Assessing e-procurement System for Improving the Purchasing Operations

Diplomityön tavoitteena oli luoda suunnitelma elektronisen hankintatoimen aloittamiseksi, analysoimalla nykyisiä ostoprosesseja ja konsernin laajuista elektronista hankintajärjestelmää. Työ pohjautuu yritysten väliseen elektroniseen kauppaan, elektroniseen hankintatoimeen ja systeemisuunnitteluun liittyvään kirjallisuuteen. Työssä tehdyn suunnitelman tarkoituksena on auttaa Siemens Oy:tä siirtymään uuteen elektroniseen ostotoimintaan. Elektroniselle ostotoiminnalle suunniteltiin tavoitteet ja näitä vastaavat vaatimukset. Elektronisen hankintajärjestelmän analysointi perustuu kirjallisuudessa esitettyihin järjestelmän elinkaari-mallin vaiheisiin. Analysoinnin tarkoituksena oli saada selville järjestelmän soveltuvuus Siemens Oy: n liiketoimintaympäristöön, prosesseihin ja vaatimuksiin. Elektronisen hankintatoiminnan etuja ovat liiketoiminta prosessien johtamisen parantuminen, kustannusten väheneminen sekä taloudellisen suorituskyvyn lisääntyminen. Elektronisen hankintatoiminnan aloittaminen vaatii kuitenkin huolellista suunnittelua. Työssä tehdyt suunnitelmat ja analysoinnit auttavat arvioidessa järjestelmän sopivuutta Siemens Oy: n vaatimuksiin. Oikean ja toimivan järjestelmän valinta ei kuitenkaan takaa elektronisesta hankintatoiminnasta hyötymistä. Tärkeimpiä jatkotoimenpiteitä onkin suorittaa kustannus/hyöty analyysi ja arvioida toimittajien halukkuutta ja kykyjä osallistua markkinapaikkaan.

Design Patterns in EPOC Software Development

Työssä tutkittiin oliosuunnittelumalleja EPOC-käyttöjärjestelmässä. Työssä tutkittiin sekä yleisiä suunnittelumalleja että EPOC-ympäristössä esiintyviä oliorakenteita, niiden aiheuttamia vaatimuksia sovelluksille sekä niiden käyttämisestä saatavia hyötyjä. Työssä toteutettiin EPOC-ohjelmiston suunnittelu hyödyntäen suunnittelumalleja ja periaatteita. Oliosuunnittelumallit ovat yleistyneet huomattavasti viime vuosina. Suunnittelumallien lähtökohtana ovat sekä yleiset että ympäristökohtaiset suunnitteluperiaatteet ja säännöt. Suunnittelumallit ovat osa isompaa rakennekokonaisuutta, joka käsittää sekä prosessi-, analyysi-, arkkitehtuuri- ym. malleja. Oliosuunnittelumallit nopeuttavat ja helpottavat suunnittelua sekä parantavat uudelleenkäytettävyyttä korkeammalla abstraktiotasolla. EPOC on tulevaisuuden mobiililaitteiden yleisimpiä käyttöjärjestelmiä. EPOC on kokonaisuudessaan oliopohjainen ja sisältää lukuisia oliorakenteita, joiden ymmärtäminen on sovelluskehityksen kannalta elintärkeää. Koska ympäristöt, joissa EPOC-käyttöjärjestelmää käytetään, ovat yleensä resurssien puolesta rajoittuneita, on yleisten suunnittelumallien käytössä oltava tarkkana. EPOC vaatii yleisiin suunnittelumalleihin muutoksia ja estää joidenkin käytön kokonaan.

Software methods for HTML files protection in local / corporate networks: review and implementation

Tässä luomistyössä on esitetty tutkimus informaation suojaamisen menetelmien osalta paikallisissa ja ryhmäkuntaisissa verkoissa. Tutkimukseen kuuluu nykyaikaisten kryptagraafisten järjestelmien, Internetin/Intranetin ohjelmointikeinojen ja pääsyoikeuksien jakelumenetelmien analyysi. Tutkimusten perusteella on laadittu ohjelmiston prototyyppi HTML-tiedostojen suojaamista varten. Ohjelmiston laatimisprosessi on sisältänyt vaatimusten, järjestelmän ja suojelukomponenttien suunnittelun ja protytyypin testauksen. Ohjelmiston realisoinnin jälkeen kirjoitettiin käyttöohjeet. Ohjelmiston prototyyppi suojaa informaatiota HTML-tiedoston koko käytön aikana ja eri yrityksissä voidaan käyttää sitä pienien laajennuksien jälkeen.

Web Software Engineering - value added approach

Taking the maximum advantage of technological innovations and the investment in them is of key importance for businesses. The IT industry offers a wide range of innovative high-technology solutions to manage information processing and distribution. However for end-user businesses to make informed decisions in this area is challenging. The aim of this research is to identify the key differences in principal solutions, and what the selection criteria should be for those involved. Existing methodologies for software development are classified, and some key criteria are described to help IT system developers and users determine what are the most important factors in system selection, development and deployment. Statistical data is researched and analysed, a theoretical basis is developed and reviewed, key issues from case studies are identified and generalized to be presented along with the conclusions in the current study. The results give a good basis for corporate consideration and provide overall support to the key decisions in developing web-based software. The conclusion is that new web developments should be considered the stakeholders as an evolution of existing business systems, but they should then pay particular attention to the new advantages that web-based software offers in terms of standardised interfaces and procedures, universal deployment opportunities, and a range of other benefits the study highlights.

Delivery system for location based information in wireless IP networks

Tämä työ esittelee uuden tarjota paikasta riippuvaa tietoa langattomien tietoverkkojen käyttäjille. Tieto välitetään jokaiselle käyttäjälle tietämättä mitään käyttäjän henkilöllisyydestä. Sovellustason protokollaksi valittiin HTTP, joka mahdollistaa tämän järjestelmän saattaa tietoa perille useimmille käyttäjille, jotka käyttävät hyvinkin erilaisia päätelaitteita. Tämä järjestelmä toimii sieppaavan www-liikenteen välityspalvelimen jatkeena. Erilaisten tietokantojen sisällä on perusteella järjestelmä päättää välitetäänkö tietoa vai ei. Järjestelmä sisältää myös yksinkertaisen ohjelmiston käyttäjien paikantamiseksi yksittäisen tukiaseman tarkkuudella. Vaikka esitetty ratkaisu tähtääkin paikkaan perustuvien mainosten tarjoamiseen, se on helposti muunnettavissa minkä tahansa tyyppisen tiedon välittämiseen käyttäjille.

Java Mobile Media API porting in Symbian Operating System

Työssä tutkitaan, kuinka Symbian käyttöjärjestelmälle voidaan tehdä siirrettäviä ohjelmia. Työssä käydään läpi menetelmiä, jotka helpottavat ohjelmistojen siirrettävyyttä uudelle alustalle. Uuteen älypuhelimeen voi tulla monia uusia komponentteja. Laite voi muuttua piiritasolla, käyttöjärjestelmästä voi tulla uusi versio sekä siirrettävästä ohjelmasta voi tulla uusi versio. Kaikki nämä vaikuttavat ohjelman siirrettävyyteen. Työssä tehtiin Java-rajapinnan siirto uudelle alustalle. Prosessin aikana löydettiin tärkeitä tekijöitä, jotka vaikuttavat ohjelmiston siirrettävyyteen. Siirrettävyys sinänsä pitäisi ottaa huomioon ohjelmistoprosessin jokaisessa vaiheessa. Älypuhelimista tulee jatkuvasti uusia versioita. Tämä tekee ohjelmien siirrettävyydestä hyvin tärkeän tekijän ohjelmistojen suunnittelussa. Hyvin suunniteltu ohjelma on helpompi ylläpitää, päivättää ja siirtää myöhemmin.

Developing a user-centric event management system

This thesis describes the development of a software requirements specification for a user-centric event management system. The system is set to satisfy three goals: adding value for the event attendees, adding value for the event organizer, and reducing the costs of arranging and running an event. The requirements are identified by researching the prescriptive traits of event business and the current state of the case company and its environment. First the professional and human needs for events are scrutinized. Second, some recent reports about the current trends in the event business are reviewed. Then the event life cycle is presented using the model of new service development, and online promotion of events and especially word-of-mouth marketing receive special attention. Events are also regarded from the perspective of social networks and social media. The case company’s current state and its competitors are reviewed to formulate the needs which the system should fulfil. Then the currently available solutions for social media oriented event management are reviewed. The result is a set of functional and non-functional requirements. The functional requirements are categorized into social media, social networking, event personalization, event management, and system administration features. The specified features and non-functional requirements satisfy the three goals set for the system.

Problems of the architecture design in the system integration

This thesis studies the problems and their reasons a software architect faces in his work. The purpose of the study is to search and identify potential factors causing problens in system integration and software engineering. Under a special interest are non-technical factors causing different kinds of problems. Thesis was executed by interviewing professionals that took part in e-commerce project in some corporation. Interviewed professionals consisted of architects from technical implementation projects, corporation's architect team leader, different kind of project managers and CRM manager. A specific theme list was used as an guidance of the interviews. Recorded interviews were transcribed and then classified using ATLAS.ti software. Basics of e-commerce, software engineering and system integration is described too. Differences between e-commerce and e-business as well as traditional business are represented as are basic types of e-commerce. Software's life span, general problems of software engineering and software design are covered concerning software engineering. In addition, general problems of the system integration and the special requirements set by e-commerce are described in the thesis. In the ending there is a part where the problems founded in study are described and some areas of software engineering where some development could be done so that same kind of problems could be avoided in the future.

False normal Lung Clearance Index in infants with cystic fibrosis due to software algorithms.

BACKGROUND: Lung clearance index (LCI), a marker of ventilation inhomogeneity, is elevated early in children with cystic fibrosis (CF). However, in infants with CF, LCI values are found to be normal, although structural lung abnormalities are often detectable. We hypothesized that this discrepancy is due to inadequate algorithms of the available software package. AIM: Our aim was to challenge the validity of these software algorithms. METHODS: We compared multiple breath washout (MBW) results of current software algorithms (automatic modus) to refined algorithms (manual modus) in 17 asymptomatic infants with CF, and 24 matched healthy term-born infants. The main difference between these two analysis methods lies in the calculation of the molar mass differences that the system uses to define the completion of the measurement. RESULTS: In infants with CF the refined manual modus revealed clearly elevated LCI above 9 in 8 out of 35 measurements (23%), all showing LCI values below 8.3 using the automatic modus (paired t-test comparing the means, P < 0.001). Healthy infants showed normal LCI values using both analysis methods (n = 47, paired t-test, P = 0.79). The most relevant reason for false normal LCI values in infants with CF using the automatic modus was the incorrect recognition of the end-of-test too early during the washout. CONCLUSION: We recommend the use of the manual modus for the analysis of MBW outcomes in infants in order to obtain more accurate results. This will allow appropriate use of infant lung function results for clinical and scientific purposes. Pediatr Pulmonol. 2015; 50:970-977. © 2015 Wiley Periodicals, Inc.

A System-Level Simulation Model for a Protocol Processor

As the development of integrated circuit technology continues to follow Moore’s law the complexity of circuits increases exponentially. Traditional hardware description languages such as VHDL and Verilog are no longer powerful enough to cope with this level of complexity and do not provide facilities for hardware/software codesign. Languages such as SystemC are intended to solve these problems by combining the powerful expression of high level programming languages and hardware oriented facilities of hardware description languages. To fully replace older languages in the desing flow of digital systems SystemC should also be synthesizable. The devices required by modern high speed networks often share the same tight constraints for e.g. size, power consumption and price with embedded systems but have also very demanding real time and quality of service requirements that are difficult to satisfy with general purpose processors. Dedicated hardware blocks of an application specific instruction set processor are one way to combine fast processing speed, energy efficiency, flexibility and relatively low time-to-market. Common features can be identified in the network processing domain making it possible to develop specialized but configurable processor architectures. One such architecture is the TACO which is based on transport triggered architecture. The architecture offers a high degree of parallelism and modularity and greatly simplified instruction decoding. For this M.Sc.(Tech) thesis, a simulation environment for the TACO architecture was developed with SystemC 2.2 using an old version written with SystemC 1.0 as a starting point. The environment enables rapid design space exploration by providing facilities for hw/sw codesign and simulation and an extendable library of automatically configured reusable hardware blocks. Other topics that are covered are the differences between SystemC 1.0 and 2.2 from the viewpoint of hardware modeling, and compilation of a SystemC model into synthesizable VHDL with Celoxica Agility SystemC Compiler. A simulation model for a processor for TCP/IP packet validation was designed and tested as a test case for the environment.

Choosing a platform for a billing system

Enterprises have a need in use of billing. Before actual choose of a billing system an appropriate platform has to be deployed. This work presents a study of a platform choosing for a billing system and shows the role of optimally chosen platform. In evaluation of a platform several criteria were considered: cost, scalability, reliability, safety, usability, portability and efficiency. In the thesis three different platforms MAC OS, Linux and MS Windows were studied. The results of the evaluation of each platform are shown and according to this results the most suitable platform for a billing system was chosen.

Validation of a computer-assisted system on classifying lower third molars

Objectives: The present study evaluates the reliability of the Radio Memory® software (Radio Memory; Belo Horizonte,Brasil.) on classifying lower third molars, analyzing intra- and interexaminer agreement of the results. Study Design: An observational, descriptive study of 280 lower third molars was made. The corresponding orthopantomographs were analyzed by two examiners using the Radio Memory® software. The exam was repeated 30 days after the first observation by each examiner. Both intra- and interexaminer agreement were determined using the SPSS v 12.0 software package for Windows (SPSS; Chicago, USA). Results: Intra- and interexaminer agreement was shown for both the Pell & Gregory and the Winter classifications, p<0.01, with 99% significant correlation between variables in all the cases. Conclusions: The use of Radio Memory® software for the classification of lower third molars is shown to be a valid alternative to the conventional method (direct evaluation on the orthopantomograph), for both clinical and investigational applications.

Multidetector computed tomography angiography of the celiac trunk and hepatic arterial system: normal anatomy and main variants

Abstract Although digital angiography remains as the gold standard for imaging the celiac arterial trunk and hepatic arteries, multidetector computed tomography in association with digital images processing by software resources represents a useful tool particularly attractive for its non invasiveness. Knowledge of normal anatomy as well as of its variations is helpful in images interpretation and to address surgical planning on a case-by-case basis. The present essay illustrates several types of anatomical variations of celiac trunk, hepatic artery and its main branches, by means of digitally reconstructed computed tomography images, correlating their prevalence in the population with surgical implications.

Laboratory automation in clinical bacteriology: what system to choose?

Automation was introduced many years ago in several diagnostic disciplines such as chemistry, haematology and molecular biology. The first laboratory automation system for clinical bacteriology was released in 2006, and it rapidly proved its value by increasing productivity, allowing a continuous increase in sample volumes despite limited budgets and personnel shortages. Today, two major manufacturers, BD Kiestra and Copan, are commercializing partial or complete laboratory automation systems for bacteriology. The laboratory automation systems are rapidly evolving to provide improved hardware and software solutions to optimize laboratory efficiency. However, the complex parameters of the laboratory and automation systems must be considered to determine the best system for each given laboratory. We address several topics on laboratory automation that may help clinical bacteriologists to understand the particularities and operative modalities of the different systems. We present (a) a comparison of the engineering and technical features of the various elements composing the two different automated systems currently available, (b) the system workflows of partial and complete laboratory automation, which define the basis for laboratory reorganization required to optimize system efficiency, (c) the concept of digital imaging and telebacteriology, (d) the connectivity of laboratory automation to the laboratory information system, (e) the general advantages and disadvantages as well as the expected impacts provided by laboratory automation and (f) the laboratory data required to conduct a workflow assessment to determine the best configuration of an automated system for the laboratory activities and specificities.

Interfase y software de control para operar en sincronismo un automuestreador y un atomizador electrotérmico por filamento de tungsteno en espectrofotometría de absorción atómica

The interface and software for synchronous control of an autosampler and an electrothermal tungsten coil atomizer in atomic absorption spectrophotometry were developed. The control of the power supply, the trigger of the Read function of the spectrophotometer and the automatic operation of the autosampler was performed by software written in "TurboBasic". The system was evaluated by comparison of the repeatability of peak-height absorbances obtained in the atomization of lead by consecutive 10-µl injections of solutions (prepared in 0.2% v/v HNO3) using autosampler and manual sample introduction, and also by long term operation.