Fragmentação florestal: efeitos em múltipla escala sobre a diversidade de aves em remanescentes florestais no noroeste do Estado de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variação da comunidade planctônica e fatores físico-químicos da água em dois sistemas de aquicultura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção e caracterização de carvão ativado de caroço de buriti (Mauritia flexuosa L. f.) para avaliar o processo de adsorção de uma solução de Cu (II)

Produziu-se carvão de caroço de buriti (CCB) a partir do rejeito da produção artesanal do fruto, destinado à extração de óleo, à temperatura de 400ºC. O CCB então foi ativado a temperaturas de 800ºC e 900ºC. Ensaios de adsorção foram executados para se avaliar o desempenho dessas temperaturas de ativação na adsorção de uma solução de cobre (II) de concentração inicial conhecida de 50 mg/L. Após a análise dos resultados, decidiu-se pela ativação do carvão a 900ºC. Caracterizou-se o carvão ativado do caroço de buriti (CACB) a 900ºC de acordo com as propriedades comerciais, tais como: área específica, porosimetria, densidades aparente e real, porosidade de um leito fixo, microscopia eletrônica de varredura, conteúdo de cinzas, pH, umidade, carbono fixo e grupos funcionais de superfície ácida presentes no CACB. Realizaram-se ensaios de equilíbrio de adsorção para se determinar a influência do diâmetro das partículas de CACB (D < 0,595 mm; 0,595 < D < 1,19 mm e D > 1,19 mm); a influência do tempo de contato adsorvente/adsorvato (15, 30, 60, 120, 180, 240 e 300 minutos); a influência do pH (3,00; 4,01; 5,18 e 6,00) e a influência da concentração inicial da solução de cobre (II) (5, 10, 30, 50, 80, 100 e 200 mg/L) para se avaliar a eficiência de remoção. Os resultados mostraram uma maior eficiência de remoção de cobre (II) para o diâmetro D < 0,595 mm; para o tempo de contato de 300 minutos; para o pH de 4,01 e para as concentrações iniciais de cobre (II) de 50 e 80 mg/L. Os modelos matemáticos de Langmuir e Freundlich foram aplicados para os dados de equilíbrio de adsorção. O modelo matemático de Langmuir foi o que melhor se ajustou aos dados de equilíbrio. De acordo com os dados da cinética de equilíbrio, observa-se que a partir do tempo de contato de 15 minutos todas as concentrações de equilíbrio ficaram abaixo do máximo permitido de 1,0 mg/L previsto pela legislação CONAMA nº 357/2005 para lançamento de efluentes em corpos receptores. Os resultados experimentais encontrados são indicativos de que é possível a remoção de cobre (II) de efluentes industriais utilizando CACB ativado fisicamente a 900ºC por um período de 60 minutos.

Effects of environmental factors on community structure of Leptophlebiidae (Insecta, Ephemeroptera) in Cerrado streams, Brazil

O efeito de fatores ambientais sobre a abundância, riqueza de espécies e grupos funcionais alimentares de Leptophlebiidae foi analisado em 16 locais pertencentes a quatro córregos de Cerrado, a partir de coletas de substrato em três períodos de 2005. Foram amostradas 5.492 larvas distribuídas em 14 espécies, classificadas em três grupos funcionais alimentares: raspadores, coletores-filtradores e fragmentadores. A abundância e riqueza de espécies não foram afetadas por nenhum dos fatores ambientais investigados, mas a integridade dos hábitats exerceu efeito positivo sobre a abundância dos fragmentadores, consequência da intrínseca interação desses organismos com a mata ciliar. Dessa forma, acreditamos que este trabalho agrega informações bioecológicas sobre as espécies e grupos funcionais de insetos aquáticos e poderá contribuir no monitoramento e conservação de riachos do Cerrado.

Estratégias de exploração dos recursos florais pelas abelhas (Hymenoptera: Apiformes) em uma comunidade vegetal em regeneração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Community structure of mites (Arachnida: Acari) in six rubber tree clones

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Strength of 3Y-TZP and feldspathic porcelain subjected to different cooling methods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A synthesis of captopril through a Baylis-Hillman reaction

A synthesis of the antihipertensive amide 1, named captopril, is described. The strategy is based on a Baylis-Hillman reaction between N-acryloylproline and formaldehyde. Subsequential diastereoselective hydrogenation step and functional group interconversion provided captopril in good overall yield.

Use of Guanidine Compounds in the Treatment of Neglected Tropical Diseases

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O uso de experimentos didáticos como ferramenta para o ensino de física nos anos iniciais da educação básica

When it comes to teaching physics in the early years of elementary school, the first question is: but there are opportunities to teach concepts to children of such complexity? This study sought to examine approaches and strategies to enter the Basic Education in Physics. To this end, we used low cost materials testing, taking as its starting point the work of Ferreira (1978) instrumentation for Teaching Physics, particularly with the theme electrostatics. The present study was made from the use of prototypes developed with the materials cited. Observations were made in the classroom looking for, from the records of teaching, analyzing the behavior of children and their arguments, possibilities for Physics Teaching this age group as well as some evidence of their cognitive development. In teaching discussions were held with students of the early years of elementary school involving conceptual and phenomenological aspects, adapting such knowledge at the level of logical and mathematical thinking that was still under development. The work shows that it is possible to work on electrostatic physical concepts with children belonging to the age group of nine to ten years. With the support of the group Pibid Physics city of Rio Claro, I realize my observations and practices at the Municipal School Marcelo Schmidt, which proved to be available and open for acceptance of this proposal

Crescimento de apatita na superfície da liga Ti-25Ta empregando dois tipos de tratamento de superfície: biomimético e deposição de polímero por eletrofiação

Titanium and its alloys has been widely used as materials for metallic biomaterials implants are usually employed to restore the hard tissue function, being used for artificial joints and bones, synthetic plates, crowns, dental implants and screws . Objective of this work was the surface modification of Ti-alloy 25Ta from biomimetic surface treatment of employment and deposition of polymer by electrospinning. The league was obtained from the fusion of the pure elements in the arc furnace with controlled atmosphere. The ingots were subjected to heat treatment, cold forged and sectioned discs with 13 mm diameter and 3 mm thick. Two surface treatments was evaluated, biomimetic and electrospinning with PCL fiber. The biomimetic treatment was performed involving alkaline treatment for three molarities 1.5M, 3M and 5M with immersion in SBF. The electrospinning was performed using PCL polymer alloy surface after the alkali treatment Ti25Ta 1M. For this group the polymer coated surfaces were immersed in calcium phosphate containing solution for immobilization of apatite. The results were compared with previous studies using surface treatment group to verify hydroxyapatite formation on the sample surface and it is concluded that the best condition is biomimetic treatment with 5M alkali treatment and heat treatment at 80 ° C for 72 hours

Implantes nanotopograficamente modificados pela ação do laser Yb-YAG

Titanium has proven its suitability as an implant material in surgery over many years. Excellent biocompatibility and corrosion resistance are outstanding features. Implant surfaces always causes concern and interest in scientific communities, due to its close relationship with the time required for osseointegration. Surface modification can be performed by several methods, being laser irradiation one of them. Titanium implants with two different surfaces were inserted in rabbits: Group I (G-I: machined surface, control group), and group II (G-II: laser irradiated, test group) being processed 30 and 60 days after surgery for histological analysis. Surface characterization was performed with SEM-EDS, contact angle measurement, and mean roughness (Ra) parameters. Surface analysis in the GII group showed a nanomorphology affected by melt and quick solidification zones following laser irradiation (SEM), as well as total wettability and Ra mean values significantly higher than in the G-I group. The laser treatment resulted in a homogenized, porous surface, with increased surface area and volume. Histological analysis of bone-implant contact linear extension (BIC) showed better results in G-II at 30 days (39.26 ± 18.23 and 68.41 ± 13.68 for G-I and G-II groups, respectively). Titanium implants modified by laser irradiation showed important features that may accelerate early osseointegration.

Talent detection in taekwondo: which factors are associated with the longitudinal competitive success?

Background Several morphological and functional characteristics are associated with the performance of taekwondo (TKD) adult athletes. However, we did not find any longitudinal study associating these features to the future performance of young athletes, and thereby, identifying the best variables to use in a battery of tests to talent detection. Therefore, the aim of this study is answer the question which factors are associated with the longitudinal competitive success of TKD young athletes over five competitive years (2008 to 2012).Material &Methods: Six taekwondo athletes (13.06 +/- 1.07 years, 43.6 +/- 6.6 kg, 157.9 +/- 8.3 cm), who trained three to six hours per week, for more than three years, were assessed on 32 maturational indicators, of body composition, anthropometric and functional, using anthropometric techniques, dual energy x-ray absorptiometry, carpal radiography and contact platform. To determine the competitive ranking, the competitive results of athletes from 2008 to 2012 were analysed, and these values were correlated with the other 32 indicators for determining the Longitudinal Predictors of Performance in TKD (LPPT). Moreover, one of the athletes achieved results notably higher than the other, being medalled at Junior World Championships. Therefore, all variables were transformed into z-scores and all those in which this athlete presented superior performance in 1 z-scores were considered as LPPT. Results: The athlete of reference (the first in Longitudinal Competitive Ranking 2008-2012) distinguished, in accordance with the criteria, in nineteen LPPT indicators. The ranking was correlated with 6 LPPT parameters, including one from the maturation group of indicators and five from the functional group.Conclusion: Our results allowed us to identify several factors that are related to longitudinal competitive success in taekwondo young athletes. These factors should be considered by coaches to the proper selection of training programs, as well as for the pre-selection of young talents in competitive taekwondo. However, these results apply only to the Portuguese taekwondo adolescent athletes, being of limited generalizability.

Análise da eficiência da biomassa de banana verde como complemento alimentar na melhora da constipação em pacientes funcionais e associada ao pós-operatório da Doença de Hirschdprung

Pós-graduação em Bases Gerais da Cirurgia - FMB

Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry Characterization of Primary Amine End-Functionalized Polystyrene and Poly(methyl methacrylate) Synthesized by Living Anionic Polymerization Techniques

The reaction of living anionic polymers with 2,2,5,5-tetramethyl-1-(3-bromopropyl)-1-aza-2,5- disilacyclopentane (1) was investigated using coupled thin layer chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Structures of byproducts as well as the major product were determined. The anionic initiator having a protected primary amine functional group, 2,2,5,5-tetramethyl- 1-(3-lithiopropyl)-1-aza-2,5-disilacyclopentane (2), was synthesized using all-glass high-vacuum techniques, which allows the long-term stability of this initiator to be maintained. The use of 2 in the preparation of well-defined aliphatic primary amine R-end-functionalized polystyrene and poly(methyl methacrylate) was investigated. Primary amino R-end-functionalized poly(methyl methacrylate) can be obtained near-quantitatively by reacting 2 with 1,1-diphenylethylene in tetrahydrofuran at room temperature prior to polymerizing methyl methacrylate at -78 °C. When 2 is used to initiate styrene at room temperature in benzene, an additive such as N,N,N',N'- tetramethylethylenediamine is necessary to activate the polymerization. However, although the resulting polymers have narrow molecular weight distributions and well-controlled molecular weights, our mass spectra data suggest that the yield of primary amine α-end-functionalized polystyrene from these syntheses is very low. The majority of the products are methyl α-end-functionalized polystyrene.