Estudo técnico relativo à instalação de micro eólicas em edifícios urbanos para microprodução de energia eléctrica

O Planeta Terra tem vindo a ser fustigado pelas alterações climáticas resultado da poluição ambiental provocada pelo Homem. Com o objectivo de minimizar estes efeitos deletérios, os países mais desenvolvidos estabeleceram compromissos relativamente às emissões de gases com efeito de estufa, tendo por base o Protocolo de Kyoto. A iniciativa «Renováveis na Hora» é uma das medidas previstas no plano para a política de energia e alterações climáticas, apresentado em Fevereiro de 2008, pelo Ministério da Economia e da Inovação Português. Actualmente, em Portugal, existe um mercado emergente para a microgeração, que se rege segundo a legislação aplicada recentemente, que estabelece o novo regime jurídico aplicável à produção de energia por intermédio de unidades de microprodução. Esta iniciativa levará à criação de um novo paradigma de exploração e utilização de energia. Deste modo, é fundamental avançar com alguns alertas das condições de exploração. A energia eólica é umas das fontes renováveis em que o rendimento de conversão pode atingir valores interessantes (poderá ser superior a 50%) e em determinadas regiões o seu potencial é bastante bom, nomeadamente em zonas litorais e em zonas montanhosas. Em ambiente urbano é impraticável a instalação de grandes torres eólicas, mas a micro produção baseada em pequenas turbinas eólicas é perfeitamente possível e desejável. O propósito deste trabalho é realizar um estudo de cariz técnico acerca da instalação de um mini parque eólico num edifício urbano, tendo em conta todas as condicionantes (velocidade do vento, obstáculos na zona, altura de montagem, inter-distância entre aerogeradores). Foi realizado um software que irá auxiliar a escolha dos aerogeradores e inversores para o tipo de local onde vai ser instalado o parque eólico.

Helical Twisting of Electrospun Liquid Crystalline Cellulose Micro- and Nanofibers

Helically twisted fibers can be produced by electrospinning liquid-crystalline cellulose solutions. Fiber topographies are studied by atomic force microscopy, scanning electron microscopy (see figure) and polarized optical microscopy. The fibers have a nearly universal pitch-to-diameter ratio and comprise both right- and left-handed helices.

Tuneable micro- and nano-periodic structures in urethane/urea networks

Micro- and nano-patterned materials are of great importance for the design of new nanoscale electronic, optical and mechanical devices, ranging from sensors to displays. A prospective system that can support a designed functionality is elastomeric polyurethane thin films with nano- or micromodulated surface structures ("wrinkles"). These wrinkles can be induced on different lengthscales by mechanically stretching the films, without the need for any sophisticated lithographic techniques. In the present article we focus on the experimental control of the wrinkling process. A simple model for wrinkle formation is also discussed, and some preliminary results reported. Hierarchical assembly of these tunable structures paves the way for the development of a new class of materials with a wide range of applications, from electronics to biomedicine.

Hélices e Espirais em Micro e Nanofibras Celulósicas

A celulose é o polímero renovável mais abundante do mundo. É conhecido pela sua excelente biocompatibilidade, propriedades térmicas e mecânicas. A celulose assim como os polipéptideos e o ADN, pertence a uma família de moléculas orgânicas que dão origem à formação de fases líquidas cristalinas (LCs) colestéricas. A Passiflora Edulis, tal como outras plantas trepadeiras, possui longas e flexíveis gavinhas que permitem à planta encontrar um suporte para se fixar. As gavinhas podem assumir a forma de espirais ou de hélices consoante sejam sustentadas por apenas uma ou por ambas as extremidades. As hélices apresentam muitas vezes duas porções helicoidais, uma esquerda e outra direita, separadas por um segmento recto denominado perversão. Este comportamento é consequência da curvatura intrínseca das gavinhas produzidas pela planta trepadeira. O mesmo comportamento pode ser observado em micro e nanofibras celulósicas fabricadas a partir de soluções líquido-cristalinas, numa escala três a quatro ordens de grandeza inferior à das gavinhas. Este facto sugere que o modelo físico utilizado tenha invariância de escala. Neste trabalho é feito o estudo de fibras e jactos que imitam as estruturas helicoidais apresentadas pelas gavinhas das plantas trepadeiras. As fibras e jactos são produzidos a partir de soluções líquidas cristalinas celulósicas. De modo a determinar as características morfológicas e estruturais, que contribuem para a curvatura das fibras, foram utilizadas técnicas de imagem por ressonância magnética (MRI), microscopia óptica com luz polarisada (MOP), microscopia electrónica de varrimento (SEM) e microscopia de força atómica (AFM) . A variação da forma das estruturas helicoidais com a temperatura parece ser relevante para o fabrico de membranas não tecidas para aplicação em sensores termo-mecânicos.

Self-mated tribological systems based on multilayer micro/nanocrystalline CVD diamond coatings

The tribological response of multilayer micro/nanocrystalline diamond coatings grown by the hot filament CVD technique is investigated. These multigrade systems were tailored to comprise a starting microcrystalline diamond (MCD) layer with high adhesion to a silicon nitride (Si3N4) ceramic substrate, and a top nanocrystalline diamond (NCD) layer with reduced surface roughness. Tribological tests were carried out with a reciprocating sliding configuration without lubrication. Such composite coatings exhibit a superior critical load before delamination (130–200 N), when compared to the mono- (60–100 N) and bilayer coatings (110 N), considering ∼10 µm thick films. Regarding the friction behaviour, a short-lived initial high friction coefficient was followed by low friction regimes (friction coefficients between 0.02 and 0.09) as a result of the polished surfaces tailored by the tribological solicitation. Very mild to mild wear regimes (wear coefficient values between 4.1×10−8 and 7.7×10−7 mm3 N−1 m−1) governed the wear performance of the self-mated multilayer coatings when subjected to high-load short-term tests (60–200 N; 2 h; 86 m) and medium-load endurance tests (60 N; 16 h; 691 m).

Micro-generation Evaluation of the Zero Emissions Technologies in the Portuguese Market

Micro-generation is the small scale production of heat and/or electricity from a low carbon source and can be a powerful driver for carbon reduction, behavior change, security of supply and economic value. The energy conversion technologies can include photovoltaic panels, micro combined heat and power, micro wind, heat pumps, solar thermal systems, fuel cells and micro hydro schemes. In this paper, a small research of the availability of the conversion apparatus and the prices for the micro wind turbines and photovoltaic systems is made and a comparison between these two technologies is performed in terms of the availability of the resource and costs. An analysis of the new legal framework published in Portugal is done to realize if the incentives to individualspsila investment in sustainable and local energy production is worth for their point of view. An economic evaluation for these alternatives, accounting with the governmentpsilas incentives should lead, in most cases, into attractive return rates for the investment. Apart from the attractiveness of the investment there are though other aspects that should be taken into account and those are the benefits that these choices have to us all. The idea is that micro-generation will not only make a significant direct contribution to carbon reduction targets, it will also trigger a multiplier effect in behavior change by engaging hearts and minds, and providing more efficient use of energy by householders. The diversified profile of power generation by micro-generators, both in terms of location and timing, should reduce the impact of intermittency or plant failures with significant gains for security of supply.

Contributions à la paleontology du Miocène moyen continental du basin du tage

This study on middle Miocene Charophytes from the Tagus'basin indicates the presence of two species. hitherto undescribed from these strata in Portugal, Correlation diagrams of height and width of gyrogonite demonstrate that the populations of Nitellopsis (Tectochara) etrusca from the localities Póvoa de Santarém and Pêro Filho are identical to that from La Grenatière (Hérault, France), The population of Lychnothamnus duplicicarinatus from Tremês is identical to that already known from Anwill (Switzerland). The age of this flora is therefore suggested as being the upper part of the middle Miocene. The results of Charophyte studies are in accordance with stratigraphical conclusions from previously conducted mammalian studies (Antunes and Mein), A table showing the distribution of species in the three portuguese localities is given.

Contributions à la paleontology du Miocène moyen continental du basin du tage

The lignite-clays of Póvoa de Santarém dated as Upper «Vindobonian» (mammalian zone MN6), fielded abundant remains of animals and plants (spores, pollens, seeds, etc.). The forms identified are indicative of several environments. Plants, either aquatic or belonging to swampy areas are predominant (Nuphar sp., Sparganium sp., Stratiotes kaltennordheimensis, cf. Ranunculus sp.). There are also remains of plants characteristiques of a humid rather than a swampy soil such as Polypodiaceae, Myrica ceriferiformis, Toddalia maii, Spirematospermum wetzeleri. The genera Vitis and Ephedra, although rare, point fowards the existence of drier regions in the neighbourhood. The presence of polens such as Picea indicate the presence at some distance less warm upland forest areas.

A reconnaissance study of Upper Jurassic sediments of the Lusitanian Basin

The Upper Jurassic evolution of the Lusitanian Basin is shown to be linked to the rifting phase which preceded the separation of Iberia and the Grand Banks. Structural controls on sedimentation include both NNE-SSW trending faults in the Hercynian basement, and contemporaneous movement of salt diapirs. At the beginning of Upper Oxfordian times, the entire basin had been levelled to within a few metres of sea level, so that the freshwater algal marsh and marginal marine facies of the Cabaços and Vale Verde Beds rest on Triassic to Callovian strata. In the latter part of the Upper Oxfordian. carbonate sedimentation continued, with fluctuating salinity lagoons in the north (Pholodomya protei Beds) separated from shallow open marine carbonates in the south (Montejunto Beds) by the Caldas da Rainha diapir-barrier island complex. The commencement of rifting is recorded in the Kimmeridgian by the sudden influx of terrigenous clastics (developed in both fluviatile and deltaic/submarine fan environments) and accelerated depositional rates in excess of 10cm/10 k.yrs in association with contemporaneous faulting along the SE margin of the Arruda sub-basin. The Caldas-Santa Cruz chain of diapiric structures continued to influence the distribution of carbonate and clastic sediments. In the Portlandian, a simpler facies pattern occurs, with fluviatile clastics interfingering to the south with shallow low energy carbonates.

Contributions à la paleontology du Miocène moyen continental du basin du Tage; (IV) Charophytes - Póvoa de Santarém, Pero Filho et Tremês

This study on middle Miocene Charophytes from the Tagus' basin indicates the presence of two species, hitherto undescribed from these strata in Portugal. Correlation diagrams of height and width of gyrogonite demonstrate that the populations of Nitellopsis (Tectochara) etrusca from the localities Póvoa de Santarém and Pêro Filho are identical to that from La Grenatière (Hérault, France), The population of Lychnothamnus duplicicarinatus from Tremês is identical to that already known from Anwill (Switzerland). The age of this flora is therefore suggested as being the upper part of the middle Miocene. The results of Charophyte studies are in accordance with stratigraphical conclusions from previously conducted mammalian studies (Antunes and Mein). A table showing the distribution of species in the three portuguese localities is given.

Contributions à la paleontology du Miocène moyen continental du basin du Tage; (V) les végètaux de Póvoa de Santarém (note préliminaire)

The lignite-clays of Póvoa de Santarém dated as Upper «Vindobonian» (mammalian zone MN6), fielded abundant remains of animals and plants (spores, pollens, seeds, etc.). The forms identified are indicative of several environments. Plants, either aquatic or belonging to swampy areas are predominant (Nuphar sp., Sparganium sp., Stratiotes kaltennordheimensis, cf. Ranunculus sp.). There are also remains of plants characteristiques of a humid rather than a swampy soil such as Polypodiaceae, Myrica ceriferiformis, Toddalia maii, Spirematospermum wetzeleri. The genera Vitis and Ephedra, although rare, point fowards the existence of drier regions in the neighbourhood. The presence of polens such as Picea indicate the presence at some distance less warm upland forest areas.

Les ostracodes du Miocène inférieur de la region de Lisbonne (basin du Tage)

Forty-five species of ostracoda from the Aquitanian of the Lisbon area, belonging in thirty-two genera, are presented. These are the first species belonging to this group reported for the Miocene formations in Portugal. Ostracoda assemblages are typical of fresh water, brackish and marine environments (littoral and inner continental shelf). References are made to the stratigraphically more significant species. Data on the paleoenvironments are also presented. A list of the studied species includes a comparison with their distribution in the Aquitaine and Rhone Miocene basins.

Uma nova proposta de tributação em IRC para as micro e pequenas empresas

Mestrado em Fiscalidade

Nouvelles espèces d’ostracodes du miocène du basin du Tage (Portugal)

Twelve new species of miocene ostracoda from the Tagus basin (Portugal) are described. Paleoenvironments concerning each of these species are given.

Caracterização hidráulica, hidrológica e do transporte sólido das principais linhas de água (ribeiras) do concelho de Câmara de Lobos: ilha da Madeira

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Hidráulica