Towards a Critique of the Concept of the Right to Self-Determination in Africa : A Conceptual Examination and the Cases of Western Sahara, Southern Sudan and Eritrea

This thesis examines the right to self-determination which is a norm used for numerous purposes by multiple actors in the field of international relations, with relatively little clarity or agreement on the actual and potential meaning of the right. In international practice, however, the main focus in applying the right has been in the context of decolonization as set by the United Nations in its early decades. Thus, in Africa the right to self-determination has traditionally implied that the colonial territories, and particularly the populations within these territories, were to constitute the people who were entitled to the right. That is, self-determination by decolonization provided a framework for the construction of independent nation-states in Africa whilst other dimensions of the right remained largely or totally neglected. With the objective of assessing the scope, content, developments and interpretations of the right to self-determination in Africa, particularly with regard to the relevance of the right today, the thesis proceeds on two fundamental hypotheses. The first is that Mervyn Frost s theory of settled norms, among which he lists the right to self-determination, assumes too much. Even if the right to self-determination is a human right belonging to all peoples stipulated, inter alia, in the first Article of the 1966 International Human Rights Covenants, it is a highly politicized and context-bound right instead of being settled and observed in a way that its denial would need special justification. Still, the suggested inconsistency or non-compliance with the norm of self-determination is not intended to prove the uselessness or inappropriateness of the norm, but, on the contrary, to invite and encourage debate on the potential use and coverage of the right to self-determination. The second hypothesis is that within the concept of self-determination there are two normative dimensions. One is to do with the idea and practice of statehood, the nation and collectivity that may decide to conduct itself as an independent state. The other one is to do with self-determination as a human right, as a normative condition, to be enjoyed by people and peoples within states that supersedes state authority. These external and internal dimensions need to be seen as complementary and co-terminous, not as mutually exclusive alternatives. The thesis proceeds on the assumption that the internal dimension of the right, with human rights and democracy at its core, has not been considered as important as the external. In turn, this unbalanced and selective interpretation has managed to put the true normative purpose of the right making the world better and bringing more just polity models into a somewhat peculiar light. The right to self-determination in the African context is assessed through case studies of Western Sahara, Southern Sudan and Eritrea. The study asks what these cases say about the right to self-determination in Africa and what their lessons learnt could contribute to the understanding and relevance of the right in today s Africa. The study demonstrates that even in the context of decolonization, the application of the right to self-determination has been far from the consistent approach supposedly followed by the international community: in many respects similar colonial histories have easily led to rather different destinies. While Eritrea secured internationally recognized right to self-determination in the form of retroactive independence in 1993, international recognition of distinct Western Sahara and Southern Sudan entities is contingent on complex and problematic conditions being satisfied. Overall, it is a considerable challenge for international legality to meet empirical political reality in a meaningful way, so that the universal values attached to the norm of self-determination are not overlooked or compromised but rather reinforced in the process of implementing the right. Consequently, this thesis seeks a more comprehensive understanding of the right to self-determination with particular reference to post-colonial Africa and with an emphasis on the internal, human rights and democracy dimensions of the norm. It is considered that the right to self-determination cannot be perceived only as an inter-state issue as it is also very much an intra-state issue, including the possibility of different sub-state arrangements exercised under the right, for example, in the form of autonomy. At the same time, the option of independent statehood achieved through secession remains a mode of exercising and part of the right to self-determination. But in whatever form or way applied, the right to self-determination, as a normative instrument, should constitute and work as a norm that comprehensively brings more added value in terms of the objectives of human rights and democracy. From a normative perspective, a peoples right should not be allowed to transform and convert itself into a right of states. Finally, in light of the case studies of Western Sahara, Southern Sudan and Eritrea, the thesis suggests that our understanding of the right to self-determination should now reach beyond the post-colonial context in Africa. It appears that both the questions and answers to the most pertinent issues of self-determination in the cases studied must be increasingly sought within the postcolonial African state rather than solely in colonial history. In this vein, the right to self-determination can be seen not only as a tool for creating states but also as a way to transform the state itself from within. Any such genuinely post-colonial approach may imply a judicious reconsideration, adaptation or up-dating of the right and our understanding of it in order to render it meaningful in Africa today.

Regional Integration and the State : The Changing Nature of Sovereignty in Southern Africa and Europe

The study explores the role of the state in regional integration processes. The question is approached through theoretical discussion and two case-studies - SADC (Southern African Development Community) and the EU. The main research question of the study is, what are the possibilities and problems of the integration process in Southern Africa and how do they differ from the possibilities and problems of the integration process in Europe. The undelrying question of the study is why do states decide to participate in an integration process where they have to limit their sovereignty. Review of the theoretical discussion of the integration studies shows that the integration process is affected by several factors on different levels of the international system. But the state plays a central role in integration processes - integration processes are inititated and carried on by the participatig states. The European integration process shows that the interests of the state can change over time. At the beginning of the integration process, the objective was to strengthen participating states. Later EU member states have decided that it is in their interest to deepen the process even if it has meant limitation of their sovereignty. The determinant factor has been that the member states have considered it to be in their interst to deepen the process. In Southern Africa the integration process is only at the beginning. SADC aims to establish a free trade area by 2008. The biggest challenge is how to implement the integration process so that it benefits all member states in a region that is economically dominated by South Africa. In practice this can be achieved through establishment of corrective mechanisms, which ensure equitable distribution of benefits. This would require deeper integration and South Africa to adapt responsibility towards its regional partners. African integration processes in general have not been as successful as for example the EU. African states have been reluctant to limit their sovereignty in favour of regional organisations.This can be explained by the differences between European and African states. The EU member states have been democracies while African states have been characterised by concentration of power in the executive branch. Furthermore the political systems in Africa have been characterised by vertical clientelist reltionships. As a result it has not been in the interest of the political elite to limit the state sovereignty in favour of regional organisations. In recent years SADC has been relatively succesful in its integration process and reforms, but a lot remains to be done before the implementation of the free trade area can be succesful. The institutional structure and treaties of SADC differ from the structures of the EU. Member states are the main actors of the integration processes. Their differences are reflected in the process and produce different kinds of integration in different parts of the world.

Genetic studies of the PRP17 gene of Saccharomyces cerevisiae: a domain essential for function maps to a nonconserved region of the protein

The PRP17 gene product is required for the second step of pre-mRNA splicing reactions. The C-terminal half of this protein bears four repeat units with homology to the beta transducin repeat. Missense mutations in three temperature-sensitive prp17 mutants map to a region in the N-terminal half of the protein. We have generated, in vitro, 11 missense alleles at the beta transducin repeat units and find that only one affects function in vivo. A phenotypically silent missense allele at the fourth repeat unit enhances the slow-growing phenotype conferred by an allele at the third repeat, suggesting an interaction between these domains. Although many missense mutations in highly conserved amino acids lack phenotypic effects, deletion analysis suggests an essential role for these units. Only mutations in the N-terminal nonconserved domain of PRP17 are synthetically lethal in combination with mutations in PRP16 and PRP18, two other gene products required for the second splicing reaction. A mutually allele-specific interaction between Prp17 and snr7, with mutations in U5 snRNA, was observed. We therefore suggest that the functional region of Prp17p that interacts with Prp18p, Prp16p, and U5 snRNA is the N terminal region of the protein.

Financial liberalization and sectoral reallocation of capital in South Africa

We examine the impact of financial reforms on efficient reallocation of capital within and between sectors in South Africa using firm-level panel data for the period 1991–2008. The measure of efficient allocation of capital is based on the Tobin’s Q. We find that financial reforms are associated with improvements in within-sector, but not between-sector allocation of capital. These results imply that for South Africa to unleash the potential for take-off that is often associated with reallocation of resources from the primitive to modern sectors, reforms that focus beyond the financial sector are necessary. While more research is necessary to determine what would fully constitute such additional reforms, our analysis shows that reforms that improve the quality of economic institutions may be a step in the right the direction.

Towards a United States of Africa? Combining Zambian and AU level debate.

Globalisaatio on luonut uuden maailmanjärjestelmän jonka myötä yksittäisten valtioiden vaikutusvalta on vähentynyt entisestään. Tämä pitää paikkansa erityisesti kehittyvien maiden kohdalla, esimerkiksi Afrikassa. Afrikka on pyrkinyt taistelemaan globalisaation tuomia negatiivisia vaikutuksia vastaan alueellistumisen ja maanosan yhtenäisyyttä ajavien hankkeiden kautta jo vuosikymmenien ajan, mutta toistaiseksi tulokset eivät ole olleet vakuttavia. Tällä hetkellä Afrikan Unionissa keskustellaan hankkeesta muodostaa Afrikan Yhdysvallat. Aiemmista hankkeista poiketen tämän uuden aloitteen ajatus perustuu ylikansallisuudelle, jossa yksittäiset valtiot luovuttavat valtaansa ylikansallisille elimille, kuten Afrikan Unionin hallitukselle. Näin ollen on tärkeää tarkastella aloitetta Afrikan Yhdysvaltojen perustamiseksi ja arvioida, voisiko tällainen ylikansallinen organisaatio auttaa Afrikkaa kääntämään globalisaation haittavaikutukset myönteisiksi. Tämä Pro Gradu-tutkielma väittää sen olevan mahdollista, mutta vain siinä tapauksessa että Afrikka on valmis hyväksymään yhtenäisyyden rajoitukset. Aiemman tutkimuksen vähyyden vuoksi on myös tarpeen tutkia Afrikan Yhdysvalloista kansallisilla tasoilla käytävää keskustelua. Tämän vuoksi tässä tutkielmassa painotetaan esimerkkimaa Sambian kautta yhden Afrikan Unionin jäsenmaan keskinäistä keskustelua aiheesta ja verrataan sitä Afrikan Unionin tason keskusteluun. Tutkielma sisältää kirjallisuuskatsauksen sekä tapaustutkimuksen. Tutkimusaineisto koostuu sambialaisista sanomalehtiotteista sekä Sambian valtion ja Afrikan Unionin virallisista asiakirjoista. Pääasiallisena tutkimusmenetelmänä on laadullinen sisällönanalyysi. Teoreettinen viitekehys perustuu afrikkalaisen valtion ja kansalaisyhteiskunnan, alueellistumisen, globalisaation hallinnan, pan-afrikkalaisuuden ja poliittisen integraation teorioihin sekä historialliseen katsaukseen Afrikan yhtenäisyydestä. Perimmäisenä tarkoituksena on lisätä ymmärrystä afrikkalaisesta valtiosta ja politiikasta. Tutkimuksen tulosten mukaan on havaittavissa aukko valtioiden virallisten toimijoiden näkemysten ja kansalaisyhteiskunnan huolenaiheiden välillä. Viralliset toimijat näyttävät olevan kansalaisyhteiskuntaa vahvemmin Afrikan Yhdysvaltojen kannalla. Virallisten toimijoiden korostaessa Afrikan aatteellista yhtenäisyyttä kansalaisyhteiskunta on huolissaan sen toteutumisesta käytännössä. Esiin nousee myös kysymys 'afrikkalaisesta' identiteetistä ja kansalaisuudesta sekä kommunikaatiosta valtion ja kansalaisten välillä.

Semi-supervised learning of WLAN radio maps

In this thesis a manifold learning method is applied to the problem of WLAN positioning and automatic radio map creation. Due to the nature of WLAN signal strength measurements, a signal map created from raw measurements results in non-linear distance relations between measurement points. These signal strength vectors reside in a high-dimensioned coordinate system. With the help of the so called Isomap-algorithm the dimensionality of this map can be reduced, and thus more easily processed. By embedding position-labeled strategic key points, we can automatically adjust the mapping to match the surveyed environment. The environment is thus learned in a semi-supervised way; gathering training points and embedding them in a two-dimensional manifold gives us a rough mapping of the measured environment. After a calibration phase, where the labeled key points in the training data are used to associate coordinates in the manifold representation with geographical locations, we can perform positioning using the adjusted map. This can be achieved through a traditional supervised learning process, which in our case is a simple nearest neighbors matching of a sampled signal strength vector. We deployed this system in two locations in the Kumpula campus in Helsinki, Finland. Results indicate that positioning based on the learned radio map can achieve good accuracy, especially in hallways or other areas in the environment where the WLAN signal is constrained by obstacles such as walls.

Future chemistry teachers use of knowledge dimensions and high-order cognitive skills in pre-laboratory concept maps

This poster describes a pilot case study, which aim is to study how future chemistry teachers use knowledge dimensions and high-order cognitive skills (HOCS) in their pre-laboratory concept maps to support chemistry laboratory work. The research data consisted of 168 pre-laboratory concept maps that 29 students constructed as a part of their chemistry laboratory studies. Concept maps were analyzed by using a theory based content analysis through Anderson & Krathwohls' learning taxonomy (2001). This study implicates that novice concept mapper students use all knowledge dimensions and applying, analyzing and evaluating HOCS to support the pre-laboratory work.

Enhancement of workability in AZ31 alloy-processing maps: Part I,castmaterial

Processing maps developed on the basis of the Dynamic Materials Model provide valuable information that might help the metal working industry in solving problems related to workability and microstructural control in commercial alloys. In this research, the processing maps for an as-cast AZ31 magnesium alloy are presented. The results are validated via microstructural observations, clearly delineating safe and unsafe regimes for further process design of this alloy.

High temperature deformation processing maps for boron modified Ti-6Al-4V alloys

The alloy, Ti-6Al-4V is an alpha + beta Ti alloy that has large prior beta grain size (similar to 2 mm) in the as cast state. Minor addition of B (about 0.1 wt.%) to it refines the grain size significantly as well as produces in-situ TiB needles. The role played by these microstructural modifications on high temperature deformation processing maps of B-modified Ti64 alloys is examined in this paper.Power dissipation efficiency and instability maps have been generated within the temperature range of 750-1000 degrees C and strain rate range of 10(-3)-10(+1) s(-1). Various deformation mechanisms, which operate in different temperature-strain rate regimes, were identified with the aid of the maps and complementary microstructural analysis of the deformed specimens. Results indicate four distinct deformation domains within the range of experimental conditions examined, with the combination of 900-1000 degrees C and 10(-3)-10(-2) s(-1) being the optimum for hot working. In that zone, dynamic globularization of alpha laths is the principle deformation mechanism. The marked reduction in the prior beta grain size, achieved with the addition of B, does not appear to alter this domain markedly. The other domains, with negative values of instability parameter, show undesirable microstructural features such as extensive kinking/bending of alpha laths and breaking of beta laths for Ti64-0.0B as well as generation of voids and cracks in the matrix and TiB needles in the B-modified alloys. (C) 2010 Elsevier B.V. All rights reserved.

Constructing Reeb Graphs using Cylinder Maps

The Reeb graph of a scalar function represents the evolution of the topology of its level sets. In this video, we describe a near-optimal output-sensitive algorithm for computing the Reeb graph of scalar functions defined over manifolds. Key to the simplicity and efficiency of the algorithm is an alternate definition of the Reeb graph that considers equivalence classes of level sets instead of individual level sets. The algorithm works in two steps. The first step locates all critical points of the function in the domain. Arcs in the Reeb graph are computed in the second step using a simple search procedure that works on a small subset of the domain that corresponds to a pair of critical points. The algorithm is also able to handle non-manifold domains.

Design of Single-Input-Single-Output Compliant Mechanisms for Practical Applications Using Selection Maps

We present an interactive map-based technique for designing single-input-single-output compliant mechanisms that meet the requirements of practical applications. Our map juxtaposes user-specifications with the attributes of real compliant mechanisms stored in a database so that not only the practical feasibility of the specifications can be discerned quickly but also modifications can be done interactively to the existing compliant mechanisms. The practical utility of the method presented here exceeds that of shape and size optimizations because it accounts for manufacturing considerations, stress limits, and material selection. The premise for the method is the spring-leverage (SL) model, which characterizes the kinematic and elastostatic behavior of compliant mechanisms with only three SL constants. The user-specifications are met interactively using the beam-based 2D models of compliant mechanisms by changing their attributes such as: (i) overall size in two planar orthogonal directions, separately and together, (ii) uniform resizing of the in-plane widths of all the beam elements, (iii) uniform resizing of the out-of-plane thick-nesses of the beam elements, and (iv) the material. We present a design software program with a graphical user interface for interactive design. A case-study that describes the design procedure in detail is also presented while additional case-studies are posted on a website. DOI:10.1115/1.4001877].

Characterization of hot deformation behavior of brasses using processing maps: Part II. β Brass and α-β brass

The hot deformation behaviors of β brass in the temperature range of 550°C to 800°C and α-β brass in the temperature range of 450°C to 800°C have been characterized in the strain rate range of 0.001 to 100 s−1 using processing maps developed on the basis of the Dynamic Materials Model. The map for β brass revealed a domain of superplasticity in the entire temperature range and at strain rates lower than 1 s−1, with a maximum efficiency of power dissipation of about 68 pct. The temperature variation of the efficiency of power dissipation in the domain is similar to that of the diffusion coefficient for zinc in β brass, confirming that the diffusion-accommodated flow controls the superplasticity. The material undergoes microstructural instability in the form of adiabatic shear bands and strain markings at temperatures lower than 700°C and at strain rates higher than 10 s−1. The map for α-β brass revealed a wide domain for processing in the temperature range of 550°C to 800°C and at strain rates lower than 1 s−1, with a maximum efficiency of 54 pct occurring at about 750°C and 0.001 s−1. In the domain, the α phase undergoes dynamic recrystallization and controls the hot deformation of the alloy, while the β phase deforms superplastically. At strain rates greater than 1 s−1, α-β brass exhibits microstructural instabilities manifested as flow rotations at lower temperatures and localized shear bands at higher temperatures.