Ag-TiNx electrodes deposited on piezoelectric poly(vinylidene fluoride) for biomedical sensor applications

Electroactive polymers are one of the most interesting class of polymers used as smart materials in various applications, such as the development of sensors and actuators for biomedical applications in areas such as smart prosthesis, implantable biosensors and biomechanical signal monitoring, among others. For acquiring or applying the electrical signal from/to the piezoelectric material, suitable electrodes can be produced from Ti based coatings with tailored multifunctional properties, conductivity and antibacterial characteristics, through Ag inclusions. This work reports on Ag-TiNx electrodes, deposited by d. c. and pulsed magnetron sputtering at room temperature on poly(vinylidene fluoride), PVDF, the all-round best piezoelectric polymer.. Composition of the electrodes was assessed by microanalysis X-ray system (EDS - energy dispersive spectrometer). The XRD results revealed that the deposition conditions preserve the polymer structure and suggested the presence of crystalline fcc-TiN phase and fcc-Ag phase in samples with N2 flow above 3 sccm. According to the results obtained from SEM analysis, the coatings are homogeneous and Ag clusters were found for samples with nitrogen flow above 3 sccm. With increasing nitrogen flow, the sheet resistivity tend to be lower than the samples without nitrogen, leading also to a decrease of the piezoelectric response. It is concluded that the deposition conditions do significantly affect the piezoelectric polymer, which maintain its characteristics for sensor/actuator applications.

Estudo das propriedades físicas fundamentais de filmes finos intermetálicos do tipo Ti-Me (Me = Al, Au) na funcionalização de elétrodos - sensores para dispositivos biomédicos

Dissertação de mestrado integrado em Engenharia de Materiais

Tight open knots.

The tightest open conformations of a few prime knots (3(1), 4(1), 5(1), 5(2), and 6(3)) found with the use of the SONO algorithm are presented and discussed. The conformations are obtained from the tightest closed conformations of the knots by cutting and opening them at different locations. The length of the rope engaged in each of the open conformations is calculated. The curvature and torsion profiles of the unique tightest conformations of the 3(1) and 4(1) open knots are presented and discussed. In particular, symmetry properties of the knots reflected within their curvature and torsion profiles are analysed. Connections with the physics of polymers are discussed.

Elaboració de membranes de fibra buida modificades amb nanopartícules metàl·liques per aplicacions catalítiques

Investigación producida a partir de una estancia en la Université Paul Sabatier, Toulouse III - CNRS, entre 2007 y 2009. Durante los últimos años la investigación centrada en nuevos materiales de tamaño nanoscòpico (nanopartículas, quantum dots, nanotubos de carbono,...) ha experimentado un crecimiento considerable debido a las especiales propiedades de los "nanoobjetos" con respecto a magnetismo, catálisis, conductividad eléctrica, etc ... Sin embargo, hoy en día todavía existen pocas aplicaciones de las nanopartículas en temas medioambientales. Uno de los motivos de esta situación es la posible toxicidad de los nanoobjetos, pero existe también una dificultad tecnológica dado que las nanopartículas tienden a agregarse y es muy difícil manipularlas sin que pierdan sus propiedades especiales. Así, aunque la preparación de materiales catalíticos nanoestructurados es muy interesante, es necesario definir nuevas estrategias para prepararlos. Este proyecto de investigación tiene como objetivo principal la preparación de nuevas membranas catalíticas con nanopartículas metálicas en el interior para aplicaciones de tratamiento de agua. La innovación principal de este proyecto consiste en que las nanopartículas no son introducidas en la matriz polimérica una vez preformadas sino que se hacen crecer en el interior de la matriz polimérica mediante una síntesis intermatricial. El único requisito es que la matriz polimérica contenga grupos funcionales capaces de interaccionar con los precursores de las nanopartículas. Una vez finalizado el proyecto se puede afirmar que se han logrado parte de los objetivos planteados inicialmente. Concreamente ha quedado demostrado que se pueden sintetizar nanopartículas metálicas de metales nobles (platino y paladio) en membranas de fibra hueca de micro- y ultrafiltración siguiendo dos metodologías diferentes: modificación fotoquímica de polímeros y deposición de multicapas de polielectrolitos. Los nuevos materiales son efectivos en la catálisis de reducción de un compuesto modelo (4-nitrofenol con borohidruro de sodio) y, en general, los resultados han sido satisfactorios. Sin embargo, se ha puesto de manifiesto que el uso de un reactivo que genera hidrógeno gas en contacto con la solución acuosa dificulta enormemente la implementación de la reacción catalítica al ser el medio de la membrana una matriz porosa. Así, como conclusión principal se puede decir que se han encontrado las limitaciones de esta aproximación y se sugieren dos posibilidades de continuidad: la utilización de las membranas sintetizadas en contactores gas-líquido o bien el estudio y optimización del sistema de membrana en configuración de membranas planas, un objetivo más asequible dada su menor complejidad. Esta investigación se ha realizado en el seno del “Laboratoire de Génie Chimique” de Toulouse y del Departamento de Química de la Michigan State University y ha sido posible gracias a un proyecto financiado por la “Agence National pour la Recherce” y al programa PERMEANT entre el CNRS y la NSF.

Modelització de la producció de melanina a partir de polifenol oxidasa d'Agaricus bisporus

Les melanines són un grup heterogeni de polímers producte de reaccions enzimàtiques en els teixits vegetals que contenen compostos fenòlics o polifenòlics. Estudis recents han descobert algunes propietats benèfiques de les melanines sobre la salut, tals com antioxidants, antiinflamatòries, immunològiques i propietats anti-tumorals. Així, no només la seva eliminació ha de ser examinada, sinó que també podria considerar-se la seva addició a aliments funcionals de nova creació. D’aquesta manera, es requereix conèixer el mecanisme cinètic de la lanogènesi abans de la seva possible utilització industrial. S’ha desenvolupat un model cinètic per explicar la formació de melanina a partir de L-tirosina utilitzant polifenol oxidasa d’Agaricus bisporus i monitoritzant l'absorbància de la solució. Aquesta expressió permet descriure la formació de melanina en funció del temps de reacció i obtenir alguns paràmetres importants que defineixen el producte, com el coeficient d'extinció. L’absorbància comença a créixer després d'un període de latència en què es produeixen productes intermedis incolors. El coeficient d'extinció dels productes resultants no és un valor constant, perquè depèn de les condicions de cada experiment. La tirosinasa tingué un menor efecte catalitzador sobre la L-tirosina (primera reacció que catalitza), que sobre L-DOPA (segona reacció).

Le mouvement peut-il guérir? : histoire de l'engagement des médecins français dans l'élaboration de l'éducation physique (1741-1888)

Résumé : Cette recherche doctorale analyse l'engagement des médecins français autour de l'éducation physique entre 1741 et 1888. Basé sur un travail prosopographique d'identification des médecins qui ont participé à l'élaboration de l'éducation physique, ce travail repose sur une mise en dialogue de leurs prises de position respectives. Pour réaliser cette enquête, nous avons compulsé un large corpus de sources primaires, composé des ouvrages consacrés à la gymnastique médicale mais aussi une très large portion de la production d'imprimés touchant à l'anatomie, l'hygiène, la thérapeutique, la physiologie, l'orthopédie, etc. Le corpus contient également des articles des principaux dictionnaires médicaux de la période et des principales revues médicales du XIXe siècle. Avec une approche critique de l'historiographie et à partir de ce corpus, nous avons travaillé dans le cadre de contextes définis pour saisir au plus près les logiques sociales et scientifiques amenant les médecins auprès de l'éducation physique. Trois conjonctures successives structurent l'engagement médical. Entre 1741 et 1817, la thèse retrace l'émergence d'un questionnement ; les années 1817-1847 constituent un « moment orthopédique » dans la formulation de la gymnastique ; et finalement entre 1847 et 1888, on observe une diversification des voies de légitimation médicale des exercices du corps. Ces trois moments de l'histoire des « discours gymniques médicaux » proposent un certain nombre de convergences : la prégnance de l'orthopédie, une certaine concentration autour de la santé des corps féminins, l'inclusion dans un « projet hygiéniste » ; mais aussi des divergences et des singularités : relatives à la progressive structuration en cours du champ médical, à l'implication progressive du politique (surtout après 1845/1850), aux transformations des pathologies/doctrines médicales « dominantes », ainsi qu'à l'importance plus ou moins forte de l'une ou l'autre des facettes de l'éducation physique (militaire, athlétique, « médicinale » ou pédagogique). Le processus est aussi celui de l'expérimentation de la curation de certaines pathologies (scolioses, affections nerveuses), dans des configurations idéologiques/scientifiques marquées par la « dégénération » (XVIIIe siècle), l'anatomie pathologique (début du XIXe siècle) et plus tard la « dégénérescence » et les affections nerveuses (après 1850). Dans le cadre d'une dynamique d'inspiration « foucaldienne », ces recommandations évoluent d'une anatomopolitique - caractérisée par un essor de discours empreints d'anatomie au XVIIIe siècle - vers une biopolitique - caractérisée par l'engagement de l'Etat qui fait de la gymnastique une discipline d'enseignement, pensée à des fins hygiéniques dans la seconde moitié du XIXe - où le processus réside en fait dans une biologisation progressive des recommandations pratiques. Observée à l'aune de la formulation médicale de l'éducation physique, la biopolitique n'est pas réalisée dans la seconde moitié du XVIIIe, elle se compose lentement aux marges de l'institution scolaire et des gymnastiques pédagogico-militaires pour constituer un projet thérapeutique et hygiénique plus construit après 1850. Abstract : This dissertation analyzes French doctor's involvement in debates and initiatives concerning physical education between 1741 and 1888. Based on a prosopographic inventory of those physicians who participated in the development of physical education, it explores the variety of their discourses with respect to the practice of physical exercises. This investigation relies on a large selection of primary sources: works devoted to medical gymnastic, but also medical treatises related to anatomy, hygiene, therapeutics, physiology, orthopedics, etc. The sources also include articles from the major medical dictionaries and journals of the nineteenth century. These documents are used to explore the socio-scientific mechanisms that underlay physicians' commitment to physical education. Three chronological periods structure medical engagement in the area of physical education. Between 1741 and 1817 the thesis traces the emergence of a questioning; the years 1817 to 1847 represent an « orthopedic moment » in the development of gymnastics; finally between 1847 and 1888, one witnesses a diversification of the legitimation process between medicine and gymnastics. These three moments in the history of « medical and gymnastic discourses » offer a number of similarities: the weight of orthopedics, the ongoing focus on the health of the female body, and the association of these discourses with a « hygienic project ». But differences also distinguish these periods as the medical field became more structured and new medical doctrines became dominant, with the increasing involvement of politics (especially after 1850), and with the changing weight of priorities within physical education (military, athletic, « medical » or pedagogic). Medical discourses centered on the curing of certain diseases (scoliosis or nervous disorders) are analyzed within an ideological configuration marked by the idea of « degeneration » (in the eighteenth century), « pathological anatomy » (in the early nineteenth century) and later « dégénérescence » associated with nervous disorders (after 1850). The dissertation draws on Foucault's historical epistemology to understand how medical recommendations evolve from an anatomopolitics - characterized by a surge in anatomical discourses - toward a biopolitics - characterized by the commitment of the State to introduce gymnastics for hygienic purposes into schools in the second half of the nineteenth century. This process reveals a progressive "biologization" of practical recommendations. The medical discourses about physical education show that Foucault's biopolitical power is not achieved in the second half of the eighteenth century, but develops slowly at the margins of the school system and of pedagogical and military gymnastic, becoming a veritable hygienic and therapeutic project only after 1850.

Biopolymers

Plants naturally synthesize a variety of polymers that have been used by mankind as a source of useful biomaterials. For example, cellulose, the main constituent of plant cell wall and the most abundant polymer on earth, has been used for several thousand years as a source of fibers for various fabrics. Similarly, rubber extracted from the bark of the tree Hevea brasiliensis, has been a major source of elastomers until the development of similar synthetic polymers. In the last century, the usefulness of plant polymers as biomaterials has been expanded through the chemical modification of the natural polymers. For example, a number of plastics have been made by substituting the hydroxyl groups present on the glucose moiety of cellulose with larger groups, such as nitrate or acetate, giving rise to materials such as cellulose acetate, a clear plastic used in consumer products such as toothbrush handles and combs. Similarly, starch has been used in the manufacture of plastics by either using it in blends with synthetic polymers or as the main constituent in biodegradable plastics. The advent of transformation and expres- sion of foreign genes in plants has created the possibility of expanding the usefulness of plants to include the synthesis of a range of biomolecules. In view of the capacity of certain crops to produce a large quantity of organic raw material at low cost, such as oils and starch, it is of interest to explore the possibility of using transgenic plants as efficient vectors for the synthesis of biopolymers. Such plant based biopolymers could replace, in part, the synthetic plastics and elastomers produced from petroleum, offering the advantage of renewability and sustainability. Furthermore, being natural pro- ducts, biopolymers are usually biodegradable and can thus contribute to alleviate problems associated with the management of plastic waste. In this article, the emphasis will be on the use of transgenic plants for the synthesis of two novel classes of industrially useful polymers, namely protein based polymers made from natural or artificial genes, and polyhydroxyalkanoates, a family of bacterial poly- esters having the properties of biodegradable plastics and elastomers.

Motility tests for drugs preventing PolyQ aggregation in recombinant Caenorhabditis elegans.

The pathological formation of proteinaceous aggregates that accumulate into the brain cells of patients are hallmarks of neurodegenerative diseases such as Alzheimer's disease, amyotrophic lateral sclerosis and the heterogeneous group of polyglutamine (polyQ) diseases. In the polyQ diseases, the most upstream events of the pathogenic cascade are the misfolding and aggregation of proteins, such as huntingtin in Huntington's disease, that contain expanded stretch of glutamine residues above 35--‐40 repeats. This expanded polyQ stretch triggers the misfolding and aggregation of cytotoxic polyQ proteins in the neurons that cause cell death through different processes, like apoptosis, excessive inflammation, formation of free radicals, eventually leading to neuronal loss and neurodegeneration. This study focuses on the cellular network of chaperone proteins that can prevent protein aggregation by binding misfolding intermediates and may, as in the case of HSP70, actively unfold misfolded proteins into refoldable non--‐toxic ones (Hinault et al., 2010; Sharma et al., 2011). The chaperones can also collaborate with the proteasome to convert stable harmful proteins into harmless amino acids. Thus, the chaperone proteins that are the most important cellular factors of prevention and curing of protein misfolding, are negatively affected by aging (Morley et al., 2002) and fail to act properly in the neurons of aged persons, which eventually may lead to neurodegenerative pathologies. The general aim of this research was to identify least toxic drugs that can upregulate the expression of chaperone genes in cells suffering from polyQ--‐ mediated protein aggregation and degeneration. The specific aim of this study was to observe the effect of ten drugs on polyQ aggregation in a recombinant nematode Caenorhabditis elegans expressing a chimeric protein containing a sequence of 35 glutamines (Q35) fused to the green fluorescent protein in muscle cells, which causes an age--‐ and temperature--‐ dependent phenotype of accelerated paralysis. The drugs were selected after having proven their causing the overexpression of chaperone proteins in a previous wide screening of 2000 drugs on the moss plant Physcomitrella patens. The screening that we performed in this study was on these ten drugs. It suggested that piroxicam and anisindione were good reducers of polyglutamine disease mediated paralysis. A hypothesis can be made that they may act as good enhancers of the heat shock response, which causes the overexpression of many HSP chaperones and thus reduce motility impairment of polyQ disease expressing nematodes. Piroxicam was found to have the greatest effect on reducing polyQ35 proteins aggregates mediated paralysis in a dose--‐dependent manner but was also found to either have a toxic effect on wild type C.elegans, either to change its natural motility behavior, eventually reducing its motility in both cases. Chloroform should be preferred over DMSO as a drug solvent as it appears to be less toxic to C.elegans.

Intraocular implants for extended drug delivery: therapeutic applications.

An overview of ocular implants with therapeutic application potentials is provided. Various types of implants can be used as slow release devices delivering locally the needed drug for an extended period of time. Thus, multiple periocular or intraocular injections of the drug can be circumvented and secondary complications minimized. The various compositions of polymers fulfilling specific delivery goals are described. Several of these implants are undergoing clinical trials while a few are already commercialized. Despite the paramount progress in design, safety and efficacy, the place of these implants in our clinical therapeutic arsenal remains limited. Miniaturization of the implants allowing for their direct injection without the need for a complicated surgery is a necessary development avenue. Particulate systems which can be engineered to target specifically certain cells or tissues are another promising alternative. For ocular diseases affecting the choroid and outer retina, transscleral or intrasscleral implants are gaining momentum.

Hienopaperimassojen lujuusominaisuudet nopeassa vetokuormituksessa

Työssä verrattiin koivu-, akaasia- ja eucalyptussellujen käyttökelpoisuutta hienopapereiden kuituraaka-aineena. Kirjallisuusosassa todettiin radan hallinnan paperikoneiden avoimissa vienneissä riippuvan käytetyn geometrian lisäksi lujuus- ja relaksaatio-ominaisuuksista. Kuituverkoston käyttäytymiseen jännityksen alaisena vaikuttavat kuitudimensiot, kosteus ja lämpötila sekä kuituverkostoon kohdistetun jännityksen nopeus ja määrä. Relaksaationopeus ja vetolujuus kasvavat kuivilla papereilla vetonopeuden lisääntyessä. Kosteuspitoisuuden kasvattaminen alentaa puukuiduissa olevien polymeerien lasisiirtymälämpötilaa, jonka seurauksena vetolujuus ja relaksaatiokireys laskevat voimakkaasti. Kosteuspitoisuuden kasvaessa murtovenymä kasvaa lähes lineaarisesti ja repäisylujuus sekä murtotyö saavuttavat maksiminsa tietyssä kosteuspitoisuudessa. Kokeellisessa osassa keskityttiin hienopaperimassojen lujuus- ja relaksaatiokäyttäytymisen selvittämiseen nopeassa vetokuormituksessa. Lisäksi määritettiin laatu-, massa- ja rakenneominaisuuksia valituille koepisteille. Muuttujina kokeissa olivat massojen kuiva-ainepitoisuudet ja jauhatusolosuhteet sekä havusellun osuus hienopaperimassoissa.CSF-tasoon 350 ml jauhetuista näytteistä parhaat lujuus ja relaksaatio-ominaisuudet olivat koivulla ja heikoimmat akaasialla. Erot koepisteiden välillä korostuivat pienellä havusellun määrällä, mutta kaventuivat huomattavasti havusellun määrää lisättäessä. Samaan vetolujuuteen jauhettaessa massojen erot poistuvat kokonaan. Kuivilla näytteillä löydettiin erinomainen korrelaatio myötölujuuden ja relaksaatiokireyden välille. Puristinkuivien näytteiden relaksaatiokireyksiä voidaan kokeiden valossa ennustaa parhaiten kuivien näytteiden vetolujuuksista. Myös elastisten venymien osuuksille ja kuituseinämien paksuuksille löydettiin selvä yhteys.Eucalyptus- ja akaasiamassojen erinomaisuus hienopapereiden raaka-aineena korostui niiden optisissa ominaisuuksissa, erityisesti korkeana valonsirontana. Verrattaessa samassa vetolujuudessa ja relaksaatiokireydessä valonsirontakertoimien arvoja havaittiin akaasian olevan paras koivun jäädessä heikoimmaksi. Lisäksi akaasian ja eucalyptuksen kapeat kuitujakaumat ovat edullisia painokoneessa värin tasaisen imeytymisen kannalta. Akaasian pienet ja taipuisat kuidut antavat paperille tasaisen pinnan ja siten painatuksessa tasaisen painoalustan.

Prosessiparametrien vaikutus polymeerien diodilaserhitsaukseen

Diplomityössä tutkittiin polymeerien diodilaserhitsausta ja tavoitteena oli selvittää eri prosessiparametrien vaikutus hitsin laatuun. Kokeissa käytettyjä hitsausmenetelmiä olivat jatkuva hitsaus, puolisimultaanihitsaus ja Clearweld-menetelmä. Materiaaleina käytettiin polykarbonaattia ja ABS + PC -seosta. Kokeissa tarkasteltiin prosessiparametrien vaikutusta hitsin lujuuteen, leveyteen sekä hitsin tuhoutumiseen ja huokoisuuteen. Hitsin lujuus kasvoi hitsaustehoa nostettaessa tiettyyn pisteeseen asti, jonka jälkeen hitsi alkoi tuhoutumaan ja lujuus lähti laskuun. Hitsaustehon lisäksi hitsin lujuuteen vaikuttavia prosessiparametreja olivat hitsausnopeus ja ilmarako, joiden kasvaessa hitsin lujuus laski. Lisäksi puolisimultaanihitsauksessa pyyhkäisyjen määrä vaikutti hitsin lujuuteen; suuremmalla pyyhkäisyjen määrällä saatiin lujempi hitsi. Hitsin leveydellä ja lujuudella ei ollut vaikutusta toisiinsa, mutta hitsin tuhoutumisella ja huokosten määrällä hitsissä oli selkeä yhteys hitsin lujuuteen. Kun hitsissä alkoi esiintyä tuhoutumista, hitsin lujuus lähti laskuun. Clearweld-menetelmällä tarvittavat hitsaustehot olivat samaa suuruusluokkaa kuin jatkuvassa hitsauksessa. Hitsausparametrialueeseen, jolla saadaan aikaan laadukas hitsi, vaikuttavat hitsausteho, hitsausnopeus, ilmarako ja säteen tehotiheys sekä puolisimultaanihitsauksessa pyyhkäisyjen määrä. Hitsausnopeuden ja ilmaraon kasvaessa parametrialue kapenee. Paras liitos saadaan aikaiseksi, kun kappaleiden välillä ei ole ilmarakoa. Tällöin myös hitsausparametrialue on laajempi.

Melamiinipinnoituslinjan puristusparametrien määrittäminen

Tämän tutkimuksen tarkoituksena oli määrittää melamiinipinnoituslinjalla käytettäville eri pinnoituskalvoille linjan käytön kannalta optimaaliset puristusparametrit. Tutkimuksessa vertailtiin erityisesti puristuslämpötilan ja -ajan vaikutusta pinnoitettujen levyjen pinnoitteiden kypsymiseen. Pinnoitteiden kypsyminen mitattiin pääasiassa kypsyystestien avulla. Tulosten pohjalta laadittiin 6 eri pinnoitusreseptiä, joihin pinnoitteet jaoteltiin. Yksi pinnoitusresepti pitää sisällään tiedot käytettävistä puristusparametreista, eli puristuspaineesta, -lämpötilasta ja -ajasta. Testien tuloksia analysoitaessa havaittiin eri pinnoitteiden käyttäytyvän eri tavoin. Osa pinnoitteista kesti korkeampia lämpötiloja, osa taas vaati pidemmän puristusajan sopivan kypsyysasteen saavuttamiseksi. Sopiviin puristusaikoihin havaittiin vaikuttavan erityisesti käytetyn hartsin reaktiivisuus ja kalvoissa käytetyn pigmenttiväriaineen tummuus.

Irradiação de polímeros com feixe de elétrons: caracterização de íons positivos através da técnica de tempo-de-vôo

With the aim of studying the interaction of fast electrons with solid surfaces we have developed an experimental set-up based on electron stimulated desorption (ESD) coupled to time-of-flight (TOF) mass spectrometry. Poly(methyl methacrylate) and poly(vynil chloride) samples have been irradiated by a pulsed electron beam of 1.2 keV and 0.18 µs FWHM. The results show that H+ is the main ionic species to desorb after electron bombardment. In addition, other ionic fragments were also observed and assigned. These results show the potentiality of this technique in the study of ESD of polymers.

A tecnologia da reciclagem de polímeros

Solid municipal waste contains a large volume of polymers and its final disposal is a serious environmental problem. Consequently, the recycling of the principal polymers present in the solid waste is an alternative. In this review we describe the mechanical and chemical recycling of polymers and the energy recovery from plastic wastes. Polymer recycling involves not only the development of processing technologies, but also the solution of many chemical and analytical problems. The technological, economical and social aspects of polymer recycling are also considered.

Ação de colorantes na degradação e estabilização de polímeros

Dyes and pigments are additives used in polymers to improve mainly the aesthetic properties of the material. However, the incorporation of these additives can directly affect polymer stability. The colorants can drastically decrease the lifetime and the performance of the material or can act as a stabilizer, improving significantly the stability of the polymer against degradation. Interaction between colorants and polymers is the cause of the stability changes. Some mechanisms are proposed to explain the action of colorants on polymers. However it is difficult to foresee this action without experiments. This work reviews the main mechanisms involved in the degradation and stabilization of polymers containing colorants.