291 resultados para Freestyle roller skaters


Relevância:

10.00% 10.00%

Publicador:

Resumo:

There is currently no national regulation of fixed site (ex. roller coaster) amusement ride safety. The current regulatory system is highly fragmented and consists of many disparate efforts by State and local agencies, judicial intervention in the form of tort litigation and industry self regulatory compliance. The Federal government has no authority over fixed site ride safety. The authors review the state of fixed site ride regulation and the merits of both centralized and de-centralized regulation, including a proposed Federal statute conferring jurisdiction of the matter upon the Consumer Products Safety Commission. They conclude with proposals for enhancing the management of fixed site ride safety.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The purpose of this study was to correct some mistakes in the literature and derive a necessary and sufficient condition for the MRL to follow the roller-coaster pattern of the corresponding failure rate function. It was also desired to find the conditions under which the discrete failure rate function has an upside-down bathtub shape if corresponding MRL function has a bathtub shape. The study showed that if discrete MRL has a bathtub shape, then under some conditions the corresponding failure rate function has an upside-down bathtub shape. Also the study corrected some mistakes in proofs of Tang, Lu and Chew (1999) and established a necessary and sufficient condition for the MRL to follow the roller-coaster pattern of the corresponding failure rate function. Similarly, some mistakes in Gupta and Gupta (2000) are corrected, with the ensuing results being expanded and proved thoroughly to establish the relationship between the crossing points of the failure rate and associated MRL functions. The new results derived in this study will be useful to model various lifetime data that occur in environmental studies, medical research, electronics engineering, and in many other areas of science and technology.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The addition of hydrogen gas as an alternative fuel source has been widely used, as well reported in scientific literature. Today, several experiments are underway for the use of hydrogen generators (electrolysers) demand for motor vehicles. In all these products their ads manufacturers claim that this provides a reduction of fuel consumption, reduces the emission levels of toxic gas by the discharge and improves engine life. This research analyzes the physical structure of engine components using electrolysis on demand. To this end, a stationary system was fitted with a power generator of electricity, drum roller and adapted two electrolyzers: a dry cell and wet cell other. In steps observation were consumption analyzes in four work load ranges and observing the piston engine, which has been cut and analyzed by Optical Microscopy (OM), Scanning Electron Microscopy and Dispersive Energy (SEM-EDS), X – Ray Diffraction (XRD) and Confocal Microscopy, the stationary system in each step. The results showed a considerable reduction in fuel consumption and a high corrosion in the original factory piston constituted of aluminum-silicon alloy. As corrosion barrier was made a plasma nitriding in the piston head, which proved resistant to attack by hydrogen, although it has presented evidence also, of having been attacked. It is concluded that the automotive electrolysers can be a good choice in terms of consumption and reducing toxic gas emissions, but the material of the combustion chambers of vehicles must be prepared for this purpose.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work describes the synthesis and study of the application of a new surfactant (Triester Lipophilic – TEL) obtained by citric acid with octanol. It is reaction was followed by thin layer chromatography (TLC) and after purification the product was characterized by proton and 13 – carbon nuclear magnetic resonance spectroscopy ( H and 13C NMR), thermogravimetric analysis (TGA) and surface tension analysis of oil-in-water emulsions. The TEL performance as surfactant in ester, n-paraffin and biodiesel based drilling fluids on the 70/30 and 60/40 water- oil rations (WOR) was evaluated by comparative tests of two commercial products used in the fields. These drilling fluids were aged in roller oven at 200 0 F during 16 h. The rheological and electric stability measurements were carried out at 135 ºF, the phase separation was evaluated after seven days at rest and the filtrate volume of drilling fluids was determined at high temperature and high pressure. The rheological behavior of the drilling fluids was evaluated by the flow curves. The results showed that the drilling fluids studied here presented Binghamian behavior as well as the used in the oil fields. The laboratory tests showed that the TEL reduced the filtrate volume and promoted the enhance of the thermal and mechanical stabilities.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The major objectives of this thesis were to determine if foam rolling had any effect on antagonist muscle activation and whether those changes would alter muscular co-activation patterns. The results from this thesis along with current literature will help clinicians to develop adequate exercise prescription for rehabilitative and pre-activity purposes. The existing literature has shown that foam rolling or roller massagers can increase range of motion (ROM), improve performance, and alter pain perception, however little research exists regarding changes in muscle activation following foam rolling. This study developed a reliable method for measuring muscle activation around the knee joint and using that method found that foam rolling the quadriceps can impair hamstrings muscle activation likely due to greater levels of perceived pain when rolling the quadriceps.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

General note: Title and date provided by Bettye Lane.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

General note: Title and date provided by Bettye Lane.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

General note: Title and date provided by Bettye Lane.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

General note: Title and date provided by Bettye Lane.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coccolithophores play an important role in organic matter export due to their production of the mineral calcite that can act as ballast. Recent studies indicated that calcification in coccolithophores may be affected by changes in seawater carbonate chemistry. We investigated the influence of CO2 on the aggregation and sinking behaviour of the coccolithophore Emiliania huxleyi (PML B92/11) during a laboratory experiment. The coccolithophores were grown under low (~180 µatm), medium (~380 µatm), and high (~750 µatm) CO2 conditions. Aggregation of the cells was promoted using roller tables. Size and settling velocity of aggregates were determined during the incubation using video image analysis. Our results indicate that aggregate properties are sensitive to changes in the degree of ballasting, as evoked by ocean acidification. Average sinking velocity was highest for low CO2 aggregates (~1292 m d-1) that also had the highest particulate inorganic to particulate organic carbon (PIC/POC) ratio. Lowest PIC/POC ratios and lowest sinking velocity (~366 m d-1) at comparable sizes were observed for aggregates of the high CO2 treatment. Aggregates of the high CO2 treatment showed a 4-fold lower excess density (~4.2*10**-4 g cm**-3) when compared to aggregates from the medium and low CO2 treatments (~1.7 g*10**-3 cm**-3). We also observed that more aggregates formed in the high CO2 treatment, and that those aggregates contained more bacteria than aggregates in the medium and low CO2 treatment. If applicable to the future ocean, our findings suggest that a CO2 induced reduction of the calcite content of aggregates could weaken the deep export of organic matter in the ocean, particularly in areas dominated by coccolithophores.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

El periplo de Hannón, frente a las propuestas que lo interpretan como una obra literaria, creemos que recoge un periplo auténtico, que sólo alcanzó cabo Juby y algunas de las Islas Canarias. Las refundaciones cartaginesas fueron todas en la Mauretania fértil, en los 7 primeros días de la expedición. Desde el islote de Kérne, en la expedición primó una primera exploración de evaluación, indicativo de que se trataba de apenas 2 o 3 barcos, con una tripulación limitada, que evitaban enfrentamientos con la población local. Los intérpretes Lixítai parecen conocer todos los puntos explorados, el río Chrétes, los etíopes del Alto Atlas costero, el gran golfo caluroso que finalizaba en el Hespérou Kéras, el volcán Theôn Óchema, o las gentes salvajes que denominaban Goríllai. Probablemente la mayor sorpresa fuese encontrar un volcán activo, emitiendo lava, que pudo ser la razón última para redactar este periplo. La falta de agua, alimentos y caza como razón para finalizar la expedición exploratoria sólo es comprensible en un trayecto corto que alcanzó hasta el inicio del desierto del Sahara. Otro tanto sucede con la ausencia de ríos importantes al Sur del río Chrétes, una clara prueba de que no se alcanzaron latitudes ecuatoriales y que los barcos se fueron alejando de la costa norteafricana.