The influence of a novel simulated learning environment upon student clinical subjective refraction performance: A pilot study

Background: Optometry students are taught the process of subjective refraction through lectures and laboratory based practicals before progressing to supervised clinical practice. Simulated learning environments (SLEs) are an emerging technology that are used in a range of health disciplines, however, there is limited evidence regarding the effectiveness of clinical simulators as an educational tool. Methods: Forty optometry students (20 fourth year and 20 fifth year) were assessed twice by a qualified optometrist (two examinations separated by 4-8 weeks) while completing a monocular non-cycloplegic subjective refraction on the same patient with an unknown refractive error simulated using contact lenses. Half of the students were granted access to an online SLE, The Brien Holden Vision Institute (BHVI®) Virtual Refractor, and the remaining students formed a control group. The primary outcome measures at each visit were; accuracy of the clinical refraction compared to a qualified optometrist and relative to the Optometry Council of Australia and New Zealand (OCANZ) subjective refraction examination criteria. Secondary measures of interest included descriptors of student SLE engagement, student self-reported confidence levels and correlations between performance in the simulated and real world clinical environment. Results: Eighty percent of students in the intervention group interacted with the SLE (for an average of 100 minutes); however, there was no correlation between measures of student engagement with the BHVI® Virtual Refractor and speed or accuracy of clinical subjective refractions. Fifth year students were typically more confident and refracted more accurately and quickly than fourth year students. A year group by experimental group interaction (p = 0.03) was observed for accuracy of the spherical component of refraction, and post hoc analysis revealed that less experienced students exhibited greater gains in clinical accuracy following exposure to the SLE intervention. Conclusions: Short-term exposure to a SLE can positively influence clinical subjective refraction outcomes for less experienced optometry students and may be of benefit in increasing the skills of novice refractionists to levels appropriate for commencing supervised clinical interactions.

Noviisiopettajana peruskoulussa : Aloittelevien opettajien autenttisia kokemuksia ensimmäisestä opettajavuodesta

As a Novice Teacher at Comprehensive School: The authentic experiences of the beginning teachers during their first year of teaching The aim of this study is to explicate the novice year of teaching in the light of teachers´ authentic experiences. The subject of this investigation is the teachers´ subjective world of experience during their first academic year of teaching and the sharing of these experiences in collaborative consulting meetings. The themes discussed in the meetings were introduced into the collaborative group by the novice teachers themselves, and the progress of discussion was con-trolled by them. The research data was gathered in a consultative working group where the way a novice teacher starts to interpret, analyze and identify his/her own complex and dynamic teaching situations was observed. The research data gathered in this way illuminates novice teachers´ world of experience and mental picture as well as the unconscious sides of school life. In a theoretical frame of reference, the work of a teacher is identified, according to systemic scientific thought, as a dynamic triangle in which the basic elements are the personality of the teacher, the role of the teacher and the school as an organization. These basic elements form a whole within which the teacher works. The dynamics of this triangle in a teacher’s work are brought to light through the study of the phenomena of groups and group dynamics since a teacher works either as a member of a group (working community), as a leader of a group (teaching situations) or in a network (parent – teacher cooperation). Therefore, tension and force are always present in teaching work. The main research problem was to explain how a novice teacher experiences his/her first working year as a teacher. The participants (n=5) were teaching at five different comprehensive schools in the city of Helsinki. This was their first long-term post as a teacher. The research data consists of seven collaborative consulting meetings, as well as recordings and transcripts of the meetings. A classificatory framework was developed for data analysis which enabled a sys-tematic qualitative content analysis based on theory and material. In addition to the consulting meetings, the teachers were interviewed at the beginning and at the end of the process of collecting the research material. The interviews were used to interpret the meanings of the content analysis based on raw data. The findings show that there is a gap between teacher education and the reality of school life, which causes difficulties for a novice teacher during his/her first teaching year. The gap is rather a global educational problem than a national one, and therefore it is independent of cultural factors. Novice teachers desire a well-structured theory of teacher education and a clear programme where the themes and content delve deeper and deeper into the subject matter during the study years. According to the novice teachers, teacher education frequently consists of sporadic and unconnected study and class situations. An individual content weakness of teacher education is the lack of insufficient initiation into evaluation processes. The novice teachers suggest that a student must be provided good-quality and competent guidance during the study years and during his or her induction. There should be a well-organized, structured and systematic induction program for novice teachers. The induction program should be overseen by an organization so that the requirements of a qualified induction can be met. The findings show that the novice teachers find the first year of teaching at comprehensive school emotionally loaded. The teachers experienced teaching as difficult work and found the workload heavy. Nevertheless, they enjoyed their job because, as they said, there were more pleasant than unpleasant things in their school day. Their main feeling at school was the joy of success in teaching. The novice teachers felt satisfaction with their pupils. The teachers experienced the more serious feelings of anger and disgust when serious violence took place. The most difficult situations arose from teaching pupils who had mental health problems. The toughest thing in the teacher´s work was teaching groups that are too heterogeneous. The most awkward problems in group dynamics happened when new immigrants, who spoke only their own languages, were integrated into the groups in the middle of the school year. Teachers wanted to help children who needed special help with learning but restated at the same time that the groups being taught shouldn’t be too heterogeneous. The teachers wished for help from school assistants so that they could personally concentrate more on teaching. Not all the parents took care of their children according to the comprehensive school law. The teachers found it hard to build a confidential relationship between home and school. In this study, novice teachers found it hard to join the teaching staff at school. Some of the teachers on staff were very strong and impulsive, reacting loudly and emotionally. These teachers provoked disagreement, conflicts, power struggles and competition among the other teachers. Although the novice teachers of the study were all qualified teachers, three of them were not interested in a permanent teaching job. For these teachers teaching at a primary school was just a project, a short period in their working life. They will remain in the teaching profession as long as they are learning new things and enjoying their teaching job. This study is an independent part of the research project on Interplay – Connecting Academic Teacher Education and Work, undertaken by the Department of Applied Sciences of Education at the University of Helsinki. Key words: novice teacher, emotions, groups and group dynamics, authority, co-operation between home and school, teacher community, leadership at school, induction, consulting

Pre-service early childhood teachers and designers partnering for change at The Lone Pine Koala Sanctuary: An interdisciplinary education and design for sustainability project

This presentation discusses and critiques a current case study of a project in which Early Childhood preservice teachers are working in partnership with Design students to develop principles and concepts for the design and construction of an early childhood centre. This centre, to be built on the grounds of the iconic Lone Pine Koala Sanctuary in Brisbane , focuses on Education for Sustainability (EfS), sustainable design and sustainable business. Interdisciplinary initiatives between QUT staff and students from two Faculties (Education and Creative Industries) have been situated in the real –world context of this project. This practical, authentic project has seen stakeholders take an interdisciplinary approach to sustainability, opening up new ways of thinking about early childhood centre design, particularly with respect to operation and function. Interdisciplinarity and a commitment to genuine partnerships have created intellectual spaces to re-think the potential of the disciplines to be interwoven so that future professionals from different fields might come together to learn from each other and to address the sustainability imperative. The case study documents and explores the possibilities that the Lone Pine project offers for academics and students from Early Childhood and Design to collaboratively inform the Sanctuary’s vision for the Centre. The research examines how students benefit from practical, real world, community-integrated learning; how academic staff across two disciplines are able to work collaboratively within a real-world context; and how external stakeholders experience and benefit from the partnership with university staff and students. Data were collected via a series of focus group and individual interviews designed to explore how the various stakeholders (staff, students, business partners) experienced their involvement in the interdisciplinary project. Inductive and deductive thematic analysis of these data suggest many benefits for participants as well as a number of challenges. Findings suggest that the project has provided students with ‘real world’ partnerships that reposition early childhood students’ identities from ‘novice’ to ‘professional’, where their knowledge, expertise and perspectives are simultaneously validated and challenged in their work with designers. These partnerships are enabling preservice teachers to practice a new model of early childhood leadership in sustainability, one that is vital for leading for change in an increasingly complex world. This presentation celebrates, critiques and problematises this project, exploring wider implications for other contexts in which university staff and students may seek to work across traditional boundaries, thus building partnerships for change.

Applying the principles of interpretive field research: An example of an IS case study on shared services

All sound research commence with the selection of a research paradigm. The chosen research paradigm is significant in shaping the researcher’s perspectives of the world and it is a vital step in any study’s’ research design. There are different paradigms that IS researchers can choose from; amongst which the interpretive paradigm is growing in acceptance.. Though interpretive research has emerged as an important strand in Information Systems (IS), guidelines on how to conduct interpretive research and how to evaluate them have been scarce. Klein and Myers presented seven principles with examples for each from three case examples. While these principles are much valued, there is a lack of support for novice researchers on how to embed these principles in an overall research design, which could help with the aid of a detailed example that has done so. Thus, this paper aims to address this gap, and presents how Klein and Myers’s principles were applied within an example study that investigated shared services in the Malaysian Higher Education context. The example study adopted the interpretive paradigm as the most suited approach that fitted their research questions and goals. More details about the selection and adoption of the Klein and Myers’s guidelines in the context of the shared services research case study are presented in the paper.

Structuring time and questioning to achieve tactical awareness in games lessons

Background: A paradigm shift in educational policy to create problem solvers and critical thinkers produced the games concept approach (GCA) in Singapore's Revised Syllabus for Physical Education (1999). A pilot study (2001) conducted on 11 primary school student teachers (STs) using this approach identified time management and questioning as two of the major challenges faced by novice teachers. Purpose: To examine the GCA from three perspectives: structure—lesson form in terms of teacher-time and pupil-time; product—how STs used those time fractions; and process—the nature of their questioning (type, timing, and target). Participants and setting: Forty-nine STs from three different PETE cohorts (two-year diploma, four-year degree, two-year post-graduate diploma) volunteered to participate in the study conducted during the penultimate week of their final practicum in public primary and secondary schools. Intervention: Based on the findings of the pilot study, PETE increased the emphasis on GCA content specific knowledge and pedagogical procedures. To further support STs learning to actualise the GCA, authentic micro-teaching experiences that were closely monitored by faculty were provided in schools nearby. Research design: This is a descriptive study of time-management and questioning strategies implemented by STs on practicum. Each lesson was segmented into a number of sub-categories of teacher-time (organisation, demonstration and closure) and pupil-time (practice time and game time). Questions were categorised as knowledge, technical, tactical or affective. Data collection: Each ST was video-taped teaching a GCA lesson towards the end of their final practicum. The STs individually determined the timing of the data collection and the lesson to be observed. Data analysis: Each lesson was segmented into a number of sub-categories of both teacher- and pupil-time. Duration recording using Noldus software (Observer 4.0) segmented the time management of different lesson components. Questioning was coded in terms of type, timing and target. Separate MANOVAs were used to measure the difference between programmes and levels (primary and secondary) in relation to time-management procedures and questioning strategies. Findings: No differences emerged between the programmes or levels in their time-management or questioning strategies. Using the GCA, STs generated more pupil time (53%) than teacher time (47%). STs at the primary level provided more technical practice, and those in secondary schools more small-sided game play. Most questions (58%) were asked during play or practice but were substantially low-order involving knowledge or recall (76%) and only 6.7% were open-ended or divergent and capable of developing tactical awareness. Conclusions: Although STs are delivering more pupil time (practice and game) than teacher-time, the lesson structure requires further fine-tuning to extend the practice task beyond technical drills. Many questions are being asked to generate knowledge about games but lack sufficient quality to enhance critical thinking and tactical awareness, as the GCA intends.

Young driver perceptions of police traffic enforcement and self reported driving offences

Purpose Road policing is a key method used to improve driver compliance with road laws. However, we have a very limited understanding of the perceptions of young drivers regarding police enforcement of road laws. This paper addresses this gap. Design/Methodology/Approach Within this study 238 young drivers from Queensland, Australia, aged 17-24 years (M = 18, SD = 1.54), with a provisional (intermediate) driver’s licence completed an online survey regarding their perceptions of police enforcement and their driver thrill seeking tendencies. This study considered whether these factors influenced self-reported transient (e.g., travelling speed) and fixed (e.g., blood alcohol concentration) road violations by the young drivers. Findings The results indicate that being detected by police for a traffic offence, and the frequency with which they display P-plates on their vehicle to indicate their licence status, are associated with both self-reported transient and fixed rule violations. Licence type, police avoidance behaviours and driver thrill seeking affected transient rule violations only, while perceptions of police enforcement affected fixed rule violations only. Practical implications This study suggests that police enforcement of young driver violations of traffic laws may not be as effective as expected and that we need to improve the way in which police enforce road laws for young novice drivers. Originality/value: This paper identifies that perceptions of police enforcement by young drivers does not influence all types of road offences.

Future chemistry teachers use of knowledge dimensions and high-order cognitive skills in pre-laboratory concept maps

This poster describes a pilot case study, which aim is to study how future chemistry teachers use knowledge dimensions and high-order cognitive skills (HOCS) in their pre-laboratory concept maps to support chemistry laboratory work. The research data consisted of 168 pre-laboratory concept maps that 29 students constructed as a part of their chemistry laboratory studies. Concept maps were analyzed by using a theory based content analysis through Anderson & Krathwohls' learning taxonomy (2001). This study implicates that novice concept mapper students use all knowledge dimensions and applying, analyzing and evaluating HOCS to support the pre-laboratory work.

Investigating novelty-outcome relationships in engineering design

Design creativity involves developing novel and useful solutions to design problems The research in this article is an attempt to understand how novelty of a design resulting from a design process is related to the kind of outcomes. described here as constructs, involved in the design process A model of causality, the SAPPhIRE model, is used as the basis of the analysis The analysis is based on previous research that shows that designing involves development and exploration of the seven basic constructs of the SAPPhIRE model that constitute the causal connection between the various levels of abstraction at which a design can be described The constructs am state change, action, parts. phenomenon. input. organs. and effect The following two questions are asked. Is there a relationship between novelty and the constructs? If them is a relationship, what is the degree of this relationship? A hypothesis is developed to answer the questions an increase in the number and variety of ideas explored while designing should enhance the variety of concept space. leading to an increase in the novelty of the concept space Eight existing observational studies of designing sessions are used to empirically validate the hypothesis Each designing session involves an individual designer. experienced or novice. solving a design problem by producing concepts and following a think-aloud protocol. The results indicate dependence of novelty of concept space on variety of concept space and dependence of variety of concept space on variety of idea space. thereby validating the hypothesis The Jesuits also reveal a strong correlation between novelty and the constructs, correlation value decreases as the abstraction level of the constructs reduces. signifying the importance of using constructs at higher abstraction levels for enhancing novelty

Multiple Perspectives on Networks: Conceptual Development, Application and Integration in an Entrepreneurial Context

Multiple Perspectives on Networks: Conceptual Development, Application and Integration in an Entrepreneurial Context. The purpose of this thesis is to enhance cross-fertilization between three different approaches to network research. The business network approach may contribute in terms of how relationships are created, developed and how tie content changes within ties, not only between them. The social network approach adds to the discussion by offering concepts of structural change on a network level. The network approach in entrepreneurship contributes by emphasizing network content, governance and structure as a way of understanding and capturing networks. This is discussed in the conceptual articles, Articles 2 and 3. The ultimate purpose of this thesis is to develop a theoretical and empirical understanding of network development processes. This is fulfilled by presenting a theoretical framework, which offers multiple views on process as a developmental outcome. The framework implies that change ought to be captured both within and among relationships over time in the firm as well as in the network. Consequently, changes in structure and interaction taking place simultaneously need to be included when doing research on network development. The connection between micro and macro levels is also stressed. Therefore, the entrepreneur or firm level needs to be implemented together with the network level. The surrounding environment impacts firm and network development and vice versa and hence needs to be integrated. Further, it is necessary to view network development not only as a way forward but to include both progression and regression as inevitable parts of the process. Finally, both stability and change should be taken into account as part of network development. Empirical results in Article 1 show support for a positive impact of networks on SME internationalization. Article 4 compares networks of novice, serial and portfolio entrepreneurs but the empirical results show little support for differences in the networks by type of entrepreneur. The results demonstrate that network interaction and structure is not directly impacted by type of entrepreneur involved. It indicates instead that network structure and interaction is more impacted by the development phase of the firm. This in turn is in line with the theoretical implications, stating that the development of the network and the firm impacts each other, as they co-evolve.

University Students' Approaches to Learning, Self-Regulation, and Cognitive and Attributional Strategies : Connections with Well-Being and Academic Success

This dissertation empirically explores the relations among three theoretical perspectives: university students approaches to learning, self-regulated learning, as well as cognitive and attributional strategies. The relations were quantitatively studied from both variable- and person-centered perspectives. In addition, the meaning that students gave to their disciplinary choices was examined. The general research questions of the study were: 1) What kinds of relationships exist among approaches to learning, regulation of learning, and cognitive and attributional strategies? What kinds of cognitive-motivational profiles can be identified among university students, and how are such profiles related to study success and well-being? 3) How do university students explain their disciplinary choices? Four empirical studies addressed these questions. Studies I, II, and III were quantitative, applying self-report questionnaires, and Study IV was qualitative in nature. Study I explored relations among cognitive strategies, approaches to learning, regulation of learning, and study success by using correlations and a K-means cluster analysis. The participants were 366 students from various faculties at different phases of their studies. The results showed that all the measured constructs were logically related to each other in both variable- and person-centered approaches. Study II further examined what kinds of cognitive-motivational profiles could be identified among first-year university students (n=436) in arts, law, and agriculture and forestry. Differences in terms of study success, exhaustion, and stress among students with differing profiles were also looked at. By using a latent class cluster analysis (LCCA), three groups of students were identified: non-academic (34%), self-directed (35%), and helpless students (31%). Helpless students reported the highest levels of stress and exhaustion. Self-directed students received the highest grades. In Study III, cognitive-motivational profiles were identified among novice teacher students (n=213) using LCCA. Well-being, epistemological beliefs, and study success were looked at in relation to the profiles. Three groups of students were found: non-regulating (50%), self-directed (35%), and non-reflective (22%). Self-directed students again received the best grades. Non-regulating students reported the highest levels of stress and exhaustion, the lowest level of interest, and showed the strongest preference for certain and practical knowledge. Study IV, which was qualitative in nature, explored how first-year students (n = 536 ) in three fields of studies, arts, law, and veterinary medicine explained their disciplinary choices. Content analyses showed that interest appeared to be a common concept in students description of their choices across the three faculties. However, the objects of interest of the freshmen appeared rather unspecified. Veterinary medicine and law students most often referred to future work or a profession, whereas only one-fifth of the arts students did so. The dissertation showed that combining different theoretical perspectives and methodologies enabled us to build a rich picture of university students cognitive and motivational predispositions towards studying and learning. Further, cognitive-emotional aspects played a significant role in studying, not only in relation to study success, but also in terms of well-being. Keywords: approaches to learning, self-regulation, cognitive and attributional strategies, university students

Dimensions of University Student Learning in Medicine and Pharmacy

Study orientations in higher education consist of various dimensions, such as approaches to learning, conceptions of learning and knowledge (i.e. epistemologies), self-regulation, and motivation. They have also been measured in different ways. The main orientations typically reported are reproducing and meaning orientations. The present study explored dimensions of study orientations, focusing in particular on pharmacy and medicine. New versions of self-report instruments were developed and tested in various contexts and in two countries. Furthermore, the linkages between study orientations and students epistemological development were explored. The context of problem-based (PBL) small groups was investigated in order to better understand how collaboration contributes to the quality of learning. The participants of Study I (n=66) were pharmacy students, who were followed during a three-year professionally oriented program in terms of their study orientations and epistemologies. A reproducing orientation to studying diminished during studying, whereas only a few students maintained their original level of meaning orientation. Dualism was found to be associated with a reproducing orientation. In Study II practices associated with deep and surface approaches to learning were measured in two differing ways, in order to better distinguish between what students believed to be useful in studying, and the extent to which they applied their beliefs to practice when preparing for examinations. Differences between domains were investigated by including a sample of Finnish and Swedish medical students (n=956) and a Finnish non-medical sample of university students (n=865). Memorizing and rote learning appeared as differing components of a surface approach to learning, while understanding, relating, and critical evaluation of knowledge emerged as aspects of a deep approach to learning. A structural model confirmed these results in both student samples. Study III explored a wide variety of dimensions of learning in medical education. Swedish medical students (n=280) answered the questionnaire. The deep approach to learning was strongly related to collaboration and reflective learning, whereas the surface approach was associated with novice-like views of knowledge and the valuing of certain and directly applicable knowledge. PBL students aimed at understanding, but also valued the role of memorization. Study IV investigated 12 PBL tutorial groups of students (n=116) studying microbiology and pharmacology in a medical school. The educational application was expected to support a deep approach to learning: Group members course grades in a final examination were related to the perceived functioning of the PBL tutorial groups. Further, the quality of cases that had been used as triggers for learning, was associated with the quality of small group functioning. New dimensions of study orientations were discovered. In particular, novel, finer distinctions were found within the deep approach component. In medicine, critical evaluation of knowledge appeared to be less valued than understanding and relating. Further, collaboration appeared to be closely related to the deep approach, and it was also important in terms of successful PBL studying. The results of the studies confirmed the previously found associations between approaches to learning and study success, but showed interesting context- and subgroup-related differences in this respect. Students ideas about the nature of knowledge and their approaches to learning were shown to be closely related. The present study expanded our understanding of the dimensions of study orientations, of their development, and their contextual variability in pharmacy and medicine.

A Compliant Mechanism Kit with Flexible Beams and Connectors

We present the concept, prototypes, and an optimal design method for a compliant mechanism kit as a parallel to the kits available for rigid-body mechanisms. The kit consists of flexible beams and connectors that can be easily hand-assembled using snap fits. It enables users, using their creativity and mechanics intuition, to quickly realize a compliant mechanism. The mechanisms assembled in this manner accurately capture the essential behavior of the topology, shape, size and material aspects and thereby can lead the way for a real compliant mechanism for practical use. Also described in this paper are the design of the connector to which flexible beams can be added in eight different directions; and prototyping of the spring steel connectors as well as beams using wire-cut electro discharge machining. It is noted in this paper that the concept of the kit also resolves a discrepancy in the finite element (FE) modeling of beam-based compliant mechanisms. The discrepancy arises when two or more beams are joining at one point and thus leading to increased stiffness. After resolving this discrepancy, this work extends the topology optimization to automatically generate designs that can be assembled with the kit. Thus, the kit and the accompanying analysis and optimal synthesis procedures comprise a self-contained educational as well as a research and pragmatic toolset for compliant mechanisms. The paper also illustrates how human creativity finds new ways of using the kit beyond the original intended use and how it is useful even for a novice to design compliant mechanisms.

A compliant mechanism kit with flexible beams and connectors along with analysis and optimal synthesis procedures

We present a compliant mechanism kit as a parallel to the kits available for rigid-body mechanisms. The kit consists of flexible beams and connectors that can be easily hand-assembled using snap fits. The mechanisms assembled using the kit accurately capture the aspects of the topology, shape, and size of joint-free compliant mechanisms. Thus, the kit enables designers to conceive and design new, practicable, single-piece compliant mechanisms that do not require assembly. The concept of the kit also resolves a discrepancy in the finite element (FE) modeling of beam-based compliant mechanisms. The discrepancy arises when two or more beams are joined at one point and thus leading to increased stiffness. After resolving this discrepancy, this work extends the topology optimization to automatically generate designs that can be assembled with the kit for quick and easy validation instead of time-consuming prototyping. Thus, the kit and the accompanying analysis and optimal synthesis procedures comprise a self-contained educational as well as a research and practice toolset for compliant mechanisms. The paper also illustrates how human creativity finds new ways of using the kit beyond the original intended use and how it enables even a novice to design compliant mechanisms. (C) 2011 Elsevier Ltd. All rights reserved.

Enhancing reproducibility of ultrasonic measurements by new users

Perception of operator influences ultrasound image acquisition and processing. Lower costs are attracting new users to medical ultrasound. Anticipating an increase in this trend, we conducted a study to quantify the variability in ultrasonic measurements made by novice users and identify methods to reduce it. We designed a protocol with four presets and trained four new users to scan and manually measure the head circumference of a fetal phantom with an ultrasound scanner. In the first phase, the users followed this protocol in seven distinct sessions. They then received feedback on the quality of the scans from an expert. In the second phase, two of the users repeated the entire protocol aided by visual cues provided to them during scanning. We performed off-line measurements on all the images using a fully automated algorithm capable of measuring the head circumference from fetal phantom images. The ground truth (198.1 +/- 1.6 mm) was based on sixteen scans and measurements made by an expert. Our analysis shows that: (1) the inter-observer variability of manual measurements was 5.5 mm, whereas the inter-observer variability of automated measurements was only 0.6 mm in the first phase (2) consistency of image appearance improved and mean manual measurements was 4-5 mm closer to the ground truth in the second phase (3) automated measurements were more precise, accurate and less sensitive to different presets compared to manual measurements in both phases. Our results show that visual aids and automation can bring more reproducibility to ultrasonic measurements made by new users.

Ideas generated in conceptual design and their effects on creativity

Search of design spaces to generate solutions affects the design outcomes during conceptual design. This research aims to understand the different types of search that occurs during conceptual design and their effect on the design outcomes. Additionally, we study the effect of other factors, such as creativity, problem-solving style, and experience of designers, on the design outcomes. Two sets of design experiments, with experienced and novice designers, are used in this study. We find that designers employ twelve different types of searches during conceptual design for problem understanding, solution generation, and solution evaluation activities. Results also suggest that creativity is influenced positively by the type and amount of searches, duration of designing, and experience of designers.