Measuring oscillating walking paths with a LIDAR

This work describes the analysis of different walking paths registered using a Light Detection And Ranging (LIDAR) laser range sensor in order to measure oscillating trajectories during unsupervised walking. The estimate of the gait and trajectory parameters were obtained with a terrestrial LIDAR placed 100 mm above the ground with the scanning plane parallel to the floor to measure the trajectory of the legs without attaching any markers or modifying the floor. Three different large walking experiments were performed to test the proposed measurement system with straight and oscillating trajectories. The main advantages of the proposed system are the possibility to measure several steps and obtain average gait parameters and the minimum infrastructure required. This measurement system enables the development of new ambulatory applications based on the analysis of the gait and the trajectory during a walk.

Reliability of P-drive in occupational therapy following a short training session: A promising instrument measuring seniors' on-road driving competencies

Introduction Occupational therapists could play an important role in facilitating driving cessation for ageing drivers. This, however, requires an easy-to-learn, standardised on-road evaluation method. This study therefore investigates whether use of P-drive' could be reliably taught to occupational therapists via a short half-day training session. Method Using the English 26-item version of P-drive, two occupational therapists evaluated the driving ability of 24 home-dwelling drivers aged 70 years or over on a standardised on-road route. Experienced driving instructors' on-road, subjective evaluations were then compared with P-drive scores. Results Following a short half-day training session, P-drive was shown to have almost perfect between-rater reliability (ICC2,1=0.950, 95% CI 0.889 to 0.978). Reliability was stable across sessions including the training phase even if occupational therapists seemed to become slightly less severe in their ratings with experience. P-drive's score was related to the driving instructors' subjective evaluations of driving skills in a non-linear manner (R-2=0.445, p=0.021). Conclusion P-drive is a reliable instrument that can easily be taught to occupational therapists and implemented as a way of standardising the on-road driving test.

Measuring organizational capabilities in the engineering and consulting industry

Tämän työn tarkoituksena oli tutkia kuinka organisaation kyvykkyyksiä voidaan mitata engineering- ja konsultointialalla käyttämällä ns. kyvykkyysauditointimenetelmää. Päämotiivit aineettoman omaisuuden mittaamiseksi tunnistettiin kirjallisuuskatsauksen pohjalta. Erilaisten menetelmien etuja ja haittoja tutkittiin, jotta kyvykkyysauditoinnin suorittamiseen liittyvät haasteet ja vaatimukset tulisivat tunnistetuiksi. Kyvykkyysauditoinnin rakentaminen vaati teollisuudenalan erityispiirteiden tunnistamista. Niiksi havaittiin tietointensiivisyys ja projektikeskeisyys. Auditoinnin implementaatioprosessi koostui neljästä osasta, joista kolmen ensimmäisen suorittamiseen case-yritys antoi merkittävän panoksensa. Kriittisten menestystekijöiden selvittämisen jälkeen voitiin niihin vaikuttavat organisaation kyvykkyydet tunnistaa ja arviointi suorittaa. Arvioinnit kerättiin sisäisiltä ja ulkoisilta arvioijilta, ja ne muodostivat pohjan analyysille, joka selvitti yrityksen kehittämistarpeita. Kyvykkyysauditoinnin hyödyiksi laskettiin kasvanut tietämys yrityksen vahvuuksista ja heikkouksista sekä mahdollisuus tarkkailla säännöllisesti sen kokonaissuorituskykyä ja parantaa sitä.

SAHAUSTEKNOLOGIA TEOLLISILLA SAHALAITOKSILLA NYT JA TULEVAISUUDESSA

Diplomityössä on selvitetty teollisen sahaustekniikan nykytilaa ja sahausprosessissa käytettävien sahakoneiden teknistä kehitystä Pohjois- ja Keski-Euroopassa. Sahakonevalmistajia on tutkittu niiden tuottamien laitteiden kautta sekä yleisen saatavilla olevan taloudellisen ja tieteellisten tutkimusten tarjoaman informaation avulla. Tutkimuksessa mukana oleviin sahakoneisiin tutustuminen suoritettiin sahalaitosvierailuilla suomalaisilla sahalaitoksilla kevään 2002 aikana. Tieteellisten julkaisujen tietoja verrattiin samalla vallitsevaan tilanteeseen sahoilla. Samalla tehtyjen haastatteluiden avulla selvitettiin sahakoneisiin liittyvien investointien vaikuttimia. Haastatteluiden kohteena olivat sahateollisuuden tuotannosta ja teknisestä suunnittelusta sekä johtamisesta vastaavia henkilöitä erikokoisista sahateollisuusyrityksistä. Myös muutamat sahakonevalmistajien edustajat antoivat haastattelun omia laitteitaan koskien. Sahaustuotannon raaka-ainetilannetta tutkittiin tutkimusalueella maakohtaisesti. Sahaustekniikkana nelisahaus on vallitseva työstömuoto. Siinä käytettävät sahakoneet ovat pelkkahakkuri, joka hakettaa tukin sivut sivutuotehakkeeksi, profilointiyksiköt, jotka työstävät tukin tai pelkan pintaan sivutavarakappaleiden leveyden ennen tai jälkeen pyörösahayksiköitä, jotka erottavat sahatavarakappaleet toisistaan. Merkittävimmät oheislaitteet ovat tukin ja pelkan mittauslaitteet sekä tukinsyöttölaitteet, joiden perusteella puun käytön optimointi sahausprosessissa ja suuntaus sahakoneisiin tapahtuu. Mittatarkimmat ja tuotantonopeudeltaan nopeimmat pyörösahayksiköt ovat kaksiakselisia, profiloivia sahakoneita. Näillä ominaisuuksilla on suurin painoarvo myös sahojen investointisuunnittelussa nopean käyntiinajon lisäksi. Sahakoneiden kehitykseen vaikuttavia seikkoja ovat tulevaisuudessa tukkien koon pieneneminen istutusmetsien jalostuksen lisääntyessä ja suurten aarniometsien vähetessä. Terätekniikan kehitys on tuottaa edelleen ohuempia teriä teräohjaimin, luomalla teriin sisäisiä jännityksiä tai kehittämällä uusia terägeometrioita.

Study of seawater biofiltration by measuring adenosine triphosphate (ATP) and turbidity

In the present study, we examined seawater biofiltration in terms of adenosine triphosphate (ATP) and turbidity. A pilot biofilter continuously fed with fresh seawater reduced both turbidity and biological activity measured by ATP. Experiments operated with an empty bed contact time (EBCT) of between 2 and 14 min resulted in cellular ATP removals of 32% to 60% and turbidity removals of 38% to 75%. Analysis of the water from backwashing the biofilter revealed that the first half of the biofilter concentrated around 80% of the active biomass and colloidal material that produces turbidity. By reducing the EBCT, the biological activity moved from the first part of the biofilter to the end. Balances of cellular ATP and turbidity between consecutive backwashings indicated that the biological activity generated in the biofilter represented more than 90% of the detached cellular ATP. In contrast, the trapped ATP was less than 10% of the overall cellular ATP detached during the backwashing process. Furthermore, the biological activity generated in the biofilter seemed to be more dependent on the elapsed time than the volume filtered. In contrast, the turbidity trapped in the biofilter was proportional to the volume filtered, although a slightly higher amount of turbidity was found in the backwashing water; this was probably due to attrition of the bed medium. Finally, no correlations were found between turbidity and ATP, indicating that the two parameters focus on different matter. This suggests that turbidity should not be used as an alternative to cellular concentration.

Measuring mobile WAP protocol based services

WAP tulee olemaan tulevaisuudessa tärkeässä roolissa, kun etsitään sopivaa tiedonsiirtoprotokollaa uusille mobiilipalveluille. Vaikka WAP jollain tavalla epäonnistui ensimmäisessä tulemisessaan sen suosio varmasti tulevaisuudessa tulee kasvamaan. WAP:in heikko suosio ei johtunut niinkään protokollan tiedonsiirto ominaisuuksista, vaan WAP-palveluiden kehittymättömyydestä. Tulevaisuuden palvelut kuitenkin ovat kehittyneempiä ja WAP:in suosio tulee kasvamaan. Viimeisimpänä WAP:ia käyttävänä palveluna on esitelty MMS. Kun uudet WAP:iin pohjautuvat palvelut yleistyvät, asettaa se uusia vaatimuksia myös WAP gateway:lle. Työssä tarkastellaan erilaisia mahdollisuuksia mitata mobiilisti WAP palvelujen palvelun tasoa. Työssä myös toteutetaan mobiili WAP palveluiden mittauskomponentti, joka toimii osana laajempaa ohjelmistoa. Tarkoituksena on toteuttaa mittauskomponentti, joka emuloi mahdollisimman hyvin todellista loppukäyttäjää.

Measuring and making decisions for social reciprocity

Social reciprocity may explain certain emerging psychological processes, which are likely to be founded on dyadic relations. Although some indices and statistics have been proposed to measure and make statistical decisions regarding social reciprocity in groups, these were generally developed to identify association patterns rather than to quantify the discrepancies between what each individual addresses to his/her partners and what is received from them in return. Additionally, social researchers are not only interested in measuring groups at the global level, since dyadic and individual measurements are also necessary for a proper description of social interactions. This study is concerned with a new statistic for measuring social reciprocity at the global level and with decomposing it in order to identify those dyads and individuals which account for a significant part of asymmetry in social interactions. In addition to a set of indices some exact analytical results are derived and a way of making statistical decisions is proposed.

Value at Risk in measuring market risk: Historical simulation

In this study the theoretical part was created to make comparison between different Value at Risk models. Based on that comparison one model was chosen to the empirical part which concentrated to find out whether the model is accurate to measure market risk. The purpose of this study was to test if Volatility-weighted Historical Simulation is accurate in measuring market risk and what improvements does it bring to market risk measurement compared to traditional Historical Simulation. Volatility-weighted method by Hull and White (1998) was chosen In order to improve the traditional methods capability to measure market risk. In this study we found out that result based on Historical Simulation are dependent on chosen time period, confidence level and how samples are weighted. The findings of this study are that we cannot say that the chosen method is fully reliable in measuring market risk because back testing results are changing during the time period of this study.

New method for measuring longitudinal fuctuations and directed flow in ultrarelativistic heavy ion reactions

It has been shown in recent ALICE@LHC measurements that the odd flow harmonics, in particular, a directed flow v1, occurred to be weak and dominated by random fluctuations. In this work we propose a new method, which makes the measurements more sensitive to the flow patterns showing global collective symmetries. We demonstrate how the longitudinal center of mass rapidity fluctuations can be identified, and then the collective flow analysis can be performed in the event-by-event center of mass frame. Such a method can be very effective in separating the flow patterns originating from random fluctuations, and the flow patterns originating from the global symmetry of the initial state.

Measuring individuals' response quality in self-administered psychological tests : an introduction to Gendre's functional method

The functional method is a new test theory using a new scoring method that assumes complexity in test structure, and thus takes into account every correlation between factors and items. The main specificity of the functional method is to model test scores by multiple regression instead of estimating them by using simplistic sums of points. In order to proceed, the functional method requires the creation of hyperspherical measurement space, in which item responses are expressed by their correlation with orthogonal factors. This method has three main qualities. First, measures are expressed in the absolute metric of correlations; therefore, items, scales and persons are expressed in the same measurement space using the same single metric. Second, factors are systematically orthogonal and without errors, which is optimal in order to predict other outcomes. Such predictions can be performed to estimate how one would answer to other tests, or even to model one's response strategy if it was perfectly coherent. Third, the functional method provides measures of individuals' response validity (i.e., control indices). Herein, we propose a standard procedure in order to identify whether test results are interpretable and to exclude invalid results caused by various response biases based on control indices.

Measuring Intermediary Determinants of Early Childhood Health: A Composite Index Comparing Colombian Departments

In recent years there has been growing interest in composite indicators as an efficient tool of analysis and a method of prioritizing policies. This paper presents a composite index of intermediary determinants of child health using a multivariate statistical approach. The index shows how specific determinants of child health vary across Colombian departments (administrative subdivisions). We used data collected from the 2010 Colombian Demographic and Health Survey (DHS) for 32 departments and the capital city, Bogotá. Adapting the conceptual framework of Commission on Social Determinants of Health (CSDH), five dimensions related to child health are represented in the index: material circumstances, behavioural factors, psychosocial factors, biological factors and the health system. In order to generate the weight of the variables, and taking into account the discrete nature of the data, principal component analysis (PCA) using polychoric correlations was employed in constructing the index. From this method five principal components were selected. The index was estimated using a weighted average of the retained components. A hierarchical cluster analysis was also carried out. The results show that the biggest differences in intermediary determinants of child health are associated with health care before and during delivery.

A genotypic mutation system measuring mutations in restriction recognition sequences.

The RFLP/PCR approach (restriction fragment length polymorphism/polymerase chain reaction) to genotypic mutation analysis described here measures mutations in restriction recognition sequences. Wild-type DNA is restricted before the resistant, mutated sequences are amplified by PCR and cloned. We tested the capacity of this experimental design to isolate a few copies of a mutated sequence of the human c-Ha-ras1 gene from a large excess of wild-type DNA. For this purpose we constructed a 272 bp fragment with 2 mutations in the PvuII recognition sequence 1727-1732 and studied the rescue by RFLP/PCR of a few copies of this 'PvuII mutant standard'. Following amplification with Taq-polymerase and cloning into lambda gt10, plaques containing wild-type sequence, PvuII mutant standard or Taq-polymerase induced bp changes were quantitated by hybridization with specific oligonucleotide probes. Our results indicate that 10 PvuII mutant standard copies can be rescued from 10(8) to 10(9) wild-type sequences. Taq polymerase errors originating from unrestricted, residual wild-type DNA were sequence dependent and consisted mostly of transversions originating at G.C bp. In contrast to a doubly mutated 'standard' the capacity to rescue single bp mutations by RFLP/PCR is limited by Taq-polymerase errors. Therefore, we assessed the capacity of our protocol to isolate a G to T transversion mutation at base pair 1698 of the MspI-site 1695-1698 of the c-Ha-ras1 gene from excess wild-type ras1 DNA. We found that 100 copies of the mutated ras1 fragment could be readily rescued from 10(8) copies of wild-type DNA.

Evaluation of steroidomics by liquid chromatography hyphenated to mass spectrometry as a powerful analytical strategy for measuring human steroid perturbations.

This review presents the evolution of steroid analytical techniques, including gas chromatography coupled to mass spectrometry (GC-MS), immunoassay (IA) and targeted liquid chromatography coupled to mass spectrometry (LC-MS), and it evaluates the potential of extended steroid profiles by a metabolomics-based approach, namely steroidomics. Steroids regulate essential biological functions including growth and reproduction, and perturbations of the steroid homeostasis can generate serious physiological issues; therefore, specific and sensitive methods have been developed to measure steroid concentrations. GC-MS measuring several steroids simultaneously was considered the first historical standard method for analysis. Steroids were then quantified by immunoassay, allowing a higher throughput; however, major drawbacks included the measurement of a single compound instead of a panel and cross-reactivity reactions. Targeted LC-MS methods with selected reaction monitoring (SRM) were then introduced for quantifying a small steroid subset without the problems of cross-reactivity. The next step was the integration of metabolomic approaches in the context of steroid analyses. As metabolomics tends to identify and quantify all the metabolites (i.e., the metabolome) in a specific system, appropriate strategies were proposed for discovering new biomarkers. Steroidomics, defined as the untargeted analysis of the steroid content in a sample, was implemented in several fields, including doping analysis, clinical studies, in vivo or in vitro toxicology assays, and more. This review discusses the current analytical methods for assessing steroid changes and compares them to steroidomics. Steroids, their pathways, their implications in diseases and the biological matrices in which they are analysed will first be described. Then, the different analytical strategies will be presented with a focus on their ability to obtain relevant information on the steroid pattern. The future technical requirements for improving steroid analysis will also be presented.