Rheology of bituminous mastics and mortars containing crumb rubber from tyres: a novel dry-hybrid technology

This report studied the effect of crumb rubber in the asphalt mixture. The mixtures were also having limestone filler as a modifier. Mastic and mortar (mastic-fine aggregate system) mixture having different quantities of crumb rubber and limestone filler modifiers have been tested in order to find the best rutting resistance combination with an acceptable stiffness. The rheological tests on bituminous mastics and mortars have done in the laboratories in Nottingham Transport Engineering Centre (NTEC) and University of Bologna (DICAM). In the second chapter, an extensive literature review about the binders, additives, asphalt mixtures, various modelling and testing methods have been reviewed. In the third chapter, the physical and rheological properties of the binders have been investigated using both traditional devices and DSRs. The forth chapter is dedicated to finding the behaviour of the modified mastics (Binder-modifier system) with different combinations. Five different combinations of crumb rubber and limestone filler mastic tested with various methods using Dynamic Shear Rheometers. In the fifth chapter, in order to find the effect of the modifiers in the rheological properties of the complete asphalt mixture, the fine aggregates added to the same mastic combinations. In this phase, the behaviour of the system so-called mortar; binder, rubber, filler and fine aggregates) has been studied using the DSR device and the traditional tests. The results show that using fine crumb rubber reduces the thermo sensibility of the mastic (Binder Bitumen System) and improves its elasticity. Limestone filler in the other hand increases the mixture stiffness at high Frequencies. Another important outcome of this research was that the rheological properties of the mortars were following the same trend of the mastics, therefore study the rheological properties of the mastic gives an upright estimation of the mortar.

Investigating the role of glutathione and glutathione biosynthetic genes in the adaptation of Anopheles gambiae to insecticides

Malaria remains a serious public health challenge in the tropical world, with 584,000 deaths globally in 2013, of which 90% occurred in Africa, and mostly in pregnant women and children under the age of five. Anopheles gambiae (An. gambiae) is the principal malaria vector in Africa, where vector control measures involve the use of insecticides in the forms of long-lasting insecticide-treated nets (LLINs) and indoor residual spraying (IRS). The development of insecticides resistance mitigates these approaches. Glutathione (GSH) is widely distributed among all living organisms, and is associated with detoxification pathways, especially the Glutathione S-transferases (GSTs). Its direct involvement and relevance in insecticide resistance in An. gambiae has not been determined. Thus, this work examines the contribution of GSH, its biosynthetic genes (GCLM, GCLC) and their possible transcriptional regulator Nrf2 in insecticide resistance in An. gambiae sampled from agricultural setting (areas of intensive agriculture) and residential setting (domestic area). Bioinformatics analysis, W.H.O. adult susceptibility bioassays and molecular techniques were employed to investigate. Total RNA was first isolated from the adults An. gambiae mosquitoes raised from agricultural and residential field-caught larvae which had been either challenged or unchallenged with insecticides. Semi-quantitative RT-PCR using gel image densitometry was used to determine the expression levels of GCLM, GCLC genes and Nrf2. Bioinformatics’ results established the presence of putative AGAP010259 (AhR) and AGAP005300 (Nf2e1) transcription factor binding sites in An. gambiae GCLC and GCLM promoters in silico. An. gambiae s.l. studied here were highly resistant to DDT and permethrin but less resistant to bendiocarb. Both knockdown resistance (kdr) mutation variants L1014S and L1014F that confers resistance to pyrethroid insecticides were identified in both An. coluzzii and An. arabiensis sampled from northern Nigeria. The L1014F was much associated with An. coluzzii. A significant positive correlation (P=0.04) between the frequency of the L1014F point mutation and resistance to DDT and permethrin was observed. However, a weak or non-significant correlation (P=0.772) between the frequency of the L1014S point mutation and resistance was also found. L1014S and L1014F mutations co-occurred in both agricultural and residential settings with high frequencies. However, the frequencies of the two mutations were greater in the agricultural settings than in the residential settings. The levels of total, reduced and oxidized GSH were significantly higher in mosquitoes from agricultural sites than those from residential sites. Increased oxidized GSH levels appears to correlate with higher DDT resistance. The expression levels of GCLM, GCLC and Nrf2 were also significantly up-regulated in adults An. gambiae raised from agricultural and residential field-caught larvae when challenged with insecticide. However, there was higher constitutive expression of GCLM, GCLC and Nrf2 in mosquitoes from agricultural setting. The increased expression levels of these genes and also GSH levels in this population suggest their roles in the response and adaptation of An. gambiae to insecticide challenges. There exists the feasibility of using GSH status in An. gambiae to monitor adaptation and resistance to insecticides.

The ecology and evolution of invasive Potamopyrgus antipodarum in Australia

The spread of invasive organisms is one of the greatest threats to ecosystems and biodiversity worldwide. Understanding the evolutionary and ecological factors responsible for the transport, introduction, establishment and spread of invasive species will assist the development of control strategies. The New Zealand mudsnail, Potamopyrgus antipodarum (Gray 1843) (Gastropoda: Hydrobiidae), is a global freshwater invader, with populations established in Europe, Asia, the Americas and Australia. While sexual and asexual P. antipodarum coexist in the native range, invasive populations reproduce by parthenogenesis, producing dense populations that compete for resources with native species. Potamopyrgus antipodarum is a natural model system for the study of evolutionary and ecological processes underlying invasion. This thesis assesses the invasion history, genetic diversity and ecology of P. antipodarum in Australia, with particular focus on: a) potential source populations, b) distribution and structure of populations, and c) species traits related to the establishment, persistence and spread of invasive P. antipodarum. Genetic analyses were carried out on specimens collected for this study from New Zealand and Australia, along with existing museum samples. In combination with published data, the analyses revealed low genetic diversity among and within invasive populations in south-eastern Australia, relative to New Zealand populations. Phylogenetic relationships inferred from mitochondrial sequences indicated that the Australian populations belong to clades dominated by parthenogenetic haplotypes that are known to be present in Europe and the US. These ‘invasive clades’ are likely to originate from the North Island of New Zealand, and suggest a role for selection in determining genetic composition of invasive populations. The genotypic diversity of Australian P. antipodarum was low, with few, closely related clones distributed across south-eastern Australia. The pattern of clone distribution was not consistent with any assessed geographical or abiotic factors; instead a few, widely-distributed clones were present in high frequencies at most sites. Differences in clone frequencies were found, which may indicate differential success of clonal lineages. A range of traits have been proposed as facilitators of invasion success, and within-species variation in these traits can promote differential success of genotypes. Using laboratory-based experiments, the performance of the three most common Australian clones was tested across a suite of invasion-relevant traits. Ecologically-relevant variation in traits was found among the clones. These differences may have determined the spatial distribution of clones, and may continue to do so into the future. This thesis found that the P. antipodarum invasion of Australia is the result of few introductions of a small number of globally-invasive genotypes that vary in ecologically-relevant traits. From a source of considerable genetic diversity in the native range, very few genotypes have become invasive. Those that are invasive appear to be very successful at continental scales. These findings highlight a capacity in asexual invaders to successfully invade, and potentially adapt to, a broad range of ecosystems. The P. antipodarum invasion system is amenable to research using combinations of field-based studies, molecular and laboratory approaches, and is likely to yield significant, broadly-applicable insights into invasion.

Avaliação dos parâmetros de insensibilização e os impactos na qualidade da carne de perus (Meleagris gallopavo)

Brazil is the third largest producer and exporter of turkey meat, especially in Paraná state, with the largest production volume. In worldwide the animal welfare is a prerequisite for food quality of animal origin, especially in Europe. The Regulation of European Community No 1099/2009 provides requirements for poultry stunning that associate with animal welfare as a means to minimize the pain and suffering from the slaughter. Improper application of callousness should produce low-quality meat, and significant industry losses. This Research aimed to evaluate the impacts on the quality of meat from turkeys, applying electrical stunning parameters established in the Regulation No 1099/2009 of the Council of 24 September 2009. Was applied an outline with 8 tests set equidistantly to frequency, and set parameters for current and voltage, and a control test. Were conducted qualitative assessments of hematoms and bruises / fractures in carcasses, hematoms, blood splashed and bleeding in turkey breast, and quantitative pH, color (L *), water holding capacity and shear force in turkey breast. The individual assessments showed no significant difference (p>0,05). In multivariate cluster analysis was the formation of two distinct groups: group 1 - 50 Hz to 200 Hz (low frequency) and group 2 - 633 Hz to 1500 Hz (high frequency), which showed significant difference (p= 0,016). In principal component analysis multivariate, the group 1 tend to have a higher incidence of bruising, blood splashed, bleeding and water holding capacity in breast turkeys, and bruises / fractures and hematoms on carcasses. The Group 2 tends to have a lower incidence of these parameters, and higher pH values, shear force and color (L *). Positive correlation was obtained for the parameters pH and shear force (r= 0.7506, p=0.0198); bleeding and splashed blood (r= 0.8811, p= 0.0017), and negative correlation to color (L*) and splashed blood on breast (r= -0.7889; p= 0.0115); breast hematoms and shear force (r= -0.7844; p= 0.0123). It has been observed that at lower frequencies stunning tends to have higher incidence of defects in the carcasses and turkey breast. The use of high frequencies in stunning, create smaller quantity of trimming, and an increase in turkey breast volume produced, with a financial gain of approximately R$250,000.00 / year. Moreover, there is no need increase the workers to do the trimming tasks and, therefore, higher financial results for companies. Therefore, we recommend the use of high frequencies in the stunning of turkeys.

Wave and turbulence measurements at a tidal energy site

This work presents the analysis of wave and turbulence measurements collected at a tidal energy site. A new method is introduced to produce more consistent and rigorous estimations of the velocity fluctuations power spectral densities. An analytical function is further proposed to fit the observed spectra and could be input to the numerical models predicting power production and structural loading on tidal turbines. Another new approach is developed to correct for the effect of the Doppler noise on the high frequencies power spectral densities. The analysis of velocity time series combining wave and turbulent contributions demonstrates that the turbulent motions are coherent throughout the water column, rendering the wave coherence-based methods not applicable to our dataset. To avoid this problem, an alternative approach relying on the pressure data collected by the ADCP is introduced and shows appreciable improvement in the wave-turbulence separation.

Resultados de cirurgia estapédica: a experiência recente do Hospital Professor Doutor Fernando Fonseca

Objectivo: analisar a experiência recente em cirurgia estapédica do Hospital Professor Doutor Fernando Fonseca, recorrendo à avaliação dos seus resultados audiométricos. Materiais e métodos: avaliação retrospectiva de processos clínicos referentes a 155 cirurgias estapédicas consecutivas realizadas no Hospital Professor Doutor Fernando Fonseca, entre Janeiro de 2006 e Dezembro de 2010. Resultados: a média de idades foi de 43,6 anos. A média de 4 frequências (0.5, 1, 2 e 4 kHz) do gap aero-ósseo pós- operatório foi de 5,2 dB. O ganho auditivo médio registado foi de 27 dB sendo a taxa de sucesso cirúrgico de 88,2%. A alteração da condução óssea nas altas frequências foi de 4,9 dB. Conclusões: A cirurgia estapédica apresenta uma elevada taxa de sucesso e baixa frequência de complicações, sendo uma opção preferencial no tratamento da otosclerose. Os resultados deste trabalho confirmam-no reforçando o recurso à cirurgia estapédica no Hospital Professor Doutor Fernando Fonseca.

Experimental and analytical methodologies for predicting peak loads on building envelopes and roofing systems

The performance of building envelopes and roofing systems significantly depends on accurate knowledge of wind loads and the response of envelope components under realistic wind conditions. Wind tunnel testing is a well-established practice to determine wind loads on structures. For small structures much larger model scales are needed than for large structures, to maintain modeling accuracy and minimize Reynolds number effects. In these circumstances the ability to obtain a large enough turbulence integral scale is usually compromised by the limited dimensions of the wind tunnel meaning that it is not possible to simulate the low frequency end of the turbulence spectrum. Such flows are called flows with Partial Turbulence Simulation.^ In this dissertation, the test procedure and scaling requirements for tests in partial turbulence simulation are discussed. A theoretical method is proposed for including the effects of low-frequency turbulences in the post-test analysis. In this theory the turbulence spectrum is divided into two distinct statistical processes, one at high frequencies which can be simulated in the wind tunnel, and one at low frequencies which can be treated in a quasi-steady manner. The joint probability of load resulting from the two processes is derived from which full-scale equivalent peak pressure coefficients can be obtained. The efficacy of the method is proved by comparing predicted data derived from tests on large-scale models of the Silsoe Cube and Texas-Tech University buildings in Wall of Wind facility at Florida International University with the available full-scale data.^ For multi-layer building envelopes such as rain-screen walls, roof pavers, and vented energy efficient walls not only peak wind loads but also their spatial gradients are important. Wind permeable roof claddings like roof pavers are not well dealt with in many existing building codes and standards. Large-scale experiments were carried out to investigate the wind loading on concrete pavers including wind blow-off tests and pressure measurements. Simplified guidelines were developed for design of loose-laid roof pavers against wind uplift. The guidelines are formatted so that use can be made of the existing information in codes and standards such as ASCE 7-10 on pressure coefficients on components and cladding.^

Design and characterization of wideband Hall current sensors in BCD technology for smart power and metering applications

Power electronic circuits are moving towards higher switching frequencies, exploiting the capabilities of novel devices to shrink the dimension of passive components. This trend demands sensors capable enough to operate at such high frequencies. This thesis aims to demonstrate through experimental characterization, the broadband capability of a fully integrated CMOS X-Hall current sensor in current mode interfaced with a transimpedance amplifier (TIA), chip CH09, realized in CMOS technology for power electronics applications such as power converters. The system exploits a common-mode control system to operate the dual supply system, 5-V for the X-Hall probe and 1.2-V for the readout. The developed prototype achieves a maximum acquisition bandwidth of 12 MHz, a power consumption of 11.46 mW, resolution of 39 mArms, a sensitivity of 8 % /T, and a FoM of 569-MHz/A2mW, significantly higher than current state-of-the-art. Further enhancements were proposed to CH09 as a new chip CH100, aiming for accuracy levels prerequisite for a real-time power electronic application. The TIA was optimized for a wider bandwidth of 26.7 MHz with nearly 30% reduction of the integrated input referred noise of 26.69 nArms at the probe-AFE interface in the frequency band of DC-30 MHz, and a 10% improvement in the dynamic range. The expected input range is 5-A. The chip incorporates a dual sensing chain for differential sensing to overcome common mode interferences. A novel offset cancellation technique is proposed that would require switching of polarity of bias currents. Thermal gain drift was improved by a factor of 8 and will be digitally calibrated utilizing a new built-in temperature sensor with a post calibration measurement accuracy greater than 1%. The estimated power consumption of the entire system is 55.6 mW. Both prototypes have been implemented through a 90-nm microelectronic process from STMicroelectronics and occupy a silicon area of 2.4 mm2.

Characterization of ENSO changes under idealised radiative forcing in an intermediate complexity general circulation model

Intermediate-complexity general circulation models are a fundamental tool to investigate the role of internal and external variability within the general circulation of the atmosphere and ocean. The model used in this thesis is an intermediate complexity atmospheric general circulation model (SPEEDY) coupled to a state-of-the-art modelling framework for the ocean (NEMO). We assess to which extent the model allows a realistic simulation of the most prominent natural mode of variability at interannual time scales: El-Niño Southern Oscillation (ENSO). To a good approximation, the model represents the ENSO-induced Sea Surface Temperature (SST) pattern in the equatorial Pacific, despite a cold tongue-like bias. The model underestimates (overestimates) the typical ENSO spatial variability during the winter (summer) seasons. The mid-latitude response to ENSO reveals that the typical poleward stationary Rossby wave train is reasonably well represented. The spectral decomposition of ENSO features a spectrum that lacks periodicity at high frequencies and is overly periodic at interannual timescales. We then implemented an idealised transient mean state change in the SPEEDY model. A warmer climate is simulated by an alteration of the parametrized radiative fluxes that corresponds to doubled carbon dioxide absorptivity. Results indicate that the globally averaged surface air temperature increases of 0.76 K. Regionally, the induced signal on the SST field features a significant warming over the central-western Pacific and an El-Niño-like warming in the subtropics. In general, the model features a weakening of the tropical Walker circulation and a poleward expansion of the local Hadley cell. This response is also detected in a poleward rearrangement of the tropical convective rainfall pattern. The model setting that has been here implemented provides a valid theoretical support for future studies on climate sensitivity and forced modes of variability under mean state changes.

Theoretical study of the structural dependence of nuclear quadrupole frequencies in high-T_c superconductors

The remarkable difference between the nuclear quadrupole frequencies v_Q of Cu(1) and Cu(2) in YBa_2Cu_3O_6 and YBa_2Cu_3O_7 is analyzed. We calculate the ionic contribution to the electric field gradients and estimate, by using experimental results for Cu_2O and La_2CuO_4, the contribution of the d valence electrons. Thus, we determine v_Q1, v_Q2, and the asymmetry parameter η for YBa_2Cu_3O_6 and YBa_2Cu_3O_7. The number of holes in dthe Cu-O planes and chains is found to be important for the different behavior of v_Q1 and v_Q2.

High frequency of sex and equal frequencies of mating types in natural populations of the ciliate Tetrahymena thermophila.

In ciliate protists, sex involves the temporary joining of two cells of compatible mating type, followed by meiosis and exchange of gametic nuclei between conjugants. Reproduction is by asexual binary fission following conjugation. For the many ciliates with fixed multiple mating types, frequency-dependent sex-ratio theory predicts equal frequencies of mating types, if sex is common in nature. Here, we report that in natural populations of Tetrahymena thermophila sexually immature cells, indicative of recent conjugation, are found from spring through fall. In addition, the seven mating types occur in approximately equal frequencies, and these frequencies appear to be maintained by interaction between complex, multiple mat alleles and environmental conditions during conjugation. Such genotype-environment interaction determining mating type frequency is rare among ciliates.

Methylenetetrahydrofolate reductase (MTHFR) C677T polymorphism and high plasma homocysteine in chronic hepatitis C (CHC) infected patients from the Northeast of Brazil

Background/Aim: Hyperhomocysteinemia due to Methylenetetrahydrofolate Reductase (MTHFR) gene, in particular the C677T (Ala222Val) polymorphism were recently associated to steatosis and fibrosis. We analyzed the frequency of MTHFR gene in a cross-sectional study of patients affected by Chronic Hepatitis C (CHC) from Northeast of Brazil. Method: One hundred seven-four untreated patients with CHC were genotyped for the C677T MTHFR. Genomic DNA was extracted from peripheral blood cells and the C677T MTHFR polymorphism was identified by PCR-RFLP. The homocysteine (Hcy) levels were determined by chemiluminescence method. All patients were negative for markers of Wilson's disease, hemochromatosis and autoimmune diseases and have current and past daily alcohol intake less than 100 g/week. Results: Among subjects infected with CHC genotype non-1 the frequency of MTHFR genotypes TT was 9.8% versus 4.4% genotype 1 (p = 0.01). Nevertheless, association was found between the MTHFR genotype TT x CT/CC polymorphism and the degree of steatosis and fibrosis in both hepatitis C genotype (p < 0.05). A significant difference was found on plasma Hcy levels in patients with steatosis regardless of HCV genotype (p = 0.03). Conclusion: Our results indicate that plasma Hcy levels is highly prevalent in subjects with chronic hepatits C with steatosis regardless of HCV genotype and vitamin deficiency. The presence of genotype TT of MTHFR C677T polymorphism was more common in CHC genotype non-1 infected patient regardless of histopathological classification and genotype TT+CT frequencies were significant in the presence of fibrosis grade 1+2 and of steatosis in CHC infected patients from the northeast of Brazil regardless of HCV genotype. The genetic susceptibility of MTHFR C677T polymorphism should be confirmed in a large population.

High-order fractional microwave-induced resistance oscillations in two-dimensional systems

We report on the observation of microwave-induced resistance oscillations associated with the fractional ratio n/m of the microwave irradiation frequency to the cyclotron frequency for m up to 8 in a two-dimensional electron system with high electron density. The features are quenched at high microwave frequencies independent of the fractional order m. We analyze temperature, power, and frequency dependencies of the magnetoresistance oscillations and discuss them in connection with existing theories.

Surface foam film waves studied with high-speed linescan camera

Dynamic foam films have been investigated using an improved experimental set-up with a CCD high-speed linescan camera in conjunction with the Scheludko micro-interferometric cell for studying the drainage and rupture of liquid foam films. The improved experimental set-up increased the sensibility of detection of the local thickness heterogeneities and domains during the film evolution. The evolution of the foam films up to the formation of black spots was recorded in the time intervals of 50ms. The wavelengths of the propagating surface waves and their frequencies were determined experimentally. The experimental results show that the current quasi-static hydrodynamic theory does not properly describe the wave dynamics with inter-domain channels. However, the thermodynamic condition for formation of black spots in the foam films was met by the experimental results. (c) 2005 Elsevier B.V. All rights reserved.