Estudo da flamabilidade e resistência à chama de compósito de poliéster insaturado e fibra da folha do abacaxizeiro (PALF)

In the present research work, composites were prepared using pine apple leaf fibres (PALF) as reinforcement with unsaturated polyester resin as matrix, incorporating with fire retardant at different compositions. The PALF was obtained from the decortication of pine apple leaves obtained from Ramada 4 from Ielmo Marinho in the State of Rio Grande do Norte. The unsaturated polyester resin and the catalyzer were bought from the local establishment. The fire retardant, aluminium tri-hydroxide - Al(OH)3 was donated by Alcoa Alumínio S.A and was used in the proportions of 20%, 40% and 60% w/w. Initially the fibres were treated with 2% NaOH for 1 hour, to remove any impurities present on the fibre surface, such as wax, fat, pectin and pectate, in order to have a better adsorption of the fibres with the matrix as well as the flame retardant. The fibre mat was prepared in a mat preparator by immersion, developed in the Textile Engineering Laboratory, at the UFRN. The composites (300x300x3 mm) were prepared by compression molding and the samples (150x25x3 mm) for analysis of the properties were cut randomly using a laser cutter. Some of the cut samples were used to measure the smoke emission and fire resistance using UL94 standard. Mechanical tension-extension and flexural properties were carried in CTGás RN and the Laboratório de Metais e Ensaios Mecânicos Engenharia de Materiais UFRN , as well as SEM studies were carried out at Núcleo de Estudos em Petróleo e Gás Natural - UFRN . From the observed results, it was noted that, there was no marked influence of the fire retardant on the mechanical properties. Also in the water absorption test, the quantity of water absorbed was less in the sample with higher concentration of fire retardant. It was also observed that the increase in the proportion of the fire retardant increased the time of burning, may be due to the compactness of the composite due to the presence of fire retardant as a filling material even though it was meant to reduce the rate of inflammability of the composite

Desenvolvimento e análise de material compósito a base de penas de frango (fibras de queratina-KF) e matriz de poliéster insaturado

Use of natural fibres as a reinforcement material in the manufacture of composites show a series of advantages: availability, biodegradability, low weight and regeneration in relation to synthetic fibres, thus justifying its utilization. In the present research work, composites were developed with chicken feathers (KF), using unsaturated polyester resin as matrix, for diversified applications, mainly in the furniture/timber industry.At present, in Brazil the chicken feathers are used as part of the animal feed, even though this material possesses low aggregated value. The chicken feathers are hollow, light and resistant. After washing with water at room temperature, a part of the chicken feathers were treated with 2% NaOH. Composites were manufactured using treated and untreated chicken feathers with unsaturated orthothalic polyester resin and 1% peroxide as catalyser, obtained in the commerce. Samples with size 150x25x3 mm for mechanical tests were cut by laser in the composite plate. Mechanical analyses were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN. All the analyses were in accordance with ASTM standards. SEM analyses were also carried out on the samples.In the analyses of the results obtained, it was observed that the composites made with untreated chicken feathers showed better results (Traction 11.406 MPa and 9.107 MPa Bending 34.947 and 20.918 MPa for samples with and without treatment respectively) compared to the composite with treated feathers. Very low values of the water absorption results, evidenced the impermeability characteristic of the feathers. From the SEM images, the structure, fracture and the fibre/matrix adsorption can be evidenced. In the flammability test, it was observed that despite the feathers having sulfur as a constituent, natural inhibitor of flame, no burning support of the composites, because the manufacturing process of the composite

Compósito reforçado com sisal para aplicação na moda

The objective of this research is the fabrication of a composite reinforced with dyed sisal fiber and polyester matrix for application in the fields such as, fashion, clothing, interior textiles; fashion accessories are some of the examples. For the fabrication of the composite, the sisal fibers were subjected to processes such as: chemical treatment with sodium hydroxide (NaOH) in the removal of impurities; bleaching for removing the yellowish color of the natural fiber and dyeing with direct dyes to confer the colors blue, green and orange. The search for new technologies ecologically correct has become a major concern in recent decades. Studies show that composite polymer reinforced by natural fibers is suitable for a large number of applications, and its use is advantageous in terms of economic and ecological. The dyed fibers were cut to a length of 30 mm, is used in the confection of webs. For this purpose, a web preparer by immersion, developed in the Laboratory of Chemical Textile of UFRN. The composite sheets measuring 300 x 300 x3 mm were molded by compression, with unsaturated orthophthalic polyester as matrix, and the samples in sizes 150 x 25 x 3 mm were cut with the aid of a laser machine, to be subjected to traction and flexion. The mechanical properties of traction and flexion in three points were performed in the Laboratory of metal and mechanical tests of Materials Engineering of UFRN. The resulting samples from the tests were evaluated in scanning electron microscope (SEM) at CTGas RN. On the basis of the analysis of the results from the mechanical tests, it was observed that the composite had good mechanical behavior, both in traction as in flexion. Furthermore, it was observed that in the water absorption test, the samples had a different percentage among themselves, this occurred due to the variation of density found in the fibre webs. The images of the SEM showed the failures from the manufacturing process and the adhesion of fibre/matrix. When the samples were prepared with the dyed fibers to be applied in fashion, the results were positive, and it can be concluded that the main objective of this work was achieved

Estudo comparativo das propriedades mecânicas em compósitos da fibra modal e poliester

In the present work, three composites with distinct reinforcements (polyester, modal e polyester + modal), all if a unsaturated orthophthalic polyester resin as matrix were used, in order to conduct a comparative study by mechanical tests and water absorption. The fibre mats were prepared in a mat preparatory by immersion developed in the Textile Engineering Laboratory. The composites were manufactured using a closed mould process by compression using an unsaturated orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as an initiator. In each composite twelve samples with the dimensions of 150x25x3 mm were cut randomly for the mechanical analysis (tension x extension, three points bending and water absorption and Scanning Electron Micsroscopy). The mechanical tests were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN . All the analyses were carried out according to the ASTM norms. The resultant samples from the mechanical analysis were subjected for the Scanning Electron Microscopy analysis. Based on the results obtained, it was observed that the reinforced composite with two fibres (modal + polyester) presented better results in comparison to the other two composites both in the tension/extension as well on the three point bending tests. In the water absorption test, it was possible to observe an equilibrium in the water absorption by the modal and polyester composite, due to the union of the two fibres. In the SEM images, the regions of rupture in the composites as well as the adsorption between the fiber and the matrix could be observed

Fabricação de eco-composito com a fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. The fibers were characterized and made matting (non-woven). The phases of the project were consisted to develop methods and to convert these fibers (booster) blended with polyester resin (matrix) in different proportions (10%, 20% and 30%) at the composite. Were studied fiber characteristics, mechanical properties of the composites, water absorption and scanning electron microscopy. Initially, the fibers were treated with solution of sodium hydroxide of 0.05 mols, and then taken to matting preparing at the textile engineering laboratory - UFRN. The composites were made by compression molding, using an orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as initiator (catalyst). To evaluate the mechanical tests (tensile and flexural) and water absorption were made twelve specimens with dimensions 150x25x3 mm were cut randomly. According to the standard method, tensile tests (ASTM 3039) bending tests (ASTM D790) were performed at the mechanical testing of metals at laboratory UFRN. The results of these tests showed that the composite reinforced with 30% had a better behavior when exposed to tension charge; while on the three points bending test showed that the composite reinforced with 10% had a better behavior. In the water absorption test it was possible to see that the highest absorption happened on the composite reinforced with 30%. In the micrographs, it was possible to see the regions of rupture and behavior of the composite (booster / matrix)

Influência da formação de pozolanas com adição de metacaulim em concreto de alta resistência

The need to build durable structures and resistant to harsh environments enabled the development of high strength concrete, these activities generate a high cement consumption, which implies factor in CO2 emissions. Often the desired strength is not achieved using only the cement composition. This study aims to evaluate the influence of pozzolans with the addition of metakaolin on the physical mechanics of high strength concrete comparing them with the standard formulation. Assays were performed to characterize the aggregates according to NBR 7211, evaluation of cement and coarse aggregate through the trials of petrography (NBR 15577-3/08) and alkali-aggregate reaction (NBR 15577-05/08). Specimens were fabricated according to NBR 5738-1/04 with additions of 0%, 4%, 6%, 8% and 10% of metakaolin for cement mortars CP V in the formulations. For evaluation of the concrete hardened in fresh state and scattering assays were performed and compressive strength in accordance with the NBR 7223/1992 and NBR 5739-8/94 respectively. The results of the characterization of aggregates showed good characteristics regarding size analysis and petrography, as well as potentially innocuous as the alkali-aggregate reaction. As to the test of resistance to compression, all the formulations with the addition of metakaolin showed higher value at 28 days of disruption compared with the standard formulation. These results present an alternative to reduce CO2 emissions, and improvements in the quality and durability of concrete, because the fine particle size of metakaolin provides an optimal compression of the mass directly influencing the strength and rheology of the dough

Validação de uma metodologia de ensaio de resistência ao cisalhamento para avaliação da aderência de interfaces revestimento metálico-bainha de cimento aplicada a poços de petróleo

Improving the adherence between oilwell metallic casing and cement sheath potentially decrease the number of corrective actions present/y necessary for Northeastern wells submitted to steam injection. In addition to the direct costs involved in the corrective operations, the economic impact of the failure of the primary cementing aIso includes the loss in the production of the well. The adherence between casing and cement is current/y evaluated by a simple shear tests non standardized by the American Petroleum Institute (API). Therefore, the objective of the present is to propose and evaluate a standardized method to assess the adherence of oilwell metallic casing to cement sheath. To that end, a section of a cemented oilwell was simulated and used to test the effect of different parameters on the shear stress of the system. Surface roughness and different cement compositions submitted or not to thermal cycling were evaluated. The results revealed that the test geometry and parameters proposed yielded different values for the shear stress of the system, corresponding to different adherent conditions between metallic casing and cement sheath

Olhar em terra de cego: a visualidade em Ensaio sobre a Cegueira

"Looking at earth from blind: travel in the visuality of the test on Blindness" is a literary Essay resulted from the experience of different points of view regarding the Essay on Blindness (1996), not only showing a Modern aesthetical tendency in dialog with the Baroque one, but also discussing subjects related to the History of Mentalities. The chapters are disposed as follows: The first one presents a short Excursus about the author and his work; the second one introduces the concept of Allegory exemplifying it with representative images of Romance; the third one presents tragic elements in dialog with the Bataille Eroticism in an Allegory of Feeling; the fourth one shows Stylistic Features used as a display mean of Comedy in Romance going towards the musicalness, being the features used to provoke laugh; the fifth and last one discusses about the study pertinence. To conclude, in favor of a Sight Education, the study considered authors such as: Ariès (1977), Bataille (2003), Bakhtin (2002, 2000, 1999), Benjamin (2000, 1996), Chauí (2005, 2000), Foucault (2006, 2005, 2004, 2002), Freud (1970), Hansen (2006), Lino (2004), Sartre (2005), Vovelle (1996)

O ensaio jornalístico na revista Veja: uma análise multidimensional

This work has as objective generality to make a multidimensional analysis in the genre journalistic assay, communicative genre that, beyond complex and multimodal, presents hybrid characteristics. Specifically, with the intention to propose defining criteria of the cited genre, this research looks for to establish differences and similarities between the assay and other genres of the same sphere, from the description and interpretation of used multimodal resources. The analysis of the formal, schematical and rhetorical resources identified in the formatting of the journalistic assay sample that the analyses are supported in the socio-semiotic and socio-rhetorical approaches. In the formal dimension, we contemplate elements that constitute design of the text, including the forms of representation from the typography, the colors, images, as well as the aspects communicative-linguistics: the modalization indices, the communicative operators and the category time; in the schematical dimension, we present the organizational structure, considering the rhetorical movements postulates for Swales (1990) and in the rhetorical dimension we observe the categories: who writes, for who it writes, on what it writes and where writes. The adopted methodologicals postulates are of qualitative nature and the procedure is documentary, data that in we are valid them written texts of this genre as analysis object. Corpus it is constituted by a composed sample for 14 extracted texts of a set of 173 propagated journalistic assays weekly for the magazine Veja, in the period between August of 2004 and January of 2008. The analysis of the data showed that the journalistic assay, object of this study, materializes through multiple symbolic representations and multiple subjects that turn since a small episode of the daily facts of great social relevance in the present time, of historical and cultural nature, nationwide or international. Used for the first time by Montaigne in 1580, to assign, in saying of the proper author, written fast on its life and historical events, which could nor be remembered later , the term `assay' was enriched with other specifications, of form to enclose the one that if they call scientific assay today, academic assay, journalistic assay and other types of specific assays. These denominations have to see with the enrollment of the members of diverse of practices communities, in virtue of the multiplicity of activities carried through in these spheres. The conclusions the one that we arrive had been the following ones: 1. the discursive genre is not a pure entity, in virtue of the multiplicity of situations where the sorts if insert in the social actions; 2. the institutions define the configuration of one definitive genre, also its proper assignment, since for backwards of all discursive genre a voice exists to discipline - institutional voice, and in the case of the assays for analyzed us, the institutional voice if it presents, really, as a defining trace; 3. the journalistic assay, for its multiple symbolic representations, multiple subjects and for passing explicit or implicit opinions of its author, resembles it other genres, being able, therefore, to be inserted in a colony of opinionatives genres

Estabelecimento de condições para ensaio de dissolução de cápsulas de cinarizina empregando planejamento fatorial

This work describes the establishment of dissolution test conditions for 75 mg cinnarizine capsules using a multivariate approach. A 2³ full factorial design was carried out to achieve the best conditions and HCl 0.1 mol L-1 as dissolution medium, basket as apparatus at 100 rpm and collect time at 30 min were considered adequate. The quantification was carried out by spectrophotometry at 251 nm. Both dissolution procedure and analytical method were validated and all parameters were within the acceptable limits. Since there is no official monograph for this pharmaceutical product, this dissolution test could be applied for quality control routine.

Efeitos do alongamento e do aquecimento no desempenho isocinético e na atividade eletromiográfica do músculo bíceps femoral ensaio clínico randomizado

To evaluate the effects of warm-up and stretching, singly or combined, on isokinetic performance and electromyographic activity of the biceps femoris. Materials and methods: Sixty-four volunteers of both sexes, with mean age of 23,1 ± 3,5 years and mean body mass index of 23,5 ± 2,5 Kg/m2 were randomly assigned into 4 groups: control, warm-up (stationary bicycle for 10 minutes), stretching (4 sets of 30 seconds of hamstring muscles static stretching) and warm-up + stretching. All the volunteers were submitted to evaluation pre and post-intervention of the muscle latency time and biceps femoris RMS and the passive torque, peak torque and power of the hamstring muscles. Results: The warm-up + stretching group had reduction of muscle latency time. There was a reduction of RMS during passive torque evaluation in stretching group. The RMS during isometric evaluation was reduced in all experimental groups. The RMS during eccentric evaluation showed reduction in control and warm-up + stretching groups. The passive torque and the eccentric peak torque had no significant differences pre to post-intervention in any group. There was reduction in isometric peak torque in all groups. Conclusion: The warm-up and stretching, when applied in combination can reduce the muscle latency time; stretching protocol promoted neural changes; the protocols used did not alter the muscle viscoelastic properties

Influência do biofeedback no treino de marcha de sujeitos hemiparéticos: ensaio clínico randomizado

BACKGROUND: Treadmill training with partial body weight support (BWS) has shown many benefits for patients after a stroke. But their findings are not well known when combined with biofeedback. OBJETIVE: The purpose of this study was to evaluate the immediate effects of biofeedback, visual and auditory, combined with treadmill training with BWS on on walking functions of hemiplegic subjects. METHODS: We conducted a clinical trial, randomized controlled trial with 30 subjects in the chronic stage of stroke, underwent treadmill training with BWS (control), combined with visual biofeedback, given by the monitor of the treadmill through the symbolic appearance of feet as the subject gave the step; or auditory biofeedback, using a metronome with a frequency of 115% of the cadence of the individual. The subjects were evaluated by kinematics, and the data obtained by the Motion Analysis System Qualisys. To assess differences between groups and within each group after training was applied to ANOVA 3 x 2 repeated measures. RESULTS: There were no statistical differences between groups in any variable spatio-temporal and angular motion, but within each group there was an increase in walking speed and stride length after the training. The group of visual biofeedback increased the stance period and reduced the swing period and reason of symmetry, and the group auditory biofeedback reduced the double stance period. The range of motion of the knee and ankle and the plantar flexion increased in the visual biofeedback group. CONCLUSION: There are no differences between the immediate effects of gait training on a treadmill with BWS performed with and without visual or auditory biofeedback. However, the visual biofeedback can promote changes in a larger number of variables spatiotemporal and angular gait

Influência do kinesio taping® no desempenho neuromuscular do quadríceps femoral e na função do membro inferior em sujeitos saudáveis: ensaio clínico, controlado, randomizado, cego

Objective:To analyze the immediate effects of the Kinesio Taping® application on the quadriceps neuromuscular performance, postural balance and lower limb function in healthy subjects. Materials andmethods:This is a randomized, controlled, blinded clinical trial. Sixtyfemale volunteers(age: 23.3±2.5 years old, BMI: 22.2±2.1kg/m2)wererandomly assigned intothreegroups with20memberseach,and performedone of these threeprotocols: control -10 minutesof rest,experimental 1- patch application ontherectusfemoris (RF), vastuslateralis(VL) and vastusmedialis(VM) and experimental 2-KT application on the same muscles. Allunderwent an evaluationfor singleand triple hop distance, postural balance (baropodometry), joint position sense(JPS), peak torque (concentric and eccentricevaluation at 60°/s)and electromyographic activityof VL,before andafter intervention.Results: There wasasignificant increasein the jump distanceof thethreestudied groups,with no differencebetween groups.There were nosignificant changesin postural balance,JPS, concentricpeak torqueand RMSof the VLin none of the groups. There was a reduction ineccentricpeak torquein all groups, without differencesbetween groups.Conclusion:The KT application on the RF, VL and VMmusclesis not able tosignificantly improvelower limbfunction and postural balance, as well as the kneeextensor peaktorque, JPSand the VL muscleactivation amplitudeof healthy women.

Efeito do tempo de repouso após fadiga induzida no desempenho neuromuscular do quadríceps femoral: ensaio clínico, controlado, randomizado, cego

Objective: To evaluate the effect of different resting periods, after induced muscle fatigue, in the quadriceps femoris neuromuscular performance, in healthy subjects. Methods: Sixty-four volunteers, of both genders, with an average of 21,8 ± 1,7 years and mean body mass index of 24,2 ± 3,7 Kg/m2 were randomly assigned into 4 groups: control group (was not induced fatigue); Experimental Group 1 (Exp. 1 1 minute of rest after fatigue); Experimental Group 3 (Exp. 3 3 minutes of rest after fatigue) and Experimental Group 5 (Exp. 5 5 minutes of rest after fatigue). The subjects were evaluated to the knee´s joint position sense (JPS), followed by 5 flexion-extension knee concentric isokinetic contractions at 60°/s, with concomitant recording of median frequency (Fmed) of rectus femoris (RF), vastus lateralis (VL) and vastus medialis (VM). Then they underwent a muscle fatigue protocol (30 flexion-extension knee concentric contractions at 60°/s) and were reevaluated on the isokinetic performance, Fmed and JPS. Blood lactate levels were measured before initial assessment, immediately after the fatigue protocol and 5 minutes after the end of the rest period. Results: The adoption of 3 minutes of rest was sufficient to restore the initial conditions for the peak torque normalized by body weight and the VL and VM Fmed. The joint position sense returned to its initial values with 1 minute rest. The lactate concentration remained high regardless of the adopted rest period. Conclusion: The use of 3-minute rest period is sufficient for the reestablishment of the neuromuscular parameters to the pre fatigue values.

Efeitos do treinamento de marcha sobre superfícies inclinadas em indivíduos com hemiparesia crônica: ensaio clínico controlado randomizado

Among the therapeutic approaches that can be used to achieve this goal is the gait training on sloping surfaces, but there are few scientific findings that elucidate the results of this practice. OBJECTIVE: To evaluate the effects of training on sloping surfaces on the gait of subjects with chronic hemiparesis. MATERIALS AND METHODS: A controlled, randomized, blinded clinical trial was conducted. Concluded the study twenty-four subjects with age between 40 and 70 years (54,91±9,3). Their neurological function, functional independence, motor function and balance assessed, besides the gait evaluation through kinemetry. The subjects were allocated into two groups: control group (CG) underwent gait training on treadmill with partial body weight support (PBWS) without inclination; and the experimental group (EG) submitted to gait training on treadmill with PBWS and inclination of 10%. Twelve training sessions were performed. The paired t Student test and Wilcoxon test were used in statistical analysis to compare findings before and after training for each group, and the t student test for independent samples and Mann-Whitney.test were used to compare the to groups. RESULTS: After training within-group changes were observed on balance recovery, motor function and functionality, in both experimental conditions. The EG showed changes after training on speed, stride length, step length of paretic and non-paretic side, paretic single support, double support time and non-paretic swing time. The CG the differences were detected on double support, paretic single support and hip range of movement. The EG showed better results when compared to CG on the variables: speed (p=0,034), non-paretic single support (p=0,02) and paretic swing time (p=0,02). CONCLUSION: gait training on sloping surfaces represents a promising strategy for gait training of subjects with chronic hemiparesis since it is can influence a greater number of gait variables, when compared with gait training on flat surface