Gauged thirring model in the Heisenberg picture

We consider the (2+1)-dimensional gauged Thirring model in the Heisenberg picture. In this context we evaluate the vacuum polarization tensor as well as the corrected gauge boson propagator and address the issues of generation of mass and dynamics for the gauge boson (in the limits of QED 3 and Thirring model as a gauge theory, respectively) due to the radiative corrections.

A study of the effect of overshooting deep convection on the water content of the TTL and lower stratosphere from Cloud Resolving Model simulations

Simulations of overshooting, tropical deep convection using a Cloud Resolving Model with bulk microphysics are presented in order to examine the effect on the water content of the TTL (Tropical Tropopause Layer) and lower stratosphere. This case study is a subproject of the HIBISCUS (Impact of tropical convection on the upper troposphere and lower stratosphere at global scale) campaign, which took place in Bauru, Brazil (22° S, 49° W), from the end of January to early March 2004. Comparisons between 2-D and 3-D simulations suggest that the use of 3-D dynamics is vital in order to capture the mixing between the overshoot and the stratospheric air, which caused evaporation of ice and resulted in an overall moistening of the lower stratosphere. In contrast, a dehydrating effect was predicted by the 2-D simulation due to the extra time, allowed by the lack of mixing, for the ice transported to the region to precipitate out of the overshoot air. Three different strengths of convection are simulated in 3-D by applying successively lower heating rates (used to initiate the convection) in the boundary layer. Moistening is produced in all cases, indicating that convective vigour is not a factor in whether moistening or dehydration is produced by clouds that penetrate the tropopause, since the weakest case only just did so. An estimate of the moistening effect of these clouds on an air parcel traversing a convective region is made based on the domain mean simulated moistening and the frequency of convective events observed by the IPMet (Instituto de Pesquisas Meteorológicas, Universidade Estadual Paulista) radar (S-band type at 2.8 Ghz) to have the same 10 dBZ echo top height as those simulated. These suggest a fairly significant mean moistening of 0.26, 0.13 and 0.05 ppmv in the strongest, medium and weakest cases, respectively, for heights between 16 and 17 km. Since the cold point and WMO (World Meteorological Organization) tropopause in this region lies at ∼ 15.9 km, this is likely to represent direct stratospheric moistening. Much more moistening is predicted for the 15-16 km height range with increases of 0.85-2.8 ppmv predicted. However, it would be required that this air is lofted through the tropopause via the Brewer Dobson circulation in order for it to have a stratospheric effect. Whether this is likely is uncertain and, in addition, the dehydration of air as it passes through the cold trap and the number of times that trajectories sample convective regions needs to be taken into account to gauge the overall stratospheric effect. Nevertheless, the results suggest a potentially significant role for convection in determining the stratospheric water content. Sensitivity tests exploring the impact of increased aerosol numbers in the boundary layer suggest that a corresponding rise in cloud droplet numbers at cloud base would increase the number concentrations of the ice crystals transported to the TTL, which had the effect of reducing the fall speeds of the ice and causing a ∼13% rise in the mean vapour increase in both the 15-16 and 16-17 km height ranges, respectively, when compared to the control case. Increases in the total water were much larger, being 34% and 132% higher for the same height ranges, but it is unclear whether the extra ice will be able to evaporate before precipitating from the region. These results suggest a possible impact of natural and anthropogenic aerosols on how convective clouds affect stratospheric moisture levels.

Migração (2,5-D) com amplitudes verdadeiras em meios com gradiente constante de velocidade

A migração com amplitudes verdadeiras de dados de reflexão sísmica, em profundidade ou em tempo, possibilita que seja obtida uma medida dos coeficientes de reflexão dos chamados eventos de reflexão primária. Estes eventos são constituídos, por exemplo, pelas reflexões de ondas longitudinais P-P em refletores de curvaturas arbitrárias e suaves. Um dos métodos mais conhecido é o chamado migração de Kirchhoff, através do qual a imagem sísmica é produzida pela integração do campo de ondas sísmicas, utilizando-se superfícies de difrações, denominadas de Superfícies de Huygens. A fim de se obter uma estimativa dos coeficientes de reflexão durante a migração, isto é a correção do efeito do espalhamento geométrico, utiliza-se uma função peso no operador integral de migração. A obtenção desta função peso é feita pela solução assintótica da integral em pontos estacionários. Tanto no cálculo dos tempos de trânsito como na determinação da função peso, necessita-se do traçamento de raios, o que torna a migração em situações de forte heterogeneidade da propriedade física um processo com alto custo computacional. Neste trabalho é apresentado um algoritmo de migração em profundidade com amplitudes verdadeiras, para o caso em que se tem uma fonte sísmica pontual, sendo o modelo de velocidades em subsuperfície representado por uma função que varia em duas dimensões, e constante na terceira dimensão. Esta situação, conhecida como modelo dois-e-meio dimensional (2,5-D), possui características típicas de muitas situações de interesse na exploração do petróleo, como é o caso da aquisição de dados sísmicos 2-D com receptores ao longo de uma linha sísmica e fonte sísmica 3-D. Em particular, é dada ênfase ao caso em que a velocidade de propagação da onda sísmica varia linearmente com a profundidade. Outro tópico de grande importância abordado nesse trabalho diz respeito ao método de inversão sísmica denominado empilhamento duplo de difrações. Através do quociente de dois empilhamentos com pesos apropriados, pode-se determinar propriedades físicas e parâmetros geométricos relacionados com a trajetória do raio refletido, os quais podem ser utilizados a posteriori no processamento dos dados sísmicos, visando por exemplo, a análise de amplitudes.

Influência de estruturas geológicas bidimensionais no campo geoeletromagnético na presença do eletrojato equatorial

A Terra atua como um grande magneto esférico, cujo campo assemelha-se àquele gerado por um dipolo magnético. Este campo apresenta mudanças de intensidade que variam com a localização e a hora local. A parte principal do campo geomagnético se origina no interior da Terra através de processos eletromagnéticos. Extensivos estudos mostraram ainda que existem contribuições de origem externa ao planeta, principalmente de origem solar. Dentre estas fontes há anomalias do campo magnético que surgem a partir de um aumento diurno da corrente elétrica em uma estreita faixa da ionosfera, de direção leste-oeste, centrada no equador magnético e denominada Eletrojato Equatorial (EEJ). Ocasionalmente estas correntes podem apresentar reversões de fluxo, sendo denominadas Contra-Eletrojato (CEJ). Vários autores têm estudado os efeitos do EEJ e CEJ sobre as observações geoeletromagnéticas. Eles estão interessados no efeito combinado do EEJ e estruturas geológicas condutivas 1-D e 2-D. Nestes trabalhos a estrutura 2-D sempre se apresentava paralela ao eletrojato, o que é uma hipótese bastante restritiva ao se modelar ambientes geológicos mais realistas, em que corpos bidimensionais podem ter qualquer strike em relação ao EEJ. Neste trabalho apresentamos a solução deste problema sem esta restrição. Assim, mostramos os campos geoeletromagnéticos devidos a estruturas bidimensionais que possuam strike oblíquo em relação ao EEJ, através de perfis dos campos elétrico e magnéticos calculados na superfície e formando direção arbitrária à heterogeneidade condutiva 2-D. Com esta resposta avaliamos ainda qual a influência que estruturas bidimensionais exercem sobre a resposta magnetotelúrica, sob influência do Eletrojato Equatorial. Durante o desenvolvimento deste trabalho, utilizamos o método de elementos finitos, tendo por fonte eletromagnética o EEJ e o CEJ, que por sua vez foram representados por uma combinação de distribuições gaussianas de densidade de corrente. Estas fontes foram decompostas nas direções paralela e perpendicular à estrutura 2-D, resultando nos modos de propagação TE₁ e TE₂ e TM acoplados, respectivamente. Resolvemos o modo acoplado aplicando uma Transformada de Fourier nas equações de Maxwell e uma Transformada Inversa de Fourier na solução encontrada. De acordo com os experimentos numéricos realizados em um modelo interpretativo da Anomalia Condutiva da Bacia do Parnaíba, formado por uma enorme estrutura de 3000 ohm-m dentro de um corpo externo condutivo (1 ohm-m), concluímos que a presença do CEJ causa uma inversão na anomalia, se compararmos com o resultado do EEJ. Concluímos também que para as frequências mais altas as componentes do campo elétrico apresentam menor influência da parte interna do corpo 2-D do que da parte externa. Já para frequências mais baixas este comportamento se observa com as componentes do campo magnético. Com relação à frequência, vimos os efeitos do “skin-depth”, principalmente nas respostas magnéticas. Além disso, quando a estrutura 2-D está paralela ao eletrojato, o campo elétrico é insensível à estrutura interna do modelo para todos os valores de frequência utilizados. Com respeito ao ângulo θ_h entre a heterogeneidade e a fonte, vimos que o modo TM se manifesta naturalmente quando θ_h é diferente de 0°. Neste caso, o modo TE é composto por uma parte devido à componente da fonte paralela à heterogeneidade e a outra devido à componente da fonte perpendicular, que é acoplada ao modo TM. Assim, os campos calculados têm relação direta com o valor de θ_h. Analisando a influência do ângulo entre a direção do perfil dos campos e o strike da heterogeneidade verificamos que, à medida que θ_h se aproxima de 90°, os campos primários tornam-se variáveis para valores de θ_p diferentes de 90°. Estas variações causam uma assimetria na anomalia e dão uma idéia da inclinação da direção do perfil em relação aos corpos. Finalmente, concluímos que uma das influências que a distância entre o centro do EEJ e o centro da estrutura 2-D, causa sobre as componentes dos campos está relacionado às correntes reversas do EEJ e CEJ, pois a 500 km do centro da fonte estas correntes têm máxima intensidade. No entanto, com o aumento da distância, as anomalias diminuem de intensidade. Nas sondagens MT, nós também usamos o EEJ e o CEJ como fonte primária e comparamos nossos resultados com a resposta da onda plana. Deste modo observamos que as componentes do campo geoeletromagnético, usadas para calcular a impedância, têm influência do fator de acoplamento entre os modos TE₂ e TM. Além disso, esta influência se torna maior em meios resistivos e nas frequências mais baixas. No entanto, o fator de acoplamento não afeta os dados magnetotelúricos em frequências maiores de 10^-2 Hz. Para frequências da ordem de 10^-4 Hz os dados MT apresentam duas fontes de perturbação: a primeira e mais evidente é devido à presença fonte 2-D (EEJ e CEJ), que viola a hipótese da onda plana no método MT; e a segunda é causada pelo acoplamento entre os modos TE₂ e TM, pois quando a estrutura bidimensional está obliqua à fonte 2-D temos correntes elétricas adicionais ao longo da heterogeneidade. Concluimos assim, que o strike de uma grande estrutura condutiva bidimensional relativamente à direção do EEJ ou CEJ tem de fato influência sobre o campo geomagnético. Por outro lado, para estudos magnetotelúricos rasos (frequências maiores de 10^-3 Hz) o efeito do ângulo entre a estrutura geológica 2-D e a direção do EEJ não é tão importante. Contudo, em estudos de litosfera frequências menores de 10^-3 Hz) o acoplamento entre os modos TE₂ e TM não pode ser ignorado.

Modelagem do mCSEM no domínio do tempo usando transformada discreta de Fourier

A modelagem do mCSEM é feita normalmente no domínio da frequência, desde sua formulação teórica até a análise dos resultados, devido às simplificações nas equações de Maxwell, possibilitadas quando trabalhamos em um regime de baixa frequência. No entanto, a abordagem através do domínio do tempo pode em princípio fornecer informação equivalente sobre a geofísica da subsuperfície aos dados no domínio da frequência. Neste trabalho, modelamos o mCSEM no domínio da frequência em modelos unidimensionais, e usamos a transformada discreta de Fourier para obter os dados no domínio do tempo. Simulamos ambientes geológicos marinhos com e sem uma camada resistiva, que representa um reservatório de hidrocarbonetos. Verificamos que os dados no domínio do tempo apresentam diferenças quando calculados para os modelos com e sem hidrocarbonetos em praticamente todas as configurações de modelo. Calculamos os resultados considerando variações na profundidade do mar, na posição dos receptores e na resistividade da camada de hidrocarbonetos. Observamos a influência da airwave, presente mesmo em profundidades oceânicas com mais de 1000m, e apesar de não ser possível uma simples separação dessa influência nos dados, o domínio do tempo nos permitiu fazer uma análise de seus efeitos sobre o levantamento. Como parte da preparação para a modelagem em ambientes 2D e 3D, fazemos também um estudo sobre o ganho de desempenho pelo uso do paralelismo computacional em nossa tarefa.

Surface-Potential-Based Drain Current Analytical Model for Triple-Gate Junctionless Nanowire Transistors

This paper proposes a drain current model for triple-gate n-type junctionless nanowire transistors. The model is based on the solution of the Poisson equation. First, the 2-D Poisson equation is used to obtain the effective surface potential for long-channel devices, which is used to calculate the charge density along the channel and the drain current. The solution of the 3-D Laplace equation is added to the 2-D model in order to account for the short-channel effects. The proposed model is validated using 3-D TCAD simulations where the drain current and its derivatives, the potential, and the charge density have been compared, showing a good agreement for all parameters. Experimental data of short- channel devices down to 30 nm at different temperatures have been also used to validate the model.

The 2:1 cycloadducts from [3+2] 1,3-dipolar cycloaddition of nitrile oxide and vinylacetic acid. Synthesis and liquid crystal behaviour

Four liquid crystals (LC) 3,7a-bis(4-alkyloxyphenyl)-7,7a-dihydro-6H-isoxazolo[2,3-d][1,2,4]oxadiazol-6-yl)acetic acid (7a-d) were synthesised and the mesomorphic behaviour reported. The LCs were characterised as 2: 1 bisadducts, which were obtained from a double [3+2] 1,3-dipolar cycloaddition. In the first step, the cycloaddition of 4-alkyloxyphenylnitrile oxide (4a-d) and vinylacetic acid (5) gave the initial unobserved 1:1 cycloadducts 2-[3-(4-alkyloxyphenyl)-4,5-dihydroisoxazol-5-yl]acetic acid (6a-d). In the second step, the addition of a second equivalent of 4 to 6 yielded the 2: 1 bisadducts 7a-d without any traces of 6. All compounds 7a-d were unstable during the transition from the mesophase to the isotropic state upon first heating as evidenced by the large peaks in the differential scanning calorimetry traces. Due to the chemical instability of the compounds upon heating, the transition temperature related to the smectic C to smectic A transitions was acquired by means of an image processing method. X-Ray diffraction experiments were also used to analyse the liquid-crystalline phases. A theoretical calculation was performed using density functional theory (DFT) methods at the PBE1PBE/6-311+G(2d,p) level (with solvent effect) in order to get information about the energetic profile of the 2: 1 cycloaddition. DFT studies revealed that the cycloaddition process is controlled by the HOMO(dipolarophile) - LUMO(1,3-dipole), and that the double [3+2] 1,3-dipolar cycloaddition reaction is quite possible.

HCHO, H 2 O 2 und CH 3 OOH in der Troposphäre

In dieser Arbeit wurden im Rahmen der UTOPIHAN- und HOHPEX04-Projekte Peroxid- und Formaldehydmessungen in der Troposphäre durchgeführt und wissenschaftlich interpretiert. Die Messungen während UTOPIHAN fanden dabei an Bord eines für Forschungszwecke umgerüsteten Flugzeuges (Learjet 35A) im Wesentlichen in der freien, insbesondere in der oberen Troposphäre über Europa statt. Die Messungen während HOHPEX04 waren hingegen als Bodenmessungen an der sich abwechselnd in der bodennahen Grenzschicht und in von dieser Schicht entkoppelten Luftmassen liegenden Bergstation Hohenpeißenberg (bayerisches Voralpenland) konzipiert. Um eine quantitative Auswertbarkeit der Messungen sicherzustellen, wurden die verwendeten, auf chemischer Derivatisierung und fluorimetrischer Detektion basierenden Messgeräte AL 2001CA (Peroxide) und AL 4021 (Formaldehyd) (AEROLASER) genau charakterisiert. Dabei wurde speziell die bekannte Ozoninterferenz beider Geräte in einer großen Zahl von Laborexperimenten mit unterschiedlichen Randbedingungen bezüglich Wasserdampf- und Kohlenwasserstoffgehalt der Luft untersucht. Für beide Verbindungen wurden Höhen- sowie Breitenprofile erstellt und mit Ergebnissen eines 3D-Chemie-Transport-Modells (CTM) sowie früherer Studien verglichen. In einem weiteren Kapitel werden Ergebnisse einer quantitativen Studie zum Einfluss hochreichender Konvektion auf das HCHO-Budget in der mittleren und oberen Troposphäre präsentiert. Diese Studie kommt zu dem Schluss, dass der rasche Aufwärtstransport von Vorläufergasen von HCHO und HOx wie Methanol, Aceton und sogar gut löslicher Spurengase wie CH3OOH beziehungsweise H2O2 aus der Grenzschicht einen signifikanten, auf Grund der längeren Lebensdauer von NOx über mehrere Tage andauernden und damit großräumigen Einfluss auf die Budgets von HCHO, HOx und auch O3 in der oberen Troposphäre haben kann. Die Befunde der Studie legen desweiteren nahe, dass fehlerhafte Modellvorhersagen für die NO-Mischungsverhältnisse in der Tropopausenregion, die zum Beispiel mit Mängeln des Modells bezüglich der Höhe der Konvektion und des Stratosphären-Troposphären-Austauschs zu tun haben, hauptverantwortlich sind für gefundene Differenzen zwischen Messdaten und dem verwendeten 3D-Chemie-Transport-Modell. Um die Signifikanz der Aussagen zu erhöhen, wurde eine Sensitivitätsstudie durchgeführt, in der die Konzentration einiger chemischer Verbindungen sowie die Photolyseraten variiert wurden. Eine weitere Studie zum Einfluss verschiedener Parameter auf das CH3OOH/H2O2-Verhältnis kommt zu dem Schluss, dass dieses Verhältnis keinen idealen Indikator für Wolkenprozessierung von Luftmassen darstellt, während eine signifikant positive Abweichung vom H2O2/H2O-Verhältnis in der oberen Troposphäre ein guter Indikator für rasch aufwärts transportierte Luftmassen sein kann. Im Rahmen dieser Studie werden auch Höhen- und Breitenprofile des CH3OOH/H2O2-Verhältnisses diskutiert. In einer letzten Untersuchung zu HCHO-Messungen am Observatorium Hohenpeißenberg im Sommer 2004 werden für die in zwei Windrichtungssektoren eingeteilten Daten Korrelationen anderer Spurengase wie O3, PAN, CO, NOy und Isopren mit HCHO interpretiert. In diesem Zusammenhang wird auch versucht, den beobachteten Tagesgang von HCHO zu erklären.

Seismic sequences analysis for estimation of earthquake source parameters: corner frequency, stress drop, and seismic moment observations

The present study has been carried out with the following objectives: i) To investigate the attributes of source parameters of local and regional earthquakes; ii) To estimate, as accurately as possible, M0, fc, Δσ and their standard errors to infer their relationship with source size; iii) To quantify high-frequency earthquake ground motion and to study the source scaling. This work is based on observational data of micro, small and moderate -earthquakes for three selected seismic sequences, namely Parkfield (CA, USA), Maule (Chile) and Ferrara (Italy). For the Parkfield seismic sequence (CA), a data set of 757 (42 clusters) repeating micro-earthquakes (0 ≤ MW ≤ 2), collected using borehole High Resolution Seismic Network (HRSN), have been analyzed and interpreted. We used the coda methodology to compute spectral ratios to obtain accurate values of fc , Δσ, and M0 for three target clusters (San Francisco, Los Angeles, and Hawaii) of our data. We also performed a general regression on peak ground velocities to obtain reliable seismic spectra of all earthquakes. For the Maule seismic sequence, a data set of 172 aftershocks of the 2010 MW 8.8 earthquake (3.7 ≤ MW ≤ 6.2), recorded by more than 100 temporary broadband stations, have been analyzed and interpreted to quantify high-frequency earthquake ground motion in this subduction zone. We completely calibrated the excitation and attenuation of the ground motion in Central Chile. For the Ferrara sequence, we calculated moment tensor solutions for 20 events from MW 5.63 (the largest main event occurred on May 20 2012), down to MW 3.2 by a 1-D velocity model for the crust beneath the Pianura Padana, using all the geophysical and geological information available for the area. The PADANIA model allowed a numerical study on the characteristics of the ground motion in the thick sediments of the flood plain.

Behavioral and anatomical abnormalities in a sodium iodate-induced model of retinal pigment epithelium degeneration

We characterized changes in the visual behavior of mice in which a loss of the retinal pigment epithelium (RPE) was experimentally induced with intravenous (i.v.) administration of sodium iodate (NaIO3). We compared and correlated these changes with alterations in neural retinal structure and function. RPE loss was induced in 4-6 week old male C57BL/6 mice with an i.v. injection of 1% NaIO3 at three concentrations: 35, 50, or 70 mg/kg. At 1, 3, 7, 14, 21, and 28 days (d) as well as 6 months post injection (PI) a behavioral test was performed in previously trained mice to evaluate visual function. Eye morphology was then assessed for changes in both the RPE and neural retina. NaIO3-induced RPE degeneration was both dose and PI time dependent. Our low dose showed no effects, while our high dose caused the most damage, as did longer PI times at our intermediate dose. Using the intermediate dose, no changes were detectable in either visual behavior or retinal morphology at 1 d PI. However, at 3 d PI visual behavior became abnormal and patchy RPE cell loss was observed. From 7 d PI onward, changes in retinal morphology and visual behavior became more severe. At 6 months PI, no recovery was seen in any of these measures in mice administered the intermediate dose. These results show that NaIO3 dosage and/or time PI can be varied to produce different, yet permanent deficits in retinal morphology and visual function. Thus, this approach should provide a unique system in which the onset and severity of RPE damage, and its consequences can be manipulated. As such, it should be useful in the assessment of rescue or mitigating effects of retinal or stem cell transplantation on visual function.

DEVELOPMENT OF A PREDICTIVE COMBUSTION MODEL OF A SPARK IGNITED ENGINE WITH GASOLINE DIRECT INJECTION, VARIABLE VALVE TIMING, DURATION AND LIFT TECHNOLOGIES

There is a need by engine manufactures for computationally efficient and accurate predictive combustion modeling tools for integration in engine simulation software for the assessment of combustion system hardware designs and early development of engine calibrations. This thesis discusses the process for the development and validation of a combustion modeling tool for Gasoline Direct Injected Spark Ignited Engine with variable valve timing, lift and duration valvetrain hardware from experimental data. Data was correlated and regressed from accepted methods for calculating the turbulent flow and flame propagation characteristics for an internal combustion engine. A non-linear regression modeling method was utilized to develop a combustion model to determine the fuel mass burn rate at multiple points during the combustion process. The computational fluid dynamic software Converge ©, was used to simulate and correlate the 3-D combustion system, port and piston geometry to the turbulent flow development within the cylinder to properly predict the experimental data turbulent flow parameters through the intake, compression and expansion processes. The engine simulation software GT-Power © is then used to determine the 1-D flow characteristics of the engine hardware being tested to correlate the regressed combustion modeling tool to experimental data to determine accuracy. The results of the combustion modeling tool show accurate trends capturing the combustion sensitivities to turbulent flow, thermodynamic and internal residual effects with changes in intake and exhaust valve timing, lift and duration.

A reconstruction of radiocarbon production and total solar irradiance from the Holocene ¹⁴C and CO₂ records: implications of data and model uncertainties

Radiocarbon production, solar activity, total solar irradiance (TSI) and solar-induced climate change are reconstructed for the Holocene (10 to 0 kyr BP), and TSI is predicted for the next centuries. The IntCal09/SHCal04 radiocarbon and ice core CO2 records, reconstructions of the geomagnetic dipole, and instrumental data of solar activity are applied in the Bern3D-LPJ, a fully featured Earth system model of intermediate complexity including a 3-D dynamic ocean, ocean sediments, and a dynamic vegetation model, and in formulations linking radiocarbon production, the solar modulation potential, and TSI. Uncertainties are assessed using Monte Carlo simulations and bounding scenarios. Transient climate simulations span the past 21 thousand years, thereby considering the time lags and uncertainties associated with the last glacial termination. Our carbon-cycle-based modern estimate of radiocarbon production of 1.7 atoms cm−2 s−1 is lower than previously reported for the cosmogenic nuclide production model by Masarik and Beer (2009) and is more in-line with Kovaltsov et al. (2012). In contrast to earlier studies, periods of high solar activity were quite common not only in recent millennia, but throughout the Holocene. Notable deviations compared to earlier reconstructions are also found on decadal to centennial timescales. We show that earlier Holocene reconstructions, not accounting for the interhemispheric gradients in radiocarbon, are biased low. Solar activity is during 28% of the time higher than the modern average (650 MeV), but the absolute values remain weakly constrained due to uncertainties in the normalisation of the solar modulation to instrumental data. A recently published solar activity–TSI relationship yields small changes in Holocene TSI of the order of 1 W m−2 with a Maunder Minimum irradiance reduction of 0.85 ± 0.16 W m−2. Related solar-induced variations in global mean surface air temperature are simulated to be within 0.1 K. Autoregressive modelling suggests a declining trend of solar activity in the 21st century towards average Holocene conditions.

Along-Strike Differences in the Southern Alps of New Zealand: Consequences of Inherited Variation in Rheology

Long- and short-term strain variations along the Australian-Pacific plate boundary through the South Island of New Zealand, including a 300% increase in orogen width, coexistence of oblique thrusting on orthogonal structures, and variability in the locus of orogenic gold deposits, coincide with rheologically relevant geological variation. Our model investigates the consequences of thin, strong lower crust in the north and thick, weak lower crust in the south. Solution of the full 3-D mechanical equations reproduces the larger wavelength strain patterns of the orogen. A 3-D perturbation-based analytical solution leads to the identification of the sensitivity of displacement type to minor stress changes. Transition from boundary-normal thrusting to boundary-parallel thrusting occurs at the transition from strong to weak lower crust and is related to an increase in either tau(yz) (shear stress in the yz plane) or the ratio of the coordinate normal stresses, (sigma(yy)/sigma(xx)), where x and y are in the horizontal and z is vertical. Both mechanisms are compatible with the geologically dependent rheological variation employed in our model. Citation: Upton, P., P. O. Koons, D. Craw, C. M. Henderson, and R. Enlow (2009), Along-strike differences in the Southern Alps of New Zealand: Consequences of inherited variation in rheology, Tectonics, 28, TC2007, doi:10.1029/2008TC002353.

Model-based changes in global annual mean surface temperature change (Delta T_g) and radiative forcing due to land ice albedo changes (Delta R_[LI]) over the last 5 Myr, supplementary material

It is still an open question how equilibrium warming in response to increasing radiative forcing - the specific equilibrium climate sensitivity S - depends on background climate. We here present palaeodata-based evidence on the state dependency of S, by using CO2 proxy data together with a 3-D ice-sheet-model-based reconstruction of land ice albedo over the last 5 million years (Myr). We find that the land ice albedo forcing depends non-linearly on the background climate, while any non-linearity of CO2 radiative forcing depends on the CO2 data set used. This non-linearity has not, so far, been accounted for in similar approaches due to previously more simplistic approximations, in which land ice albedo radiative forcing was a linear function of sea level change. The latitudinal dependency of ice-sheet area changes is important for the non-linearity between land ice albedo and sea level. In our set-up, in which the radiative forcing of CO2 and of the land ice albedo (LI) is combined, we find a state dependence in the calculated specific equilibrium climate sensitivity, S[CO2,LI], for most of the Pleistocene (last 2.1 Myr). During Pleistocene intermediate glaciated climates and interglacial periods, S[CO2,LI] is on average ~ 45 % larger than during Pleistocene full glacial conditions. In the Pliocene part of our analysis (2.6-5 Myr BP) the CO2 data uncertainties prevent a well-supported calculation for S[CO2,LI], but our analysis suggests that during times without a large land ice area in the Northern Hemisphere (e.g. before 2.82 Myr BP), the specific equilibrium climate sensitivity, S[CO2,LI], was smaller than during interglacials of the Pleistocene. We thus find support for a previously proposed state change in the climate system with the widespread appearance of northern hemispheric ice sheets. This study points for the first time to a so far overlooked non-linearity in the land ice albedo radiative forcing, which is important for similar palaeodata-based approaches to calculate climate sensitivity. However, the implications of this study for a suggested warming under CO2 doubling are not yet entirely clear since the details of necessary corrections for other slow feedbacks are not fully known and the uncertainties that exist in the ice-sheet simulations and global temperature reconstructions are large.

Modelling calving front dynamics using a level-set method: application to Jakobshavn Isbræ, West Greenland, links model results in MATLAB format

Calving is a major mechanism of ice discharge of the Antarctic and Greenland ice sheets, and a change in calving front position affects the entire stress regime of marine terminating glaciers. The representation of calving front dynamics in a 2-D or 3-D ice sheet model remains non-trivial. Here, we present the theoretical and technical framework for a level-set method, an implicit boundary tracking scheme, which we implement into the Ice Sheet System Model (ISSM). This scheme allows us to study the dynamic response of a drainage basin to user-defined calving rates. We apply the method to Jakobshavn Isbræ, a major marine terminating outlet glacier of the West Greenland Ice Sheet. The model robustly reproduces the high sensitivity of the glacier to calving, and we find that enhanced calving triggers significant acceleration of the ice stream. Upstream acceleration is sustained through a combination of mechanisms. However, both lateral stress and ice influx stabilize the ice stream. This study provides new insights into the ongoing changes occurring at Jakobshavn Isbræ and emphasizes that the incorporation of moving boundaries and dynamic lateral effects, not captured in flow-line models, is key for realistic model projections of sea level rise on centennial timescales.