Cannabinoids impact on pregnancy: effects in trophoblast cells

Cannabinoids (CBs) can be classified as: phytocannabinoids, the constituents of the Cannabis sativa plant; synthetic cannabinoids lab-synthesized and the endocannabinoids that are endogenous lipid mediators. Cannabinoid compounds activate cannabinoid receptors – CB1 and CB2. The most prevalent psychoactive phytocannabinoid is Δ9tetrahydrocannabinol (THC), but more than 60 different CBs were already identified in the plant. The best characterized endocannabinoids (eCBs) are anandamide (AEA) and 2arachidonoylglycerol (2-AG), that are involved in several physiological processes including synaptic plasticity, pain modulation, energy homeostasis and reproduction. On the other hand, some synthetic cannabinoids that were initially designed for medical research, are now used as drugs of abuse. During the period of placental development, highly dynamic processes of remodeling occur, involving proliferation, apoptosis, differentiation and invasion of trophoblasts. It is known that a tight control of eCBs levels is required for normal pregnancy progression and that eCBs are involved in trophoblast cells turnover. Therefore, by sharing activation of the same receptors, exposure to exocannabinoids either by recreational or medicinal use may lead to alterations in the eCBs levels and in the endocannabinoid system homeostasis In this work, it was studied the impact of CBs in BeWo trophoblastic cells and in primary cultures of human cytotrophoblasts. Cells were treated for 24 hours with different concentrations of THC, the synthetic cannabinoid WIN‐55,212 (WIN) and 2-AG. Treatment with THC did not affect BeWo cells viability while WIN and 2-AG caused a dose-dependent viability loss. Morphological studies together with biochemical markers indicate that 2-AG is able to induce apoptosis in cytotrophoblasts. On the other hand, morphological studies after acridine orange staining suggest that autophagy may take part in WIN-induced loss of cell viability. All cannabinoids caused a decrease in mitochondrial membrane potential (Δψm) but only 2-AG led to ROS/RNS generation, though no changes in glutathione levels were observed. In addition, ER-stress may be involved in the 2-AG induced-oxidative stress, as preliminary results point to an increase in CCAAT-enhancer-binding protein homologous protein (CHOP) expression. Besides the decrease in cell viability, alterations in cell cycle progression were observed. WIN treatment induced a cell cycle arrest in G0/G1 phase, whereas 2-AG induced a cell cycle arrest in G2/M phase. Here it is reinforced the relevance of cannabinoid signaling in fundamental processes of cell proliferation and cell death in trophoblast cells. Since cannabis-based drugs are the most consumed illicit drugs worldwide and some of the most consumed recreational drugs by pregnant women, this study may contribute to the understanding of the impact of such substances in human reproduction.

Desenvolvimento de filmes nanocompósitos de isolado protéico de corvina (micropogonias furnieri) e argila organofílica

O desenvolvimento de filmes e coberturas é um processo de transformação que utiliza polímeros capazes de formar uma matriz contínua. As proteínas de pescado apresentam propriedades que são vantajosas no preparo de biofilmes, como habilidade para formar redes, plasticidade e elasticidade, apresentando boa barreira ao oxigênio, mas sua barreira ao vapor de água é baixa devido à sua natureza hidrofílica. Estas propriedades podem ser melhoradas aplicando nanotecnologia, incluindo materiais como as nanoargilas. O objetivo do presente trabalho foi desenvolver filmes nanocompósitos a partir de biopolímeros protéicos provenientes de isolados protéicos de corvina (Micropogonias furnieri) e argilas organofílicas. O isolado protéico de corvina (IPC) foi obtido utilizando processo de variação de pH para solubilizar e isolar proteína. Os filmes poliméricos foram desenvolvidos pela técnica de “casting”. Para o desenvolvimento de filmes nanocompósitos de isolado protéico de corvina (IPC) e montmorilonita foi executado um planejamento experimental de 3 níveis e 3 fatores com 3 réplicas no ponto central. Os resultados foram submetidos à metodologia de superfície de resposta (MSR) para estudar os efeitos simultâneos das variáveis independentes, concentração de IPC (IPC = 2; 3,5 e 5 g/100 g de solução filmogênica); concentração de montmorilonita (MMT = 0,3; 0,5 e 0,7 g/100 g de solução filmogênica); e plastificante glicerol (G = 25, 30 e 35 g/100 g de IPC em base seca) sobre as respostas resistência à tração (MPa), elongação (%), força na ruptura (N), permeabilidade ao vapor de água (g mm m-2 d -1 KPa-1 ) e solubilidade (%). O isolado protéico obtido de carne mecanicamente separada de corvina apresentou 97,87% de proteína (em base seca), boa capacidade de retenção de água e solubilidade. Os valores de resistência à tração variaram entre 7,2 e 10,7 MPa e os valores de elongação de 39,6 a 45,8%. Os valores encontrados para PVA no presente trabalho encontram-se entre 3,2 e 5,5 g mm m-2 d -1 KPa-1 . Os filmes nanocompósitos produzidos a partir de IPC e MMT foram promissores, do ponto de vista das propriedades mecânicas, aparência visual e fácil manuseio, bem como baixa permeabilidade ao vapor de água e a baixa solubilidade. Com relação às propriedades mecânicas, a concentração de IPC e MMT foi o principal fator que influenciou no desenvolvimento dos filmes nanocompósitos. O planejamento experimental utilizado determinou que 3,5 g de IPC; 0,5 g de MMT e 30 (g/100g de IPC) de glicerol seriam os parâmetros ideais para desenvolvimento de filmes nanocompósitos utilizando a técnica de “casting”. As coberturas de isolado protéico de corvina (IPC) e as coberturas de IPC e MMT foram aplicadas em mamão minimamente processado para avaliar sua vida- útil. O revestimento com cobertura de isolado protéico de corvina e montmorilonita aplicado em mamão minimamente processado apresentou menor perda de massa 5,26%, menor crescimento microbiano e menor diminuição de firmeza, luminosidade e pH conseqüentemente apresentou os melhores resultados na cobertura de mamão minimamente processado, quando comparados com a amostra controle sem cobertura.

Moringa oleifera plasticity to face climatic changes

Extreme abiotic factors, such drought combined with heat waves and/or high UVB radiation are predicted to become more frequent in the future. The impact on plant production of these challenges on multipurpose Moringa oleifera L. remains unclear. A susceptibility of this species may lead to increase poverty in endangered regions. M. oleifera is a woody species native from sub-Himalaya regions under high climate stress pressure. The interest on this species is emerging due to its several medicinal properties and its nutritional value. Agropharmaceutical industry is interest in this species too. To understand the impact of increased climate factors, young (2 months old) plants of this species were exposed to water deficit (WD) and UVB (alone or combined). WD and WD+UVB imposition consists of unwater for 4 days. After 1 day withholding water, UVB and WD+UVB were irradiated with 26.3 kJ m-2 distributed per 3 days. Immediately after treatment exposition (1 day) and after 10 days, plant water status, growth, carbon metabolism and oxidative stress were measured. Overall no significant differences were observed in WD, regarding the parameters analysed, except on gas exchanges, MDA and phenols. The plants exposed to UVB showed, in general, more severe effects, as higher pigment content, MDA and membrane permeability, while no changes were observed in the total antioxidant activity. Plants exposed to UVB+WD, despite changes observed, the impact was lower than the one observed in UVB exposed plants, meaning that a protective/adaptive mechanism was developed in the plants under combined stressors. On the other hand, in all treatments the net CO2 assimilation rate decreased. Results suggest that M. oleifera has some tolerance to WD and UVB, and that develops mechanism of adaptation to these two types of stress that often arise in combination under a climate change scenario.

Estudo da participação do receptor P2X7 no desempenho cognitivo de roedores: abordagens farmacológicas e genéticas

A memória é um fenômeno decorrente de um conjunto de processos fisiológicos denominado plasticidade. Várias formas de plasticidade são necessárias no processo de formação da memória e também são responsáveis pelo gerenciamento do comportamento. O fenômeno eletrofisiológico chamado potencialização de longa duração (PLD), cuja ocorrência no hipocampo merece destaque, foi proposto como sendo o mecanismo de plasticidade constitutivo das bases da consolidação da memória nesta região encefálica. A importância da plasticidade na região CA1 do hipocampo se manifesta em diversas formas de aprendizado, como espacial e condicionamento clássico. Os eventos bioquímicos que culminam na plasticidade e formação da memória sofrem influência de diversos sistemas de neurotransmissores e evidências indicam também a participação do sistema purinérgico, provavelmente através dos receptores ionotrópicos P2X. Receptores purinérgicos do subtipo P2X7 (P2X7R), largamente distribuídos no sistema nervoso central (SNC), além de possuírem várias características que os distinguem de outros subtipos de receptores P2X, estão envolvidos na regulação da liberação de neurotransmissores cruciais para a promoção da PLD na região hipocampal e formação da memória. Assim, este trabalho objetivou avaliar a participação dos P2X7R em camundongos geneticamente modificados (KO), que não expressam o receptor P2X7, e ratos através da exposição destes a diferentes tarefas comportamentais, bem como avaliar o efeito do enriquecimento ambiental sobre possíveis déficits mnemônicos resultantes da supressão gênica sobre o receptor P2X7. Os resultados sugerem que os P2X7R participam tanto da memória aversiva como da memória espacial: o bloqueio farmacológico com o antagonista específico de P2X7R A-740003 em diferentes janelas temporais causou prejuízos mnemônicos em ratos submetidos à tarefa do medo condicionado contextual (MCC), enquanto a deleção do P2X7R causou déficits mnemônicos a camundongos nas tarefas do labirinto aquático de Morris e no MCC, indicando prejuízos nas memórias espacial e aversiva, respectivamente. Experimentos com enriquecimento ambiental sugerem que esta forma de estimulação contribui na reversão dos déficits mnemônicos causado pela ausência do P2X7R. Por fim, nenhuma alteração na memória de habituação foi observada em animais com deleção gênica para o P2X7R.

DESENVOLVIMENTO INICIAL E QUALIDADE DE MUDAS DE Copaifera langsdorffii Desf. SOB DIFERENTES NÍVEIS DE SOMBREAMENTO

As florestas de galeria vêm sendo fragmentadas, levando à perda de sua elevada diversidade, tornando-se imprescindíveis estudos que avaliem o comportamento ecológico de suas espécies arbóreas. O presente estudo teve como objetivo testar a hipótese de que a produção de mudas de Copaifera langsdorffii é influenciada pela luminosidade do ambiente, apresentando maior qualidade e desenvolvimento inicial em níveis intermediários de luz. As plantas foram testadas em pleno sol, 30%, 50%, 70% e 90% de sombreamento, avaliando-se número de folhas, altura e diâmetro aos 60, 90, 120 e 191 dias após a emergência (DAE) e massa seca aérea e radicular e, índice de qualidade de Dickson ao final do experimento (191 DAE). O efeito dos níveis de sombreamento foi analisado por meio de análise de regressão. As plantas apresentaram boa plasticidade de crescimento nos diferentes níveis de luminosidade, mas com melhor desenvolvimento e qualidade (IQD) em 50% de sombreamento, corroborando a hipótese testada. A luminosidade ou sombreamento excessivo devem ser evitados para garantir a produção de mudas mais vigorosas de Copaifera langsdorffii. Assim, recomenda-se a produção de mudas desta espécie sob 50% de sombreamento para favorecer a sua qualidade e possivelmente garantir melhor sobrevivência em campo.

Intervenção precoce no transtorno do espetro do autismo

Este trabalho de investigação tem como tema a Intervenção Precoce no Transtorno do Espetro do Autismo. Tem-se vindo a dar cada vez mais a devida importância à intervenção precoce, justamente por se saber do seu papel fundamental como forma de prevenção de resultados negativos e maximização de oportunidades de desenvolvimento para as crianças sinalizadas, ou já diagnosticadas com este espetro, uma vez que quanto mais precocemente forem iniciadas as intervenções, mais longe se pode ir na atenuação das limitações funcionais de origem, pois com uma intervenção ainda precoce é possível atuar ao nível da transformação das sinapses neuronais, que estão ainda flexíveis, devido à plasticidade neural presente nestas idades. Com este trabalho pretende-se contribuir para o reforço da relevância da intervenção precoce no TEA, que vai assumindo um papel cada vez mais ativo no meio escolar, e o respetivo papel do professor de educação especial, na sua deteção e intervenção, atuando como parte de uma equipa multidisciplinar, sendo para tal necessário que esteja preparado, familiarizado com os sinais, características e modelos, estratégias e formas de intervenção deste transtorno. A parte metodológica deste trabalho é direcionada para a formação e consequente prática pedagógica dos professores de Educação Especial. E, a pergunta que se levanta é a seguinte: estarão, os professores de Educação Especial, preparados para intervir precocemente no Transtorno do Espetro do Autismo? Depois de aplicado um questionário aos docentes de Educação Especial que trabalham atualmente na Intervenção Precoce, pode-se comprovar que estes não estão nem se sentem preparados para intervir precocemente junto de crianças com este tipo de transtorno. O trabalho aqui desenvolvido pretende então colaborar para uma melhor reflexão acerca da formação e do posterior trabalho destes profissionais, de forma a que cada vez se consigam intervenções mais adequadas e eficazes. Posto isto, e atendendo ao que foi observado nesta investigação, pode-se concluir que se deve melhorar a formação dos professores de Educação Especial, pois estes têm um papel fundamental na identificação precoce do TEA, e respetiva intervenção, mas a falta de preparação para o fazer devido à falta de conhecimentos sobre o assunto,

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

As competências interculturais no processo de integração das imigrantes brasileiras em Cascais

A presente dissertação levou-nos a recolher excertos dos inquéritos, por entrevista, aplicados a oito mulheres participantes que nos ajudaram a compreender como as competências interculturais influenciaram o processo de integração em Cascais, Portugal. Ver o/a outro/a como igual apesar da sua diversidade cultural, sabendo colocar-nos no seu lugar pode parecer simples, no entanto, passar da teoria à prática exige a desconstrução da nossa perspetiva sobre o outro/a e de nós próprios. Neste processo acabamos por compilar um conjunto de informação qualitativa, que apresenta um método psicossocial de interação empático e conciliatório com os outros/as, pessoas, seres humanos como nós, livres de terem ideias e convicções diferentes das nossas. Apresentamos uma aplicação aberta à mudança, flexível e articulante de conhecimentos, concretamente das competências interculturais em constante plasticidade evolutiva.

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

O corpo na paisagem. Fragmentos de arte e natureza

Mestrado em Arquitetura Paisagista - Instituto Superior de Agronomia - UL

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Tecnologia de semeadura cruzada e reduzida na cultura da soja em função de doses de boro e zinco.

O objetivo do trabalho foi o de comparar a resposta de dois sistemas de semeadura nas características agronômicas da cultura da soja. O experimento foi conduzido na safra 2013/2014, no município de Sinop-MT, na Embrapa Agrossilvipastoril. Utilizou-se a cultivar BRS 8381, convencional. Realizou-se semeadura Cruzada a 0,45 m e semeadura Reduzida a 0,23 m entre linhas, mantendo-se a mesma população de plantas por hectare (POP). Os demais fatores experimentais foram constituídos por 3 doses de B (0, 1 e 2 kg ha-1) e 3 doses de Zn (0, 2 e 4 kg ha-1), utilizando-se como fontes o ácido bórico e o sulfato de zinco. Os dados foram submetidos à análise de variância e as médias comparadas pelo teste de Tukey, a 5% de probabilidade. Avaliou-se os seguintes parâmetros: POP, massa de 100 grãos (M100), número de vagens por planta (VAG), altura de plantas (ALT) e a produtividade de grãos (PROD). Para a POP, observou-se diferenças significativas entre os arranjos de planta (arranjos) e também na interação entre B e Zn. Entre os arranjos, o Cruzado foi estatisticamente superior ao Reduzido, com 410.000 pl ha-1 e 315.000 pl ha-1, respectivamente. Entre as doses de B dentro de Zn, observou-se diferenças somente para o tratamento testemunha de Zn, sendo que a menor dose de B proporcionou maior POP (396.000 pl ha-1) que a maior dose (343.000 pl ha-1), porém, semelhantes a dose intermediária (359.000 pl ha-1). Quanto a M100, observou-se diferenças somente entre os arranjos. O arranjo Reduzido (12,8g) proporcionou maior M100 em relação ao arranjo Cruzado (12,3 g). Para a ALT, observouse diferenças somente entre os arranjos avaliados. O Reduzido apresentou maior ALT, com 80 cm, em relação ao Cruzado (74 cm). Esse fato se deve ao próprio arranjo, onde as plantas competem mais por luz entre si, na fileira, em relação ao arranjo cruzado, causando aumento em altura. Em relação ao VAG, observou-se diferenças entre os arranjos e entre as doses de Zn. Entre os arranjos, o sistema Reduzido (45 vag pl-1) foi superior ao Cruzado (38 vag pl-1). Observou-se também redução do VAG com o aumento da POP, o que pode ser explicado pela plasticidade da cultura, que compensou o VAG pela diferença na POP. Em relação as doses de Zn, observou-se que a maior dose proporcionou maior VAG (44 vag pl-1) em relação a testemunha (39 vag pl-1), porém, semelhantes a dose intermediária (41 vag pl-1). Em relação à PROD, somente os rranjos se diferenciaram entre si. A maior PROD foi obtida no arranjo Reduzido (2738 kg ha-1) em relação ao Cruzado (2253 kg ha-1). Conclui-se que nas condições em que se desenvolveu o trabalho, o arranjo Reduzido foi superior. A adubação com B, se mal manejada, pode reduzir a POP e a aplicação adequada de Zn pode proporcionar aumento do VAG.