Sudan : administrative and railroads.

" 563809756." on verso.

Aspectos ultra-estruturais dos canais secretores em órgãos vegetativos e reprodutivos de Anacardiaceae

The study assessed phloem canal development and ultra-structure in shoot apices of Spondias dulcis G. Forst., phloematic canal ultra-structure in shoot apices of Tapirira guianensis Aubl., and floral canal ultra-structure and development and fruit canal ultra-structure of the latter specie. The flower and fruit canals of Anacardium humile St.Hil. were also studied ultra-structurally. The canals in shoot apices of S. dulcis show schizo-lysigenous formation and the floral canals of T. guianensis show schizogenous development. Epithelial cells of S. dulcis and T. guianensis canals have rough endoplasmic reticulum, free ribosomes, elongated plastids of several shapes with osmiophilic inclusions and dictyosomes with production of vesicles. Such organelles participate in the secretion of a heterogeneous exudate, which is comprised of hydrophilic and lipophilic substances. The epithelial cells of the fruit of A. humile present elongated plastids with circular membrane system, which are involved in the synthesis of lipophilic substances. The results of the ultra-structural analyses of the epithelial cells corroborate the results previously obtained in a histochemical study. In the histochemical study, lipophilic and hydrophilic substances were identified in the canals of T. guinanensis and S. dulcis and only lipophilic substances were identified in the canals of A. humile. Based on the ultrastructural aspects of the secretory canals of T. guianensis and S. dulcis we concluded that the plastids of the epithelial cells of the two species are different although they produce secretion of similar composition. A new record for the family is the presence of a great number of circular plastids in epithelial cells of the fruit of Anacardium humile. The pattern found in the secretory canals of the studied species is the ecrine type of secretion release.

Influence of different adhesive systems on the pull-out bond strength of glass fiber posts

This in vitro study evaluated the tensile bond strength of glass fiber posts (Reforpost - Angelus-Brazil) cemented to root dentin with a resin cement (RelyX ARC - 3M/ESPE) associated with two different adhesive systems (Adper Single Bond - 3M/ESPE and Adper Scotchbond Multi Purpose (MP) Plus - 3M/ESPE), using the pull-out test. Twenty single-rooted human teeth with standardized root canals were randomly assigned to 2 groups (n=10): G1- etching with 37% phosphoric acid gel (3M/ESPE) + Adper Single Bond + #1 post (Reforpost - Angelus) + four #1 accessory posts (Reforpin - Angelus) + resin cement; G2- etching with 37% phosphoric acid gel + Adper Scotchbond MP Plus + #1 post + four #1 accessory posts + resin cement. The specimens were stored in distilled water at 37°C for 7 days and submitted to the pull-out test in a universal testing machine (EMIC) at a crosshead speed of 0.5 mm/min. The mean values of bond strength (kgf) and standard deviation were: G1- 29.163 ± 7.123; G2- 37.752 ±13.054. Statistical analysis (Student's t-test; a=0.05 showed no statistically significant difference (p<0.05) between the groups. Adhesive bonding failures between resin cement and root canal dentin surface were observed in both groups, with non-polymerized resin cement in the apical portion of the post space when Single Bond was used (G1). The type of adhesive system employed on the fiber post cementation did not influence the pull-out bond strength.

Evolution of Laparoscopic Colorectal Surgery in Brazil Results of 4744 Patients From the National Registry

Background: Since its introduction, laparoscopic colorectal surgery has raised intense debate and controversies regarding its safety and effectiveness. Methods: This multicentric registry reports the experience of 28 Brazilian surgical teams specializing in laparoscopic colorectal surgery. Results: Between 1992 and 2007, 4744 patients (1994 men-42% and 2750 women-58%) were operated upon, with ages ranging from 13 to 94 years (average 57.5y). Benign diseases were diagnosed in 2356 patients (49.6%). Most diseases were located in 50.7% of the left and sigmoid colon, 28.2% in the rectum and anal canal. 8.0% in the right colon, and diffuse 7.0%. There were 181 (3.8%) intraoperative complications (from 0% to 14%). There were 261 (5.5%) reported conversions to laparotomy (from 0% to 16.5%), mainly during the early experience (n = 119 - 59.8%). Postoperative complications were registered in 683 (14.5%) patients (from 5.0% to 50%). Mortality occurred in 43 patients (0.8%). Surgeons who performed less than 50 cases reported similar rates of intraoperative (4.2% vs. 3.8%,- P = 0.7), postoperative complications (20.8% vs. 14.3%; P = 0.07), and mortality (1.0% vs. 0.9%; P = 0.5) but the conversion rate was higher (10.4% vs. 5.4%; P = 0.04). Two thousand three hundred and eighty-nine (50.4%) malignant tumors were operated upon, and histologic classification showed 2347 (98%) adenocarcinomas, 30 (0.6%) spinocelular carcinomas, and 12 (0.2%) other histologic types. Tumor recurrence rate was 16.3% among patients followed more than I year. After an average follow-Lip of 52 months, 19 (0.8%) parietal recurrences were reported, 18 of which were in port sites and I in a patient with disseminated disease. There was no incisional recurrence in the ports used to withdraw the pathologic specimen. Compared with other registries, there was a 75% increase in the number of groups pet-forming laparoscopic colorectal surgery and a decrease in conversions (from 10.5%. to 5.5%) and mortality (from 1.5% to 0.9%) rates. Conclusions: (1) The number of patients operated upon increased expressively during the last years; (2) operative indications for benign and malignant diseases were similar, and diverticular disease of the colon comprised 40% of the benign ones; (3) conversion and mortality rates decreased over time; (4) Surgeon`s experience did not influence the complication rates, but was associated with a lower conversion; and (5) oncologic outcome expressed by recurrence rates showed results similar to those reported in conventional surgery.

Effects of light exposure time on composite resin hardness after root reinforcement using translucent fibre post

Objectives: The purpose of this in vitro study was to evaluate the Vickers hardness (VHN) of a Light Core (Bisco) composite resin after root reinforcement, according to the light exposure time, region of intracanal reinforcement and lateral distance from the light-transmitting fibre post. Methods: Forty-five 17-mm long roots were used. Twenty-four hours after obturation, the root canals were emptied to a depth of 12 mm and the root dentine was artificially flared to produce a 1 mm space between the fibre post and the canal walls. The roots were bulk restored with the composite resin, which was photoactivated through the post for 40 s (G1, control), 80 s (G2) or 120 s (G3). Twenty-four hours after post-cementation, the specimens were sectioned transversely into three slices at depths of 2, 6 and 10 mm, corresponding to the coronal, middle and apical regions of the reinforced root. Composite VHN was measured as the average of three indentations (100 g/15 s) in each region at lateral distances of 50, 200 and 350 mu m from the cement/post-interface. Results: Three-way analysis of variance (alpha = 0.05) indicated that the factors time, region and distance influenced the hardness and that the interaction time x region was statistically significant (p = 0.0193). Tukey`s test showed that the mean VHN values for G1 (76.37 +/- 8.58) and G2 (74.89 +/- 6.28) differed significantly from that for G3 (79.5 +/- 5.18). Conclusions: Composite resin hardness was significantly lower in deeper regions of root reinforcement and in lateral areas distant from the post. Overall, a light exposure time of 120 s provided higher composite hardness than the shorter times (40 and 80 s). (C) 2008 Elsevier Ltd. All rights reserved.

Influence of shaft design on the shaping ability of 3 nickel-titanium rotary systems by means of spiral computerized tomography

Objective. To evaluate the influence of shaft design on the shaping ability of 3 rotary nickel-titanium (NiTi) systems. Study design. Sixty curved mesial canals of mandibular molars were used. Specimens were scanned by spiral tomography before and after canal preparation using ProTaper, ProFile, and ProSystem GT rotary instruments. One-millimeter-thick slices were scanned from the apical end point to the pulp chamber. The cross-sectional images from the slices taken earlier and after canal preparation at the apical, coronal, and midroot levels were compared. Results. The mean working time was 137.22 +/- 5.15 s. Mean transportation, mean centering ratio, and percentage of area increase were 0.022 +/- 0.131 mm, 0.21 +/- 0.11, and 76.90 +/- 42.27%, respectively, with no statistical differences (P > .05). Conclusions. All instruments were able to shape curved mesial canals in mandibular molars to size 30 without significant errors. The differences in shaft designs seemed not to affect their shaping capabilities.

The contribution of multitemporal information from multispectral satellite images for automatic land cover classification at the national scale

Thesis submitted to the Instituto Superior de Estatística e Gestão de Informação da Universidade Nova de Lisboa in partial fulfillment of the requirements for the Degree of Doctor of Philosophy in Information Management – Geographic Information Systems

Backside-surface imprinting as a new strategy to generate specific plastic antibody materials

A backside protein-surface imprinting process is presented herein as a novel way to generate specific synthetic antibody materials. The template is covalently bonded to a carboxylated-PVC supporting film previously cast on gold, let to interact with charged monomers and surrounded next by another thick polymer. This polymer is then covalently attached to a transducing element and the backside of this structure (supporting film plus template) is removed as a regular “tape”. The new sensing layer is exposed after the full template removal, showing a high density of re-binding positions, as evidenced by SEM. To ensure that the templates have been efficiently removed, this re-binding layer was cleaned further with a proteolytic enzyme and solution washout. The final material was named MAPS, as in the back-side reading of SPAM, because it acts as a back-side imprinting of this recent approach. It was able to generate, for the first time, a specific response to a complex biomolecule from a synthetic material. Non-imprinted materials (NIMs) were also produced as blank and were used as a control of the imprinting process. All chemical modifications were followed by electrochemical techniques. This was done on a supporting film and transducing element of both MAPS and NIM. Only the MAPS-based device responded to oxLDL and the sensing layer was insensitive to other serum proteins, such as myoglobin and haemoglobin. Linear behaviour between log(C, μg mL−1) versus charged tranfer resistance (RCT, Ω) was observed by electrochemical impedance spectroscopy (EIS). Calibrations made in Fetal Calf Serum (FCS) were linear from 2.5 to 12.5 μg mL−1 (RCT = 946.12 × log C + 1590.7) with an R-squared of 0.9966. Overall, these were promising results towards the design of materials acting close to the natural antibodies and applied to practical use of clinical interest.

Plano de negócios para a construção e comercialização de casas de construção rápida: relatório de estágio na empresa Quantal, S.A.

O estágio realizado ocorreu numa empresa do Grupo Quantal, empresa essa que para além de fabricar e comercializar portas de segurança, presta serviços de qualidade no que diz respeito à construção, arquitetura e acabamentos. A pensar na constante inovação e nas melhores tendências mundiais, a empresa decidiu apostar na produção e comercialização de um novo produto, as casas de construção rápida, pretendendo com este tipo de construção não só evoluir em relação às soluções de mercado, mas manter-se na linha da frente do desenvolvimento. O objetivo deste estágio centrou-se assim na colaboração da realização de um Plano de Negócios para a produção e comercialização de casas de construção rápida, por forma a estruturar as principais ideias e objetivos que se deseja atingir, definindo os passos necessários para que os mesmos sejam alcançados e os riscos e as incertezas sejam diminuídos, para que se consiga com maior exatidão analisar a viabilidade económica e financeira do projeto. Complementarmente, no decurso do estágio foram ainda realizadas atividades usuais de um departamento financeiro: reconciliações bancárias, análise de extratos de conta corrente dos fornecedores e clientes, conversação com clientes e fornecedores para definirmos previsões de recebimento e pagamento respetivamente, elaboração de mapas de fluxos de caixa, e preparação de informação para o Plano de Tesouraria.

Spatiotemporal analysis of reported cases of acute Chagas disease in the State of Pernambuco, Brazil, from 2002 to 2013

INTRODUCTION: Control strategies to eliminate the transmission of Chagas disease by insect vectors have significantly decreased the number of reported acute cases in Brazil. However, data regarding the incidence and distribution of acute Chagas disease cases in the State of Pernambuco are unavailable in the literature. METHODS: A geographical information system was used to delineate the spatiotemporal distribution profile of the cases from 2002 to 2013 in 185 municipalities of Pernambuco based on the municipality where notification occurred. The results were presented in digital maps generated by the TerraView software (INPE). RESULTS: A total of 302 cases of acute disease were recorded in 37.8% of the municipalities, for a total of 0.13 cases per 1,000,000 inhabitants per year. Out of the 302 cases, 99.3% were reported between 2002 and 2006. The most affected municipalities were Carnaubeira da Penha, Mirandiba and Terra Nova. The risk maps showed a significant decrease in the number of notifications and a concentration of cases in the Midwest region. CONCLUSIONS: This study highlights a significant decrease in new cases of acute Chagas disease in Pernambuco starting in 2006 when Brazil received an international certification for the interruption of vectorial transmission by Triatoma infestans. However, control strategies should still be encouraged because other triatomine species can also transmit the parasite; moreover, other transmission modes must not be neglected.

Utilização de ferramentas da qualidade num sistema operacional numa empresa

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

Debris flow hazard modelling on medium scale: Valtellina di Tirano, Italy

Debris flow hazard modelling at medium (regional) scale has been subject of various studies in recent years. In this study, hazard zonation was carried out, incorporating information about debris flow initiation probability (spatial and temporal), and the delimitation of the potential runout areas. Debris flow hazard zonation was carried out in the area of the Consortium of Mountain Municipalities of Valtellina di Tirano (Central Alps, Italy). The complexity of the phenomenon, the scale of the study, the variability of local conditioning factors, and the lacking data limited the use of process-based models for the runout zone delimitation. Firstly, a map of hazard initiation probabilities was prepared for the study area, based on the available susceptibility zoning information, and the analysis of two sets of aerial photographs for the temporal probability estimation. Afterwards, the hazard initiation map was used as one of the inputs for an empirical GIS-based model (Flow-R), developed at the University of Lausanne (Switzerland). An estimation of the debris flow magnitude was neglected as the main aim of the analysis was to prepare a debris flow hazard map at medium scale. A digital elevation model, with a 10 m resolution, was used together with landuse, geology and debris flow hazard initiation maps as inputs of the Flow-R model to restrict potential areas within each hazard initiation probability class to locations where debris flows are most likely to initiate. Afterwards, runout areas were calculated using multiple flow direction and energy based algorithms. Maximum probable runout zones were calibrated using documented past events and aerial photographs. Finally, two debris flow hazard maps were prepared. The first simply delimits five hazard zones, while the second incorporates the information about debris flow spreading direction probabilities, showing areas more likely to be affected by future debris flows. Limitations of the modelling arise mainly from the models applied and analysis scale, which are neglecting local controlling factors of debris flow hazard. The presented approach of debris flow hazard analysis, associating automatic detection of the source areas and a simple assessment of the debris flow spreading, provided results for consequent hazard and risk studies. However, for the validation and transferability of the parameters and results to other study areas, more testing is needed.

El futuro de la sanidad ambiental en Andalucía: oportunidades de mejora.

In the present article is presented a portrait of the situation of the environmental health in the administration of Andalusian Goverment; are analyzed implanted management formulations and we believe a reflection space on the professional exercise and the course begun with the organizational process in the Andalusian public health. The public health system has not undergone reconstruction from the process of transferences from the State towards the autonomous Communities. We identified the extrapolation of the model clinicalassistance management to the public health structures without delving what is sufficient in their organization and objectives. Setting of business process management (BMP) has got worse the administrative bureaucracy and the teamwork has not been preceded of alliances and agreements that generate feeling of ownership the same organization to avoid professional conflicts. We bet on strengthening the paper of the environmental health technicians as referring in the identification of this performances within public health system. For this propose we need the implication of all the professionals in the reform of the organization and management of the health public, to evolve in the professional exercise creating a regulated academic specialty and to define the competences maps in their different capabilites areas.

Revision of the Leucosphyrus group of Anopheles (Cellia) (Diptera, Culicidae)

Revision of the Leucosphyrus Group of Anopheles (Cellia) (Diptera, Culicidae). This is a comprehensive revision of 20 species of the Leucosphyrus Group of the Neomyzomyia Series of Anopheles (Cellia). Morphological description of the adults, male and female, male genitalia, pupa and fourth-instar larva are provided for each taxon in addition to bionomics, distribution data and systematic discussion for each species, including diagnostic characters. Identification keys for females and fourth-instar larvae are provided. When possible medical importance of each species is included. Illustrations of of the adults, fourth-instar larvae and pupae are provided. Distribution maps for each species are mainly based on the material examined; however, when possible published data were also used. Tables on adult character variations, fourth-instar larval and pupal setal branching are included as appendices. A neotype for An. takasagoensis Morishita and An. sulawesi Koesoemawinangoen, and a lectotype for An. balabacensis Baisas, are designated. The authorship of An. sulawesi previously cited as Waktoedi is corrected to Koesoemawinangoen.

Tying up the loose ends in simple correspondence analysis

Although correspondence analysis is now widely available in statistical software packages and applied in a variety of contexts, notably the social and environmental sciences, there are still some misconceptions about this method as well as unresolved issues which remain controversial to this day. In this paper we hope to settle these matters, namely (i) the way CA measures variance in a two-way table and how to compare variances between tables of different sizes, (ii) the influence, or rather lack of influence, of outliers in the usual CA maps, (iii) the scaling issue and the biplot interpretation of maps,(iv) whether or not to rotate a solution, and (v) statistical significance of results.