Anomalous compressibility of ferropericlase throughout the iron spin cross-over

The thermoelastic properties of ferropericlase Mg(1-x)Fe(x)O (x = 0.1875) throughout the iron high-to-low spin cross-over have been investigated by first principles at Earth`s lower mantle conditions. This cross-over has important consequences for elasticity such as an anomalous bulk modulus (K(S)) reduction. At room temperature the anomaly is somewhat sharp in pressure but broadens with increasing temperature. Along a typical geotherm it occurs across most of the lower mantle with a more significant K(S) reduction at approximate to 1,400-1,600 km depth. This anomaly might also cause a reduction in the effective activation energy for diffusion creep and lead to a viscosity minimum in the mid-lower mantle, in apparent agreement with results from inversion of data related with mantle convection and postglacial rebound.

Lower Bounds on the State Complexity of Geometric Goppa Codes

We reinterpret the state space dimension equations for geometric Goppa codes. An easy consequence is that if deg G less than or equal to n-2/2 or deg G greater than or equal to n-2/2 + 2g then the state complexity of C-L(D, G) is equal to the Wolf bound. For deg G is an element of [n-1/2, n-3/2 + 2g], we use Clifford's theorem to give a simple lower bound on the state complexity of C-L(D, G). We then derive two further lower bounds on the state space dimensions of C-L(D, G) in terms of the gonality sequence of F/F-q. (The gonality sequence is known for many of the function fields of interest for defining geometric Goppa codes.) One of the gonality bounds uses previous results on the generalised weight hierarchy of C-L(D, G) and one follows in a straightforward way from first principles; often they are equal. For Hermitian codes both gonality bounds are equal to the DLP lower bound on state space dimensions. We conclude by using these results to calculate the DLP lower bound on state complexity for Hermitian codes.

A unified model of flames as gasdynamic discontinuities

Viewed on a hydrodynamic scale, flames in experiments are often thin so that they may be described as gasdynamic discontinuities separating the dense cold fresh mixture from the light hot burned products. The original model of a flame as a gasdynamic discontinuity was due to Darrieus and to Landau. In addition to the fluid dynamical equations, the model consists of a flame speed relation describing the evolution of the discontinuity surface, and jump conditions across the surface which relate the fluid variables on the two sides of the surface. The Darrieus-Landau model predicts, in contrast to observations, that a uniformly propagating planar flame is absolutely unstable and that the strength of the instability grows with increasing perturbation wavenumber so that there is no high-wavenumber cutoff of the instability. The model was modified by Markstein to exhibit a high-wavenumber cutoff if a phenomenological constant in the model has an appropriate sign. Both models are postulated, rather than derived from first principles, and both ignore the flame structure, which depends on chemical kinetics and transport processes within the flame. At present, there are two models which have been derived, rather than postulated, and which are valid in two non-overlapping regions of parameter space. Sivashinsky derived a generalization of the Darrieus-Landau model which is valid for Lewis numbers (ratio of thermal diffusivity to mass diffusivity of the deficient reaction component) bounded away from unity. Matalon & Matkowsky derived a model valid for Lewis numbers close to unity. Each model has its own advantages and disadvantages. Under appropriate conditions the Matalon-Matkowsky model exhibits a high-wavenumber cutoff of the Darrieus-Landau instability. However, since the Lewis numbers considered lie too close to unity, the Matalon-Matkowsky model does not capture the pulsating instability. The Sivashinsky model does capture the pulsating instability, but does not exhibit its high-wavenumber cutoff. In this paper, we derive a model consisting of a new flame speed relation and new jump conditions, which is valid for arbitrary Lewis numbers. It captures the pulsating instability and exhibits the high-wavenumber cutoff of all instabilities. The flame speed relation includes the effect of short wavelengths, not previously considered, which leads to stabilizing transverse surface diffusion terms.

Complex variable positive definite functions

In this paper we develop an appropriate theory of positive definite functions on the complex plane from first principles and show some consequences of positive definiteness for meromorphic functions.

The structural approach of a natrex model on equilibrium exchange rates

Following a general macroeconomic approach, this paper sets a closed micro-founded structural model to determine the long run real exchange rate of a developed economy. In particular, the analysis follows the structure of a Natrex model. The main contribution of this research paper is the development of a solid theoretical framework that analyse in depth the basis of the real exchange rate and the details of the equilibrium dynamics after any shock influencing the steady state. In our case, the intertemporal factors derived from the stock-flow relationship will be particularly determinant. The main results of the paper can be summarised as follows. In first place, a complete well-integrated structural model for long-run real exchange rate determination is developed from first principles. Moreover, within the concrete dynamics of the model, it is found that some convergence restrictions will be necessary. On one hand, for the medium run convergence the sensitivity of the trade balance to changes in real exchange rate should be higher that the correspondent one to the investment decisions. On the other hand, and regarding long-run convergence, it is also necessary both that there exists a negative relationship between investment and capital stock accumulation and that the global saving of the economy depends positively on net foreign debt accumulation. In addition, there are also interesting conclusions about the effects that certain shocks over the exogenous variables of the model have on real exchange rates.

La il·lustració britànica

Estudi elaborat a partir d’una estada a la School of Modern Languages de la University of London, Gran Bretanya, entre agost i desembre del 2006. L’objectiu de la recerca consisteix en exposar el moviment empirista a través de Hume, Locke, Berkeley i altres filòsofs del segle XVIII. A més, s’analitza la filosofia escocesa del sentit comú, ja que va influenciar la filosofia catalana durant la “Renaixença”. El seu fundador, Thomas Reid, és conegut perquè va introduir una filosofia que no seguia l’escepticisme dels filòsofs citats. Sintetitzant, Hume va afirmar que l’experiència del sentit consisteix exclusivament en idees o impressions subjectives en la ment. Una resposta aquest “sistema ideal” va ser la filosofia del sentit comú que es va desenvolupar com a reacció a l’escepticisme de David Hume i altres filòsofs escocesos. Contra aquest “sistema ideal” la nova escola considera que l’experiència ordinària dels homes dona instintivament certes creences de la pròpia existència; de la existència dels objectes reals directament percebuts; i de “principis bàsics” basats en creences morals i religioses. Entre 1816 a 1870 la doctrina escocesa va ser adoptada com a filosofia oficial a França. Els seus principis van obtenir força a través de Víctor Cousin i de la traducció de les obres de Thomas Reid al francès per Jouffroy. Serà doncs, a partir de les traduccions franceses que Ramon Martí d’Eixalà va introduir a Catalunya la filosofia escocesa (no existeix cap prova que Martí d’Eixalà hagués conegut les versions angleses de les obres de Reid). En conclusió, el moviment escocès del sentit comú va influenciar l’escola catalana de filosofia.

A Ghost in Daylight: Making Sense of Substance Misuse

The inability to deal with substance misuse is a universal human problem. No country has discovered a failsafe way of tackling it. In Ireland there is an annual public outcry about an ever-deepening drinking culture but once the outcry is over the problem subsides below consciousness. Strategies are created and launched and quickly forgotten. Everybody is aware of the problem in their own family or neighbourhood and everybody has their own opinion on causes and remedies. Why then does nothing seem to work? After demonstrating the shortcomings of previous models of addiction, Jack Houlahan identifies a pattern that all human use of substances has in common. In A Ghost in Daylight, the general reader will find many popular stereotypes re-examined in a way that will illuminate their own experience; the specialist addiction worker or researcher will find reason to challenge first principles; a new approach to counselling and advice work is suggested; the policy-maker will find a firm foundation for what will be the first attempt at an integrated policy for dealing with the range of issues we group under the title 'substance misuse'.This resource was contributed by The National Documentation Centre on Drug Use.

From caging to rouse dynamics in polymer melts with intramolecular barriers: a critical test of the mode coupling theory

By means of computer simulations and solution of the equations of the mode coupling theory (MCT),we investigate the role of the intramolecular barriers on several dynamic aspects of nonentangled polymers. The investigated dynamic range extends from the caging regime characteristic of glass-formers to the relaxation of the chain Rouse modes. We review our recent work on this question,provide new results, and critically discuss the limitations of the theory. Solutions of the MCT for the structural relaxation reproduce qualitative trends of simulations for weak and moderate barriers. However, a progressive discrepancy is revealed as the limit of stiff chains is approached. This dis-agreement does not seem related with dynamic heterogeneities, which indeed are not enhanced by increasing barrier strength. It is not connected either with the breakdown of the convolution approximation for three-point static correlations, which retains its validity for stiff chains. These findings suggest the need of an improvement of the MCT equations for polymer melts. Concerning the relaxation of the chain degrees of freedom, MCT provides a microscopic basis for time scales from chain reorientation down to the caging regime. It rationalizes, from first principles, the observed deviations from the Rouse model on increasing the barrier strength. These include anomalous scaling of relaxation times, long-time plateaux, and nonmonotonous wavelength dependence of the mode correlators.

From caging to rouse dynamics in polymer melts with intramolecular barriers: a critical test of the mode coupling theory

By means of computer simulations and solution of the equations of the mode coupling theory (MCT),we investigate the role of the intramolecular barriers on several dynamic aspects of nonentangled polymers. The investigated dynamic range extends from the caging regime characteristic of glass-formers to the relaxation of the chain Rouse modes. We review our recent work on this question,provide new results, and critically discuss the limitations of the theory. Solutions of the MCT for the structural relaxation reproduce qualitative trends of simulations for weak and moderate barriers. However, a progressive discrepancy is revealed as the limit of stiff chains is approached. This dis-agreement does not seem related with dynamic heterogeneities, which indeed are not enhanced by increasing barrier strength. It is not connected either with the breakdown of the convolution approximation for three-point static correlations, which retains its validity for stiff chains. These findings suggest the need of an improvement of the MCT equations for polymer melts. Concerning the relaxation of the chain degrees of freedom, MCT provides a microscopic basis for time scales from chain reorientation down to the caging regime. It rationalizes, from first principles, the observed deviations from the Rouse model on increasing the barrier strength. These include anomalous scaling of relaxation times, long-time plateaux, and nonmonotonous wavelength dependence of the mode correlators.

Jevons, Mill and the Private Laboratory of the Mind

In this paper the rift between Jevons and Mill over the method of political economy serves as a prehistory to recent attempts of behavioural economists to once again explain economic behaviour by taking recourse to mankind's physiology. While Mill relied on the association psychology and its introspective method to establish indubitable first principles, Jevons scorned all recourse to introspection. As exemplified for Jevons's theory of labour, psychophysiology gave Jevons the means to think about economic behaviour in terms of functional form, and promised its assessment by means of experiments. Thus levelling down the Victorian distinction between mind and matter, Jevons turned political economy into social physics.

Concentrated Winding Multiphase Permanent Magnet Machine Design and Electromagnetic Properties – Case Axial Flux Machine

Concentrated winding permanent magnet machines and their electromagnetic properties are studied in this doctoral thesis. The thesis includes a number of main tasks related to the application of permanent magnets in concentrated winding open slot machines. Suitable analytical methods are required for the first design calculations of a new machine. Concentrated winding machines differ from conventional integral slot winding machines in such a way that adapted analytical calculation methods are needed. A simple analytical model for calculating the concentrated winding axial flux machines is provided. The next three main design tasks are discussed in more detail in the thesis. The magnetic length of the rotor surface magnet machines is studied, and it is shown that the traditional methods have to be modified also in this respect. An important topic in this study has been to evaluate and minimize the rotor permanent magnet Joule losses by using segmented magnets in the calculations and experiments. Determination of the magnetizing and leakage inductances for a concentrated winding machine and the torque production capability of concentrated winding machines with different pole pair numbers are studied, and the results are compared with the corresponding properties of integral slot winding machines. The thesis introduces a new practical permanent magnet motor type for industrial use. The special features of the machine are based on the option of using concentrated winding open slot constructions of permanent magnet synchronous machines in the normal speed ranges of industrial motors, for instance up to 3000 min-1, without excessive rotor losses. By applying the analytical equations and methods introduced in the thesis, a 37 kW 2400 min-1 12-slot 10-pole axial flux machine with rotor-surfacemounted magnets is designed. The performance of the designed motor is determined by experimental measurements and finite element calculations.

Model-based estimation of liquid flows in the blast furnace hearth and taphole

This thesis presents a set of methods and models for estimation of iron and slag flows in the blast furnace hearth and taphole. The main focus was put on predicting taphole flow patterns and estimating the effects of various taphole conditions on the drainage behavior of the blast furnace hearth. All models were based on a general understanding of the typical tap cycle of an industrial blast furnace. Some of the models were evaluated on short-term process data from the reference furnace. A computational fluid dynamics (CFD) model was built and applied to simulate the complicated hearth flows and thus to predict the regions of the hearth exerted to erosion under various operating conditions. Key boundary variables of the CFD model were provided by a simplified drainage model based on the first principles. By examining the evolutions of liquid outflow rates measured from the furnace studied, the drainage model was improved to include the effects of taphole diameter and length. The estimated slag delays showed good agreement with the observed ones. The liquid flows in the taphole were further studied using two different models and the results of both models indicated that it is more likely that separated flow of iron and slag occurs in the taphole when the liquid outflow rates are comparable during tapping. The drainage process was simulated with an integrated model based on an overall balance analysis: The high in-furnace overpressure can compensate for the resistances induced by the liquid flows in the hearth and through the taphole. Finally, a recently developed multiphase CFD model including interfacial forces between immiscible liquids was developed and both the actual iron-slag system and a water-oil system in laboratory scale were simulated. The model was demonstrated to be a useful tool for simulating hearth flows for gaining understanding of the complex phenomena in the drainage of the blast furnace.

Les fonctions de la dialectique chez Aristote selon Topiques I,2

Le but de ce mémoire est d’expliciter en détail et de voir la portée d'un passage bien précis du traité des Topiques, ouvrage où Aristote tente d'élaborer une méthode qui permettra de raisonner de manière dialectique. Dans le deuxième chapitre du premier livre (I, 2), il énonce de manière succincte trois utilités que le traité en question peut procurer à celui qui possède et maîtrise adéquatement cette méthode. En premier lieu, la dialectique servirait de gymnastique intellectuelle pour former l'esprit et lui donner plus de souplesse dans ses raisonnements. Dans un second temps, elle serait utile dans les rencontres de tous les jours avec autrui parce qu’elle permettrait de discuter et d'argumenter sur un sujet donné avec le premier venu. Enfin, il semble également que la dialectique soit utile pour les «connaissances de caractère philosophique», en ce sens qu'elle permettrait de développer les apories et ultimement, d'établir les principes ou les notions premières de chaque science. Dans ce travail, je me propose donc d’examiner chacune de ces prétendues utilités afin de voir comment, et dans quelle mesure, nous pouvons réellement affirmer que la dialectique s’avère profitable pour chacun des services énumérés en Topiques I, 2.

Mathematical Modelling of the Dynamics of Granular Materials in a Rotating Cylinder

The current study is aimed at the development of a theoretical simulation tool based on Discrete Element Method (DEM) to 'interpret granular dynamics of solid bed in the cross section of the horizontal rotating cylinder at the microscopic level and subsequently apply this model to establish the transition behaviour, mixing and segregation.The simulation of the granular motion developed in this work is based on solving Newton's equation of motion for each particle in the granular bed subjected to the collisional forces, external forces and boundary forces. At every instant of time, the forces are tracked and the positions velocities and accelarations of each partcle is The software code for this simulation is written in VISUAL FORTRAN 90 After checking the validity of the code with special tests, it is used to investigate the transition behaviour of granular solids motion in the cross section of a rotating cylinder for various rotational speeds and fill fraction.This work is hence directed towards a theoretical investigation based on Discrete Element Method (DEM) of the motion of granular solids in the radial direction of the horizontal cylinder to elucidate the relationship between the operating parameters of the rotating cylinder geometry and physical properties ofthe granular solid.The operating parameters of the rotating cylinder include the various rotational velocities of the cylinder and volumetric fill. The physical properties of the granular solids include particle sizes, densities, stiffness coefficients, and coefficient of friction Further the work highlights the fundamental basis for the important phenomena of the system namely; (i) the different modes of solids motion observed in a transverse crosssection of the rotating cylinder for various rotational speeds, (ii) the radial mixing of the granular solid in terms of active layer depth (iii) rate coefficient of mixing as well as the transition behaviour in terms of the bed turnover time and rotational speed and (iv) the segregation mechanisms resulting from differences in the size and density of particles.The transition behaviour involving its six different modes of motion of the granular solid bed is quantified in terms of Froude number and the results obtained are validated with experimental and theoretical results reported in the literature The transition from slumping to rolling mode is quantified using the bed turnover time and a linear relationship is established between the bed turn over time and the inverse of the rotational speed of the cylinder as predicted by Davidson et al. [2000]. The effect of the rotational speed, fill fraction and coefficient of friction on the dynamic angle of repose are presented and discussed. The variation of active layer depth with respect to fill fraction and rotational speed have been investigated. The results obtained through simulation are compared with the experimental results reported by Van Puyvelde et. at. [2000] and Ding et at. [2002].The theoretical model has been further extended, to study the rmxmg and segregation in the transverse direction for different particle sizes and their size ratios. The effect of fill fraction and rotational speed on the transverse mixing behaviour is presented in the form of a mixing index and mixing kinetics curve. The segregation pattern obtained by the simulation of the granular solid bed with respect to the rotational speed of the cylinder is presented both in graphical and numerical forms. The segregation behaviour of the granular solid bed with respect to particle size, density and volume fraction of particle size has been investigated. Several important macro parameters characterising segregation such as mixing index, percolation index and segregation index have been derived from the simulation tool based on first principles developed in this work.

Incidencia de las agresiones a la seguridad cibernética en el desarrollo informático de las Fuerzas Armadas de Estados Unidos (2003-2013)

La presente investigación tiene como objetivo analizar la incidencia de las agresiones cibernéticas en el desarrollo informático de las Fuerzas Armadas de Estados Unidos. Los diferentes estudios que se han realizado sobre el ciberespacio se han enfocado en el papel del individuo como actor principal y se ha dejado de lado las repercusiones que éste ha tenido para el Estado, como un nuevo eje de amenazas. Teniendo en cuenta lo anterior, esta investigación demostrará a partir del concepto de securitización, que se busca priorizar la “ciberseguridad” dentro de la agenda del gobierno estadounidense. Al ser este un estudio que aborda experiencias concretas durante un periodo de tiempo de más de 10 años, el diseño metodológico de la investigación será longitudinal, ya que abarcará estudios, artículos, textos y resoluciones que se han realizado desde 2003 hasta la actualidad.