Evaluation of Non-Survey International IO Construction Methods with the Asian-Pacific Input-Output Table

This paper presents four non-survey methods to construct a full-information international input-output table from national IO tables and international import and export statistics, and this paper tests these four methods against the semi-survey international IO table for nine East-Asian countries and the USA, which is constructed by the Institute of Developing Economies in Japan. The tests show that the impact on the domestic flows of using self-sufficiency ratios is small, except for Singapore and Malaysia, two countries with large volumes of smuggling and transit trade. As regards the accuracy of the international flows, all methods show considerable errors, of 10%-40% for commodities and of 10%-70% for services. When more information is added, i.e. going from Method 1 to 4, the accuracy increases, except for Method 2 that generally produces larger errors than Method 1. In all, it seems doubtful whether replacing the semi-survey Asian-Pacific IO table with one of the four non-survey tables is justified, except when the semi-survey table itself is also considered to be just another estimate.

Has Low Productivity Constrained Competitiveness of African Firms? : Comparison of the Firm Performances with Asian Firms

It has been argued that poor productive performance is one of critical sources of stagnation of the African manufacturing sector, but firm-level empirical supports are limited. Using the inter-regional firm data of the garment industry, technical efficiency and its contribution to competitiveness measured as unit costs were compared between Kenyan and Bangladeshi firms. Our estimates indicated that there is no significant gap in the average technical efficiency of the two industries despite conservative estimation, although unit costs greatly differ between the two industries. Higher unit cost in Kenyan firms mainly stems from high labour cost, while impact of inefficiency is quite small. Productivity accounts little for the stagnation of garment industry in several African countries.

Empirical global value chain analysis in electronics and automobile industries :An application of Asian international input-output tables

This study aims to examine the international value distribution structure among major East Asian economies and the US. The mainstream trade theory explains the gains from trade; however, global value chain (GVC) approach emphasises uneven benefits of globalization among trading partners. The present study is mainly based on this view, examining which economy gains the most and which the least from the East Asian production networks. Two key industries, i.e., electronics and automobile, are our principle focus. Input-output method is employed to trace the creation and flows of value-added within the region. A striking fact is that some ASEAN economies increasingly reduce their shares of value-added, taken by developed countries, particularly by Japan. Policy implications are discussed in the final section.

Asian Industrial Development from the Perspective of the Motorcycle Industry

This paper discusses the diversity of industrial development among Asian countries that emerges through an investigation of the motorcycle industry despite its uniform industrial attributes. The paper then explores factors that generate diversity, focusing attention on the differences in knowledge-based assets accumulated in each country. It finds that diversity is brought about through the differences in domestic industrial resources and the capabilities of local firms. The analysis underscores each country’s intrinsic logic in industrial development, contrary to the current trend of stressing assimilation through the global production networks of multinational corporations.

Recent trends in Asian integration and Japanese participation

In East Asia, de facto integration is taking place because Free Trade Agreements (FTAs) and Economic Partnership Agreements (EPAs) are flourishing in the region. ASEAN aims to form an ASEAN Economic Community (AEC) by 2015 with the completion of the ASEAN Free Trade Area (AFTA). Surrounding countries have been competing with each other to forge FTAs or EPAs with ASEAN, including China, Japan, Korea, Australia and New Zealand, and India. As a result, ASEAN has become a trading hub in East Asia. Bilateral FTAs/EPAs are also partly in place among 16 countries (ASEAN + 6). These economic ties in trade, services and investment are accelerating this region’s development as the world’s largest production base and biggest consumption market, helping to turn around the global recession in the aftermath of the so-called Lehman Shock. However, some problems also need to be pointed out in the East Asian integration such as the spaghetti bowl effect, severe competition, labor issues, environmental destruction and power struggles.

Emergence of Asian GAPs and its relationship to global G.A.P.

Global G.A.P. is a one of the most influential private standards in the area of food safety and sustainability. With increasing impacts of Global G.A.P., many Asian countries have introduced the country versions of GAPs; China GAP, Japan GAP, Viet GAP, Thai GAP and ASEAN GAP. Each has been influenced by Global G.A.P. but ways of implementation, implementation bodies as well as focus differ from each other. This paper examines the development and motivation behind how the Asian GAPs have been introduced both from current situation and from historical perspectives. Then we compare current situation of different Asian GAPs.

Essentials in Ontology Engineering: Methodologies, Languages, and Tools

In the beginning of the 90s, ontology development was similar to an art: ontology developers did not have clear guidelines on how to build ontologies but only some design criteria to be followed. Work on principles, methods and methodologies, together with supporting technologies and languages, made ontology development become an engineering discipline, the so-called Ontology Engineering. Ontology Engineering refers to the set of activities that concern the ontology development process and the ontology life cycle, the methods and methodologies for building ontologies, and the tool suites and languages that support them. Thanks to the work done in the Ontology Engineering field, the development of ontologies within and between teams has increased and improved, as well as the possibility of reusing ontologies in other developments and in final applications. Currently, ontologies are widely used in (a) Knowledge Engineering, Artificial Intelligence and Computer Science, (b) applications related to knowledge management, natural language processing, e-commerce, intelligent information integration, information retrieval, database design and integration, bio-informatics, education, and (c) the Semantic Web, the Semantic Grid, and the Linked Data initiative. In this paper, we provide an overview of Ontology Engineering, mentioning the most outstanding and used methodologies, languages, and tools for building ontologies. In addition, we include some words on how all these elements can be used in the Linked Data initiative.

Modular extensions for modular (Logic) languages

We address the problem of developing mechanisms for easily implementing modular extensions to modular (logic) languages. By(language) extensions we refer to different groups of syntactic definitions and translation rules that extend a language. Our use of the concept of modularity in this context is twofold. We would like these extensions to be modular, in the sense above, i.e., we should be able to develop different extensions mostly separately. At the same time, the sources and targets for the extensions are modular languages, i.e., such extensions may take as input sepárate pieces of code and also produce sepárate pieces of code. Dealing with this double requirement involves interesting challenges to ensure that modularity is not broken: first, combinations of extensions (as if they were a single extensión) must be given a precise meaning. Also, the sepárate translation of múltiple sources (as if they were a single source) must be feasible. We present a detailed description of a code expansion-based framework that proposes novel solutions for these problems. We argüe that the approach, while implemented for Ciao, can be adapted for other Prolog-based systems and languages.

Independence and search space preservation in dynamically scheduled constraint logic languages

This paper performs a further generalization of the notion of independence in constraint logic programs to the context of constraint logic programs with dynamic scheduling. The complexity of this new environment made necessary to first formally define the relationship between independence and search space preservation in the context of CLP languages. In particular, we show that search space preservation is, in the context of CLP languages, not only a sufficient but also a necessary condition for ensuring that both the intended solutions and the number of transitions performed do not change. These results are then extended to dynamically scheduled languages and used as the basis for the extension of the concepts of independence. We also propose several a priori sufficient conditions for independence and also give correctness and efficiency results for parallel execution of constraint logic programs based on the proposed notions of independence.

Impact damage on selected varieties of apples, pears and other fruits.

During the past years, different laboratory impact response studies have been carrj.ec out in following fruits: apples (2 varieties), pears (4 varieties), Asian or Nashi pears (4 varieties), melons (2 varieties), peaches (2 varieties) and avocados. The methodology of the tests is described, as well as the results and observations obtained in each group of tests. Impact response is compared to bruising susceptibility, bruise characteristics (appearance and structural features) and varietal and ripeness differences.

Genes, peoples, and languages

The genetic history of a group of populations is usually analyzed by reconstructing a tree of their origins. Reliability of the reconstruction depends on the validity of the hypothesis that genetic differentiation of the populations is mostly due to population fissions followed by independent evolution. If necessary, adjustment for major population admixtures can be made. Dating the fissions requires comparisons with paleoanthropological and paleontological dates, which are few and uncertain. A method of absolute genetic dating recently introduced uses mutation rates as molecular clocks; it was applied to human evolution using microsatellites, which have a sufficiently high mutation rate. Results are comparable with those of other methods and agree with a recent expansion of modern humans from Africa. An alternative method of analysis, useful when there is adequate geographic coverage of regions, is the geographic study of frequencies of alleles or haplotypes. As in the case of trees, it is necessary to summarize data from many loci for conclusions to be acceptable. Results must be independent from the loci used. Multivariate analyses like principal components or multidimensional scaling reveal a number of hidden patterns and evaluate their relative importance. Most patterns found in the analysis of human living populations are likely to be consequences of demographic expansions, determined by technological developments affecting food availability, transportation, or military power. During such expansions, both genes and languages are spread to potentially vast areas. In principle, this tends to create a correlation between the respective evolutionary trees. The correlation is usually positive and often remarkably high. It can be decreased or hidden by phenomena of language replacement and also of gene replacement, usually partial, due to gene flow.

Ārtī:dhûā:vakhat:tredjī:sāñjījā:ćogaḍīā:5

Pīr Ṣadr ad-Dīn, Pīr Imām Shāh.

An Asian alternative? Russia's chances of making Asia an alternative to relations with the West. OSW Point of View, June 2008

Under Vladimir Putin's rule, Russia consistently and systematically expanded its activity in Asia, establishing closer political contacts with key countries in the region, rebuilding relations with former allies from Soviet times, and strengthening its presence in the Asian markets, in the energy sphere also. These activities were accompanied by intensive Russian propaganda, the message of which was that relations with the West can be restricted in favour of developing closer relations with Asian states. A justified question concerning the Russian Federation's realistic possibilities arises in this context: To what extent can it make Asia an alternative to theWest in geopolitical, economic and energy terms? Can Russia build an anti-Western alliance with Asian states? Is it able to reduce its dependence on the European market by developing its trade with Asia? Is it possible to redirect a substantial portion of Russian energy resource exports onto Asian markets? A presentation of the existing ties between Russia and theWest (here considered as the USA and the EU) will serve as a starting point for answering these questions. The following chapters will analyse Russia's opportunities in Asia in terms of geopolitical issues, the economy and energy

The European and Southeast Asian Single Aviation Markets. EU Centre, Background Brief No. 15, July 2015

Civil aviation in Europe is one major area where landmark changes have taken place since the late 1980s – the liberalization and deregulation of the sector by member states in three “packages” in the 1980s has transformed an economic sector historically characterized by heavy protectionism, collusion and strong state intervention. Today, the European Union’s (EU) aviation sector contributes to 2.4% of European GDP and supports 5.1 million jobs. The Association of Southeast Asian Nations (ASEAN) has also eagerly taken steps to integrate its aviation markets as part of the ASEAN Economic Community (AEC) in 2015. This background brief chronicles the changes made in the aviation sector in Europe through regional integration and examines how these changes have affected policymaking in member states, the airline industry and consumers. The brief also examines ASEAN’s own effort in the integration of its own aviation sector and, taking into account the EU’s strong interest in cooperating with ASEAN on transport and civil aviation policy, whether the changes in the EU are applicable in the ASEAN context.

A 300 kyr record of upwelling off Oman during the Late Quaternary: evidence of the Asian southwest monsoon

In the northwest Arabian Sea upwelling occurs each summer, driven by the strong SW monsoon winds. Upwelling results in high biological productivity and a distinctive assemblage of plankton species in the surface waters off Oman that are preserved in the sediments along the Oman continental margin, creating a geologic record of monsoon-driven upwelling. Sediments recovered from the Oman continental margin during Ocean Drilling Program leg 117 provide an opportunity to examine how upwelling has varied during the late Quaternary, spanning a longer interval than piston cores recovered prior to the ODP cruise. Variations in foraminifer shell accumulation and in the relative abundance of Globigerina bulloides indicate dominant cycles of variation at 1/100 kyr, the dominant frequency of glacial-interglacial variations, and at 1/23 kyr, the frequency of precessionally driven cycles in seasonal insolation. The strongest monsoon winds (indicated by increased upwelling) occurred during interglacial times when perihelion was aligned with the summer solstice, an orbital change that increased the insolation received during summer in the northern hemisphere. During glacial times upwelling was reduced, and although the precessional cycles were still present their amplitude was smaller. At both frequencies the upwelling cycles are in phase with minimum ice volume, evidence that glacial-interglacial climate changes also include changes to the climate system that influence the low-latitude monsoon. We attribute the decrease in the monsoon winds observed during glacial times to changes in bare land albedo over Asia and/or to changes in the areal extent and seasonal cycle in Asian snow cover that decrease the summer land-sea temperature contrast. Other mechanisms may also be involved. These new upwelling time series differ substantially from previous results, however the previous work relied on cores located farther offshore where upwelling is less intense and other physical mechanisms become important. Our results support the observations derived from atmospheric general circulation models of the atmosphere that indicate that both glacial boundary conditions, and the strength of summer insolation are important variables contributing to cycles in the monsoon winds during the late Quaternary.