A Computer Based Information System for County Equipment Cost Records, Interim Report, HR-173, 1975

This report describes the work accomplished to date on research project HR-173, A Computer Based Information System for County Equipment Cost Records, and presents the initial design for this system. The specific topics discussed here are findings from the analysis of information needs, the system specifications developed from these findings, and the proposed system design based upon the system specifications. The initial system design will include tentative input designs for capturing input data, output designs to show the output formats and the items to be output for use in decision making, file design showing the organization of information to be kept on each piece of equipment in the computer data file, and general system design explaining how the entire system will operate. The Steering Committee appointed by Iowa Highway Research Board is asked to study this report, make appropriate suggestions, and give approval to the proposed design subject to any suggestions made. This approval will permit the designer to proceed promptly with the development of the computer program implementation phase of the design.

Pavement Thickness Design for Local Roads in Iowa, TR-586, 2010

Three pavement design software packages were compared with regards to how they were different in determining design input parameters and their influences on the pavement thickness. StreetPave designs the concrete pavement thickness based on the PCA method and the equivalent asphalt pavement thickness. The WinPAS software performs both concrete and asphalt pavements following the AASHTO 1993 design method. The APAI software designs asphalt pavements based on pre-mechanistic/empirical AASHTO methodology. First, the following four critical design input parameters were identified: traffic, subgrade strength, reliability, and design life. The sensitivity analysis of these four design input parameters were performed using three pavement design software packages to identify which input parameters require the most attention during pavement design. Based on the current pavement design procedures and sensitivity analysis results, a prototype pavement design and sensitivity analysis (PD&SA) software package was developed to retrieve the pavement thickness design value for a given condition and allow a user to perform a pavement design sensitivity analysis. The prototype PD&SA software is a computer program that stores pavement design results in database that is designed for the user to input design data from the variety of design programs and query design results for given conditions. The prototype Pavement Design and Sensitivity Analysis (PA&SA) software package was developed to demonstrate the concept of retrieving the pavement design results from the database for a design sensitivity analysis. This final report does not include the prototype software which will be validated and tested during the next phase.

Oscillations, phase-of-firing coding, and spike timing-dependent plasticity: an efficient learning scheme

Recent experiments have established that information can be encoded in the spike times of neurons relative to the phase of a background oscillation in the local field potential—a phenomenon referred to as “phase-of-firing coding” (PoFC). These firing phase preferences could result from combining an oscillation in the input current with a stimulus-dependent static component that would produce the variations in preferred phase, but it remains unclear whether these phases are an epiphenomenon or really affect neuronal interactions—only then could they have a functional role. Here we show that PoFC has a major impact on downstream learning and decoding with the now well established spike timing-dependent plasticity (STDP). To be precise, we demonstrate with simulations how a single neuron equipped with STDP robustly detects a pattern of input currents automatically encoded in the phases of a subset of its afferents, and repeating at random intervals. Remarkably, learning is possible even when only a small fraction of the afferents (~10%) exhibits PoFC. The ability of STDP to detect repeating patterns had been noted before in continuous activity, but it turns out that oscillations greatly facilitate learning. A benchmark with more conventional rate-based codes demonstrates the superiority of oscillations and PoFC for both STDP-based learning and the speed of decoding: the oscillation partially formats the input spike times, so that they mainly depend on the current input currents, and can be efficiently learned by STDP and then recognized in just one oscillation cycle. This suggests a major functional role for oscillatory brain activity that has been widely reported experimentally.

Marketing education, distance learning and hypermedia : teaching 'current issues in marketing' in a virtual campus

This article reports on a project at the Universitat Oberta de Catalunya (UOC: The Open University of Catalonia, Barcelona) to develop an innovative package of hypermedia-based learning materials for a new course entitled 'Current Issues in Marketing'. The UOC is a distance university entirely based on a virtual campus. The learning materials project was undertaken in order to benefit from the advantages which new communication technologies offer to the teaching of marketing in distance education. The article reviews the main issues involved in incorporating new technologies in learning materials, the development of the learning materials, and their functioning within the hypermedia based virtual campus of the UOC. An empirical study is then carried out in order to evaluate the attitudes of students to the project. Finally, suggestions for improving similar projects in the future are put forward.

Improving Searching and Browsing Capabilities of Learning Object Repositories

Learning object repositories are a basic piece of virtual learning environments used for content management. Nevertheless, learning objects have special characteristics that make traditional solutions for content management ine ective. In particular, browsing and searching for learning objects cannot be based on the typical authoritative meta-data used for describing content, such as author, title or publicationdate, among others. We propose to build a social layer on top of a learning object repository, providing nal users with additional services fordescribing, rating and curating learning objects from a teaching perspective. All these interactions among users, services and resources can be captured and further analyzed, so both browsing and searching can be personalized according to user pro le and the educational context, helping users to nd the most valuable resources for their learning process. In this paper we propose to use reputation schemes and collaborative filtering techniques for improving the user interface of a DSpace based learning object repository.

A conceptual model for grid learning services automatic composition

Peer-reviewed

Parallella, dynamiska representationer i gymnasiefysiken : implementering av ett interaktivt datorverktyg i didaktiska situationer och uppfattning av effektivt lärande

The computer is a useful tool in the teaching of upper secondary school physics, and should not have a subordinate role in students' learning process. However, computers and computer-based tools are often not available when they could serve their purpose best in the ongoing teaching. Another problem is the fact that commercially available tools are not usable in the way the teacher wants. The aim of this thesis was to try out a novel teaching scenario in a complicated subject in physics, electrodynamics. The didactic engineering of the thesis consisted of developing a computer-based simulation and training material, implementing the tool in physics teaching and investigating its effectiveness in the learning process. The design-based research method, didactic engineering (Artigue, 1994), which is based on the theoryof didactical situations (Brousseau, 1997), was used as a frame of reference for the design of this type of teaching product. In designing the simulation tool a general spreadsheet program was used. The design was based on parallel, dynamic representations of the physics behind the function of an AC series circuit in both graphical and numerical form. The tool, which was furnished with possibilities to control the representations in an interactive way, was hypothesized to activate the students and promote the effectiveness of their learning. An effect variable was constructed in order to measure the students' and teachers' conceptions of learning effectiveness. The empirical study was twofold. Twelve physics students, who attended a course in electrodynamics in an upper secondary school, participated in a class experiment with the computer-based tool implemented in three modes of didactical situations: practice, concept introduction and assessment. The main goal of the didactical situations was to have students solve problems and study the function of AC series circuits, taking responsibility for theirown learning process. In the teacher study eighteen Swedish speaking physics teachers evaluated the didactic potential of the computer-based tool and the accompanying paper-based material without using them in their physics teaching. Quantitative and qualitative data were collected using questionnaires, observations and interviews. The result of the studies showed that both the group of students and the teachers had generally positive conceptions of learning effectiveness. The students' conceptions were more positive in the practice situation than in the concept introduction situation, a setting that was more explorative. However, it turned out that the students' conceptions were also positive in the more complex assessment situation. This had not been hypothesized. A deeper analysis of data from observations and interviews showed that one of the students in each pair was more active than the other, taking more initiative and more responsibilityfor the student-student and student-computer interaction. These active studentshad strong, positive conceptions of learning effectiveness in each of the threedidactical situations. The group of less active students had a weak but positive conception in the first iv two situations, but a negative conception in the assessment situation, thus corroborating the hypothesis ad hoc. The teacher study revealed that computers were seldom used in physics teaching and that computer programs were in short supply. The use of a computer was considered time-consuming. As long as physics teaching with computer-based tools has to take place in special computer rooms, the use of such tools will remain limited. The affordance is enhanced when the physical dimensions as well as the performance of the computer are optimised. As a consequence, the computer then becomes a real learning tool for each pair of students, smoothly integrated into the ongoing teaching in the same space where teaching normally takes place. With more interactive support from the teacher, the computer-based parallel, dynamic representations will be efficient in promoting the learning process of the students with focus on qualitative reasoning - an often neglected part of the learning process of the students in upper secondary school physics.

Towards adoption of eLearning technologies at Lappeenranta University of Technology: Understanding Teachers‟ Adoption of Blackboard Learning System

The electronic learning has become crucial in higher education with increased usage of learning management systems as a key source of integration on distance learning. The objective of this study is to understand how university teachers are influenced to use and adopt web-based learning management systems. Blackboard, as one of the systems used internationally by various universities is applied as a case. Semi-structured interviews were made with professors and lecturers who are using Blackboard at Lappeenranta University of Technology. The data collected were categorized under constructs adapted from Unified Theory of Acceptance and Use of Technology (UTAUT) and interpretation and discussion were based on reviewed literature. The findings suggest that adoption of learning management systems by LUT teachers is highly influenced by perceived usefulness, facilitating conditions and gained experience. The findings also suggest that easiness of using the system and social influence appear as medium influence of adoption for teachers at LUT.

Tutkivan oppimisen ja ongelmalähtöisen oppimisen hyödyntäminen tuotantotalouden opetuksessa

Työn tavoitteena on esittää erilaisia mahdollisuuksia tutkivan oppimisen hyödyntämiseen tuotantotalouden koulutusohjelmassa. Työssä esitetään näiden opetusfilosofioiden perusperiaatteet. Lisäksi tutkitaan tutkivan oppimisen tuottamia hyötyjä koulutusohjelmalle, opiskelijoille ja tuleville työnantajille. Mukaan on otettu muissa yliopistossa hyödynnettyjä tapoja, mutta myös kehitetty erityisesti tuotantotalouden erityispiirteet huomioivia sovellettuja menetelmiä. Lisäksi tarkastellaan tuotantotalouden koulutusohjelmassa tuotettua ongelmalähtöiseen opiskeluun perustuvaa kurssia ”Toimitusketjun johtamisen teoriatyöpaja”. Työssä esitetään myös suunnitelma uusimuotoiselle, tutkivaan oppimiseen nojautuvalle ”Kandidaatintyö- ja seminaari” –kurssille. Kirjallisuuskatsauksessa perehdytään oppimisen ja muistin toiminnan perusteisiin. Tämän jälkeen esitellään näille periaatteille rakentuneiden tutkivan oppimisen ja ongelmalähtöisen oppimisen lähestymistavat ja menetelmät opetuksessa. Teorian pohjalta esitetään konkreettisia ideoita tutkivan oppimisen hyödyntämiseen opetuksessa. Tutkimuksen kahdesta case –tapauksesta ensimmäisessä esitetään, miten opiskelijat kokevat ongelmiin perustuvalla kurssilla opiskelun. Toinen case esittää, kuinka uusimuotoinen Kandidaatintyö- ja seminaari –kurssi on luotu ja miten se tukee taitoja, joita he tulevat tarvitsemaan myöhemmissä opinnoissaan ja työelämässä.

Socially Competent Leadership - predictors, impacts and skilling in engineering

Earlier management studies have found a relationship between managerial qualities and subordinate impacts, but the effect of managers‘ social competence on leader perceptions has not been solidly established. To fill the related research gap, the present work embarks on a quantitative empirical effort to identify predictors of successful leadership. In particular, this study investigates relationships between perceived leader behavior and three selfreport instruments used to measure managerial capability: 1) the WOPI Work Personality Inventory, 2) Raven‘s general intelligence scale, and 3) the Emotive Communication Scale (ECS). This work complements previous research by resorting to both self-reports and other-reports: the results acquired from the managerial sample are compared to subordinate perceptions as measured through the ECS other-report and the WOPI360 multi-source appraisal. The quantitative research is comprised of a sample of 8o superiors and 354 subordinates operating in eight Finnish organizations. The strongest predictive value emerged from the ECS self- and other-reports and certain personality dimensions. In contrast, supervisors‘ logical intelligence did not correlate with leadership perceived as socially competent by subordinates. 16 of the superiors rated as most socially competent by their subordinates were selected for case analysis. Their qualitative narratives evidence the role of life history and post-traumatic growth in developing managerial skills. The results contribute to leadership theory in four ways. First, the ECS self-report devised for this research offers a reliable scale for predicting socially competent leader ability. Second, the work identifies dimensions of personality and emotive skills that can be considered predictors of managerial ability and benefited from in leader recruitment and career planning. Third, the Emotive Communication Model delineated on the basis of the empirical data allows for a systematic design and planning of communication and leadership education. Fourth, this workfurthers understanding of personal growth strategies and the role of life history in leader development and training. Finally, this research advances educational leadership by conceptualizing and operationalizing effective managerial communications. The Emotive Communication Model devised directs the pedagogic attention in engineering to assertion, emotional availability and inspiration skills. The proposed methodology addresses classroom management strategies drawing from problem-based learning, student empowerment, collaborative learning, and so-called socially competent teachership founded on teacher immediacy and perceived caring, all constituting strategies moving away from student compliance and teacher modelling. The ultimate educational objective embraces the development of individual engineers and organizational leaders that not only possess traditional analytical and technical expertise and substantive knowledge but are intelligent also creatively, practically, and socially.

A bridge between engineering and language learning : automation and German in an online course

Artikkeli luettavissa osassa: Part 2. - ISBN 9789522163172(PDF). - Liitteenä työpaperi