Investigation of heavy metals in sediments and Manila clams Ruditapes philippinarum from Jiaozhou Bay, China

Manila clams (Ruditapes philippinarum) and sediments were collected bimonthly during 2007 at five locations in Jiaozhou Bay near Qingdao, China, to determine heavy metal concentrations and to assess the validation of R. philippinarum as a metal biomonitor. Concentrations of heavy metals in clam soft tissues ranged between 0.75 and 3.31, 0.89 and 15.20, 5.70 and 26.03, 52.12 and 110.33, 10.30 and 72.34, 9.64 and 28.60, and 3.15 and 52.75 mu g g (-aEuro parts per thousand 1) dry weight for Cd, Pb, Cu, Zn, Mn, Cr, and Ni, respectively. Most of the highest values occurred at the northeast bay and the lowest values occurred at the western part. Regarding seasonal variation, relatively high tissue metal concentrations were observed during October or December. A similar pattern was also found in habitat sediments. There was a strong correlation between the concentrations of Cd, Pb, Zn, Mn, Cr, and Ni in soft tissues and surrounding sediments. It is indicated that R. philippinarum could be used as a biomonitor for heavy metal contamination in Jiaozhou Bay.

Assessment of metal contamination in surface sediments of Jiaozhou Bay, Qingdao, China

An assessment of metal contamination in surface sediments of the Jiaozhou Bay, Qingdao, one of the rapidly developing coastal economic zones in China, is provided. Sediments were collected from 10 stations and a total of 15 heavy metals were analyzed. Concentrations of metals show significant variability and range from 210 to 620 ppm for Ti, 2.7 to 23 ppm for Ni, 4.2 to 28 ppm for Cu, 5.2 to 18 ppm for Pb, 12 to 58 ppm for Zn, 0.03 to 0.11 ppm for Cd, 5 to 51 ppm for Cr, 1.5 to 9.9 ppm for Co, 5.3 to 19 ppm for As, 12 to 32 ppm for Se, and 19 to 97 ppm for Sr. Based on concentration relationships and enrichment factor (EF) analyses, the results indicate that sediment grain size and organic matter played important roles in controlling the distribution of the heavy metals in surface sediments of the Jiaozhou Bay. The study shows that the sediment of the Jiaozhou Bay has been contaminated by heavy metals to various degrees, with prominent arsenic contributing the most to the contamination. The analysis suggests that the major sources of metal contamination in the Jiaozhou Bay are land-based anthropogenic ones, such as discharge of industrial waste water and municipal sewage and run-off. Notably, the elevated heavy metal concentrations of the Jiaozhou Bay sediments could have a significant impact on the bay's ecosystem. With the rapid economic development and urbanization around the Jiaozhou Bay, coastal management and pollution control should focus on these contaminant sources, as well as provide ongoing monitoring studies of heavy metal contamination within the bay.

Metabolic studies on the nitrophile yeast Rhodotorula glutinis DSBCA06

Nitrogen is the most abundant element in atmosphere and fundamental component of proteins, nucleic acids and other essential molecules. In the past century the industrial use of nitrogen compounds has grown exponentially causing widespread pollution. Nitrogen pollution has wide-ranging impacts including contributions to global warming, acid rains and eutrophication. Reduction of nitrogen use in industry and agriculture coupled whit remediation treatments could represent a solution. To this purpose we isolated from environmental samples a nitrophile strain capable of removing nitrogen compounds efficiently from the medium. Through the molecular characterization, we identified the strain as a Rhodotorula glutinis that we called DSBCA06. We examined the main metabolic features of the strain, also to determine the best growing conditions. At the same time, the ability of the strain to grow in presence of high nitrite concentrations was assayed, being a relevant feature poorly studied earlierfor other environmental yeasts. The ability of the strain to grow in presence of heavy metal cations was also tested, showing a noticeable tolerance. The cost of bioremediation treatments is often a problem. One of the way to obviate this is to produce valuable secondary metabolites, capable of positively impact the cost of the processes. In this context the ability of the strain to produce carotenoids, natural molecules with antioxidant properties used for food production, cosmetic and pharmaceutical industry, has been evaluated. The strain Rhodotorula glutinis DSBCA06 showed interesting features suggesting its possible use in bioremediation or industrials process for production of secondary metabolites such as lipids and carotenoids.

Precipitation of heavy metals from wastewater using simulated flue gas: sequent additions of fly ash, lime and carbon dioxide

Lime is a preferred precipitant for the removal of heavy metals from industrial wastewater due to its relatively low cost. To reduce heavy metal concentration to an acceptable level for discharge, in this work, fly ash was added as a seed material to enhance lime precipitation and the suspension was exposed to CO2 gas. The fly ash-lime-carbonation treatment increased the particle size of the precipitate and significantly improved sedimentation of sludge and the efficiency of heavy metal removal. The residual concentrations of chromium, copper, lead and zinc in effluents can be reduced to (mg L-1) 0.08, 0.14, 0.03 and 0.45, respectively. Examination of the precipitates by XRD and thermal analysis techniques showed that calcium-heavy metal double hydroxides and carbonates were present. The precipitate agglomerated and hardened naturally, facilitating disposal without the need for additional solidification/stabilization measures prior to landfill. It is suggested that fly ash, lime and CO2, captured directly from flue gas, may have potential as a method for wastewater treatment. This method could allow the ex-situ sequestration of CO2, particularly where flue-gas derived CO2 is available near wastewater treatment facilities. (C) 2009 Elsevier Ltd. All rights reserved.

Characterisation of products of tricalcium silicate hydration in the presence of heavy metals

The hydration of tricalcium silicate (C(3)S) in the presence of heavy metal is very important to cement-based solidification/stabilisation (s/s) of waste. In this work, tricalcium silicate pastes and aqueous suspensions doped with nitrate salts of Zn(2+), Pb(2+), Cu(2+) and Cr(3+) were examined at different ages by X-ray powder diffraction (XRD), thermal analysis (DTA/TG) and (29)Si solid-state magic angle spinning/nuclear magnetic resonance (MAS/NMR). It was found that heavy metal doping accelerated C(3)S hydration, even though Zn(2+) doping exhibited a severe retardation effect at an early period of time of C(3)S hydration. Heavy metals retarded the precipitation of portlandite due to the reduction of pH resulted from the hydrolysis of heavy metal ions during C(3)S hydration. The contents of portlandite in the control, Cr(3+)-doped, Cu(2+)-doped, Pb(2+)-doped and Zn(2+)-doped C(3)S pastes aged 28 days were 16.7, 5.5, 5.5, 5.5, and <0.7%, respectively. Heavy metals co-precipitated with calcium as double hydroxides such as (Ca(2)Cr(OH)(7).3H(2)O, Ca(2)(OH)(4)4Cu(OH)(2).2H(2)O and CaZn(2)(OH)(6).2H(2)O). These compounds were identified as crystalline phases in heavy metal doping C(3)S suspensions and amorphous phases in heavy metal doping C(3)S pastes. (29)Si NMR data confirmed that heavy metals promoted the polymerisation of C-S-H gel in 1-year-old of C(3)S pastes. The average numbers of Si in C-S-H gel for the Zn(2+)-doped, Cu(2+)-doped, Cr(3+)-doped, control, and Pb(2+)-doped C(3)S pastes were 5.86, 5.11, 3.66, 3.62, and 3.52. And the corresponding Ca/Si ratios were 1.36, 1.41, 1.56, 1.57 and 1.56, respectively. This study also revealed that the presence of heavy metal facilitated the formation of calcium carbonate during C(3)S hydration process in the presence of carbon dioxide.

Single-Element and Competitive Metal Mobility Measured with Column Infiltration and Batch Tests

The distribution coefficient, K-d, is often used to quantify heavy metal mobility in soils. Batch sorption or column infiltration tests may be used to measure K-d. The latter are closer to natural soil conditions, but are difficult to conduct in clays. This difficulty can be overcome by using a laboratory centrifuge. An acceleration of 2600 gravities was applied to columns of London Clay, an Eocene clay sub-stratum, and Cu, Ni, and Zn mobility was measured in centrifuge infiltration tests, both as single elements and in dual competition. Single-element K-d values were also obtained from batch sorption tests, and the results from the two techniques were compared. It was found that K-d values obtained by batch tests vary considerably depending on the metal concentration, while infiltration tests provided a single K-d value for each metal. This was typically in the lower end of the range of the batch test K-d values. For both tests, the order of mobility was Ni > Zn > Cu. Metals became more mobile in competition than when in single-element systems: Ni K-d decreased 3.3 times and Zn K-d 3.4 times when they competed with Cu, while Cu decreased only 1.2 times when in competition with either Ni or Zn. Our study showed that competitive sorption between metals increases the mobility of those metals less strongly bound more than it increases the mobility of more strongly bound metals.

Adsorption of metal cations by hydrous aluminium(III) or iron(III) hydroxide precipitates: enhancement by EDTA and related chelate molecules

Stoichiometrically equivalent concentrations of ethylenediaminetetraacetate, EDTA, and of related chelating anions increase the adsorption of ca. millimolar concentrations heavy metal aqua-ions on amorphous precipitates of aluminium(III) or iron(III) hydroxide and, although higher concentrations decrease the adsorption, poly-EDTA, a polyelectrolyte containing EDTA functional groups, shows no such decrease.

A multi-capability sensor for hydrocarbons, synthetic-based fluids and heavy metals:Applications for environmental monitoring during removal of drill cuttings piles

As part of any drilling cuttings pile removal process the requirement for monitoring the release of contaminants into the marine environment will be critical. Traditional methods for such monitoring involve taking samples for laboratory analysis. This process is time consuming and only provides data on spot samples taken from a limited number of locations and time frames. Such processes, therefore, offer very restricted information. The need for improved marine sensors for monitoring contaminants is established. We report here the development and application of a multi-capability optical sensor for the real-time in situ monitoring of three key marine environmental and offshore/oil parameters: hydrocarbons, synthetic-based fluids and heavy metal concentrations. The use of these sensors will be a useful tool for real-time in situ environmental monitoring during the process of decommissioning offshore structures. Multi-capability array sensors could also provide information on the dispersion of contamination from drill cuttings piles either while they are in situ or during their removal.

Toxic interactions of metal ions (Cd2+, Pb2+, Zn2+ and Sb3- on in vitro biomass production of ectomycorrhizal fungi

A number of ectomycorrhizal (ECM) fungi, from sites uncontaminated by toxic metals, were investigated to determine their sensitivity to Cd^2-, Pb²⁺, Zn²⁺ and Sb^3-, measured as an inhibition of fungal biomass production. Isolates were grown in liquid media amended with the metals, individually (over a range of concentrations) and in combination (at single concentrations) to determine any significant interactions between the metals. Significant interspecific variation in sensitivity to Cd²⁺ and Zn²⁺ was recorded, while Pb²⁺ and Sb^3- individually had little effect. The presence of Pb²⁺ and Sb^3- in the media did however, ameliorate Cd²⁺ and Zn²⁺ toxicity in some circumstances. Interactions between Cd²⁺ and Zn²⁺ were investigated further over a range of concentrations. Zn²⁺ was found to significantly ameliorate the toxicity of Cd²⁺ to three of the four isolates tested. The influence of Zn²⁺ varied between ECM species and with the concentrations of metals tested.

Do ectomycorrhizal fungi exhibit adaptive tolerance to potentially toxic metals in the environment?

The effects of potentially toxic metals on ectomycorrhizal (ECM) fungi and their higher plant hosts are examined in this review. Investigations at a species and community level have revealed wide inter- and intraspecific variation in sensitivity to metals. Adaptive and constitutive mechanisms of ECM tolerance are proposed and discussed in relation to proven tolerance mechanisms in bacteria, yeasts and plants. Problems with methodology and research priorities are highlighted. These include the need for a detailed understanding of the genetic basis of tolerance in the ECM symbiosis, and for studies of ECM community dynamics in polluted sites.

Biomass allocation, phosphorus nutrition and vesicular-arbuscular mycorrhizal infection in clones of Yorkshire Fog, Holcus lanatus L. (Poaceae) that differ in their phosphate uptake kinetics and tolerance to arsenate

Biomass and phosphorus allocation were determined in arsenate tolerant and non-tolerant clones of the grass Holcus lanatus L. in both solution culture and in soil. Arsenate is a phosphate analogue and is taken up by the phosphate uptake system. Tolerance to arsenate in this grass is achieved by suppression of arsenate (and phosphate) influx. When clones differing in their arsenate tolerance were grown in solution culture with a range of phosphate levels, a tolerant clone did not fare as well as a non-tolerant at low levels of phosphate nutrition in that it had reduced shoot biomass production, increased biomass allocation to the roots and lower shoot phosphorus concentration. At a higher level of phosphate nutrition there was little or no difference in these parameters, suggesting that differences at lower levels of phosphate nutrition were due solely to differences in the rates of phosphate accumulation. In experiments in sterile soil (potting compost) the situation was more complicated with tolerant plants having lower growth rates but higher phosphorus concentrations. The gene for arsenate tolerance is polymorphic in arsenate uncontaminated populations. When phosphorus concentration of tolerant phenotypes was determined in one such population, again tolerants had a higher phosphorus status than non-tolerants. Tolerants also had higher rates of vesicular-arbuscular mycorrhizal (VAM) infection. The ecological implications of these results are that it appears that suppression of the high affinity uptake system, is at least in part, compensated by increased mycorrhizal infection. © 1994 Kluwer Academic Publishers.

Phytochelatin signal tranduction and cadmium chelation in plants

As plantas utilizam diversas estratégias de sinalização para reconhecer e responder aos stresses ambientais. A maioria das vias de transdução de sinais partilham um sinal genérico, normalmente a modulação dos níveis intracelulares de Ca2+. Esta por sua vez pode iniciar uma cascata de fosforilação proteica que finalmente afecta as proteínas directamente envolvidas na protecção celular ou culmina em factores de transcrição que vão determinar a resposta fisiológica ao stresse. A percepção destes sinais e a compreensão de como estes podem activar as respostas adaptativas são factores-chave para a tolerância das plantas a stresses abióticos. Um dos principais stresses abóticos que restrigem o crescimento das plantas é a presença de metais pesados. A produção de fitoquelatinas e a subsequente quelação dos metais é o mecanismo mais conhecido de tolerância ao stresse metálico em plantas. Fitoquelatinas (PCs) são péptidos com grupos tiol que são sintetizados através da transpeptidação da glutationa (GSH), pela acção da enzima fitoquelatina sintase (PCS). No entanto, até ao momento, as vias de sinalização que levam à síntese de fitoquelatinas e à percepção do stresse metálico são pouco compreendidas. Dentro deste contexto, o presente trabalho foi elaborado com o intuito de elucidar a via de sinalização através da qual o cádmio é detectado pelas células vegetais e induz a síntese de PCs. Quase todos, os estudos de stresses abióticos em plantas apontam para o facto de a sua sinalização se basear nos mesmos tipos de sinais moleculares, nomeadamente a sinalização por cálcio, a fosforilação proteica e a indução de espécies reactivas de oxigénio (ROS). Trabalhos recentes sugerem que a sinalização de PCs poderá envolver todos estes parâmetros. Assim, uma primeira abordagem foi efectuada para compreender a síntese de PCs na espécie Arabidopsis thaliana, através da monitorizaçção da actividade de enzimas relacionadas, a γ-EC sintetase, GSH sintetase e a PC sintase (PCS), assim como o tempo necessário para o elongamento das PCs e a sua acumulação. Seguidamente, ao longo deste processo foi analisada a expressão de sinais específicos, associados com sinais de cálcio, fosforilação proteica e sinalização por ROS. A importância destes factores na síntese de PCs foi também avaliada através do uso de moduladores farmacológicos de cálcio e fosfatases proteicas e também pela indução de stresse oxidativo. Os resultados demonstraram novos dados sobre o papel do cálcio e da fosforilação proteica na produção de PCs e na síntese de GSH, revelando que a actvidade da PCS é regulada por fosforilação e que a sinalização de cálcio pode mediar a síntese de GSH. O envolvimento da sinalização de ROS na síntese de GSH, atráves de crosstalk com a sinalização de cálcio também foi proposta. Assim, os resultados aqui apresentados descrevem uma possível via de sinalização de cádmio nas plantas e da indução de fitoquelatinas. Este trabalho poderá ser portanto muito útil na implementação de novas metodologias de agricultura sustentável e práticas de fitorremediação em solos contaminados com metais pesados.

Efeitos da toxicidade por metais pesados em Rhizobium leguminosarum bv. trifolii: diversidade e resposta de população isoladas de uma mina de chumbo

Nas últimas décadas verificou-se um aumento da contaminação dos solos com metais pesados resultante de processos antropogénicos. As descargas de efluentes industriais, a actividade mineira e a aplicação de lamas residuais e de fertilizantes são as principais fontes de metais pesados. Em certas regiões, a acumulação destes elementos nos solos tem atingido níveis preocupantes para o equilíbrio dos ecossistemas. Vários estudos têm demonstrado que os metais influenciam os microrganismos afectando adversamente o seu crescimento, morfologia e actividades bioquímicas resultando num decréscimo da biomassa e diversidade. Entre os microrganismos do solo, as bactérias pertencentes ao género Rhizobium têm um elevado interesse científico, económico e ecológico devido à sua capacidade para fixar azoto. Deste modo, o trabalho desenvolvido ao longo desta tese incidiu sobre o efeito da toxicidade imposta pelos metais nas bactérias fixadoras de azoto, em particular em Rhizobium leguminosarum bv. trifolii e teve como principais objectivos: determinar o efeito dos metais pesados na sobrevivência e na capacidade de fixar azoto dos isolados de rizóbio; avaliar a influência dos metais na diversidade das populações de rizóbio isoladas de solos contaminados; determinar os níveis de tolerância do rizóbio a diferentes metais e analisar a resposta ao stresse oxidativo imposto pelo cádmio. A Mina do Braçal foi o local de estudo escolhido uma vez que os seus solos estão muito contaminados com metais em resultado da extracção de minério durante mais de 100 anos. Foram escolhidos 3 solos com diferentes graus de contaminação, o solo BC com concentrações reduzidas de metais, escolhido por estar numa zona já fora da mina e designado por solo controlo e os solos BD e BA considerados medianamente e muito contaminados, respectivamente. O Pb e o Cd foram os metais predominantes nestes solos, assim como o metalóide As, cujas concentrações ultrapassaram largamente os limites previstos na lei. Sendo as enzimas do solo boas indicadoras da qualidade do mesmo, foi determinada a actividade de algumas como a desidrogenase (DHA) e a catalase (CAT). Ambas as enzimas correlacionaramse negativamente com as concentrações de metais nos solos. A dimensão das populações indígenas de rizóbio nos solos contaminados (BD e BA) foi bastante baixa, 9,1 bactérias g-1 de solo e 7,3 bactérias g-1 de solo, respectivamente, quando em comparação com a população do solo BC (4,24x104 bactérias g-1 de solo). Estes resultados parecem estar relacionados com o elevado conteúdo em metais e com o pH ácido dos solos. A capacidade simbiótica também foi afectada pela presença de metais, uma vez que os isolados originários do solo BD mostraram menor capacidade em fixar azoto do que os isolados do solo controlo. A diversidade das populações de rizóbio foi determinada com recurso à análise dos perfis de plasmídeos, perfis de REP e ERIC-PCR de DNA genómico e perfis de proteínas e lipopolissacarídeos. No conjunto dos 35 isolados analisados foram identificados 11 plasmídeos com pesos moleculares entre 669 kb e 56 kb. Embora a incidência de plasmídeos tenha sido superior nos isolados do solo BC verificou-se maior diversidade plasmídica na população isolada do solo BD. Resultados similares foram obtidos com os perfis de REP e ERIC-PCR e perfis de proteínas, que indicaram maior diversidade nas populações dos solos contaminados (BD e BA), contrariamente ao verificado por outros autores. O grau de tolerância aos metais pesados e ao arsénio dos vários isolados testados dependeu do metal e do local de origem. No geral, os isolados do solo BD mostraram maior tolerância aos metais do que os isolados do solo controlo, o que está de acordo com o esperado uma vez que geralmente as populações dos locais contaminados são mais tolerantes. Contudo, os isolados do local mais contaminado (BA) foram muito tolerantes apenas ao chumbo mostrando-se sensíveis aos restantes metais. A inoculação dos solos BC, BD e BA após irradiação com estirpes seleccionadas de rizóbio permitiu avaliar a sua sobrevivência ao longo de 12 meses em condições mais realistas. Verificou-se que após um decréscimo inicial, os isolados inoculados no solo BC conseguiram recuperar a dimensão das suas populações para números similares aos inicialmente introduzidos, contrariamente ao verificado no solo BD onde o número de rizóbios decresceu ao longo dos 12 meses. As condições adversas do solo BA apenas permitiram a sobrevivência de 4 isolados até aos 3 meses e apenas dois deles conseguiram sobreviver após 12 meses, designadamente C 3-1 e A 17-3. Estes isolados possuem um plasmídeo de 669 kb que poderá estar na base da sobrevivência destas estirpes. Por outro lado, o último isolado é originário do solo contaminado e por isso estará também mais adaptado a sobreviver às elevadas concentrações de Pb existentes no solo BA. Por fim, constatou-se que o cádmio, um dos metais presente em concentrações mais elevadas nos solos em estudo, é um indutor de stresse oxidativo nos isolados de rizóbio menos tolerantes o que foi confirmado pelo aumento de ROS e danos celulares ao nível dos lípidos.

Cleanup of industrial effluents containing heavy metals: a new opportunity of valorising the biomass produced by brewing industry

Heavy metal pollution is a matter of concern in industrialised countries. Contrary to organic pollutants, heavy metals are not metabolically degraded. This fact has two main consequences: its bioremediation requires another strategy and heavy metals can be indefinitely recycled. Yeast cells of Saccharomyces cerevisiae are produced at high amounts as a by-product of brewing industry constituting a cheap raw material. In the present work, the possibility of valorising this type of biomass in the bioremediation of real industrial effluents containing heavy metals is reviewed. Given the autoaggregation capacity (flocculation) of brewing yeast cells, a fast and off-cost yeast separation is achieved after the treatment of metal-laden effluent, which reduces the costs associated with the process. This is a critical issue when we are looking for an effective, eco-friendly, and low-cost technology. The possibility of the bioremediation of industrial effluents linked with the selective recovery of metals, in a strategy of simultaneous minimisation of environmental hazard of industrial wastes with financial benefits from reselling or recycling the metals, is discussed.

Use of a fluorescence-based approach to assess short-term responses of the alga Pseudokirchneriella subcapitata to metal stress

This work explores the use of fluorescent probes to evaluate the responses of the green alga Pseudokirchneriella subcapitata to the action of three nominal concentrations of Cd(II), Cr(VI), Cu(II) and Zn(II) for a short time (6 h). The toxic effect of the metals on algal cells was monitored using the fluorochromes SYTOX Green (SG, membrane integrity), fluorescein diacetate (FDA, esterase activity) and rhodamine 123 (Rh123, mitochondrial membrane potential). The impact of metals on chlorophyll a (Chl a) autofluorescence was also evaluated. Esterase activity was the most sensitive parameter. At the concentrations studied, all metals induced the loss of esterase activity. SG could be used to effectively detect the loss of membrane integrity in algal cells exposed to 0.32 or 1.3 μmol L−1 Cu(II). Rh123 revealed a decrease in the mitochondrial membrane potential of algal cells exposed to 0.32 and 1.3 μmol L−1 Cu(II), indicating that mitochondrial activity was compromised. Chl a autofluorescence was also affected by the presence of Cr(VI) and Cu(II), suggesting perturbation of photosynthesis. In conclusion, the fluorescence-based approach was useful for detecting the disturbance of specific cellular characteristics. Fluorescent probes are a useful diagnostic tool for the assessment of the impact of toxicants on specific targets of P. subcapitata algal cells.