An optical fibre based evanescent wave sensor to monitor the deposition rate of thin films

A novel fibre optic sensor for the in situ measurement of the rate of deposition of thin films has been developed. Evanescent wave in the uncladded portion of a multimode fibre is utilised for this sensor development. In the present paper we demonstrate how this sensor is useful for the monitoring of the deposition rate of polypyrrole thin films, deposited by an AC plasma polymerisation method. This technique is simple, accurate and highly sensitive compared with existing techniques.

Mechanism of electrical conduction in plasma polymerized furfural thin films

Polyfurfural thin films lying in the thickness range of 1300–2000 A˚ were prepared by ac plasma polymerization technique. The current–voltage characteristics in symmetric and asymmetric electrode configuration were studied with a view to determining the dominant conduction mechanism.It was found that the Schottky conduction mechanism is dominant in plasma polymerized furfural thin films.The predominance of Schottky mechanism was further confirmed based on the thermally stimulated current measurements.

Novel applications of cashew nut shell liquid in the polymer field

This research project aims at developing new applications for CNSL in the polymer field. Cashew nut shell liquid (CNSL) is a cheap agro-byproduct and renewable resource which consists mainly of substituted phenols. By using CNSL in place of phenol, phenol derived from petrochemicals can be conserved and a cheap agro-byproduct utilized.In this study CNSL based resin is prepared by condensing a mixture of phenol and CNSL with hexamethylenetetramine and the effect of P: F ratio and CNSL: P ratio on the properties of synthesized resin is studied. The adhesive properties of CNSL based resin in combination with neoprene rubber are investigated. The effect of varying the stoichiometric ratios between total phenol and formaldehyde and CNSL and phenol of the resin, resin content, choice and extent of fillers and adhesion promoters in the adhesive formulation are studied. The effect of resin on the ageing properties of various elastomers is also studied by following changes in tensile strength, elongation at break, modulus, tear strength, swelling index and acetone soluble matter. Crude CNSL and resins with different P: F ratios and CNSL: P ratios are incorporated into elastomers. Lastly, utility of CNSL based resin as binder for making particleboard is investigated.The results show that CNSL based resin is an effective ingredient in adhesives for bonding aluminium to aluminium. The resin used for adhesive fonnulation gives the best performance at 45 to 55 phr resin and a total phenol: formaldehyde of l:2.9. The resin when added at a rate of l5 phr improves ageing characteristics of elastomers with respect to mechanical properties. The reaction mixture of CNSL and hexa and the resin resulting from the condensation of CN SL, phenol and hexa can be used as effective binders for moulding particleboard.

Studies on the bacteria associated with Penaeus indicus in a culture system

Ocean persists as a rich and renewable source of cheap protein for the whole world. Among the prawns/shrimps landed from the Indian Ocean and her backwaters, more than 90% are exported to affluent countries. The Indian white prawn Penaeus indicus, constitutes the major portion of the frozen shrimps exported from India every year. The present study is aimed at gathering information on the total heterotrophic bacteria (THB) associated with B. indicus, with special reference to eggs, nauplii, zoeae, mysis, and post larvae in hatchery, and juveniles and adults in culture pond. Simultaneously, IHB associated with E. indicus in its natural habitat also is studied for comparison. It is envisaged that this information will be highly useful for modifying the existing hatchery and pond management-practices.

Microwave Absorption of Nylon 6,6 Based Polymer Ferrite Composites

Ferrite composites are magnetic composites consisting of fine particles of metal ferrites dispersed in the polymer matrix. These composites have a variety of applications as flexible magnets, pressure/photo sensors and microwave absorbers. Polymers and magnetic materials play a very important role in our day to day life. Both natural and synthetic polymers are today indispensable to mankind. The polymers, which include rubber, plastics and fibers, make life easier and more comfortable.

An Improved Design of Combinational Digital Circuits with Multiplexers using Genetic Algorithm

This paper presents a new approach to the design of combinational digital circuits with multiplexers using Evolutionary techniques. Genetic Algorithm (GA) is used as the optimization tool. Several circuits are synthesized with this method and compared with two design techniques such as standard implementation of logic functions using multiplexers and implementation using Shannon’s decomposition technique using GA. With the proposed method complexity of the circuit and the associated delay can be reduced significantly

Investigation of Multiphase Power Converter using Integrated Coupled Inductor Regarding Electric Vehicle Application

The challenge of reducing carbon emission and achieving emission target until 2050, has become a key development strategy of energy distribution for each country. The automotive industries, as the important portion of implementing energy requirements, are making some related researches to meet energy requirements and customer requirements. For modern energy requirements, it should be clean, green and renewable. For customer requirements, it should be economic, reliable and long life time. Regarding increasing requirements on the market and enlarged customer quantity, EVs and PHEV are more and more important for automotive manufactures. Normally for EVs and PHEV there are two important key parts, which are battery package and power electronics composing of critical components. A rechargeable battery is a quite important element for achieving cost competitiveness, which is mainly used to story energy and provide continue energy to drive an electric motor. In order to recharge battery and drive the electric motor, power electronics group is an essential bridge to convert different energy types for both of them. In modern power electronics there are many different topologies such as non-isolated and isolated power converters which can be used to implement for charging battery. One of most used converter topology is multiphase interleaved power converter, pri- marily due to its prominent advantages, which is frequently employed to obtain optimal dynamic response, high effciency and compact converter size. Concerning its usage, many detailed investigations regarding topology, control strategy and devices have been done. In this thesis, the core research is to investigate some branched contents in term of issues analysis and optimization approaches of building magnetic component. This work starts with an introduction of reasons of developing EVs and PEHV and an overview of different possible topologies regarding specific application requirements. Because of less components, high reliability, high effciency and also no special safety requirement, non-isolated multiphase interleaved converter is selected as the basic research topology of founded W-charge project for investigating its advantages and potential branches on using optimized magnetic components. Following, all those proposed aspects and approaches are investigated and analyzed in details in order to verify constrains and advantages through using integrated coupled inductors. Furthermore, digital controller concept and a novel tapped-inductor topology is proposed for multiphase power converter and electric vehicle application.

Análisis del Proyecto Mesoaméricano y su incidencia en la integración de la Región Centroaméricana y Colombia : Período de Estudio 2001-2007

El Proyecto Mesoamericano es un proyecto de integración entre los países de Mesoamerica; es decir, que es una integración entre los nueves Estados del Sureste de México (Campeche, Chiapas, Guerrero, Oaxaca, Puebla, Quintana Roo, Tabasco, Veracruz y Yucatán)y los territorios de Guatemala, El Salvador, Belice, Honduras, Nicaragua, Costa Rica y Panamá. Aunque a partir del 2006 Colombia ingresó con todos los derechos de participación. El proyecto busca principalmente aumentar la calidad de vida de los habitantes potencializando el desarrollo económico, reduciendo la pobreza, aumentando el capital humano y natural de la región, dentro de un contexto de respeto a la diversidad cultural, étnica e inclusión social. Para esto el Proyecto Mesoamericano se ha dividido en 9 Iniciativas las cuales a cada país le corresponde desarrollar cada una. Es por esto que a México le correspondió desarrollar la Iniciativa de Desarrollo Humano; a Belice la iniciativa de Turismo; a Guatemala la Iniciativa Energética; a El Salvador, Telecomunicaciones; a Costa Rica, Transporte; a Honduras Facilitación Comercial y Competitividad; a Nicaragua, Desarrollo Sostenible; a Panamá, Prevención y Mitigación de Desastres Naturales y finalmente a Colombia le correspondió desarrollar el tema de los biocombustibles. estas Iniciativas todas tienen la misma importancia pero a diferencia de las otras; la Iniciativa Energética es la más desarrollada y ejecutada hasta el momento por ser la más grande; entre sus proyectos están: El Sistema de Interconexión Eléctrica SIEPAC, la Interconexión Eléctrica entre México y Guatemala, la Interconexión Eléctrica entre Panamá y Colombia, el Proyecto de Biocombustibles y las Energías Renovables. Esta Iniciativa ha hecho que la integración entre los países de la región se afiance mucho más. Aunque todavía existe mucho rechazo por parte de la población campesina e indígena por el temor a perder sus recursos naturales y que estos sean privatizados. De igual forma Colombia es muy importante para el proyecto puesto que Colombia geoestratégicamente es el puente entre Centroamérica y Suramérica y es un factor clave para el Proyecto Mesoamericano.

Análisis y diseño para la construcción de un plan estratégico de manejo eficiente de energía en la Universidad del Rosario

De acuerdo con el Programa de la Naciones Unidas para el Medio Ambiente (PNUMA), la producción más limpia «es una estrategia ambiental preventiva integrada que se aplica a los procesos, productos y servicios a fin de aumentar la eficiencia y reducir los riesgos para los seres humanos y el ambiente.» (Programa de las Naciones Unidas para el Medio Ambiente (PNUMA), 2006) Esta estrategia es aplicable para cualquier proceso, producto o servicio y contiene diversas acciones que incluyen sencillos pasos que van desde pequeños cambios en los procedimientos operacionales de fácil e inmediata ejecución, hasta cambios mayores que impliquen la sustitución de materias primas, insumos o líneas de producción a unas más eficientes. De acuerdo con la investigación realizada, se formuló un plan estratégico de PML para la Universidad del Rosario que permita la conservación de las materias primas, como el agua y el manejo energético eficiente, la reducción de las materias primas toxicas, en cuanto a toxicidad y cantidad, y la reducción de emisiones y residuos que van al agua y a la atmósfera impactando el entorno a causa de los procesos que se desarrollan en la Universidad para la prestación de sus servicios. En este orden de ideas, la Producción más Limpia implementada en la Universidad requiere que se modifiquen ciertas actitudes, el desarrollo de una gestión ambiental responsable, la creación de políticas convenientes y la evaluación de nuevas opciones tecnologías que impacten de manera positiva su implementación a través de las siguientes técnicas: • Mejoras en el proceso • Buenas prácticas operativas • Mantenimiento de equipos • Reutilización y reciclaje • Cambios en la materia prima • Cambios en la tecnología De esta manera los resultados presentarán un modelo transformador para la Institución, que permita su perdurabilidad, convirtiéndola en una Universidad pionera capaz de disminuir su impacto de operaciones en la sociedad.

Soluções sólidas vs. dispersões sólidas: impacto dos parâmetros de formulação

Filmes matriciais foram preparados com fármacos com diferentes solubilidades aquosas (tartarato de metoprolol, ibuprofeno e diclofenac Na) e diferentes polímeros (etilcelulose, Eudragit RS e Eudragit RL). Foram obtidas soluções sólidas (fármaco dissolvido) e dispersões sólidas (fármaco disperso). A libertação dos fármacos foi estudada em função do tipo de fármaco, doseamento, tipo e quantidade de aditivo e do tipo de polímero. A libertação dos fármacos não foi de acordo com a sua solubilidade aquosa, mas sim com o estado físico do fármaco na matriz. O incremento do conteúdo do fármaco na matriz aumentou a velocidade de libertação monotonicamente para a solução sólida. Em contraste, com a dispersão sólida, o aumento da dosagem de fármaco não originou quase nenhum efeito até 30 %, registando-se apenas, posteriormente, um acréscimo na sua velocidade. A inclusão de aditivos hidrofílicos aumentou principalmente a fase inicial do perfil de libertação do fármaco e não produziu efeito no plateau. Por outro lado, polietilenoglicol 1500 diminuiu a libertação de diclofenac Na devido ao aprisionamento do fármaco nos seus domínios. O efeito do tipo de polímero na libertação de ibuprofeno esteve relacionado com a partição do fármaco com o polímero. No caso do tartarato de metoprolol, a libertação foi muito mais rápida do da matriz de Eudragit RS do que de EC, devido à formação de uma mistura amorfa.