An analysis of human behaviour during aircraft evacuation situations using the AASK v3.0 database

The Aircraft Accident Statistics and Knowledge (AASK) database is a repository of survivor accounts from aviation accidents. Its main purpose is to store observational and anecdotal data from the actual interviews of the occupants involved in aircraft accidents. The database has wide application to aviation safety analysis, being a source of factual data regarding the evacuation process. It is also key to the development of aircraft evacuation models such as airEXODUS, where insight into how people actually behave during evacuation from survivable aircraft crashes is required. This paper describes recent developments with the database leading to the development of AASK v3.0. These include significantly increasing the number of passenger accounts in the database, the introduction of cabin crew accounts, the introduction of fatality information, improved functionality through the seat plan viewer utility and improved ease of access to the database via the internet. In addition, the paper demonstrates the use of the database by investigating a number of important issues associated with aircraft evacuation. These include issues associated with social bonding and evacuation, the relationship between the number of crew and evacuation efficiency, frequency of exit/slide failures in accidents and exploring possible relationships between seating location and chances of survival. Finally, the passenger behavioural trends described in analysis undertaken with the earlier database are confirmed with the wider data set.

A case study of the effectiveness of the electronic survey as a research tool for measuring students' experience of e-learning

This paper uses a case study approach to consider the effectiveness of the electronic survey as a research tool to measure the learner voice about experiences of e-learning in a particular institutional case. Two large scale electronic surveys were carried out for the Student Experience of e-Learning (SEEL) project at the University of Greenwich in 2007 and 2008, funded by the UK Higher Education Academy (HEA). The paper considers this case to argue that, although the electronic web-based survey is a convenient method of quantitative and qualitative data collection, enabling higher education institutions swiftly to capture multiple views of large numbers of students regarding experiences of e-learning, for more robust analysis, electronic survey research is best combined with other methods of in-depth qualitative data collection. The advantages and disadvantages of the electronic survey as a research method to capture student experiences of e-learning are the focus of analysis in this short paper, which reports an overview of large-scale data collection (1,000+ responses) from two electronic surveys administered to students using surveymonkey as a web-based survey tool as part of the SEEL research project. Advantages of web-based electronic survey design include flexibility, ease of design, high degree of designer control, convenience, low costs, data security, ease of access and guarantee of confidentiality combined with researcher ability to identify users through email addresses. Disadvantages of electronic survey design include the self-selecting nature of web-enabled respondent participation, which tends to skew data collection towards students who respond effectively to email invitations. The relative inadequacy of electronic surveys to capture in-depth qualitative views of students is discussed with regard to prior recommendations from the JISC-funded Learners' Experiences of e-Learning (LEX) project, in consideration of the results from SEEL in-depth interviews with students. The paper considers the literature on web-based and email electronic survey design, summing up the relative advantages and disadvantages of electronic surveys as a tool for student experience of e-learning research. The paper concludes with a range of recommendations for designing future electronic surveys to capture the learner voice on e-learning, contributing to evidence-based learning technology research development in higher education.

Characterisation of freeze-dried wafers and solvent evaporated films as potential drug delivery systems to mucosal surfaces

Freeze-dried (lyophilised) wafers and solvent cast films from sodium alginate (ALG) and sodium carboxymethylcellulose (CMC) have been developed as potential drug delivery systems for mucosal surfaces including wounds. The wafers (ALG, CMC) and films (CMC) were prepared by freeze-drying and drying in air (solvent evaporation) respectively, aqueous gels of the polymers containing paracetamol as a model drug. Microscopic architecture was examined using scanning electron microscopy, hydration characteristics with confocal laser scanning microscopy and dynamic vapour sorption. Texture analysis was employed to investigate mechanical characteristics of the wafers during compression. Differential scanning calorimetry was used to investigate polymorphic changes of paracetamol occurring during formulation of the wafers and films. The porous freeze-dried wafers exhibited higher drug loading and water absorption capacity than the corresponding solvent evaporated films. Moisture absorption, ease of hydration and mechanical behaviour were affected by the polymer and drug concentration. Two polymorphs of paracetamol were observed in the wafers and films, due to partial conversion of the original monoclinic to the orthorhombic polymorph during the formulation process. The results showed the potential of employing the freeze-dried wafers and solvent evaporated films in diverse mucosal applications due to their ease of hydration and based on different physical mechanical properties exhibited by both type of formulations.

Acquisition of continuous plankton recorder data

The Continuous Plankton Recorder has been deployed on a seasonal basis in the north Pacific since 2000, accumulating a database of abundance measurements for over 290 planktonic taxa in over 3,500 processed samples. There is an additional archive of over 10,000 samples available for further analyses. Exxon Valdez Oil Spill Trustee Council financial support has contributed to about half of this tally, through four projects funded since 2002. Time series of zooplankton variables for sub-regions of the survey area are presented together with abstracts of eight papers published using data from these projects. The time series covers a period when the dominant climate signal in the north Pacific, the Pacific Decadal Oscillation (PDO), switched with unusual frequency between warm/positive states (pre-1999 and 2003-2006) and cool/negative states (1999-2002 and 2007). The CPR data suggest that cool negative years show higher biomass on the shelf and lower biomass in the open ocean, while the reverse is true in warm (PDO positive) years with lower shelf biomass (except 2005) and higher oceanic biomass. In addition, there was a delay in plankton increase on the Alaskan shelf in the colder spring of 2007, compared to the warmer springs of the preceding years. In warm years, smaller species of copepods which lack lipid reserves are also more common. Availability of the zooplankton prey to higher trophic levels (including those that society values highly) is therefore dependent on the timing of increase and peak abundance, ease of capture and nutritional value. Previously published studies using these data highlight the wide-ranging applicability of CPR data and include collaborative studies on; phenology in the key copepod species Neocalanus plumchrus, descriptions of distributions of decapod larvae and euphausiid species, the effects of hydrographic features such as mesoscale eddies and the North Pacific Current on plankton populations and a molecularbased investigation of macro-scale population structure in N. cristatus. The future funding situation is uncertain but the value of the data and studies so far accumulated is considerable and sets a strong foundation for further studies on plankton dynamics and interactions with higher trophic levels in the northern Gulf of Alaska.

A multinational, randomised, 12-week study comparing the effects of donepezil and galantamine in patients with mild to moderate Alzheimer's disease

To compare directly, in the same patient cohort, the ease of use and tolerability of donepezil and galantamine in the treatment of Alzheimer's disease (AD), and investigate the effects of both treatments on cognition and activities of daily living (ADL).

The Effects of Several Paper Characteristics and Application Methods on the Sublimation Rate of Cyclododecane

Cyclododecane (CDD) is a waxy, solid cyclic hydrocarbon (C12H24) that sublimes at room temperature and possesses strong hydrophobicity. In paper conservation CDD is used principally as a temporary fixative of water-soluble media during aqueous treatments. Hydrophobicity, ease of reversibility, low toxicity, and absence of residues are reasons often cited for its use over alternative materials although the latter two claims continue to be debated in the literature. The sublimation rate has important implications for treatment planning as well as health and safety considerations given the dearth of reliable information on its toxicity and exposure limits. This study examined how the rate of sublimation is affected by fiber type, sizing, and surface finish as well as delivery in the molten phase and as a saturated solution in low boiling petroleum ether. The effect of warming the paper prior to application was also evaluated. Sublimation was monitored using gravimetric analysis after which samples were tested for residues with gas chromatography-flame ionization detection (GC-FID) to confirm complete sublimation. Water absorbency tests were conducted to determine whether this property is fully reestablished. Results suggested that the sublimation rate of CDD is affected minimally by all of the paper characteristics and application methods examined in this study. The main factors influencing the rate appear to be the thickness and mass of the CDD over a given surface area as well as temperature and ventilation. The GC-FID results showed that most of the CDD sublimed within several days of its disappearance from the paper surface regardless of the application method. Minimal changes occurred in the water absorbency of the samples following complete sublimation.

Drug Delivery of Aminolevulinic Acid from Topical Formulations Intended for Photodynamic Therapy

Topical photodynamic therapy is used for a variety of malignant and pre-malignant skin disorders, including Bowen's Disease and Superficial Basal Cell Carcinoma. A haem precursor, typically 5-aminolevulinic acid (ALA), acting as a prodrug, is absorbed and converted by the haem biosynthetic pathway to photoactive protoprophyrin IX (PpIX), which accumulates preferentially in rapidly dividing
cells. Cell destruction occurs when PpIx is activated by an intense light source of appropriate wavelength. Topical delivery of ALA avoids the prolonged photosensitivity reactions associated with systemic administration of photosensitisers but its clinical utility is influenced by the tissue penetration characteristics of the drug, its ease of application and the stability of the active agent in the applied dose. This review, therefore, focuses on drug delivery applications for topical, ALA-based PDT. Issues considered in detail include physical and chemical enhancement strategies for tissue penetration of ALA and subsequent intracellular accumulation of PpIX, together with formulation strategies and drug delivery design solutions appropriate to various clinical applications. The fundamental aspects of drug diffusion in
relation to the physicochemical properties of ALA are reviewed and specific consideration is given to the degradation pathways of ALA in formulated systems that, in turn, influence the design of stable topical formulations.

Spin-Polarization Mechanisms of the Nitrogen-Vacancy Center in Diamond

The nitrogen-vacancy (NV) center in diamond has shown great promise for quantum information due to the ease of initializing the qubit and of reading out its state. Here we show the leading mechanism for these effects gives results opposite from experiment; instead both must rely on new physics. Furthermore, NV centers fabricated in nanometer-sized diamond clusters are stable, motivating a bottom-up qubit approach, with the possibility of quite different optical properties to bulk.

Using Room Temperature Ionic Liquids as Solvents to Probe Structural Effects in Electro-Reduction Processes. Electrochemical Behavior of Mutagenic Disperse Nitroazo Dyes in Room Temperature Ionic Liquids

The electrochemical reduction of the disperse azo dyes Red1, Red13 and Orange1 (Or1) was investigated in the RTILs [C(4)mim][NTf2] and [C(4)mpyrr][NTf2], and in contrast with their behavior in conventional aprotic solvents, was shown to proceed via a reversible one electron step to form stable radical anion, which is further reduced at more negative potentials to the dianion. In [C(4)mpyrr][NTf2], cleavage of the N-H bond on the secondary amine was inferred for Orange1, and the ease at which this cleavage occurred is rationalized in terms of acidity of the amine moiety. The ease of reduction was observed to decrease in the order Or1 > Red13 > Red1, and is related to the electron delocalization within the molecule and the electron withdrawing power of the substituents.

Comparison of ELISA and SPR biosensor technology for the detection of paralytic shellfish poisoning toxins

An enzyme labeled immunosorbent assay (ELISA) and surface plasmon resonance (SPR) biosensor assay for the detection of paralytic shellfish poisoning (PSP) toxins were developed and a comparative evaluation was performed. A polyclonal antibody (BC67) used in both assay formats was raised to saxitoxin–jeffamine–BSA in New Zealand white rabbits. Each assay format was designed as an inhibition assay. Shellfish samples (n = 54) were evaluated by each method using two simple rapid extraction procedures and compared to the AOAC high performance liquid chromatography (HPLC) and the mouse bioassay (MBA). The results of each assay format were comparable with the HPLC and MBA methods and demonstrate that an antibody with high sensitivity and broad specificity to PSP toxins can be applied to different immunological techniques. The method of choice will depend on the end-users needs. The reduced manual labor and simplicity of operation of the SPR biosensor compared to ELISA, ease of sample extraction and superior real time semi-quantitative analysis are key features that could make this technology applicable in a high-throughput monitoring unit.

Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading

Cold-formed steel sections are often used as wall studs or floor joists; such sections often include web holes for ease of installation of the services. Cold-formed steel design codes, however, do not consider the effect of such web holes. In this paper, a combination of experimental tests and non-linear elasto-plastic finite element analyses are used to investigate the effect of such holes on web crippling under interior-two-flange (ITF) loading conditions; the cases of both flange fastened and flange unfastened are considered. A good agreement between the experimental tests and finite element analyses was obtained. The finite element model was then used for the purposes of a parametric study on the effect of different sizes and position of holes in the web. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, and the ratio of the distance from the edge of the bearing to the flat depth of web. Design recommendations in the form of web crippling strength reduction factors are proposed, that are conservative to both the experimental and finite element results.

A comparative study of qualitative immunochemical screening assays for the combined measurement of T-2/HT-2 in cereals and cereal-based products

Many different immunochemical platforms exist for the screening of naturally occurring contaminants in food from the low cost enzyme linked immunosorbent assays (ELISA) to the expensive instruments such as optical biosensors based on the phenomenon of surface plasmon resonance (SPR). The primary aim of this study was to evaluate and compare a number of these platforms to assess their accuracy and precision when applied to naturally contaminated samples containing HT-2/T-2 mycotoxins. Other important factors considered were the speed of analysis, ease of use (sample preparation techniques and use of the equipment) and ultimately the cost implications. The three screening procedures compared included an SPR biosensor assay, a commercially available ELISA and an enzyme-linked immunomagnetic electrochemical array (ELIME array). The qualitative data for all methods demonstrated very good overall agreements with each other, however on comparison with mass spectrometry confirmatory results, the ELISA and SPR assay performed slightly better than the ELIME array, exhibiting an overall agreement of 95.8% compared to 91.7%. Currently, SPR is more costly than the other two platforms and can only be used in the laboratory whereas in theory both the ELISA and ELIME array are portable and can be used in the field, but ultimately this is dependent on the sample preparation techniques employed. Sample preparative techniques varied for all methods evaluated, the ELISA was the most simple to perform followed by that of the SPR method. The ELIME array involved an additional clean-up step thereby increasing both the time and cost of analysis. Therefore in the current format, field use would not be an option for the ELIME array. In relation to speed of analysis, the ELISA outperformed the other methods.

Current and possible future methods of assessing the activities of photocatalyst films

The continuing interest in semiconductor photochemistry, SPC, and the emergence of commercial products that utilise films of photocatalyst materials, has created an urgent need to agree a set of methods for assessing photocatalytic activity and international committees are now meeting to address this issue. This article provides a brief overview of two of the most popular current methods employed by researchers for assessing SPC activity. and one which has been published just recently and might gain popularity in the future, given its ease of use. These tests are: the stearic acid (SA) test, the methylene blue (MB) test and the resazurin (Rz) ink test, respectively. The basic photochemical and chemical processes that underpin each of these tests are described, along with typical results for laboratory made sol-gel titania films and a commercial form of self-cleaning glass, Activ (TM). The pros and cons of their future use as possible standard assessment techniques are considered. (C) 2007 Elsevier B.V. All rights reserved.

Textural, viscoelastic and mucoadhesive properties of pharmaceutical gels composed of cellulose polymers

This study examined the mechanical/textural, viscoeiastic and mucoadhesive properties of a range of aqueous gels composed of either hydroxyethylcellulose (HEC) or sodium carboxymethylcellulose (Na CMC). The mechanical/textural properties of each formulation were determined using texture profile analysis. The viscoelastic properties of each formulation were examined over a defined frequency range (0.01-1.0 Hz) using oscillatory rheometry in conjunction with stainless steel parallel plate geometry. The mucoadhesive properties of the gels were evaluated by measuring the tensile force required to overcome the gel/mucin adhesive interaction. Both gel hardness and compressibility, properties that affect the ease of product removal from a container and spreadability, increased as a function of increasing polymer concentrations. This is attributed to the effects of HEC and Na CMC on gel viscosity. Gel adhesiveness, a property related to bioadhesion, also increased as a function of polymer concentration and is attributed to the reported adhesive nature of these polymers. Increasing frequency of oscillation increased the storage and loss moduli yet decreased bath the dynamic viscosity of each gel type and also the loss tangent of HEC (but not Na CMC) gels. Therefore, following exposure to the range of oscillatory stresses that may be expected in vivo, HEC gels will be more susceptible than Na CMC gels to alterations in these rheological properties. Consequently, it would be expected that the clinical performance of HEC gels will be modified to a greater extent than Na CMC gels. In general, HEC gels exhibited a greater elastic nature than Na CMC gels over the frequency range employed for oscillation The storage and loss moduli and dynamic viscosity of both gel types increased, yet the loss tangent of both gel types decreased as a function of increasing polymer concentration. Gel mucoadhesive strength was dependent on both the time of contact of the formulation with mucin and also on polymer concentration. In conclusion, this study has characterised a number of gels containing either HEC or Na CMC in terms of their mechanical/textural, viscoelastic and mucoadhesive properties. Due to its relevance to the clinical performance, it is suggested that the information derived from these methods may be usefully combined to provide a more rational basis for the selection of polymers and their formulation as topical drug delivery systems. (C) 1997 Elsevier Science B.V.

Living in Exospace: ISS and Discovery 1

The concept of exospace, as an alternative liveable structure, is discussed in this article to improve our comprehension of architectural space. Exospace is a man-made space designed for living beyond Earth’s atmosphere. Humankind has developed outerspace technologies to build the International Space Station as a significant experiment in exospace design. The ISS is a new building type for scientific experiments and for testing human existence in outerspace.

A fictional example of exospace, on the other hand, is Discovery 1 spaceship in Stanley Kubrick’s legendary science fiction film 2001: A Space Odyssey (1968). It is a ship travelling to Jupiter with a crew of five astronauts and HAL9000, the artificial intelligence controlling the ship. I will first discuss the ISS, and the space stations built before, from a spatial point of view. A spatial study of Discovery 1 will follow. Finally, through an understanding of exospace, I will return to architectural space with a critical appraisal. The comparison of architectural space with exospace will add to the discussion of space theories from a technological approach.

Exospace creates an alternative reality to architectural space. Architects cannot consider exospaces without comparing them with the spaces they design on Earth. The different context of outerspace shows that a work of terrestrial architecture is very much dependent on its context. A building is not an ‘object’ that can be located anywhere; it is designed for its site. Architectural space is a real, material, continuous, static and extroverted habitable space designed for and used in the specific physical context of Earth. The existence of exospace in science opens a new discussion in architectural theory, both terrestrial and extraterrestrial.