ESTUDO DA GLICOSILAÇÃO DO CICLO-HEXANOL COM DIFERENTES DERIVADOS DE D-GLICOSAMINA E PROMOTORES DE GLICOSILAÇÃO PELO MÉTODO DE KOENIGS-KNORR

We report herein a study on the glycosylation of cyclohexanol with four D-glucosamine-based peracetylated glycosyl chlorides bearing different substituents at C-2 and three glycosylation promoters, silver carbonate, silver triflate and mercury II chloride/mercury II oxide, by the Koenigs-Knorr method. Under the conditions studied, glycosylation was successful only when 3,4,6-tri-O -acetyl-2-deoxy-2-phthalimido-α-D-glucopyranosyl chloride was used as the glycosyl donor, with silver carbonate proving the best promoter. In order to investigate the influence of the nature of the halogen at C-1, we also carried out the glycosylation of cyclohexanol with 3,4,6-tri-O -acetyl-2-deoxy-2-phthalimido-α-D-glucopyranosyl bromide, a more reactive glycosyl donor. As expected, the yield with the bromide derivative was higher with the three promoters and, again, silver carbonate was the most efficient promoter. Finally, to illustrate the well-known efficient procedure for conversion of the phtalimido group at C-2 to the corresponding acetamido group, cyclohexyl 3,4,6-tri-O -acetyl-2-deoxy-2-phtalimido-β-D-glucopyranoside was converted into cyclohexyl 2-deoxy-2-acetamido-β-D-glucopyranoside in two steps, namely, hydrazinolysis of the phtalimido group followed by chemoselective acetylation of the free amino group by treatment with acetic anhydride in methanol, at 77% overall yield.

Effect of population densities of Heterodera glycines race 3 on leaf area, photosynthesis and yield of soybean

The effect of Heterodera glycines on photosynthesis, leaf area and yield of soybean (Glycine max) was studied in two experiments carried out under greenhouse condition. Soybean seeds were sown in 1.5 l (Experiment 1) or 5.0 l (Experiment 2) clay pots filled with a mixture of field soil + sand (1:1) sterilized with methyl bromide. Eight days after sowing, seedlings were thinned to one per pot, and one day later inoculated with 0; 1.200; 3.600; 10.800; 32.400 or 97.200 J2 juveniles of H. glycines. Experiment 1 was carried out during the first 45 days of the inoculation while Experiment 2 was conducted during the whole cycle of the crop. Measurements of photosynthetic rate, stomatic conductance, chlorophyll fluorescence, leaf color, leaf area, and chlorophyll leaf content were taken at ten-day intervals throughout the experiments. Data on fresh root weight, top dry weight, grain yield, number of eggs/gram of roots, and nematode reproduction factor were obtained at the end of the trials. Each treatment was replicated ten times. There was a marked reduction in both photosynthetic rate and chlorophyll content, as well as an evident yellowing of the leaves of the infected plants. Even at the lowest Pi, the effects of H. glycines on the top dry weight or grain yield were quite severe. Despite the parasitism, soybean yield was highly correlated with the integrated leaf area and, accordingly, the use of this parameter was suggested for the design of potential damage prediction models that include physiological aspects of nematode-diseased plants.

Essential oil of mustard to control Rhizoctonia solani causing seedling damping off and seedling blight in nursery

The essential oil extracted from mustard (Brassica rapa) seeds was evaluated for its effect on suppression of Rhizoctonia solani growth in vitro, and in field soils, for reducing saprophytic substrate colonization and seedling damping off and blight using snap beans as indicator plant, the in vitro growth was completely inhibited at a concentration of 50 mul/l. The saprophytic substrate colonization in soils 24 h after treatment was drastically reduced to 45% at 150 mul/kg soil concentration, in contrast to 100% colonization at concentrations of 0, 50, or 75 mul/kg. This recovery rate gradually declined to 6% and 60%, respectively, in nine days. A control of pre and post-emergence seedling damping off and blight in common beans (Phaseolus vulgaris), without any apparent phytotoxic effect was achieved by irrigating R. solani infested soils with water containing the emulsified essential oil to provide 150 mul/l soil volume ten days prior to planting, gave over 95%. The effect of the mustard essential oil was not influenced by the physical soil texture, and it appears to be a good substitute for methyl bromide fumigation in nurseries for seedling production.

Ympäristö- ja yhdyskuntavesien monitorointi Saimaan vesistöalueella

Diplomityössä tutkittiin kromatografian, elektroforeesin ja spektrometrian käyttöä ympäristövesianalytiikassa. Kokeellisessa osassa analysoitiin Saimaan Vesi- ja Ympäristötutkimus Oy:n keräämistä kaatopaikka-, jätevesi-, pohjavesi-, vesistö-, uimahalli-, yksityiskaivo-, poreallas- ja suovesinäytteistä epäorgaaniset anionit (F-, Cl-, Br-, NO3-, NO2- SO42-ja PO42-) sekä ionikromatografilla että kapillaarielektroforeesilla. Näytteet on kerätty Saimaan alueen ympäristökunnista. Kapillaarielektroforeesilla analysoitiin lisäksi tiosulfaatti. Liekkiatomiabsorptio-spektrometrilla analysoitiin Cu, Fe, Na ja Al. Natriumia löytyi jokaisesta vesinäytteestä. Pohjavesistä ei löytynyt rautaa eikä alumiinia ja kuparipitoisuudet olivat alle määritysrajan. Vesistövesistä kahdessa näytteessä oli alle määritysrajan olevia rautapitoisuuksia. Muissa näytteissä ei rautaa ollut. Suovesistä kuparia löytyi hyvin pieniä määriä ja yhdestä näytteestä alumiinia alle määritysrajan. Kaatopaikkavesissä kuparipitoisuudet sekä kolmessa näytteessä alumiinipitoisuudet olivat alle määritysrajan. Jätevesistä oletettiin löytyvän suuria määriä typpispesieksiä ja fosforia. Niitä kuitenkin esiintyi isoissa pitoisuuksissa vain suovesinäytteissä. Jätevesinäytteet sisälsivät bromidia, nitraattia ja fluoridia jopa yli 140 mg/l. Kapillaarielektroforeesilla ja ionikromatografilla mitatut anionipitoisuudet korreloivat hyvin toisiaan. Kontaminoituja vesiä löytyi pohja-, kaatopaikka-, jäte- ja vesistövesistä sekä uima-altaan terapiaaltaan vedestä.

Electron migration in DNA matrix: an electron transfer reaction

This paper brings an active and provocative area of current research. It describes the investigation of electron transfer (ET) chemistry in general and ET reactions results in DNA in particular. Two DNA intercalating molecules were used: Ethidium Bromide as the donor (D) and Methyl-Viologen as the acceptor (A), the former intercalated between DNA bases and the latter in its surface. Using the Perrin model and fluorescence quenching measurements the distance of electron migration, herein considered to be the linear spacing between donor and acceptor molecule along the DNA molecule, was obtained. A value of 22.6 (± 1.1) angstroms for the distance and a number of 6.6 base pairs between donor and acceptor were found. In current literature the values found were 26 angstroms and almost 8 base pairs. DNA electron transfer is considered to be mediated by through-space interactions between the p-electron-containing base pairs.

Synthetic model of a new deoxybenzoin derivative from Deguelia hatschbachii A.M.G. Azevedo

In this paper we describe the synthesis of 2´,4´-dimethoxy-8-(propyl-2-one)-deoxybenzoin, a new compound employed as a model for the comparison with the respective spectral data for 6',4-dihydroxy-3'-(3,3- dimethylallyl)-2",2"-dimethylchromene(5",6":5',4')-2'-methoxy-8-(propyl-2-one) deoxybenzoin, recently isolated from Deguelia hatschbachii A.M.G. Azevedo. Both compounds have a "propyl-2-one" group attached to C-8 of the deoxybenzoin skeleton, for which there is no precedent in the literature. The Friedel-Crafts reaction of 1,3-dimethoxybenzene with phenylacetyl chloride furnished 2´,4´-dimethoxydeoxybenzoin, that after reaction with allyl bromide gave 2´,4´-dimethoxy-8-(allyl)-deoxybenzoin . Wacker oxidation gave the desired model compound in 15% overall yield. The corresponding spectral data reinforced the structure previously determined for the natural product.

Sensitive bromatometric assay methods for finasteride in pharmaceuticals

Three sensitive spectrophotometric methods are presented for the determination of finasteride in bulk and in tablets. The methods rely on the use of bromate-bromide reagent and three dyes namely, methyl orange, indigocarmine and thymol blue as reagents. They involve the addition of a measured excess of bromate-bromide reagent to finasteride in acid medium, and after the bromination reaction is judged to be complete, the unreacted bromine is determined by reacting with a fixed amount of either methylorange and measuring the absorbance at 520 nm (method A) or indigocarmine and measuring the absorbance at 610 nm (method B) or thymol blue and measuring the absorbance at 550 nm (method C). In all the methods, the amount of insitu generated bromine reacted corresponds to the amount of finasteride. The absorbance measured at the respective wavelength is found increase linearly with the concentration of finasteride. Beer's law is obeyed in the ranges 0.25- 2.0, 0.5-6.0 and 1-12 µg mL-1 for method A, method B and method C, respectively. The calculated molar absorptivity values are 5.7x10(4), 3.12x10(4) and 1.77x10(4) L mol-1 cm-1 respectively, for method A, method B and method C, and the corresponding Sandell sensitivity values are 0.0065, 0.012 and 0.021 µg cm-2. The limits of detection (LOD) and quantification (LOQ) are also reported for all the methods. Accuracy and, intra-day and inter-day precisions of the methods were established according to the current ICH guidelines. The methods were successfully applied to the determination of finasteride in commercially available tablets and the results were found to closely agree with the label claim. The results of the methods were statistically compared with those of a reference method by applying Student's t-test and F-test. The accuracy and reliability of the methods were further confirmed by performing recovery tests via standard addition procedure.

A fluorescence probe study of gemini surfactants in aqueous solution: a comparison between n-2-n and n-6-n series of the alkanediyl-a,w-bis (dimethylalkylammonium bromides)

Two series of alkanediyl-a,w-bis (dimethylalkylammonium bromide (n-2-n and n-6-n; n=8, 10,12, and 16) have been synthesized and their micelles properties studied in aqueous solution using pyrene, pyrenecarboxaldehyde (PCA) and 1,8 anilinonaphtalene sulfonic acid sodium salt (ANS) as fluorescent probes. The micelles from these surfactants have been characterized on the basis of the information provided by micelle-solubilized fluorescent probes. The obtained results indicated that the surfactant concentration at which a marked decrease in l max parameter of pyrenecarboxaldehyde (PCA) occurs corresponds to the CMC determined by conductimetric measurements. Changes in the emission spectra of ANS and PCA observed in the submicellar range for both surfactants series (n-2-n and n-6-n) were interpreted as formation of pre-aggregates. It was found that the dimeric surfactants with long spacer (s= 6) form more hydrated aggregates when compared with those formed by the n-2-n and CnTAB surfactants series. This was attributed to a more difficult packing of n-6-n surfactant molecules to form micelles.

Corrosion behaviour of boiler tube materials during combustion of fuels containing Zn and Pb

Många förbränningsanläggningar som bränner utmanande bränslen såsom restfraktioner och avfall råkar ut för problem med ökad korrosion på överhettare och/eller vattenväggar pga. komponenter i bränslena som är korrosiva. För att minimera problemen i avfallseldade pannor hålls ångparametrarna på en relativt låg nivå, vilket drastiskt minskar energiproduktionen. Beläggningarna i avfallseldade pannor består till största delen av element som är förknippade med högtemperaturkorrosion: Cl, S, alkalimetaller, främst K och Na, och tungmetaller som Pb och Zn, och det finns också indikationer av Br-förekomst. Det låga ångtrycket i avfallseldade pannor påverkar också stålrörens temperatur i pannväggarna i eldstaden. I dagens läge hålls temperaturen normalt vid 300-400 °C. Alkalikloridorsakad (KCl, NaCl) högtemperaturkorrosion har inte rapporterats vara relevant vid såpass låga temperaturer, men närvaro av Zn- och Pb-komponenter i beläggningarna har påvisats förorsaka ökad korrosion redan vid 300-400 °C. Vid förbränning kan Zn och Pb reagera med S och Cl och bilda klorider och sulfater i rökgaserna. Dessa tungmetallföreningar är speciellt problematiska pga. de bildar lågsmältande saltblandningar. Dessa lågsmältande gasformiga eller fasta föreningar följer rökgasen och kan sedan fastna eller kondensera på kallare ytor på pannväggar eller överhettare för att sedan bilda aggressiva beläggningar. Tungmetallrika (Pb, Zn) klorider och sulfater ökar risken för korrosion, och effekten förstärks ytterligare vid närvaro av smälta. Motivet med den här studien var att få en bättre insikt i högtemperaturkorrosion förorsakad av Zn och Pb, samt att undersöka och prediktera beteendet och motståndskraften hos några stålkvaliteter som används i överhettare och pannväggar i tungmetallrika förhållanden och höga materialtemperaturer. Omfattande laboratorie-, småskale- och fullskaletest utfördes. Resultaten kan direkt utnyttjas i praktiska applikationer, t.ex. vid materialval, eller vid utveckling av korrosionsmotverkande verktyg för att hitta initierande faktorer och förstå deras effekt på högtemperaturkorrosion.

Kullan uutto kloridiliuoksista

Työssä tutkittiin kullan neste-nesteuuttoa kloridiliuoksista kirjallisuustutkimuksen ja laboratoriokokeiden avulla. Uuttoreagenssina käytettiin Outotecin kehittämää kullanuuttoreagenssia. Teoreettisessa osassa tarkastellaan kullan käyttäytymistä happamissa vesiliuoksissa, jotka sisältävät kloridia ja bromidia. Lisäksi työssä käsitellään kultakloridiyhdisteiden käyttöturvallisuutta. Teollisuudessa vuonna 2012 käytettäviä neste-nesteuuttoon perustuvia kullan talteenottomenetelmiä esitellään lyhyesti. Kirjallisuusosassa käsitellään myös joidenkin teollisesti käytettävien polymeeristen rakennemateriaalien ominaisuuksia. Kokeellisessa osassa määritettiin kullanuuttoreagenssin fysikaalisia ominaisuuksia, kuten sen tiheys, viskositeetti, liukoisuus veteen sekä faasien selkeytyminen uuttoprosessissa. Tuloksista havaittiin, että eri modifiointiaineet vaikuttavat huomattavasti kullanuuttoliuoksen fysikaalisiin ominaisuuksiin. Kullan uuttoa tutkittiin pienen mittakaavan laboratoriokokein käyttämällä synteettisiä kultaa sisältäviä lähtöliuoksia. Kokeissa tutkittiin lähtöliuoksen happopitoisuuden ja bromidipitoisuuden, sekä uuttoreagenssin modifiointiaineiden vaikutuksia kullan uuttotasapainoon. Lisäksi tutkittiin joidenkin epäpuhtausmetallien myötäuuttautumista. Materiaalitutkimuksissa tarkasteltiin kullanuuttoreagenssin ja autenttisen kullan halidiliuoksen vaikutuksia polymeerimateriaaleihin pitkäaikaisessa kontaktissa. Uuttoliuosten havaittiin aiheuttavan turpoamaa sekä pinnan pehmenemistä joissakin teollisissa muoveissa.

First identification of natural infection of Rickettsia rickettsii in the Rhipicephalus sanguineus tick, in the State of Rio de Janeiro

The Brazilian Spotted Fever (BSF) is a zoonotic disease caused by Rickettsia rickettsii and transmitted by ticks of the genus Amblyomma, more frequently, Amblyomma cajennense. The aim of this paper was to report the first molecular detection of R. rickettsii on R. sanguineus naturally infected in Rio de Janeiro, Brazil. Ticks were collected from dogs in a rural region of Resende municipality, Rio de Janeiro State, Brazil (22º30'9.46"S, 44º42'44.29"WO), where occurred five human cases of BSF in 2006. The ticks were identified under a stereoscopic microscope and separated in pools by stages, species and sex. DNA extraction was carried out using QIAamp DNA Mini Kit (QIAGEN®). The DNA was submitted to PCR amplification using 04 set of primers: Rr190.70p/Rr190.602n (OmpA, 532bp), BG1-21/BG2-20 (OmpB, 650bp), Tz15/Tz16 (17 kDa protein-encoding gene, 246bp) and RpCS.877p/RpCS.1258n (gltA, 381bp). PCR products were separated by electrophoresis on 1% agarose gels and visualized under ultraviolet light with ethidium bromide. PCR products of the expected sizes were purified by QIAquick® and sequenced by ABI PRISM®. The generated nucleotide sequences were edited with using Bioedit® software and compared with the corresponding homologous sequences available through GenBank, using Discontiguous Mega Blast (http://www.ncbi.nlm.nih.gov). It was confirmed R. rickettsii by sequencing of the material (GenBank FJ356230). The molecular characterization of R. rickettsii in the tick R. sanguineus emphasizes the role of dogs as carriers of ticks from the environment to home. Moreover, this result suggests that there is a considerable chance for active participation of R. sanguineus as one of tick species in the transmission of R. ricketsii to human being in the Brazilian territory.

Atividade de três drogas antivirais sobre os herpesvírus bovino tipos 1, 2 e 5 em cultivo celular

A atividade de três fármacos antivirais (Aciclovir [ACV], Ganciclovir [GCV] e Foscarnet [PFA]) foi testada in vitro frente aos herpesvírus bovino tipos 1 (BoHV-1), 2 (BoHV-2) e 5 (BoHV-5). Para isso, utilizou-se o teste de reducao de placas virais em cultivo celular, testando-se diferentes concentracoes dos farmacos frente a 100 doses infectantes para 50% dos cultivos celulares (DICC50) dos respectivos virus. Pelo teste de MTT (3-(4,5-Dimethylthiazol- 2-yl)-2,5-diphenyltetrazolium bromide), verificou-se que concentracoes inferiores a 200ƒÊg/mL dos tres antivirais resultaram em indices de viabilidade de celulas MDBK e Hep2 superiores a 80%. Com base na concentracao citotoxica para 50% das celulas (CC50) e na concentracao dos farmacos efetiva para inibir em 50% o numero de placas virais (EC50), calculou-se o indice de seletividade (IS) dos antivirais para os tres herpesvirus. Assim, o ACV demonstrou ser moderadamente ativo frente ao BoHV-1 (EC50: 112,9ƒÊg/mL e IS: 4,5), ao BoHV-2 (EC50: 114,2 ƒÊg/mL e IS: 4,5) e BoHV-5 (EC50: 96,9ƒÊg/mL e IS: 5,3). O GCV apresentou atividade moderada frente ao BoHV-2 (EC50: 33,5ƒÊg/mL e IS: 16,6) e, em menor grau, contra o BoHV-5 (EC50: 123,2ƒÊg/mL e IS: 4,5), sendo ineficaz frente ao BoHV-1 (EC50: 335,8ƒÊg/mL e IS: 1,7). O PFA apresentou atividade antiviral mais pronunciada, sendo o unico farmaco que, na concentracao de 100ƒÊg/mL, inibiu completamente a producao de placas pelos tres virus testados. O PFA foi o mais efetivo in vitro frente ao BoHV-1 (EC50: 29,5ƒÊg/mL e IS: 42,2), ao BoHV-2 (EC50: 45,2ƒÊg/mL e IS: 27,6) e ao BoHV-5 (EC50: 7,8ƒÊg/mL e IS: 160,6). Portanto, os resultados obtidos indicam que o PFA pode se constituir em um candidato para terapia experimental de infeccoes pelos herpesvirus de bovinos in vivo.

Polymerase chain reaction for the diagnosis of bovine genital campylobacteriosis

Bovine genital campylobacteriosis is a common venereal disease of cattle; the prevalence of this disease can be underestimated mostly because of the nature of the etiological agent, the microaerobic Campylobacter fetus subspecies venerealis. The purpose of the current study was to evaluate the utilization of polymerase chain reaction (PCR) in the diagnosis of genital campylobacteriosis in samples obtained from bull prepuce aspirate, cow cervical mucus, and abomasum contents of aborted fetuses, collected into enrichment medium. Five different DNA extraction protocols were tested: thermal extraction, lysis with proteinase K, lysis with guanidine isothiocyanate, lysis with DNAzol, and lysis with hexadecyltrimethylammonium bromide (CTAB). The specificity, sensitivity, and technical application of the PCR assay were also evaluated with clinical samples and compared to bacterial isolation by standard culture. DNA extraction by the CTAB protocol provided better results in PCR, and it was able to detect 63 colony-forming units per ml of C. fetus. Out of 277 clinical samples tested, 68 (24%) were positive for Campylobacter fetus using PCR, while only 8 (2.8%) of the samples were positive by bacterial isolation in solid medium, proving the superiority of the PCR technique when compared to the standard isolation method, and providing evidence for its usefulness as a better screening test in cattle for the diagnosis of bovine genital campylobacteriosis.

Electrochemical Treatment of Wastewaters

Electrocoagulation is a process in which wastewater is treated under electrical current. Coagulant is formed during the process through the metal anode dissolution to respective ions which react with hydroxyl ions released in cathode. These metal hydroxides form complexes with pollutant ions. Pollutants are removed among metal hydroxide precipitates. This study was concentrated on describing chemistry and device structures in which electrochemical treatment operations are based on. Studied pollutants were nitrogen compounds, sulphate, trivalent and pentavalent arsenic, heavy metals, phosphate, fluoride, chloride, and bromide. In experimental part, removal of ammonium, nitrate, and sulphate during electrochemical treatment was studied separately. Main objective of this study was to find suitable metal plate material for ammonium, nitrate, and sulphate removal, respectively. Also other parameters such as pH of solution, concentration of pollutant and sodium chloride, and current density were optimized. According to this study the most suitable material for ammonium and sulphate removal by electrochemical treatment was stainless steel. Respectively, iron was the optimum material for nitrate removal. Rise in the pH of solution at the final stage of electrochemical treatment of ammonium, nitrate, and sulphate was detected. Conductivities of solutions decreased during ammonium removal in electrochemical processes. When nitrate and sulphate were removed electrochemically conductivities of solutions increased. Concentrations of residual metals in electrochemically treated solutions were not significant. Based on this study electrochemical treatment processes are recommended to be used in treatment of industrial wastewaters. Treatment conditions should be optimized for each wastewater matrix.

Antimicrobial resistance of Staphylococcus spp. from small ruminant mastitis in Brazil

The study aimed to determine the antimicrobial resistance patterns and to identify molecular resistance markers in Staphylococcus spp. (n=210) isolated from small ruminant mastitis in Brazil. The antimicrobial resistance patterns were evaluated by the disk diffusion test and by detection of the presence of mecA, blaZ, ermA, ermB, ermC and msrA genes by PCR. The efflux pump test was performed using ethidium bromide and biofilm production was determined by Congo red agar test along with PCR for detection of the icaD gene. The isolates were most resistant to amoxicillin (50.0%), streptomycin (42.8%), tetracycline (40.4%), lincomycin (39.0%) and erythromycin (33.8%). Pan-susceptibility to all tested drugs was observed in 71 (33.8%) isolates and 41 Staphylococcus isolates were positive for the efflux pump. Although phenotypic resistance to oxacillin was observed in 12.8% of the isolates, none harbored the mecA gene. However, 45.7% of the isolates harbored blaZ indicating that beta-lactamase production was the main mechanism associated with staphylococci resistance to beta-lactams in the present study. The other determinants of resistance to antimicrobial agents ermA, ermB, ermC, and msrA were observed in 1.4%, 10.4%, 16.2%, and 0.9% of the isolates, respectively. In addition, the icaD gen was detected in 32.9% of the isolates. Seventy three isolates (54 from goats and 19 from sheep) were negative for all resistance genes tested and 69 isolates presented two or more resistance genes. Association among blaZ, ermA, ermB, ermC and efflux pump were observed in 17 isolates, 14 of which originated from goats and three from sheep. The data obtained in this study show the resistance of the isolates to beta-lactamics, which may be associated with the use of antimicrobial drugs without veterinary control.