A model for evaluation of generic competences in engineering: application to the problem-solving competence at UPM.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help teachers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with a two-fold objective: a) To develop a model for teaching and evaluating core competences that is useful and easily applicable to its different degrees, and b) to provide support to teachers by creating an area within the Website for Educational Innovation where they can search for information on the model corresponding to each core competence approved by UPM. Information available on each competence includes its definition, the formulation of indicators providing evidence on the level of acquisition, the recommended teaching and evaluation methodology, examples of evaluation rules for the different levels of competence acquisition, and descriptions of best practices. These best practices correspond to pilot tests applied to several of the academic subjects conducted at UPM in order to validate the model. This work describes the general procedure that was used and presents the model developed specifically for the problem-solving competence. Some of the pilot experiences are also summarised and their results analysed

Considerations on the success rate in aeronautical engineering studies in Spain

The relationship between different learning evaluation methods and the academic success in an aeronautical engineering degree in Spain is analysed. The study is based on data about the evolution of academic achievement obtained along the last ten year, along which the evaluation and learning’s methods have suffered huge changes.

Final year project: students and instructors perceptions as a competence-strengthening tool for engineering students

This work indicates the importance of the Final Year Project (FYP) in the strengthening of competences of engineering students. The study also shows which personal competences of students are reinforced most during the FYP process,including the preparation, elaboration, presentation and defence stages. In order to gather information on this subject, a survey was conducted at two different Spanish technical universities—one public and one private—and a comparative analysis was performed of the questionnaires collected. The competence model considered is that used by the Accreditation Board for Engineering and Technology (ABET), since the official title of the public university has been accredited by this model. The results indicate which personal and professional competences of students are reinforced well by undertaking the FYP. Any significant differences in response by university are explained in the study. For validation purposes, the results were contrasted with the instructor’s perspective using the triangulation methodology. Finally, the conclusions drawn will permit the design of new study plans to cope more effectively with the challenges of the FYP in the new Bologna framework.

The Learning of the Mathematical Models to Aid Decision Making in the High Level Engineering Schools?

At present, in the University curricula in most countries, the decision theory and the mathematical models to aid decision making is not included, as in the graduate program like in Doctored and Master´s programs. In the Technical School of High Level Agronomic Engineers of the Technical University of Madrid (ETSIA-UPM), the need to offer to the future engineers training in a subject that could help them to take decisions in their profession was felt. Along the life, they will have to take a lot of decisions. Ones, will be important and others no. In the personal level, they will have to take several very important decisions, like the election of a career, professional work, or a couple, but in the professional field, the decision making is the main role of the Managers, Politicians and Leaders. They should be decision makers and will be paid for it. Therefore, nobody can understand that such a professional that is called to practice management responsibilities in the companies, does not take training in such an important matter. For it, in the year 2000, it was requested to the University Board to introduce in the curricula an optional qualified subject of the second cycle with 4,5 credits titled " Mathematical Methods for Making Decisions ". A program was elaborated, the didactic material prepared and programs as Maple, Lingo, Math Cad, etc. installed in several IT classrooms, where the course will be taught. In the course 2000-2001 this subject was offered with a great acceptance that exceeded the forecasts of capacity and had to be prepared more classrooms. This course in graduate program took place in the Department of Applied Mathematics to the Agronomic Engineering, as an extension of the credits dedicated to Mathematics in the career of Engineering.

New methodology on Applied Geology and Geology for Engineers education by using practical trip

There has been much discussion on the primacy of theory over practice. Today prevails the exaggeration of practice. This idea forgets too that teaching problem is a problem of right balance. The approach of the action lines on the European Higher Education Area (EHEA) framework provides for such balance. Applied Geology subject represents the first real contact with the physical environment with the practice profession and works. Besides, the situation of the topic in the first trace of Study Plans for many students implies the link to other subjects and topics of the career. This work analyses in depth the justification of such practical trips only on Applied Geology. This methodology could be usual in Study Plans of pure sciences career, Geology or Biology, but not in Civil Engineering like teaching method. It shows the criteria and methods of planning and the result which manifests itself in pupils. Therefore, work shows a methodology taking in account the engineering perspective, the practical point of view and the learning process inside students and their evaluation and, hence, their marks.

UBURYO: open source software for managing microcredits in education

One of the major problems in developing countries is minority access to higher education. Traditional scholarships usually focus on paying tuition fees for bringing brilliant students to developed countries (from where they seldom return). But local grants seldom target the more needy students. We propose a system of student loans to pay tuition fees in exchange for technical work. This appears to be a satisfactory and sustainable solution. We also provide UBURYO (a Kirundi word meaning opportunity). UBURYO is the free open source software, that we have developed, to manage this loan system in a simple, trustworthy, fair and efficient way.

Integrated learning of production engineering software applications in a shipbuilding context

Acourse focused on the acquisition of integration competencies in ship production engineering, organized in collaboration with selected industry partners, is presented in this paper. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using MS-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity with the final one being the construction planning of a vessel. The second part of the course is dedicated to the use of a database manager, MS-ACCESS, in managing production related information.Aseries of increasing complexity examples is treated, the final one being the management of the piping database of a real vessel. This database consists of several thousand pipes, for which a production timing frame is defined connecting this part of the course with the first one. Finally, the third part of the course is devoted to working withFORAN,an Engineering Production application developed bySENERand widely used in the shipbuilding industry. With this application, the structural elements where all the outfittings will be located are defined through cooperative work by the students, working simultaneously in the same 3D model. In this paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feedback from their experience as well as to assess their satisfaction with the learning process, compared to more traditional ones. Results from these surveys are discussed in the paper.

Integrating Generic Competences into Engineering Curricula

The new degrees in Spanish universities generated as a result of the Bologna process, stress a new dimension: the generic competencies to be acquired by university students (leadership, problem solving, respect for the environment, etc.). At Universidad Polite¿cnica de Madrid a teaching model was defined for two degrees: Graduate in Computer Engineering and Graduate in Software Engineering. Such model incorporates the training, development and assessment of generic competencies planned in these curricula. The aim of this paper is to describe how this model was implemented in both degrees. The model has three components. The first refers to a set of seven activities for introducing mechanisms for training, development and assessment of generic competencies. The second component aims to coordinate actions that implement the competencies across courses (in space and time). The third component consists of a series of activities to perform quality control. The implementation of generic competencies was carried out in first year courses (first and second semesters), together with the planning for second year courses (third and fourth semesters). We managed to involve a high percentage of first-year courses (80%) and the contacts that have been initiated suggest a high percentage in the second year as well.

Teamwork competence and academic motivation in computer science engineering studies.

The present work is focused on studying two issues: the “teamwork” generic competence and the “academic motivation”. Currently the professional profile of engineers has a strong component of teamwork. On the other hand, motivational profile of students determines their tendencies when they come to work in team, as well as their performance at work. In this context we suggest four hypotheses: (H1) students improve their teamwork capacity by specific training and carrying out a set of activities integrated into an active learning process; (H2) students with higher mastery motivation have better attitude towards team working; (H3) students with higher mastery motivation obtain better results in academic performance; and (H4) students show different motivation profiles in different circumstances: type of courses, teaching methodologies, different times of the learning process. This study was carried out with computer science engineering students from two Spanish universities. The first results point to an improvement in teamwork competence of students if they have previously received specific training in facets of that competence. Other results indicate that there is a correlation between the motivational profiles of students and their perception about teamwork competence. Finally, and contrary to the initial hypothesis, these profiles appear to not influence significantly the academic performance of students.

A Coordinated Plan for Teaching Software Engineering in the University Rey Juan Carlos.

Un plan para organizar las enseñanzas de la ingeniería del software en las titulaciones de informática de la URJC. Nowadays both industry and academic environments are showing a lot of interest in the Software Engineering discipline. Therefore, it is a challenge for universities to provide students with appropriate training in this area, preparing them for their future professional practice. There are many difficulties to provide that training. The outstanding ones are: the Software Engineering area is too broad and class hours are scarce; the discipline requires a high level of abstraction; it is difficult to reproduce real world situations in the classroom to provide a practical learning environment; the number of students per professor is very high (at least in Spain); companies develop software with a maturity level rarely over level 2 of the CMM for Software (again, at least in Spain) as opposed to what is taught at the University. Besides, there are different levels and study plans, making more difficult to structure the contents to teach in each term and degree. In this paper we present a plan for teaching Software Engineering trying to overcome some of the difficulties above.

Physics and Mathematics in the Engineering Curriculum: Correlation with Applied Subjects

This paper presents a study in which the relationship between basic subjects (Mathematics and Physics) and applied engineering subjects (related to Machinery, Electrical Engineering, Topography and Buildings) in higher engineering education curricula is evaluated. The analysis has been conducted using the academic records of 206 students for five years. Furthermore, 34 surveys and personal interviews were conducted to analyze the connections between the contents taught in each subject and to identify student perceptions of the correlation with other subjects or disciplines. At the same time, the content of the different subjects have been analyzed to verify the relationship among the disciplines.Aproper coordination among subjects will allow students to relate and interconnect topics of different subjects, even with the ones learnt in previous courses, while also helping to reduce dropout rates and student failures in successfully accomplishing the different courses.

Assessing Creativity In Engineering Students: A Comparative Between Degrees and Sudents In First And Last Year

An online open access test (CREAX self-assessment) has been used in this work so that students from degrees in engineering in the Universidad Polite¿cnica of Madrid (UPM) could self-assess their creative competence after several classroom activities. Different groups from the first year course have been statistically compared using data from their assessment. These first year students had different professors in the subject ?Technical Drawing? and belonged to several degrees in the UPM. They were as well compared regarding sex and a group of first year students was also compared to another last year group of the degree so as to observe possible differences in the achievement of this competence. Only one difference was detected concerning sex in one of the degrees. Among degrees, the higher marks obtained by students who had done specific exercises for the development of creativity in class is highlighted. Finally, a significantly high mark was observed in students during their last year of degree with respect to first year students. The tool CREAX has become very useful in the assessment of this competence in the UPM degrees in which it has been implemented.

Peer Assessment and Self-assessment: Effective Learning Tools in Higher Education.

When used appropriately, self- and peer-assessment are very effective learning tools. In the present work, instructor formative assessment and feedback, self-assessment (SA), and peer-assessment (PA) have been compared. During the first part of a semester, the students followed a continuous formative assessment. Subsequently, they were divided into two subgroups based on similar performances. One subgroup performed SAs, and the other followedPAduring the last part of the course. The performances of the two groups in solving problems were compared. Results suggest that PA is a more effective learning tool than SA, and both are more effective than instructor formative assessment. However, a survey that was conducted at the end of the experiment showed higher student confidence in instructor assessment than in PA. The students recognized the usefulness of acting as peer assessors, but believed that SA helped them more than PA.

Improving engineering students' communication competence: designing innovative learning strategies

This research presents an innovative and formal educational initiative that is aimed at enhancing the development of engineering students’ specific competencies when studying Engineering Project Management subject. The framework of the experience combines theoretical concepts, the development of a real-case project carried out by multidisciplinary groups of three different universities, the use of software web 2.0 tools, and group and individual assignments of students that play different roles (project managers and team members). Under this scenario, this paper focuses on monitoring the communication competence in the ever growing Project Management virtual environment. Factors such as corporal language, technical means, stage, and management specific vocabulary among others have been considered in order to assess the students’ performance on this issue. As a main contribution, the paper introduces an ad-hoc rubric that, based on previous investigations, has been adapted and tested to this specific context. Additionally, the research conducted has provided some interesting findings that suggest further actions to improve and better define future rubrics, oriented to communication or even other competencies. As specific Project Management subject concerns, it has been detected that students playing the role of Project Managers strengthen their competencies more than those ones that play the role of Team Members. It has also been detected that students have more difficulty assimilating concepts related to risk and quality management. However those concepts related with areas of knowledge like scope, time or cost have been better assimilated by the students.

Do Classes in Cooperative Classrooms Have a Positive Influence on Creativity and Teamwork Skills for Engineering Students?

Contributing to the acquisition of professional creativity and teamwork skills has been a special challenge for some of the subjects taught at the Technical University of Madrid (UPM), and this has been a starting point for the work described in this paper. Some professors have intuited that the use of cooperative classrooms could facilitate the acquisition of these skills. We describe the new methodologies applied within cooperative classrooms by some professors, and present the procedure for measuring students’ perception of their own learning outcomes, skill improvements, and overall satisfaction with the use of this kind of classroom. For this project, 250 students enrolled in several subjects answered a questionnaire. The featuresof thesubjectsinvolved intheproject arewidely disparate. We present the results of the statistical analysis with special emphasis on creativity and teamwork skills, and we conclude that the use of cooperative classroom has a positive influence on the acquisition of these skills. This work has the added value of being the first analysis of student perception of the use of cooperative classroom in the acquisition of creativity and teamwork skills.