907 resultados para Distributed network protocol
Resumo:
BACKGROUND: Classical disease phenotypes are mainly based on descriptions of symptoms and the hypothesis that a given pattern of symptoms provides a diagnosis. With refined technologies there is growing evidence that disease expression in patients is much more diverse and subtypes need to be defined to allow a better targeted treatment. One of the aims of the Mechanisms of the Development of Allergy Project (MeDALL,FP7) is to re-define the classical phenotypes of IgE-associated allergic diseases from birth to adolescence, by consensus among experts using a systematic review of the literature and identify possible gaps in research for new disease markers. This paper describes the methods to be used for the systematic review of the classical IgE-associated phenotypes applicable in general to other systematic reviews also addressing phenotype definitions based on evidence. METHODS/DESIGN: Eligible papers were identified by PubMed search (complete database through April 2011). This search yielded 12,043 citations. The review includes intervention studies (randomized and clinical controlled trials) and observational studies (cohort studies including birth cohorts, case-control studies) as well as case series. Systematic and non-systematic reviews, guidelines, position papers and editorials are not excluded but dealt with separately. Two independent reviewers in parallel conducted consecutive title and abstract filtering scans. For publications where title and abstract fulfilled the inclusion criteria the full text was assessed. In the final step, two independent reviewers abstracted data using a pre-designed data extraction form with disagreements resolved by discussion among investigators. DISCUSSION: The systematic review protocol described here allows to generate broad,multi-phenotype reviews and consensus phenotype definitions. The in-depth analysis of the existing literature on the classification of IgE-associated allergic diseases through such a systematic review will 1) provide relevant information on the current epidemiologic definitions of allergic diseases, 2) address heterogeneity and interrelationships and 3) identify gaps in knowledge.
Resumo:
The past few decades have seen a considerable increase in the number of parallel and distributed systems. With the development of more complex applications, the need for more powerful systems has emerged and various parallel and distributed environments have been designed and implemented. Each of the environments, including hardware and software, has unique strengths and weaknesses. There is no single parallel environment that can be identified as the best environment for all applications with respect to hardware and software properties. The main goal of this thesis is to provide a novel way of performing data-parallel computation in parallel and distributed environments by utilizing the best characteristics of difference aspects of parallel computing. For the purpose of this thesis, three aspects of parallel computing were identified and studied. First, three parallel environments (shared memory, distributed memory, and a network of workstations) are evaluated to quantify theirsuitability for different parallel applications. Due to the parallel and distributed nature of the environments, networks connecting the processors in these environments were investigated with respect to their performance characteristics. Second, scheduling algorithms are studied in order to make them more efficient and effective. A concept of application-specific information scheduling is introduced. The application- specific information is data about the workload extractedfrom an application, which is provided to a scheduling algorithm. Three scheduling algorithms are enhanced to utilize the application-specific information to further refine their scheduling properties. A more accurate description of the workload is especially important in cases where the workunits are heterogeneous and the parallel environment is heterogeneous and/or non-dedicated. The results obtained show that the additional information regarding the workload has a positive impact on the performance of applications. Third, a programming paradigm for networks of symmetric multiprocessor (SMP) workstations is introduced. The MPIT programming paradigm incorporates the Message Passing Interface (MPI) with threads to provide a methodology to write parallel applications that efficiently utilize the available resources and minimize the overhead. The MPIT allows for communication and computation to overlap by deploying a dedicated thread for communication. Furthermore, the programming paradigm implements an application-specific scheduling algorithm. The scheduling algorithm is executed by the communication thread. Thus, the scheduling does not affect the execution of the parallel application. Performance results achieved from the MPIT show that considerable improvements over conventional MPI applications are achieved.
Resumo:
Technological development brings more and more complex systems to the consumer markets. The time required for bringing a new product to market is crucial for the competitive edge of a company. Simulation is used as a tool to model these products and their operation before actual live systems are built. The complexity of these systems can easily require large amounts of memory and computing power. Distributed simulation can be used to meet these demands. Distributed simulation has its problems. Diworse, a distributed simulation environment, was used in this study to analyze the different factors that affect the time required for the simulation of a system. Examples of these factors are the simulation algorithm, communication protocols, partitioning of the problem, distributionof the problem, capabilities of the computing and communications equipment and the external load. Offices offer vast amounts of unused capabilities in the formof idle workstations. The use of this computing power for distributed simulation requires the simulation to adapt to a changing load situation. This requires all or part of the simulation work to be removed from a workstation when the owner wishes to use the workstation again. If load balancing is not performed, the simulation suffers from the workstation's reduced performance, which also hampers the owner's work. Operation of load balancing in Diworse is studied and it is shown to perform better than no load balancing, as well as which different approaches for load balancing are discussed.
Resumo:
The control of the right application of medical protocols is a key issue in hospital environments. For the automated monitoring of medical protocols, we need a domain-independent language for their representation and a fully, or semi, autonomous system that understands the protocols and supervises their application. In this paper we describe a specification language and a multi-agent system architecture for monitoring medical protocols. We model medical services in hospital environments as specialized domain agents and interpret a medical protocol as a negotiation process between agents. A medical service can be involved in multiple medical protocols, and so specialized domain agents are independent of negotiation processes and autonomous system agents perform monitoring tasks. We present the detailed architecture of the system agents and of an important domain agent, the database broker agent, that is responsible of obtaining relevant information about the clinical history of patients. We also describe how we tackle the problems of privacy, integrity and authentication during the process of exchanging information between agents.
Resumo:
Tässä diplomityössä perehdytään verkkoelementiltä, joka yhdistää H.323, MEGACO- ja ISUP-protokollia käyttävät tietoliikenneverkot toisiinsa, vaadittaviin ominaisuuksiin ja toiminnallisuuksiin. Tyypillisesti tällaista toiminnallisuutta tarvitaan IP- ja PSTN-verkkojen yhdistämisessä. Tarkastelu aloitetaan kuvaamalla PSTN-verkon signalointi ja rakenne, jatketaan kuvaamalla internet-protokollia käyttävä verkkoympäristö ja lopuksi perehdytään verkkoelementiltä vaadittaviin toiminnallisuuksiin, jotta PSTN ja MEGACO-pohjaiset verkot toimivat yhteen. Työn käytännöllisenä osuutena kuvataan osa viestisekvenssikaavioista, joita verkkoelementti toteuttaa puuttumatta kuitenkaan eri protokollien toimintaan viestien parametrien tasolla.
Resumo:
Behavioral consequences of a brain insult represent an interaction between the injury and the capacity of the rest of the brain to adapt to it. We provide experimental support for the notion that genetic factors play a critical role in such adaptation. We induced a controlled brain disruption using repetitive transcranial magnetic stimulation (rTMS) and show that APOE status determines its impact on distributed brain networks as assessed by functional MRI (fMRI).Twenty non-demented elders exhibiting mild memory dysfunction underwent two fMRI studies during face-name encoding tasks (before and after rTMS). Baseline task performance was associated with activation of a network of brain regions in prefrontal, parietal, medial temporal and visual associative areas. APOE ε4 bearers exhibited this pattern in two separate independent components, whereas ε4-non carriers presented a single partially overlapping network. Following rTMS all subjects showed slight ameliorations in memory performance, regardless of APOE status. However, after rTMS APOE ε4-carriers showed significant changes in brain network activation, expressing strikingly similar spatial configuration as the one observed in the non-carrier group prior to stimulation. Similarly, activity in areas of the default-mode network (DMN) was found in a single component among the ε4-non bearers, whereas among carriers it appeared disaggregated in three distinct spatiotemporal components that changed to an integrated single component after rTMS. Our findings demonstrate that genetic background play a fundamental role in the brain responses to focal insults, conditioning expression of distinct brain networks to sustain similar cognitive performance.
Resumo:
Tässä diplomityössä on oletettu että neljännen sukupolven mobiiliverkko on saumaton yhdistelmä olemassa olevia toisen ja kolmannen sukupolven langattomia verkkoja sekä lyhyen kantaman WLAN- ja Bluetooth-radiotekniikoita. Näiden tekniikoiden on myös oletettu olevan niin yhteensopivia ettei käyttäjä havaitse saanti verkon muuttumista. Työ esittelee neljännen sukupolven mobiiliverkkoihin liittyvien tärkeimpien langattomien tekniikoiden arkkitehtuurin ja perustoiminta-periaatteet. Työ kuvaa eri tekniikoita ja käytäntöjä tiedon mittaamiseen ja keräämiseen. Saatuja transaktiomittauksia voidaan käyttää tarjottaessa erilaistettuja palvelutasoja sekä verkko- ja palvelukapasiteetin optimoimisessa. Lisäksi työssä esitellään Internet Business Information Manager joka on ohjelmistokehys hajautetun tiedon keräämiseen. Sen keräämää mittaustietoa voidaan käyttää palvelun tason seurannassa j a raportoinnissa sekä laskutuksessa. Työn käytännön osuudessa piti kehittää langattoman verkon liikennettä seuraava agentti joka tarkkailisi palvelun laatua. Agentti sijaitsisi matkapuhelimessa mitaten verkon liikennettä. Agenttia ei kuitenkaan voitu toteuttaa koska ohjelmistoympäristö todettiin vajaaksi. Joka tapauksessa työ osoitti että käyttäjän näkökulmasta tietoa kerääville agenteille on todellinen tarve.
Resumo:
The networking and digitalization of audio equipment has created a need for control protocols. These protocols offer new services to customers and ensure that the equipment operates correctly. The control protocols used in the computer networks are not directly applicable since embedded systems have resource and cost limitations. In this master's thesis the design and implementation of new loudspeaker control network protocols are presented. The protocol stack was required to be reliable, have short response times, configure the network automatically and support the dynamic addition and removal of loudspeakers. The implemented protocol stack was also required to be as efficient and lightweight as possible because the network nodes are fairly simple and lack processing power. The protocol stack was thoroughly tested, validated and verified. The protocols were formally described using LOTOS (Language of Temporal Ordering Specifications) and verified using reachability analysis. A prototype of the loudspeaker network was built and used for testing the operation and the performance of the control protocols. The implemented control protocol stack met the design specifications and proved to be highly reliable and efficient.
Resumo:
UMTS (Universal Mobile Telecommunication System), esimerkkinä kolmannen sukupolven matkapuhelinjärjestelmästä pyrkii toistamaan GSM:n (Global System for Mobile Communications) menestyksen. UMTS:n kaupallinen toiminta on parhaillaan alkamassa ja ensimmäinen kaupallinen verkko on jo aloittanut toimintansa Japanissa. Tämä diplomityö antaa yleiskuvan UMTS:stä keskittyen radioverkkojärjestelmän (UMTS Terrestrial Radio Access Network,UTRAN) radioresurssien hallintaan (Radio Resource Management, RRM). Työssä kuvataan radiorajapintojen toimintaa, mutta diplomityön pääaiheena on kuitenkin radioresurssien hallinta UMTS radioaliverkkojärjestelmien ylitse. Radioresurssien hallinta pitää sisällään joukon proseduureja, jotka vaikuttavat koko UTRAN:in rakenteen lävitse. On hyvin tärkeää saavuttaa oikea toiminnallisuus hajautettujen radioresurssien hallintaan jotta voitaisiin saavuttaa paras yhteyden laatu loppukäyttäjälle. Työssä käydään yksityiskohtaisesti lävitse radioresurssien hallinnan perusperiaatteet ja joukko proseduureja. RNSAP (Radio Network Subsystem Application Part) protokollaa tarkastellaan työssä esimerkkinä protokollasta joka osallistuu radioresurssien hallintaprosessiin.
Resumo:
Tällä hetkellä haastavin telekommunikaatioteollisuuden tutkimus – ja kehitystoiminta on keskittynyt kolmannen sukupolven matkapuhelinjärjestelmien ympärille. Järjestelmien standardointityössä on saatu aikaiseksi ensimmäiset vakaat spesifikaatioversiot ja kaupallista toimintaa ollaan parhaillaan aloittelemassa Japanissa ja Euroopassa. Eräs kolmannen sukupolven järjestelmistä on UMTS (Universal Mobile Telecommunications System). Tämä diplomityö antaa yleiskuvan UMTS järjestelmästä ja sen eri verkkoelementtien toiminnallisuuksista. Päähuomio on kiinnitetty radioverkkojärjestelmään (UMTS Terrestrial Radio Access Network) ja erityisesti sen radioaliverkkojärjestelmään (Radio Network Subsystem), joka koostuu radioverkonohjaimesta (Radio Network Controller) ja joukosta siihen kuuluvia tukiasemia (Node B). Radioverkonohjain ja tukiasemat on yhdistetty avoimen rajapinnan kautta jota kutsutaan Iub -rajapinnaksi. Rajapinta tarjoaa radioverkonohjaimelle mahdollisuuden kontrolloida tukiasemia signalointiviestien avulla ja mahdollistaa tehokkaan ja luotettavan käyttäjätiedon siirron radioaliverkkojärjestelmän sisällä. Tämän diplomityön pääasiallinen sisältö on siirtoresurssien hallinta Iub -rajapinnan ylitse. Työssä esitellään ja selitetään siirtoverkon arkkitehtuuri. Myös kaikki Iub:ssä sijaitsevat protokollat ja toiminnalliset yksiköt jotka vaikuttavat siirtoresurssien hallintaan esitellään ja kuvataan yksityiskohtaisesti. Päähuomio on kiinnitetty sovellusprotokolliin sekä rajapinnan siirtoverkko- että radioverkkokerroksella sekä näiden protokollien väliseen vuorovaikutukseen. Kyseiset protokollat ovat Node B Application Part (NBAP) ja Access Link Control Application Part (ALCAP). Työn toteutusosassa käydään lävitse NBAP –protokollan prototyypin ja Node B Manager –toiminnallisen yksikön prototyypin implementaatio.
Resumo:
Tulevaisuudessa siirrettävät laitteet, kuten matkapuhelimet ja kämmenmikrot, pystyvät muodostamaan verkkoyhteyden käyttäen erilaisia yhteysmenetelmiä eri tilanteissa. Yhteysmenetelmillä on toisistaan poikkeavat viestintäominaisuudet mm. latenssin, kaistanleveyden, virhemäärän yms. suhteen. Langattomille yhteysmenetelmille on myös ominaista tietoliikenneyhteyden ominaisuuksien voimakas muuttuminen ympäristön suhteen. Parhaan suorituskyvyn ja käytettävyyden saavuttamiseksi, on siirrettävän laitteen pystyttävä mukautumaan käytettyyn viestintämenetelmään ja viestintäympäristössä tapahtuviin muutoksiin. Olennainen osa tietoliikenteessä ovat protokollapinot, jotka mahdollistavat tietoliikenneyhteyden järjestelmien välillä tarjoten verkkopalveluita päätelaitteen käyttäjäsovelluksille. Jotta protokollapinot pystyisivät mukautumaan tietyn viestintäympäristön ominaisuuksiin, on protokollapinon käyttäytymistä pystyttävä muuttamaan ajonaikaisesti. Perinteisesti protokollapinot ovat kuitenkin rakennettu muuttumattomiksi niin, että mukautuminen tässä laajuudessa on erittäin vaikeaa toteuttaa, ellei jopa mahdotonta. Tämä diplomityö käsittelee mukautuvien protokollapinojen rakentamista käyttäen komponenttipohjaista ohjelmistokehystä joka mahdollistaa protokollapinojen ajonaikaisen muuttamisen. Toteuttamalla esimerkkijärjestelmän, ja mittaamalla sen suorituskykyä vaihtelevassa tietoliikenneympäristössä, osoitamme, että mukautuvat protokollapinot ovat mahdollisia rakentaa ja ne tarjoavat merkittäviä etuja erityisesti tulevaisuuden siirrettävissä laitteissa.
Resumo:
The thesis presents an overview of third generation of IP telephony. The architecture of 3G IP Telephony and its components are described. The main goal of the thesis is to investigate the interface between the Call Processing Server and Multimedia IP Networks. The interface functionality, proposed protocol stack and a general description are presented in the thesis. To provide useful services, 3G IP Telephony requires a set of control protocols for connection establishment, capabilities exchange and conference control. The Session Initiation Protocol (SIP) and the H.323 are two protocols that meet these needs. In the thesis these two protocols are investigated and compared in terms of Complexity, Extensibility, Scalability, Services, Resource Utilization and Management.
Resumo:
Neljännen sukupolven mobiiliverkot kokoaa kaikki tietoliikenneverkot ja palvelut Internetin ympärille. Tämä mullistus muuttaa vanhat vertikaaliset tietoliikenneverkot joissa yhden tietoliikenneverkon palvelut ovat saatavissa vain kyseisen verkon päätelaitteille horisontaaliseksi malliksi jossa päätelaitteet käyttävät omaa verkkoansa pääsynä Internetin palveluihin. Tämä diplomityö esittelee idean paikallisista palveluista neljännen sukupolven mobiiliverkossa. Neljännen sukupolven mobiiliverkko yhdistää perinteiset televerkkojen palvelut ja Internet palvelut sekä mahdollistaa uuden tyyppisten palveluiden luonnin. TCP/IP protokollien ja Internetin evoluutio on esitelty. Laajakaistaiset, lyhyen kantaman radiotekniikat joita käytetään langattomana yhteytenä Internetiin on käsitelty. Evoluutio kohti neljännen sukupolven mobiiliverkkoja on kuvattu esittelemällä vanhat, nykyiset ja tulevat mobiiliverkot sekä niiden palvelut. Ennustukset palveluiden ja markkinoiden tulevaisuuden kehityksestä on käsitelty. Neljännen sukupolven mobiiliverkon arkkitehtuuri mahdollistaa paikalliset palvelut jotka ovat saatavilla vain yhdessä paikallisessa 4G verkossa. Paikalliset palvelut voidaan muunnella jokaiselle käyttäjälle erikseen käyttäen profiili-informaatiota ja paikkatietoa. Työssä on pohdittu paikallisten palveluiden käyttökelpoisuutta ja mahdollisuuksia käyttäen Lappeenrannan teknillisen korkeakoulun 4G projektin palvelupilotin tuloksia.
Resumo:
The performance of a hydrologic model depends on the rainfall input data, both spatially and temporally. As the spatial distribution of rainfall exerts a great influence on both runoff volumes and peak flows, the use of a distributed hydrologic model can improve the results in the case of convective rainfall in a basin where the storm area is smaller than the basin area. The aim of this study was to perform a sensitivity analysis of the rainfall time resolution on the results of a distributed hydrologic model in a flash-flood prone basin. Within such a catchment, floods are produced by heavy rainfall events with a large convective component. A second objective of the current paper is the proposal of a methodology that improves the radar rainfall estimation at a higher spatial and temporal resolution. Composite radar data from a network of three C-band radars with 6-min temporal and 2 × 2 km2 spatial resolution were used to feed the RIBS distributed hydrological model. A modification of the Window Probability Matching Method (gauge-adjustment method) was applied to four cases of heavy rainfall to improve the observed rainfall sub-estimation by computing new Z/R relationships for both convective and stratiform reflectivities. An advection correction technique based on the cross-correlation between two consecutive images was introduced to obtain several time resolutions from 1 min to 30 min. The RIBS hydrologic model was calibrated using a probabilistic approach based on a multiobjective methodology for each time resolution. A sensitivity analysis of rainfall time resolution was conducted to find the resolution that best represents the hydrological basin behaviour.
Resumo:
Nykypäivän maailma tukeutuu verkkoihin. Tietokoneverkot ja langattomat puhelimet ovat jo varsin tavallisia suurelle joukolle ihmisiä. Uusi verkkotyyppi on ilmestynyt edelleen helpottamaan ihmisten verkottunutta elämää. Ad hoc –verkot mahdollistavat joustavan verkonmuodostuksen langattomien päätelaitteiden välille ilman olemassa olevaa infrastruktuuria. Diplomityö esittelee uuden simulaatiotyökalun langattomien ad hoc –verkkojen simulointiin protokollatasolla. Se esittelee myös kyseisten verkkojen taustalla olevat periaatteet ja teoriat. Lähemmin tutkitaan OSI-mallin linkkikerroksen kaistanjakoprotokollia ad hoc –verkoissa sekä vastaavan toteutusta simulaattorissa. Lisäksi esitellään joukko simulaatioajoja esimerkiksi simulaattorin toiminnasta ja mahdollisista käyttökohteista.