Single crowns versus conventional fillings for the restoration of root filled teeth

Endodontic treatment, involves removal of the dental pulp and its replacement by a root canal filling. Restoration of root filled teeth can be challenging due to structural differences between vital and non-vital root filled teeth. Direct restoration involves placement of a restorative material e.g. amalgam or composite directly into the tooth. Indirect restorations consist of cast metal or ceramic (porcelain) crowns. The choice of restoration depends on the amount of remaining tooth which may influence long term survival and cost. The comparative in service clinical performance of crowns or conventional fillings used to restore root filled teeth is unclear.

L-mimosine increases the production of vascular endothelial growth factor in human tooth slice organ culture model.

AIM To assess the pro-angiogenic and pro-inflammatory capacity of the dentine-pulp complex in response to the prolyl hydroxylase inhibitor L-mimosine in a tooth slice organ culture model. METHODOLOGY Human teeth were sectioned transversely into 600-μm-thick slices and cultured in medium supplemented with serum and antibiotics. Then, pulps were stimulated for 48 h with L-mimosine. Pulps were subjected to viability measurements based on formazan formation in MTT assays. In addition, histological evaluation of pulps was performed based on haematoxylin and eosin staining. Culture supernatants were subjected to immunoassays for vascular endothelial growth factor (VEGF) to determine the pro-angiogenic capacity and to immunoassays for interleukin (IL)-6 and IL-8 to assess the pro-inflammatory response. Interleukin-1 served as pro-inflammatory control. Echinomycin was used to inhibit hypoxia-inducible factor-1 (HIF-1) alpha activity. Data were analysed using Student's t-test and Mann-Whitney U test. RESULTS Pulps within tooth slices remained vital upon L-mimosine stimulation as indicated by formazan formation and histological evaluation. L-mimosine increased VEGF production when normalized to formazan formation in the pulp tissue of the tooth slices (P < 0.05). This effect on VEGF was reduced by echinomycin (P < 0.01). Changes in normalized IL-6 and IL-8 levels upon treatment with L-mimosine did not reach the level of significance (P > 0.05), whilst treatment with IL-1, which served as positive control, increased IL-6 (P < 0.05) and IL-8 levels (P < 0.05). CONCLUSIONS The prolyl hydroxylase inhibitor L-mimosine increased VEGF production via HIF-1 alpha in the tooth slice organ culture model whilst inducing no prominent increase in IL-6 and IL-8. Pre-clinical studies will reveal if these in vitro effects translate into dental pulp regeneration.

Single crowns versus conventional fillings for the restoration of root-filled teeth.

BACKGROUND Endodontic treatment involves removal of the dental pulp and its replacement by a root canal filling. Restoration of root filled teeth can be challenging due to structural differences between vital and non-vital root-filled teeth. Direct restoration involves placement of a restorative material e.g. amalgam or composite, directly into the tooth. Indirect restorations consist of cast metal or ceramic (porcelain) crowns. The choice of restoration depends on the amount of remaining tooth, and may influence durability and cost. The decision to use a post and core in addition to the crown is clinician driven. The comparative clinical performance of crowns or conventional fillings used to restore root-filled teeth is unknown. This review updates the original, which was published in 2012. OBJECTIVES To assess the effects of restoration of endodontically treated teeth (with or without post and core) by crowns versus conventional filling materials. SEARCH METHODS We searched the following databases: the Cochrane Oral Health Group's Trials Register, CENTRAL, MEDLINE via OVID, EMBASE via OVID, CINAHL via EBSCO, LILACS via BIREME. We also searched the reference lists of articles and ongoing trials registries.There were no restrictions regarding language or date of publication. The search is up-to-date as of 26 March 2015. SELECTION CRITERIA Randomised controlled trials (RCTs) or quasi-randomised controlled trials in participants with permanent teeth that have undergone endodontic treatment. Single full coverage crowns compared with any type of filling materials for direct restoration or indirect partial restorations (e.g. inlays and onlays). Comparisons considered the type of post and core used (cast or prefabricated post), if any. DATA COLLECTION AND ANALYSIS Two review authors independently extracted data from the included trial and assessed its risk of bias. We carried out data analysis using the 'treatment as allocated' patient population, expressing estimates of intervention effect for dichotomous data as risk ratios, with 95% confidence intervals (CI). MAIN RESULTS We included one trial, which was judged to be at high risk of performance, detection and attrition bias. The 117 participants with a root-filled, premolar tooth restored with a carbon fibre post, were randomised to either a full coverage metal-ceramic crown or direct adhesive composite restoration. None experienced a catastrophic failure (i.e. when the restoration cannot be repaired), although only 104 teeth were included in the final, three-year assessment. There was no clear difference between the crown and composite group and the composite only group for non-catastrophic failures of the restoration (1/54 versus 3/53; RR 0.33; 95% CI 0.04 to 3.05) or failures of the post (2/54 versus 1/53; RR 1.96; 95% CI 0.18 to 21.01) at three years. The quality of the evidence for these outcomes is very low. There was no evidence available for any of our secondary outcomes: patient satisfaction and quality of life, incidence or recurrence of caries, periodontal health status, and costs. AUTHORS' CONCLUSIONS There is insufficient evidence to assess the effects of crowns compared to conventional fillings for the restoration of root-filled teeth. Until more evidence becomes available, clinicians should continue to base decisions about how to restore root-filled teeth on their own clinical experience, whilst taking into consideration the individual circumstances and preferences of their patients.

Prevalencia de calcificaciones pulpares en primeros molares en función del género, edad y ubicación

Dentro de la pulpa dental se encuentran diversas formas de calcificaciones, con una frecuencia tal que se puede dudar acerca de si su presencia representa un estado patológico o solamente aspecto de las variaciones biológicas normales. Metodología: Un total de 272 pacientes de ambos sexos y edades conocidas fueron seleccionados teniendo como criterio de inclusión primeros molares sanos. Luego de la inspección clínica se tomaron radiografías bitewing, las cuales fueron analizadas con el software Image Pro Plus 4.5 para identificar calcificaciones pulpares. Los datos fueron analizados mediante Test Student y ANOVA. Resultados: de los 272 pacientes, 119 fueron mujeres y 153 hombres. Un 61,22% de las mujeres y un 52,99% de los hombres presentaron calcificaciones pulpares. Se encontró una asociación significativa entre prevalencia de calcificaciones pulpares y sexo al aumentar la edad, al considerar densidad óptica (p < 0.001) y coeficiente de calcificación (p < 0.005). Los primeros molares superiores mostraron una mayor presencia de calcificaciones (60,42%) con respecto a los molares inferiores (52,75%), con diferencias estadísticamente significativas, analizando densidad óptica (p = 0.001), diferencias de intensidad cámara pulpar - entorno y coeficiente de calcificación (p < 0.001). Conclusiones: La prevalencia de calcificaciones fue mayor al aumentar la edad y significativamente mayor en mujeres y en molares superiores: estos datos aportan información útil para el diagnóstico y la práctica clínica.

Dissolution of porcine incisor pulps in sodium hypochlorite solutions of varying compositions and concentrations

Background: The solubility of dental pulp tissue in sodium hypochlorite has been extensively investigated but results have been inconsistent; due most likely to variations in experimental design, the volume and/or rate of replenishment of the solutions used and the nature of the tissues assessed. Traditionally, the sodium hypochlorite solutions used for endodontic irrigation in Australia have been either Milton or commercial bleach, with Milton being the most common. Recently, a range of Therapeutic Goods Administration (TGA) approved proprietary sodium hypochlorite solutions, which contain surfactant, has become available. Some domestic chlorine bleaches now also contain surfactants. The purpose of this study was to perform new solubility assessments, comparing Milton with new TGA approved products, Hypochlor 1% and Hypochlor 4% forte, and with a domestic bleach containing surfactant (White King). Methods: Ten randomly assigned pulp samples of porcine dental pulp of approximately equal dimensions were immersed in the above solutions, as well as representative concentrations of sodium hydroxide. Time to complete dissolution was measured and assessed statistically. Results: White King 4% showed the shortest dissolution time, closely followed by Hypochlor 4% forte. White King 1% and Hypochlor 1% each took around three times as long to completely dissolve the samples of pulp as their respective 4% concentrations, while Milton took nearly 10 times as long. The sodium hydroxide solutions showed no noticeable dissolution of the pulp samples. Conclusions: The composition and content of sodium hypochlorite solutions had a profound effect on the ability of these solutions to dissolve pulp tissue in vitro. Greater concentrations provided more rapid dissolution of tissue. One per cent solutions with added surfactant and which contained higher concentrations of sodium hydroxide were significantly more effective in dissolution of pulp tissue than Milton.

Stem cells in the periodontal ligament

The ability to identify and manipulate stem cells has been a significant advancement in regenerative medicine and has contributed to the development of tissue engineering-based clinical therapies. Difficulties associated with achieving predictable periodontal regeneration, means that novel techniques such as tissue engineering need to be developed in order to regenerate the extensive soft and hard tissue destruction that results from periodontitis. One of the critical requirements for a tissue engineering approach is the delivery of ex vivo expanded progenitor populations or the mobilization of endogenous progenitor cells capable of proliferating and differentiating into the required tissues. By definition, stem cells fulfill these requirements and the recent identification of stem cells within the periodontal ligament represents a significant development in the progress toward predictable periodontal regeneration. In order to explore the importance of stem cells in periodontal wound healing and regeneration, this review will examine contemporary concepts in stem cell biology, the role of periodontal ligament progenitor cells in the regenerative process, recent developments in identifying periodontal stem cells and the clinical implications of these findings.

Production of Polyhydroxyalkanoates by Pseudomonas mendocina using vegetable oils and their characterisation

Synthesis of Polyhydroxyalkanoates (PHAs) by Pseudomonas mendocina, using different vegetable oils such as, coconut oil, groundnut oil, corn oil and olive oil, as the sole carbon source was investigated for the first time. The PHA yield obtained was compared with that obtained during the production of PHAs using sodium octanoate as the sole carbon source. The fermentation profiles at shaken flask and bioreactor levels revealed that vegetable oils supported the growth of Pseudomonas mendocina and PHA accumulation in this organism. Moreover, when vegetable oil (coconut oil) was used as the sole carbon source, fermentation profiles showed better growth and polymer production as compared to conditions when sodium octanoate was used as the carbon source. In addition, comparison of PHA accumulation at shaken flask and fermenter level confirmed the higher PHA yield at shaken flask level production. The highest cell mass found using sodium octanoate was 1.8 g/L, whereas cell mass as high as 5.1 g/L was observed when coconut oil was used as the feedstock at flask level production. Moreover, the maximum PHA yield of 60.5% dry cell weight (dcw) was achieved at shaken flask level using coconut oil as compared to the PHA yield of 35.1% dcw obtained using sodium octanoate as the sole carbon source. Characterisations of the chemical, physical, mechanical, surface and biocompatibility properties of the polymers produced have been carried out by performing different analyses as described in the second chapter of this study. Chemical analysis using GC and FTIR investigations showed medium chain length (MCL) PHA production in all conditions. GC-MS analysis revealed a unique terpolymer production, containing 3-hydroxyoctanoic acid, 3-hydroxydecanoic acid and 3-hydroxydodecanoic acid when coconut oil, groundnut oil, olive oil, and corn oil were used as the carbon source. Whereas production of the homopolymer containing 3-hydroxyoctanoic acid was observed when sodium octanoate was used as the carbon source. MCL-PHAs produced in this study using sodium octanoate, coconut oil, and olive oil exhibited melting transitions, indicating that each of the PHA was crystalline or semi-crystalline polymer. In contrast, the thermal properties of PHAs produced from groundnut and corn oils showed no melting transition, indicating that they were completely amorphous or semi-crystalline, which was also confirmed by the X-Ray Diffraction (XRD) results obtained in this study. Mechanical analysis of the polymers produced showed higher stiffness of the polymer produced from coconut oil than the polymer from sodium octanoate. Surface characterisation of the polymers using Scanning Electron Microscopy (SEM) revealed a rough surface topography and surface contact angle measurement revealed their hydrophobic nature. Moreover, to investigate the potential applicability of the produced polymers as the scaffold materials for dental pulp regeneration, multipotent human Mesenchymal stem cells (hMSCs) were cultured onto the polymer films. Results indicated that these polymers are not cytotoxic towards the hMSCs and could support their attachment and proliferation. Highest cell growth was observed on the polymer samples produced from corn oil, followed by the polymer produced using coconut oil. In conclusion, this work established, for the first time, that vegetable oils are a good economical source of carbon for production of MCL-PHA copolymers effectively by Pseudomonas mendocina. Moreover, biocompatibility studies suggest that the produced polymers may have potential for dental tissue engineering application.

Uma abordagem sobre infecções endodônticas

As infeções endodônticas envolvem a invasão e multiplicação de microrganismos na polpa dentária e tecidos periapicais sendo responsáveis por dois tipos de patologias: as patologias pulpares e as patologias periapicais. Relativamente às patologias pulpares destacam-se a pulpite reversível, a pulpite irreversível e a necrose pulpar. Quanto às patologias periapicais, destacam-se o abcesso apical agudo, o abcesso apical crónico, a periodontite apical aguda, a periodontite apical crónica, o granuloma perirradicular e o quisto perirradicular. As doenças pulpares e periapicais apresentam manifestações clínicas diferentes que, em conjunto com os sinais e sintomas manifestados pelo paciente permitem diagnosticar o tipo de infeção endodôntica. As infeções endodônticas estão associadas a uma elevada diversidade de bactérias, sendo frequentemente intituladas de infeções endodônticas polimicrobianas. Sabe-se que os microrganismos são a causa principal das doenças pulpares e periapicais e, por esse motivo, o objetivo principal do Tratamento Endodôntico consiste na eliminação dos microrganismos e prevenção da re-infeção. O tratamento das infeções endodônticas baseia-se na preparação químico-mecânica do sistema de canais radiculares – instrumentação e irrigação – seguida da obturação e culminando com a restauração definitiva ou tratamento reabilitador. Este trabalho tem como objetivos adquirir um conhecimento mais amplo relativamente aos tipos de infeções endodônticas, à realização dos diversos diagnósticos e, principalmente, às várias opções de tratamento, disponíveis na área da Endodontia. Para tal foi realizada uma pesquisa bibliográfica baseada em artigos científicos, publicados nas bases de dados PubMed, Scielo e Science Direct bem como em alguns livros relacionados com o tema.

Considerações anatómicas sobre o envelhecimento do aparelho estomatognático

Introdução: com o crescente aumento da expectativa de vida, o conhecimento das alterações anatómicas e fisiológicas que ocorrem no aparelho estomatognático durante o envelhecimento é de suma importância para a correta avaliação do paciente idoso. Objetivos: descrição e abordagem das principais estruturas anatómicas do indivíduo, adulto e idoso. Estabelece-se uma anatomia comparativa e evolutiva durante o processo de envelhecimento. Pretende-se contribuir para o conhecimento e reflexão sobre o tema em questão e demonstrar a aplicabilidade deste conhecimento em contexto clínico. Métodos: realizou-se pesquisa bibliográfica, nas bases de dados Pubmed, b-on SciElo e Elsevier, no período entre 2006-2016. Resultados: Maxila - ocorre reabsorção óssea, alteração no contorno do arco da maxila, retrusão maxilar, rotação da maxila no sentido horário, diminuição gradual e constante do ângulo maxilar e redução vertical da altura maxilar. Mandíbula - aumento do ângulo da mandíbula, diminuição da densidade e volume ósseo. Articulação gonfose e Articulação Temporo-Mandibular - pode ocorrer tanto anquilose, como perda das estruturas de suporte. Observa-se degeneração e/ou perfuração do disco radicular e alteração do formato do côndilo. Dentes - cáries radiculares, fraturas dentárias e desgaste dentário. Ocorrem modificações histológicas no esmalte, dentina e polpa dentária. Periodonto: reabsorção do osso alveolar, gengiva atrófica com tendência a migração apical, deposição apical das camadas incrementais e desgaste de cemento exposto, ligamento periodontal fino, irregular e diminuição do espaço periodontal. Conclusões: as alterações anatómicas decorrentes do envelhecimento fisiológico são múltiplas. O Médico Dentista diante de um paciente idoso, deverá conhecer e distinguir entre uma alteração decorrente do envelhecimento fisiológico e uma alteração patológica, para o correto diagnóstico clínico e uma excelente decisão terapêutica. O Médico Dentista deverá contribuir para o envelhecimento saudável e para tal deve ser conhecedor em pleno da temática do presente trabalho.