Fluctuation characteristics of arc voltage and jet flow in a non-transferred dc plasma generated at reduced pressure

A torch with a set of inter-electrode inserts between the cathode and the anode/nozzle with a wide nozzle exit was designed to generate plasma jets at chamber pressures of 500–10 000 Pa. The variation of the arc voltage was examined with the change in working parameters such as gas flow rate and chamber pressure. The fluctuation in the arc voltage was recorded with an oscilloscope, and the plasma jet fluctuation near the torch exit was observed with a high-speed video camera and detected with a double-electrostatic probe. Results show that the 300 Hz wave originated from the tri-phase rectified power supply was always detected under all generating conditions. Helmholtz oscillations over 3000 Hz was detected superposed on the 300 Hz wave at gas flow rates higher than 8.8 slm with a peak to valley amplitude lower than 5% of the average voltage value. No appreciable voltage fluctuation caused by the irregular arc root movement is detected, and mechanisms for the arc voltage and jet flow fluctuations are discussed.

The formation mechanism of low leaching glassy slag during plasma arc vitrification treatment of fly ash

In this paper, the glass formation theory is applied to study the formation mechanism of the low leaching glassy slag during the process of plasma waste treatment. The research shows that SiO2 acts as network former to form a 3-dimensional Si-O tetrahedral network in which heavy metals are bonded or encapsulated, so the Si-O tetrahedron protect heavy metals against leaching from the vitrified slag or acid corrosion. For given chemical compositions of waste, the formation ability of the vitrified slag can be represented by the ratio of the whole oxygen ions to the whole network former ions in glass (O/Si) which is appropriate in the range of 2~3. A plasma arc reactor is used to conduct the vitrification experiments of two kinds of fly ashes with additives in which effects of various parameters including arc power, cooling speed, treatment temperature are studied. The chemical compositions of fly ashes are analyzed by X-ray fluorescence (XRF) spectrometry. The experimental results show that both cooling speed and O/Si have important influence on the formation of the vitrified slag, which is qualitatively in accordance with the predictions of the glass formation theory.

THE FORMATION MECHANISM OF THE VITRIFIED SLAG IN A PLASMA ARC REACTOR FOR HAZARDOUS WASTE TREATMENT

Various hazardous wastes with additives have been vitrified to investigate the formation mechanism of the glassy slag by a 30 kW DC plasma-arc reactor developed by the Institute of Mechanics, Chinese Academy of Sciences. The average temperature in the reaction area is controlled at 1500°C. The chemical compositions of three sorts of fly ashes are analyzed by XRF (X-Ray Fluorescence). Fly ashes with vitrifying additives can be vitrified to form glassy slag, which show that the ratio of the whole oxygen ions to the whole network former ions in glass (R) is appropriate in the range of 2~3 to form durable vitrified slag. In this experiment, the arc power is controlled below 5 kW to inhibit waste evaporation. To enhance the effects of heat transfer to wastes, ferrous powder has been added into the graphite crucible, which aggregates as ingot below the molten silicate after vitrification. The slag fails to form glass if the quenching rate is less than 1 K/min. Therefore, the slag will break into small chips due to the sharp quenching rate, which is more than 100 K/sec.

Development of arc root attachment in the nozzle of 1 kW N2 and H2-N2 arcjet thrusters

Arc root behavior affects the energy transfer and nozzle erosion in an arcjet thruster. To investigate the development of arc root attachment in 1 kW class N2 and H2-N2 arcjet thrusters from the time of ignition to the stably working condition, a kinetic series of end-on view images of the nozzle obtained by a high-speed video camera was analyzed. The addition of hydrogen leads to higher arc voltage levels and the determining factor for the mode of arc root attachment was found to be the nozzle temperature. At lower nozzle temperatures, constricted type attachment with unstable motions of the arc root was observed, while a fully diffused and stable arc root was observed at elevated nozzle temperatures.

A small arc-heated plasma testing facility for thermal protection materials

Experimental research on a 150 kW arc-heated plasma testing facility was conducted. Stable plasma jets with different gas compositions, temperatures and velocities were obtained at chamber pressure between 400 Pa – 100 kPa. Stagnation ablation experiments were conducted on samples of typical super alloys used for thermal protection systems. The microstructure and hardness of alloys before and after ablation were compared.

Methods for melting temperature calculation

Melting temperature calculation has important applications in the theoretical study of phase diagrams and computational materials screenings. In this thesis, we present two new methods, i.e., the improved Widom's particle insertion method and the small-cell coexistence method, which we developed in order to capture melting temperatures both accurately and quickly.

We propose a scheme that drastically improves the efficiency of Widom's particle insertion method by efficiently sampling cavities while calculating the integrals providing the chemical potentials of a physical system. This idea enables us to calculate chemical potentials of liquids directly from first-principles without the help of any reference system, which is necessary in the commonly used thermodynamic integration method. As an example, we apply our scheme, combined with the density functional formalism, to the calculation of the chemical potential of liquid copper. The calculated chemical potential is further used to locate the melting temperature. The calculated results closely agree with experiments.

We propose the small-cell coexistence method based on the statistical analysis of small-size coexistence MD simulations. It eliminates the risk of a metastable superheated solid in the fast-heating method, while also significantly reducing the computer cost relative to the traditional large-scale coexistence method. Using empirical potentials, we validate the method and systematically study the finite-size effect on the calculated melting points. The method converges to the exact result in the limit of a large system size. An accuracy within 100 K in melting temperature is usually achieved when the simulation contains more than 100 atoms. DFT examples of Tantalum, high-pressure Sodium, and ionic material NaCl are shown to demonstrate the accuracy and flexibility of the method in its practical applications. The method serves as a promising approach for large-scale automated material screening in which the melting temperature is a design criterion.

We present in detail two examples of refractory materials. First, we demonstrate how key material properties that provide guidance in the design of refractory materials can be accurately determined via ab initio thermodynamic calculations in conjunction with experimental techniques based on synchrotron X-ray diffraction and thermal analysis under laser-heated aerodynamic levitation. The properties considered include melting point, heat of fusion, heat capacity, thermal expansion coefficients, thermal stability, and sublattice disordering, as illustrated in a motivating example of lanthanum zirconate (La₂Zr₂O₇). The close agreement with experiment in the known but structurally complex compound La₂Zr₂O₇ provides good indication that the computation methods described can be used within a computational screening framework to identify novel refractory materials. Second, we report an extensive investigation into the melting temperatures of the Hf-C and Hf-Ta-C systems using ab initio calculations. With melting points above 4000 K, hafnium carbide (HfC) and tantalum carbide (TaC) are among the most refractory binary compounds known to date. Their mixture, with a general formula Ta_xHf_1-xC_y, is known to have a melting point of 4215 K at the composition Ta₄HfC₅, which has long been considered as the highest melting temperature for any solid. Very few measurements of melting point in tantalum and hafnium carbides have been documented, because of the obvious experimental difficulties at extreme temperatures. The investigation lets us identify three major chemical factors that contribute to the high melting temperatures. Based on these three factors, we propose and explore a new class of materials, which, according to our ab initio calculations, may possess even higher melting temperatures than Ta-Hf-C. This example also demonstrates the feasibility of materials screening and discovery via ab initio calculations for the optimization of "higher-level" properties whose determination requires extensive sampling of atomic configuration space.

An investigation of various types of arc welded joints

In the last few years there has been much discussion as to the relative merits or arc welded joints as compared to riveted joints. There is an old precedent which must be removed before arc welding will come into its own. The purpose of this paper is to help establish confidence in this process of fabrication with special regard to strength and reliability.

A short thesis on arc-welding

During the past few years the attention of architects, engineers and others encased in or connected with the building industry has been attracted to the possibilities of the application of welding processes to the joining of structural members. As oxy-acetylene welding was developed before electric arc welding became perfected it was only natural that the gas torch should be first considered. It developed however on examination of the two processes that while acetylene welding gave better results in most cases it was only in the hands of experts that it could consistently outscore the arc as a welding medium. Arc-welding has the advantage over the acetylene process, where each individual operator must use his own judgement as to the proper flame, in that a squad of arc-welders can work under the direction of a single expert supervisor who accepts the responsibility of fixing the current value and of determining the proper size of welding rod to be used on any given type of work.

Petrologia dos diabásios da região de Angra dos Reis, RJ

O tema abordado nesta dissertação de mestrado é a petrogênese dos diabásios do Eocretáceo que integram o Enxame de Diques da Serra do Mar na região de Angra dos Reis (RJ). Estes diques intrudem rochas do Terreno Ocidental e do Arco Magmático Rio Negro, inserindo-se no contexto geodinâmico de fragmentação do Gondwana no Cretáceo Inferior. Essas intrusões são subverticais e orientam-se preferencialmente a N039E. Intrusões retilíneas são as mais observadas em campo. Os diabásios são compostos, essencialmente, por plagioclásio e clinopiroxênios (augita e pigeonita). Quartzo, minerais opacos, apatita e olivina ocorrem como minerais acessórios. A composição mineral secundária é marcada pela presença de biotita, uralita e saussurita. Os diabásios estudados compreendem uma série transicional com afinidade toleítica. Os estudos petrológicos revelam a existência de cinco suítes de alto-TiO2, tendo sido as mesmas discriminadas com base nas razões La/Yb de amostras com o mesmo teor de MgO. Destas, apenas a suíte 2 têm quantidade mínima de amostras para avaliação de processos evolutivos. O resultado da modelagem petrogenética aponta que o processo evolutivo mais provável para a geração dos diabásios da suíte 2 é cristalização fracionada sem mudança na assembleia fracionante. As amostras representativas dos líquidos parentais das cinco suítes apresentam razões La/Nb e La/Yb maiores que a unidade, típicas de derivação de fonte enriquecida, que, em várias províncias basálticas continentais, tem sido associada à fusão exclusiva do manto litosférico subcontinental ou a sua participação em processos de mistura de fontes. A discriminação de fontes mantélicas foi feita exclusivamente com base nos teores de elementos traços de amostras representativas de líquidos parentais das cinco suítes discriminadas na área de estudo. Os modelos indicam que todas as cinco suítes estudadas estão relacionadas a fontes harzburgíticas com granada residual. A suíte 5 da área de estudo não pode ser associada à mesma fonte mantélica geradora das suítes 1, 2, 3 e 4 que, por sua vez, se originaram por diferentes quantidades de fusão parcial (respectivamente, 44%, 35%, 31% e 25%) de uma mesma fonte. Cabe ressaltar que a ocorrência de duas suítes, com razões La/Yb muito distintas, porém geograficamente muito próximas, sugere que processos de heterogeneidade mantélica, tipicamente laterais, devem também ocorrer verticalmente.

Modelization and analysis of the electric arc in low voltage circuit breakers

246 p.

Effects of melting temperature on the broadband infrared luminescence of bi-doped and Bi/Dy co-doped chalcohalide glasses

Bismuth (Bi)-doped and Bi/Dy co-doped chalcohalide glasses are investigated as promising materials for amplifiers in optical communication. The samples synthesized at lower melting temperatures (MTs) are characterized by more intensified infrared emissions. With respect to the redox process of a liquid mixture at different MTs, we attribute an emission at 1230 nm to low-valent Bi ions. The lower MT favors the formation of LVB ions, i.e. Bi+ or Bi2+, while the higher MT promotes the production of higher-valent Bi ions Bi3+. An enhanced broadband infrared luminescence with the full-width at half-maximum over 200 nm is achieved from the present Bi/Dy co-doped chalcohalide glasses.

Petrogênese das rochas máficas alcalinas do litoral entre São Sebastião (SP) e Parati (RJ)

Lamprófiros e diabásios alcalinos afloram no litoral dos estados de São Paulo e Rio de Janeiro e integram o Enxame de Diques da Serra do Mar (EDSM). Essas rochas ocorrem sob a forma de diques e intrudem o Orógeno Ribeira, de idade Neoproterozóica/Cambro-Ordoviciana, inserindo-se no contexto geodinâmico de abertura do Oceano Atlântico Sul durante o Cretáceo Superior. Essas intrusões são subverticais e orientam-se preferencialmente a NE-SW, seguindo a estruturação das rochas encaixantes. Os lamprófiros são classificados como monchiquitos e camptonitos e exibem, respectivamente, textura hipocristalina e holocristalina. Apresentam também textura panidiomórfica, fenocristais de clinopiroxênio e olivina, imersos em matriz formada essencialmente por esses mesmos minerais, além de biotita, kaersutita e minerais opacos. O camptonito apresenta ainda plagioclásio na matriz. Os diabásios alcalinos são hipocristalinos a holocristalinos, equigranulares a inequigranulares, com fenocristais de olivina e/ou clinopiroxênio e/ou plagioclásio, em uma matriz composta essencialmente por esses minerais. As rochas estudadas caracterizam séries alcalinas miaskíticas, com os lamprófiros sendo tanto sódicos, potássicos e ultrapotássicos e os diabásios alcalinos como predominantemente sódicos. Modelagens petrogenéticas envolvendo possíveis processos evolutivos mostram que é improvável que os lamprófiros sejam cogenéticos por processos evolutivos envolvendo tanto cristalização fracionada, com ou sem assimilação concomitante, quanto hibridização. O mesmo ocorre para os diabásios alcalinos. A discriminação de fontes mantélicas foi feita com base nos teores de elementos traços de amostras representativas de líquidos parentais e indica que esse magmatismo alcalino está relacionado a fontes lherzolíticas com fusão parcial na zona de estabilidade do espinélio, isto é, a poucas profundidades. Os dados litogeoquímicos e isotópicos do sistema Sr-Nd das rochas estudadas sugerem tanto o envolvimento de fontes férteis, associadas ao manto sublitosférico, quanto de fontes enriquecidas, relacionadas ao manto litosférico subcontinental. Modelagens de mistura binária revelam que a petrogênese dos lamprófiros e diabásios alcalinos envolveu uma grande participação de um componente fértil misturado com contribuições menores de um componente enriquecido. Idades TDM (760-557 Ma) obtidas sugerem remobilização do manto litosférico no Neoproterozóico, talvez relacionadas à subducção da Placa São Francisco preteritamente à colisão do Orógeno Ribeira. Altas razões CaO/Al2O3 para os líquidos lamprofíricos menos evoluídos, altos teores de Zr, correlações negativas Zr/Hf e Ti/Eu e associação com carbonatitos indicam condições metassomáticas de alto CO2/H2O. Em escala local, modelos geodinâmicos baseados na astenosfera não isotérmica parecem mais aplicáveis. No entanto, modelos geodinâmicos baseados na astenosfera isotérmica (com o envolvimento de plumas) parecem mais indicados num contexto regional, considerando-se outras províncias alcalinas contemporâneas e correlatas.