainoastaan paljasta käytettävyyshäviöiden määrää, mutta myös niiden rakenteen. OEE -tulosten avulla yritys voi suunnata rajalliset tuotannon ja kunnossapidon parantamisen resurssit oikeisiin paikkoihin. Työssä käsiteltävä tuotantolinja ei tuottanut mitään 56 % kaikesta suunnitellusta tuotantoajasta huhtikuussa 2016. Linjan pysähdyksistä ajallisesti 44 % johtui vaihto-, aloitus- tai lopetustöistä. Tuloksista voidaan päätellä, että käytettävyyshäviöt ovat vakava ongelma yrityksen tuotannontehokkuudessa ja vaihtotöiden vähentäminen on tärkeä kehityskohde. Vaihtoaikaa voitaisiin vähentää ~15 % yksinkertaisilla ja halvoilla SMED:illä löydetyillä muutoksilla työjärjestyksessä ja työkaluissa. Parannus olisi vielä suurempi kattavimmilla muutoksilla. SMED:in suurin potentiaali ei välttämättä ole vaihtoaikojen lyhentämisessä vaan niiden standardisoinnissa.

influência da adição de diferentes sais em pastas de cimento portland para cimentação de poços de petróleo

One of the great challenges at present time related with the materials area concerns of products and processes for use in petroleum industry, more precisely related to the Pre-salt area. Progresses were reached in the last years allowing the drilling of the salt layer, with the time reduction for drilling and larger success at the end. For the oil wells companies the preponderant factor is the technology, however, in spite of the progress, a series of challenges is still susceptible to solutions and one of them refers to the slurries preparation for cementing in those areas. Inside of this context, this study had for objective to analyze the influence of the salts NaCl, KCl, CaSO4 and MgSO4 in strength and chemical structure of the hydrated products. As methodology, they were prepared and analyzed cement slurries with varied concentrations of these salts that are commonly found in the saline formations. The salts concentrations used in formulations of the slurries were of 5%, 15% and 30%. The slurries were formulated with specific weight of 15,8 lb / gal and the cement used was Class G. Strength tests were accomplished in samples cured by 24 hours and 28 days. Also were realized crystallographic characterization (XRD) and morphologic (SEM). In agreement with the presented results, it is observed that the largest resistance values are attributed to the slurries with concentration of 15%. There was reduction of the strength values of the slurries formulated with concentration of 30%. Through the characterization microstructural it was possible to note the salts influence in the main cement hydrated products

Management of industrialization projects

Short time-to-market is a key success factor in the todays’ dynamic business environment and many companies are trying to improve their product development processes. A challenge is to develop products according to the time plan and at the same time keeping the cost low and the quality high. This study focuses on the project management within the product development process in an automotive industry. The background of this study started as a request from the research and development department at the automotive company, which led to the following questions; 1) what are the most crucial factors for project success? 2) How can these factors contribute to a more successful outcome? 3) How can project management decrease product development lead time by sharing knowledge? The research approach is a case study and the data collection consist of interviews and questioners at two companies connected to project management in product development projects. Spider charts are created from the collected data containing eleven dimensions to show similarities and differences between the project managers working within the research and development department as well as between the two companies. The main conclusions are that there is a need to allow a certain level of flexibility when managing projects, in order to more easily handle late changes. Being involved in a project from the concept phase could facilitate the product development activities later on, due to a deeper understanding regarding previous decisions. Further, knowledge sharing methods, such as databases, has to be designed to be suitable for a specific organization and user friendly which enables the users to more easily search for specific types of knowledge. Lastly, a low level on the detailed focus is shown to be another success factor, however, in some cases there is still a need of this detailed focus to solve specific problems but the details may never become a higher focus than the holistic view.

Prospectiva del sector de calzado de cuero en Colombia, caso Calzado Yullyan

Este trabajo busca aplicar los conocimientos adquiridos para identificar los problemas que se presentan en la empresa “Calzado Yullyan” y obtener posibles soluciones para lograr un mejor desempeño de la organización en el sector. Se pretende determinar los posibles escenarios en los que la empresa se puede ver involucrada, de manera que se planteen soluciones que mejoren las actividades desarrolladas y permitan el crecimiento y fortalecimiento de la misma. Para este trabajo se realizó un análisis del sector teniendo en cuenta diferentes aspectos como la productividad, el comportamiento de las importaciones y las exportaciones, la cadena productiva, las fuerzas del mercado, entre otros.

"Razionalizzazione mediante VSM e tecniche Kaizen del flusso del valore nel processo produttivo di getti in ghisa: il caso Fonderie di Montorso S.p.a.”

La stesura del seguente elaborato di tesi è avvenuta simultaneamente all’inizio di un progetto Lean presso il plant produttivo, situato a Crevalcore (Bo), di Fonderie di Montorso Spa, azienda produttrice di getti in ghisa. Lo scopo del seguente elaborato è di descrivere l’implementazione di un progetto Lean in uno dei settori più antichi esistenti. Negli ultimi decenni, si è sentito molto parlare di Lean production in settori come quello dell’automotive ma, raramente, si sente parlare di lean thinking o kaizen in settori metalmeccanici. I processi produttivi tipici di una fonderia, infatti, sono difficilmente prevedibili e controllabili come può essere un processo di assemblaggio di componenti. Trasferire, dunque, un sistema di gestione della produzione, il Toyota Production System, nato in una linea di assemblaggio, in un settore con una grande quantità di vincoli di progettazione e produzione, è una sfida, una sfida necessaria per rispondere ad una situazione di estrema variabilità della domanda, in cui il mercato richiede i prodotti in maniera rapida e puntuale. Per rimanere, dunque, competitivi è necessario un cambiamento radicale, una rivisitazione di tutti i processi aziendali partendo dall’arrivo dell’ordine, alla spedizione dello stesso. Alla luce di ciò, nel corso della trattazione, sono state svolte analisi al fine di ridurre il Lead time di partenza da 18 a 4 settimane, ponendo molta attenzione al coinvolgimento delle persone, il vero motore del cambiamento. Le parole cardine di questo elaborato sono: standardizzazione dei processi, eliminazione dei colli di bottiglia, aumento della comunicazione tra le funzioni aziendali, prioritizzazione dei clienti e per ultimo, ma non per importanza, la valorizzazione del gemba.

Solid state micro and nanopore sensors for single entity detection

A general description of the work presented in this thesis can be divided into three areas of interest: micropore fabrication, nanopore modification, and their applications. The first part of the thesis is related to the novel, reliable, cost-effective, potable, mass-productive, robust, and ease of use micropore flowcell that works based on the RPS technique. Based on our first goal, which was finding an alternate materials and processes that would shorten production times while lowering costs and improving signal quality, the polyimide film was used as a substrate to create precise pores by femtosecond laser, and the resulting current blockades of different sizes of the nanoparticles were recorded. Based on the results, the device can detecting nano-sized particles by changing the current level. The experimental and theoretical investigation, scanning electron microscopy, and focus ion beam were performed to explain the micropore's performance. The second goal was design and fabrication of a leak-free, easy-to-assemble, and portable polymethyl methacrylate flowcell for nanopore experiments. Here, ion current rectification was studied in our nanodevice. We showed a self-assembly-based, controllable, and monitorable in situ Poly(l-lysine)- g-poly(ethylene glycol) coating method under voltage-driven electrolyte flow and electrostatic interaction between nanopore walls and PLL backbones. Using designed nanopore flowcell and in situ monolayer PLL-g-PEG functionalized 20±4 nm SiN nanopores, we observed non-sticky α-1 anti-trypsin protein translocation. additionally, we could show the enhancement of translocation events through this non-sticky nanopore, and also, estimate the volume of the translocated protein. In this study, by comparing the AAT protein translocation results from functionalized and non-functionalized nanopore we demonstrated the 105 times dwell time reduction (31-0.59ms), 25% amplitude enhancement (0.24-0.3 nA), and 15 times event’s number increase (1-15events/s) after functionalization in 1×PBS at physiological pH. Also, the AAT protein volume was measured, close to the calculated AAT protein hydrodynamic volume and previous reports.

Gestione degli ordini di ‘Scheduling Agreement’ e confronto tra soluzioni di magazzino in un’azienda produttrice di macchine automatiche: il caso ACMA S.p.A.

Con la presente tesi di laurea si vuole analizzare la nuova procedura di ordini di “Scheduling Agreement” all’interno della realtà aziendale di ACMA S.p.A., azienda produttrice di macchine automatiche. Con il termine Scheduling Agreement si identifica una gestione di ordini con il fornitore, il quale mantiene i pezzi prodotti all’interno del proprio magazzino per massimo 18 mesi. L’accordo si basa sul principio per cui il fornitore ha una maggiore continuità di fornitura mentre ACMA S.p.A. vede un risparmio degli investimenti aziendali e nel tempo di approvvigionamento. Il principale focus dello studio verterà sulla proposta di soluzioni di stoccaggio per ricercare un punto di ottimo che permetta di ridurre al minimo il rischio di stock out e al tempo stesso minimizzi il livello delle scorte. L’analisi partirà con l’identificazione dei prodotti per cui risulta conveniente aprire uno Scheduling. Tale processo valutativo si estrinseca nell’analisi di due parametri fondamentali: frequenza e consumo. Verranno poi analizzati alcuni casi TO BE con il fine di trovare il Lead Time migliore per ridurre al minimo le giacenze ed evitare rotture di stock. Questi studi utilizzano il software di estrapolazione dati “SAP” per poi analizzarli sulla piattaforma Excel e forniscono una valutazione realistica nella gestione di tale procedura in ACMA S.p.A.. La soluzione conclusiva riesce a risolvere il problema di stock out introducendo la “scorta di sicurezza” calcolata sulla domanda futura. In particolare, utilizzando un Lead Time di approvvigionamento di 21 giorni si è riusciti a ridurre del 75% le scorte a magazzino rispetto al caso più cautelativo, mantenendo comunque basso il rischio di stock out. I risultati ottenuti forniranno un effettivo miglioramento delle prestazioni dell’azienda e il modello verrà sfruttato in futuro per l’applicazione iterativa della soluzione descritta, con risparmio di tempo e di fondi aziendali.

Creazione di un processo di S&OP per una nuova famiglia di prodotti: il caso Sherwin-Williams

Prevedere quanto e quando un cliente richiederà un determinato prodotto è da sempre una delle sfide più complicate che un’azienda deve affrontare. Una delle metodologie più utilizzate è il processo di Sales and Operations, costituito da 5 fasi. L’obiettivo di questo elaborato è illustrare la creazione del processo applicata a una famiglia di prodotti che andrà a sostituire molteplici altri codici prodotti dell’azienda Sherwin-Williams. Per la creazione si è interagito con varie funzioni della multinazionale, tra cui l’ufficio di supply chain, l’ufficio vendite e i vari uffici produzione degli stabilimenti europei. La creazione del processo si articola nelle 5 fasi classiche quindi: raccolta dati sulla domanda futura in cui sono stati individuati i consumi interni e le vendite ai clienti terzi dei prodotti; la creazione del piano di domanda e del piano di produzione iniziale, approvazione produzione delle quantità concordate e definizione delle politiche di gestione sia delle strutture clienti che dello stabilimento produttivo, infine, la fase di miglioramento e monitoraggio del processo. Nell’ultima fase tra le migliorie al processo si ridurrà il numero di codici univoci da gestire del 34%, verrà individuata la zona ottimale per l’ubicazione di un magazzino distributivo e si analizzerà l’aderenza alla schedulazione presso il reparto liquidi dello stabilimento con l’obiettivo di ridurre il Lead Time di produzione.

studio ed ottimizzazione del modello di valutazione del rapporto fra risorse ed obiettivi di consegna in un’azienda leader nel settore del packaging farmaceutico e cosmetico

Il presente elaborato di tesi riguarda uno studio che è stato portato avanti durante il tirocinio curriculare svolto nell’ufficio Engineering di Marchesini Group S.p.A., azienda leader nella produzione di macchine automatiche per il packaging di prodotti farmaceutici e cosmetici. Dopo aver riscontrato alcune criticità nelle modalità con le quali vengono attualmente pianificate e gestite le risorse appartenenti ai team produttivi e con le quali vengono valutati i carichi di lavoro, si sono elaborati dei modelli e degli strumenti che permettono di migliorare ed ottimizzare l’assegnazione delle risorse ai gruppi e di visualizzare in tempo reale la distribuzione dell’impegno di lavoro dei reparti in relazione alla disponibilità in produzione. Le proposte supportano il trend dell’attuale contesto produttivo di garantire un elevato livello di servizio al cliente rispettandone le richieste e i tempi stabiliti. Difatti, un’assegnazione corretta delle risorse in produzione consente di ridurre i ritardi e le inefficienze e, di conseguenza, di migliorare i lead time. In aggiunta, una correlazione chiara e strutturata fra le risorse e gli obiettivi raggiungibili permette di conseguire con maggiore sicurezza i risultati economici stabiliti, evitando di perdere parte del valore potenzialmente collaudabile.

Design and management of a supply chain: a joint location-inventory problem under uncertainty (Part B)

In recent years, global supply chains have increasingly suffered from reliability issues due to various external and difficult to-manage events. The following paper aims to build an integrated approach for the design of a Supply Chain under the risk of disruption and demand fluctuation. The study is divided in two parts: a mathematical optimization model, to identify the optimal design and assignments customer-facility, and a discrete-events simulation of the resulting network. The first one describes a model in which plant location decisions are influenced by variables such as distance to customers, investments needed to open plants and centralization phenomena that help contain the risk of demand variability (Risk Pooling). The entire model has been built with a proactive approach to manage the risk of disruptions assigning to each customer two types of open facilities: one that will serve it under normal conditions and a back-up facility, which comes into operation when the main facility has failed. The study is conducted on a relatively small number of instances due to the computational complexity, a matheuristic approach can be found in part A of the paper to evaluate the problem with a larger set of players. Once the network is built, a discrete events Supply Chain simulation (SCS) has been implemented to analyze the stock flow within the facilities warehouses, the actual impact of disruptions and the role of the back-up facilities which suffer a great stress on their inventory due to a large increase in demand caused by the disruptions. Therefore, simulation follows a reactive approach, in which customers are redistributed among facilities according to the interruptions that may occur in the system and to the assignments deriving from the design model. Lastly, the most important results of the study will be reported, analyzing the role of lead time in a reactive approach for the occurrence of disruptions and comparing the two models in terms of costs.

ottimizzazione del modello di gestione delle scorte dei reparti attrezzeria e sicurezza e definizione dei picking-point degli operatori

Il sistema logistico rappresenta una variabile fondamentale nel contesto organizzativo: se efficiente e ben strutturato può rivelarsi un vantaggio competitivo per le organizzazioni. Nel presente elaborato viene posta l’attenzione proprio su un particolare ambito del sistema logistico, ossia quello della logistica interna. L’obiettivo di questa tesi, svolta a margine di un tirocinio in Marchesini Group, azienda del bolognese leader nella fornitura di sistemi automatici per il packaging farmaceutico e cosmetico, è stato quello di ottimizzare i processi di gestione delle scorte e di picking di due categorie specifiche di prodotti: gli utensili, gestiti dal reparto attrezzeria ed i DPI, gestiti dal reparto sicurezza. Dopo una fase iniziale di osservazione diretta sul campo, finalizzata rilevare le principali criticità dei processi, lo studio si è concentrato sull'identificazione degli articoli principalmente consumati dai reparti e sulla definizione del loro consumo medio. In funzione delle esigenze dei diversi settori coinvolti, sono state, per entrambi i reparti, avanzate delle proposte di soluzione che riguardano sia l'introduzione di un nuovo modello di gestione delle scorte, accompagnato da un nuovo sistema di monitoraggio delle giacenze, che la riorganizzazione del flusso informativo relativo alla gestione degli ordini. Oltre che sul flusso informativo, il focus è stato posto anche sul flusso fisico degli articoli, con l’obiettivo di eliminare gli sprechi legati alle movimentazioni degli operatori tra i reparti. A tale scopo, dopo aver analizzato l'attuale processo di picking, è stata avanzata una proposta di soluzione che prevede l'introduzione di alcuni punti di prelievo direttamente all’interno dei reparti produttivi, appositamente collocati e dimensionati per minimizzare gli spostamenti degli operatori. Nella parte finale dell’elaborato vengono trattate le soluzioni proposte dal punto di vista economico e ne vengono illustrati i possibili sviluppi futuri.

Noise reduction in biomedical speech signal processing based on time and frequency Kalman filtering combined with spectral subtraction

The goal of this paper is to study and propose a new technique for noise reduction used during the reconstruction of speech signals, particularly for biomedical applications. The proposed method is based on Kalman filtering in the time domain combined with spectral subtraction. Comparison with discrete Kalman filter in the frequency domain shows better performance of the proposed technique. The performance is evaluated by using the segmental signal-to-noise ratio and the Itakura-Saito`s distance. Results have shown that Kalman`s filter in time combined with spectral subtraction is more robust and efficient, improving the Itakura-Saito`s distance by up to four times. (C) 2007 Elsevier Ltd. All rights reserved.

Time- and Fluid-Sensitive Resuscitation for Hemodynamic Support of Children in Septic Shock Barriers to the Implementation of the American College of Critical Care Medicine/Pediatric Advanced Life Support Guidelines in a Pediatric Intensive Care Unit in a Developing World

Objectives: To analyze mortality rates of children with severe sepsis and septic shock in relation to time-sensitive fluid resuscitation and treatments received and to define barriers to the implementation of the American College of Critical Care Medicine/Pediatric Advanced Life Support guidelines in a pediatric intensive care unit in a developing country. Methods: Retrospective chart review and prospective analysis of septic shock treatment in a pediatric intensive care unit of a tertiary care teaching hospital. Ninety patients with severe sepsis or septic shock admitted between July 2002 and June 2003 were included in this study. Results: Of the 90 patients, 83% had septic shock and 17% had severe sepsis; 80 patients had preexisting severe chronic diseases. Patients with septic shock who received less than a 20-mL/kg dose of resuscitation fluid in the first hour of treatment had a mortality rate of 73%, whereas patients who received more than a 40-mL/kg dose in the first hour of treatment had a mortality rate of 33% (P < 0.05.) Patients treated less than 30 minutes after diagnosis of severe sepsis and septic shock had a significantly lower mortality rate (40%) than patients treated more than 60 Minutes after diagnosis (P < 0.05). Controlling for the risk of mortality, early fluid resuscitation was associated with a 3-fold reduction in the odds of death (odds ratio, 0.33; 95% confidence interval, 0.13-0.85). The most important barriers to achieve adequate severe sepsis and septic shock treatment were lack of adequate vascular access, lack of recognition of early shock, shortage of health care providers, and nonuse of goals and treatment protocols. Conclusions: The mortality rate was higher for children older than years, for those who received less than 40 mL/kg in the first hour, and for those whose treatment was not initiated in the first 30 Minutes after the diagnosis of septic shock. The acknowledgment of existing barriers to a timely fluid administration and the establishment of objectives to overcome these barriers may lead to a more successful implementation of the American College of Critical Care Medicine guidelines and reduced mortality rates for children with septic shock in the developing world.

Time-lapse and probabilistic inversion strategies for plane-wave electromagnetic data.

L'utilisation efficace des systèmes géothermaux, la séquestration du CO2 pour limiter le changement climatique et la prévention de l'intrusion d'eau salée dans les aquifères costaux ne sont que quelques exemples qui démontrent notre besoin en technologies nouvelles pour suivre l'évolution des processus souterrains à partir de la surface. Un défi majeur est d'assurer la caractérisation et l'optimisation des performances de ces technologies à différentes échelles spatiales et temporelles. Les méthodes électromagnétiques (EM) d'ondes planes sont sensibles à la conductivité électrique du sous-sol et, par conséquent, à la conductivité électrique des fluides saturant la roche, à la présence de fractures connectées, à la température et aux matériaux géologiques. Ces méthodes sont régies par des équations valides sur de larges gammes de fréquences, permettant détudier de manières analogues des processus allant de quelques mètres sous la surface jusqu'à plusieurs kilomètres de profondeur. Néanmoins, ces méthodes sont soumises à une perte de résolution avec la profondeur à cause des propriétés diffusives du champ électromagnétique. Pour cette raison, l'estimation des modèles du sous-sol par ces méthodes doit prendre en compte des informations a priori afin de contraindre les modèles autant que possible et de permettre la quantification des incertitudes de ces modèles de façon appropriée. Dans la présente thèse, je développe des approches permettant la caractérisation statique et dynamique du sous-sol à l'aide d'ondes EM planes. Dans une première partie, je présente une approche déterministe permettant de réaliser des inversions répétées dans le temps (time-lapse) de données d'ondes EM planes en deux dimensions. Cette stratégie est basée sur l'incorporation dans l'algorithme d'informations a priori en fonction des changements du modèle de conductivité électrique attendus. Ceci est réalisé en intégrant une régularisation stochastique et des contraintes flexibles par rapport à la gamme des changements attendus en utilisant les multiplicateurs de Lagrange. J'utilise des normes différentes de la norme l2 pour contraindre la structure du modèle et obtenir des transitions abruptes entre les régions du model qui subissent des changements dans le temps et celles qui n'en subissent pas. Aussi, j'incorpore une stratégie afin d'éliminer les erreurs systématiques de données time-lapse. Ce travail a mis en évidence l'amélioration de la caractérisation des changements temporels par rapport aux approches classiques qui réalisent des inversions indépendantes à chaque pas de temps et comparent les modèles. Dans la seconde partie de cette thèse, j'adopte un formalisme bayésien et je teste la possibilité de quantifier les incertitudes sur les paramètres du modèle dans l'inversion d'ondes EM planes. Pour ce faire, je présente une stratégie d'inversion probabiliste basée sur des pixels à deux dimensions pour des inversions de données d'ondes EM planes et de tomographies de résistivité électrique (ERT) séparées et jointes. Je compare les incertitudes des paramètres du modèle en considérant différents types d'information a priori sur la structure du modèle et différentes fonctions de vraisemblance pour décrire les erreurs sur les données. Les résultats indiquent que la régularisation du modèle est nécessaire lorsqu'on a à faire à un large nombre de paramètres car cela permet d'accélérer la convergence des chaînes et d'obtenir des modèles plus réalistes. Cependent, ces contraintes mènent à des incertitudes d'estimations plus faibles, ce qui implique des distributions a posteriori qui ne contiennent pas le vrai modèledans les régions ou` la méthode présente une sensibilité limitée. Cette situation peut être améliorée en combinant des méthodes d'ondes EM planes avec d'autres méthodes complémentaires telles que l'ERT. De plus, je montre que le poids de régularisation des paramètres et l'écart-type des erreurs sur les données peuvent être retrouvés par une inversion probabiliste. Finalement, j'évalue la possibilité de caractériser une distribution tridimensionnelle d'un panache de traceur salin injecté dans le sous-sol en réalisant une inversion probabiliste time-lapse tridimensionnelle d'ondes EM planes. Etant donné que les inversions probabilistes sont très coûteuses en temps de calcul lorsque l'espace des paramètres présente une grande dimension, je propose une stratégie de réduction du modèle ou` les coefficients de décomposition des moments de Legendre du panache de traceur injecté ainsi que sa position sont estimés. Pour ce faire, un modèle de résistivité de base est nécessaire. Il peut être obtenu avant l'expérience time-lapse. Un test synthétique montre que la méthodologie marche bien quand le modèle de résistivité de base est caractérisé correctement. Cette méthodologie est aussi appliquée à un test de trac¸age par injection d'une solution saline et d'acides réalisé dans un système géothermal en Australie, puis comparée à une inversion time-lapse tridimensionnelle réalisée selon une approche déterministe. L'inversion probabiliste permet de mieux contraindre le panache du traceur salin gr^ace à la grande quantité d'informations a priori incluse dans l'algorithme. Néanmoins, les changements de conductivités nécessaires pour expliquer les changements observés dans les données sont plus grands que ce qu'expliquent notre connaissance actuelle des phénomenès physiques. Ce problème peut être lié à la qualité limitée du modèle de résistivité de base utilisé, indiquant ainsi que des efforts plus grands devront être fournis dans le futur pour obtenir des modèles de base de bonne qualité avant de réaliser des expériences dynamiques. Les études décrites dans cette thèse montrent que les méthodes d'ondes EM planes sont très utiles pour caractériser et suivre les variations temporelles du sous-sol sur de larges échelles. Les présentes approches améliorent l'évaluation des modèles obtenus, autant en termes d'incorporation d'informations a priori, qu'en termes de quantification d'incertitudes a posteriori. De plus, les stratégies développées peuvent être appliquées à d'autres méthodes géophysiques, et offrent une grande flexibilité pour l'incorporation d'informations additionnelles lorsqu'elles sont disponibles. -- The efficient use of geothermal systems, the sequestration of CO2 to mitigate climate change, and the prevention of seawater intrusion in coastal aquifers are only some examples that demonstrate the need for novel technologies to monitor subsurface processes from the surface. A main challenge is to assure optimal performance of such technologies at different temporal and spatial scales. Plane-wave electromagnetic (EM) methods are sensitive to subsurface electrical conductivity and consequently to fluid conductivity, fracture connectivity, temperature, and rock mineralogy. These methods have governing equations that are the same over a large range of frequencies, thus allowing to study in an analogous manner processes on scales ranging from few meters close to the surface down to several hundreds of kilometers depth. Unfortunately, they suffer from a significant resolution loss with depth due to the diffusive nature of the electromagnetic fields. Therefore, estimations of subsurface models that use these methods should incorporate a priori information to better constrain the models, and provide appropriate measures of model uncertainty. During my thesis, I have developed approaches to improve the static and dynamic characterization of the subsurface with plane-wave EM methods. In the first part of this thesis, I present a two-dimensional deterministic approach to perform time-lapse inversion of plane-wave EM data. The strategy is based on the incorporation of prior information into the inversion algorithm regarding the expected temporal changes in electrical conductivity. This is done by incorporating a flexible stochastic regularization and constraints regarding the expected ranges of the changes by using Lagrange multipliers. I use non-l2 norms to penalize the model update in order to obtain sharp transitions between regions that experience temporal changes and regions that do not. I also incorporate a time-lapse differencing strategy to remove systematic errors in the time-lapse inversion. This work presents improvements in the characterization of temporal changes with respect to the classical approach of performing separate inversions and computing differences between the models. In the second part of this thesis, I adopt a Bayesian framework and use Markov chain Monte Carlo (MCMC) simulations to quantify model parameter uncertainty in plane-wave EM inversion. For this purpose, I present a two-dimensional pixel-based probabilistic inversion strategy for separate and joint inversions of plane-wave EM and electrical resistivity tomography (ERT) data. I compare the uncertainties of the model parameters when considering different types of prior information on the model structure and different likelihood functions to describe the data errors. The results indicate that model regularization is necessary when dealing with a large number of model parameters because it helps to accelerate the convergence of the chains and leads to more realistic models. These constraints also lead to smaller uncertainty estimates, which imply posterior distributions that do not include the true underlying model in regions where the method has limited sensitivity. This situation can be improved by combining planewave EM methods with complimentary geophysical methods such as ERT. In addition, I show that an appropriate regularization weight and the standard deviation of the data errors can be retrieved by the MCMC inversion. Finally, I evaluate the possibility of characterizing the three-dimensional distribution of an injected water plume by performing three-dimensional time-lapse MCMC inversion of planewave EM data. Since MCMC inversion involves a significant computational burden in high parameter dimensions, I propose a model reduction strategy where the coefficients of a Legendre moment decomposition of the injected water plume and its location are estimated. For this purpose, a base resistivity model is needed which is obtained prior to the time-lapse experiment. A synthetic test shows that the methodology works well when the base resistivity model is correctly characterized. The methodology is also applied to an injection experiment performed in a geothermal system in Australia, and compared to a three-dimensional time-lapse inversion performed within a deterministic framework. The MCMC inversion better constrains the water plumes due to the larger amount of prior information that is included in the algorithm. The conductivity changes needed to explain the time-lapse data are much larger than what is physically possible based on present day understandings. This issue may be related to the base resistivity model used, therefore indicating that more efforts should be given to obtain high-quality base models prior to dynamic experiments. The studies described herein give clear evidence that plane-wave EM methods are useful to characterize and monitor the subsurface at a wide range of scales. The presented approaches contribute to an improved appraisal of the obtained models, both in terms of the incorporation of prior information in the algorithms and the posterior uncertainty quantification. In addition, the developed strategies can be applied to other geophysical methods, and offer great flexibility to incorporate additional information when available.