Theoretical representation of shear and pressure influence on the phase separation behavior of PVME/PS mixture

In the framework of lattice fluid model, the Gibbs energy and equation of state are derived by introducing the energy (E-s) stored during flow for polymer blends under shear. From the calculation of the spinodal of poly(vinyl methyl ether) (PVME) and polystyrene (PS) mixtures, we have found the influence of E., an equation of state in pure component is inappreciable, but it is appreciable in the mixture. However, the effect of E, on phase separation behavior is extremely striking. In the calculation of spinodal for the PVME/PS system, a thin, long and banana miscibility gap generated by shear is seen beside the miscibility gap with lower critical solution temperature. Meanwhile, a binodal coalescence of upper and lower miscibility gaps is occurred. The three points of the three-phase equilibrium are forecasted. The shear rate dependence of cloud point temperature at a certain composition is discussed. The calculated results are acceptable compared with the experiment values obtained by Higgins et at. However, the maximum positive shift and the minimum negative shift of cloud point temperature guessed by Higgins are not obtained, Furthermore, the combining effects of pressure and shear on spinodal shift are predicted.

Effect of cross-linking of high-density polyethylene. I. On spherulitic structures

Crystallization behavior and spherulitic structure of linear high-density polyethylene (HDPE), after being irradiated in its molten state by gamma -rays, was investigated by small-angle laser scattering (SALS) and differential scanning calorimetry (DSC). Significant changes in the crystallization of HDPE during cooling in air before and after being irradiated in the melt were observed. A critical minimum average molar mass between cross-links (200 carbon-carbon bonds) for spherulite formation in such an irradiated HDPE network was obtained.

Effects of pressure and molecular weight on the miscibility of polystyrene and cyclohexane

With the aid of Sanchez-Lacombe lattice fluid theory (SLLFT), the phase diagrams were calculated for the system cyclohexane (CH)/polystyrene (PS) with different molecular weights at different pressures. The experimental data is in reasonable agreement with SLLFT calculations. The total Gibbs interaction energy, g*(12) for different molecular weights PS at different pressures was expressed, by means of a universal relationship, as g(12)* =f(12)* + (P - P-0) nu*(12) demixing curves were then calculated at fixed (near critical) compositions of CH and PS systems for different molecular weights. The pressures of optimum miscibility obtained from the Gibbs interaction energy are close to those measured by Wolf and coworkers. Furthermore, a reasonable explanation was given for the earlier observation of Saeki et al., i.e., the phase separation temperatures of the present system increase with the increase of pressure for the low molecular weight of the polymer whereas they decrease for the higher molecular weight polymers. The effects of molecular weight, pressure, temperature and composition on the Flory Huggins interaction parameter can be described by a general equation resulting from fitting the interaction parameters by means of Sanchez-Lacombe lattice fluid theory.

Phase behavior in mixtures of a homopolymer and a block copolymer .4. SALS and SAXS studies

Phase behavior of blends of poly(vinyl methyl ether) (PVME) with four styrene-butadienestyrene (SBS) triblock copolymers, being of various molecular weights, architecture, and compositions, was investigated by small-angle light scattering. Small-angle X-ray scattering investigation was accomplished for one blend. Low critical solution temperature (LCST) and a unique phase behavior, resembling upper critical solution temperature (UCST), were observed. It was found that the architecture of the copolymer greatly influenced the phase behavior of the blends. Random phase approximation theory was used to calculate the spinodal phase transition curves of the ABA/C and BAB/C systems; LCST and resembling UCST phase behavior were observed as the parameters of the system changed. Qualitatively, the experimental and the theoretical results are consistent with each other. (C) 1996 John Wiley & Sons, Inc.

THE RING-BANDED SPHERULITE STRUCTURE OF POLY(EPSILON-CAPROLACTONE) IN ITS MISCIBLE MIXTURES WITH POLY(STYRENE-CO-ACRYLONITRILE)

The structure of the PCL spherulite in poly(epsilon-caprolactone)/poly(styrene-co-acrylonitrile) (PCL/SAN) blends was investigated by optical microscopy and small angle light scattering. The spherulite structure with a Maltese cross has been observed in pure PCL. Similar PCL/SAN blends exhibited not only spherulites with a Maltese cross, but also distinct extinction rings. The H(v) light scattering pattern especially caused diffraction rings in PCL/SAN blends but not in pure PCL. The spherical symmetry of spherulite PCL becomes more incomplete and the twist of the lamella becomes more irregular with increasing SAN content. It is found that the spherulite structure of PCL/SAN blends is dependent on the crystallization temperature and the concentration of SAN in PCL/SAN blends.

Self-organisation in the assembly of gels from mixtures of different dendritic peptide building blocks

This paper investigates dendritic peptides capable of assembling into nanostructured gels, and explores the effect on self-assembly of mixing different molecular building blocks. Thermal measurements, small angle Xray scattering (SAXS) and circular dichroism (CD) spectroscopy are used to probe these materials on macroscopic, nanoscopic and molecular length scales. The results from these investigations demonstrate that in this case, systems with different "size" and "chirality" factors can self-organise, whilst systems with different "shape" factors cannot. The "size" and "chirality" factors are directly connected with the molecular information programmed into the dendritic peptides, whilst the shape factor depends on the group linking these peptides together-this is consistent with molecular recognition hydrogen bond pathways between the peptidic building blocks controlling the ability of these systems to self-recognise. These results demonstrate that mixtures of relatively complex peptides, with only subtle differences on the molecular scale, can self-organise into nanoscale structures, an important step in the spontaneous assembly of ordered systems from complex mixtures.

Experimentally driven atomistic model of 1,2 Polybutadiene

We present an efficient method of combining wide angle neutron scattering data with detailed atomistic models, allowing us to perform a quantitative and qualitative mapping of the organisation of the chain conformation in both glass and liquid phases. The structural refinement method presented in this work is based on the exploitation of the intrachain features of the diffraction pattern and its intimate linkage with atomistic models by the use of internal coordinates for bond lengths, valence angles and torsion rotations. Atomic connectivity is defined through these coordinates that are in turn assigned by pre-defined probability distributions, thus allowing for the models in question to be built stochastically. Incremental variation of these coordinates allows for the construction of models that minimise the differences between the observed and calculated structure factors. We present a series of neutron scattering data of 1,2 polybutadiene at the region 120-400K. Analysis of the experimental data yield bond lengths for C-C and C=C of 1.54Å and 1.35Å respectively. Valence angles of the backbone were found to be at 112° and the torsion distributions are characterised by five rotational states, a three-fold trans-skew± for the backbone and gauche± for the vinyl group. Rotational states of the vinyl group were found to be equally populated, indicating a largely atactic chan. The two backbone torsion angles exhibit different behaviour with respect to temperature of their trans population, with one of them adopting an almost all trans sequence. Consequently the resulting configuration leads to a rather persistent chain, something indicated by the value of the characteristic ratio extrapolated from the model. We compare our results with theoretical predictions, computer simulations, RIS models and previously reported experimental results.

Obtenção e caracterização de nanopartículas de quitosana

Chitosan nanoparticles have been used in several systems for the controlled release of drugs. The aim of this study was to obtain and characterize chitosan nanoparticles prepared by the method of coacervation / precipitation using sodium sulfate at different concentrations as the crosslinking agent. The characterization was done using zeta potential and small angle Xray scattering, SAXS. The dispersions of chitosan were obtained at pH 1 and pH = 3. The results of zeta potential at pH = 1 ranged from +64.8 to +29.27 mV and for pH = 3 they varied from +72.4 to +23.48 mV, indicating that the chain of chitosan is positively charged in acidic pH and the behavior of nanoparticles in terms of surface charge was independent of pH. However, the results indicated a dependence of particle size in relation to pH. This difference in behavior was explained by the influence of enthalpic and entropic components

Obtenção de polímeros graftizados de quitosana e estudo das propriedades físico-químicas para aplicação na indústria do petróleo

Chitosan is a biopolymer derived from the shells of crustaceans, biodegradable, inexpensive and renewable with important physical and chemical properties. Moreover, the different modifications possible in its chemical structure generate new properties, making it an attractive polysaccharide owing to its range of potential applications. Polymers have been used in oil production operations. However, growing concern over environmental constraints has prompted oil industry to search for environmentally sustainable materials. As such, this study sought to obtain chitosan derivatives grafted with hydrophilic (poly(ethylene glycol), mPEG) and/or hydrophobic groups (n-dodecyl) via a simple (one-pot) method and evaluate their physicochemical properties as a function of varying pH using rheology, small-angle Xray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. The chitosan derivatives were prepared using reductive alkylation under mild reaction conditions and the chemical structure of the polymers was characterized by nuclear magnetic resonance (1H NMR) and CHN elemental analysis. Considering a constant mPEG/Chitosan molar ratio on modification of chitosan, the solubility of the polymer across a wide pH range (acidic, neutral and basic) could only be improved when some of the amino groups were submitted to reacetylation using the one-pot method. Under these conditions, solubility is maintained even with the simultaneous insertion of n-dodecyl. On the other hand, the solubility of derivatives obtained only through mPEG incorporation using the traditional methodology, or with the ndodecyl group, was similar to that of its precursor. The hydrophilic group promoted decreased viscosity of the polymer solutions at 10 g/L in acid medium. However, at basic pH, both viscosity and thermal stability increased, as well as exhibited a pronounced pseudoplastic behavior, suggesting strong intermolecular associations in the alkaline medium. The SAXS results showed a polyelectrolyte behavior with the decrease in pH for the polymer systems. DLS analyses revealed that although the dilute polymer solutions at 1 g/L and pH 3 exhibited a high density of protonated amino groups along the polymer chain, the high degree of charge contributed significantly to aggregation, promoting increased particle size with the decrease in pH. Furthermore, the hydrophobic group also contributed to increasing the size of aggregates in solution at pH 3, whereas the hydrophilic group helped reduce their size across the entire pH range. Nevertheless, the nature of aggregation was dependent on the pH of the medium. Zeta potential results indicated that its values do not depend solely on the surface charge of the particle, but are also dependent on the net charge of the medium. In this study, water soluble associative polymers exhibit properties that can be of great interest in the petroleum industry

Estudos estruturais de uma lectina presente em sementes de Lotus tetragonolobus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise estrutural de aerogéis via espalhamento de luz a baixo ângulo

The sol-gel process is a method for obtaining vitreous or vitro-ceramic materials which, are prepared a sol and by drying the liquid phase. This technique has been used extensively for the preparation of glassy gels, films, fibers and particles from the hydrolysis and polycondensation reactions of metal alkoxides. The usual methods for drying are: evaporation drying (xerogels), freeze drying (criogéis) and via supercritical CO2 extraction (aerogels). In the present work, we studied the preparation of silica gels by the sol-gel process from the hydrolysis of alkoxides tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). The hydrolysis was promoted from GPTS and TEOS in proportion (4: 1) under acidic conditions. The hydrolysis reaction was promoted inside a Becker at room temperature. After hydrolyses the prepared sol had pH 2, and kept under mechanical agitation for a period of 1 hour. In order to accelerate the polycondensation reaction, the pH was corrected to a value near 5 by slowly adding NH4OH. Then the sols were leaked in sealed polycarbonate containers and maintained for 20 days at 40°C for gelation. Silica aerogels were prepared via supercritical CO2 extraction of the wet gel at temperature and pressure higher than 31°C and 74 atm, in an autoclave specially developed for the process. The structural characteristics were studied in the dry gel (aerogel). Aerogels were then characterized by nitrogen adsorption and small angle light scattering. The nitrogen adsorption data were analyzed for the determination of the BET specific surface (SBET), the total pore volume Vp, the pore mean size (lP=4Vp/SBET), the particle mean size (lS) and the pore size distribution (PSD). And the data from small angle light scattering were analyzed to determine the correlation function (γ'), the area per unit volume (S/V), average pore size (l ) and the average particle size...

Controlled swollen and drug release from urea-cross-linked polyether/siloxane hybrids

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Optische Mikroskopie an kolloidalen Suspensionen unter Nichtgleichgewichtsbedingungen

Kolloidale Suspensionen eignen sich aufgrund der für sierelevanten Längeskalen hervorragend zur Beobachtung mittelsoptischer Mikroskopie. Die Verwendung speziellerKontrastierverfahren kann bestimmte Aspekte kolloidalerStrukturen besonders hervorheben und eine verbesserteAnalyse von Nichtgleichgewichtszuständen in kolloidalenSystemen ermöglichen. Mittels Phasen- und Interferenzkontrast konnte die Ursachedes Kleinwinkelstreumaximums in der Lichtstreuung an einerSuspension aus Mikronetzteilchen auf die unterschiedlichenStrukturfaktoren von Kristall und Korngrenze zurückgeführtwerden.Der Zusammenhang von Struktur und Farbe eingetrockneterMultilagen wurde in hochauflösender Durchlichtmikroskopiedemonstriert und zur Analyse der inneren Struktur derKristalldomänen inklusive von Versetzungen und Stapelfehlernbenutzt.Mit der Polarisationsmikroskopie konnte die Veränderung derPartikelzahldichte um ein Ionentauscherbruchstück auf einenSalzkonzentrationsgradienten zurückgeführt werden. Die Untersuchung kolloidaler Suspensionen in einem Scherfeldmittels Fourier-Mikroskopie lieferte im Bereich fluiderGleichgewichtsstrukturen den Nachweis scherinduzierterhexagonaler Strukturen. Die Ultramikroskopie mit erweiterterSchärfentiefe ermöglichte die direkte Beobachtung desGleitmechanismus von verscherten hexagonalen Lagen und dieKlassifizierung durch die entwickelte2D-Partikelkorrelation. Die Scherung induziert in fluidenStrukturen hexagonale Ordnung und zerstört bei großenScherraten existierende Ordnung. Es wird eineWandstabilisierung der hexagonalen Strukturen beobachtet. Mittels Bragg-Mikroskopie konnte unter Scherung dieHomogenität der Struktur innerhalb der Scherzelledokumentiert werden sowie nach Scherung die Entstehung derGleichgewichts bcc Phase.

Untersuchungen zur Verfestigungskinetik in Suspensionen kolloidaler Partikel

Kolloidale Suspensionen, bei denen man die kolloidalen Teilchen als "Makroatome" in einem Kontinuum aus Lösungsmittelmolekülen auffaßt, stellen ein geeignetes Modellsystem zur Untersuchung von Verfestigungsvorgängen dar. Auf Grund der typischen beteiligten Längen- und Zeitskalen können Phasenübergänge bequem mit optischen Verfahren studiert werden. In der vorliegenden Arbeit wurde die Kinetik der Kristallisation in drei kolloidalen Systemen unterschiedlicher Teilchen-Teilchen-Wechselwirkung mit Lichtstreu- und mikroskopischen Methoden untersucht. Zur Untersuchung von Suspensionen aus sterisch stabilisierten PMMA-Teilchen, die in guter Näherung wie harte Kugeln wechselwirken, wurde ein neuartiges Laserlichtstreuexperiment aufgebaut, das die gleichzeitige Detektion von Bragg- und Kleinwinkelstreuung an einer Probe erlaubt. Damit konnte der zeitliche Verlauf der Kristallisation verfolgt sowie u.a. Nukleationsraten und erstmals auch Wachstumsgeschwindigkeiten bestimmt werden; diese wurden mit klassischer Nukleationstheorie sowie Wilson-Frenkel-Wachstum verglichen. In beiden Fällen konnte sehr gute Übereinstimmung mit der Theorie festgestellt werden. In Systemen geladener Partikel wurden mit Bragg-Mikroskopie die Wachstumsgeschwindigkeiten heterogener, an der Wand der Probenzelle aufwachsender Kristalle untersucht. Die Anpassung eines Wilson-Frenkel-Wachstumsgesetzes gelingt auch hier, wenn man die dazu eingeführte reskalierte Energiedichte auf den Schmelzpunkt bezieht. Geeignete Reskalierung der Daten erlaubt den Vergleich mit den Hartkugelsystemen. Zum ersten Mal wurde die Kristallisationskinetik in zwei verschiedenen kolloidalen binären Mischungen bestimmt und ausgewertet: In Beimischungen einer nichtkristallisierenden Teilchensorte zu einer kristallisierenden Suspension konnten die Daten mit einem modifizierten Wilson-Frenkel-Gesetz beschrieben werden, während in Mischungen aus zwei kristallisierenden Partikelsystemen eine unerwartet hohe Abnahme der Wachstumsgeschwindigkeiten beobachtet wurde. Kolloidale Suspensionen hartkugelähnlicher Mikrogel-Partikel konnten mit Hilfe des Lichtstreuaufbaues ebenfalls zum ersten Mal untersucht werden. Es wurde eine ähnliche Kristallisationskinetik wie in den PMMA-Systemen gefunden, jedoch auch einige wichtige Unterschiede, die insbesondere den Streumechanismus im Kleinwinkelbereich betrafen. Hier wurden verschiedene Interpretationsvorschläge diskutiert.

Relationship between fibre orientation and tensile strength of natural collagen membranes for heart valve leaflets

Heart valve prostheses are used to replace native heart valves which that are damaged because of congenital diseases or due to ageing. Biological prostheses made of bovine pericardium are similar to native valves and do not require any anticoagulation treatment, but are less durable than mechanical prostheses and usually fail by tearing. Researches are oriented in improving the resistance and durability of biological heart valve prostheses in order to increase their life expectancy. To understand the mechanical behaviour of bovine pericardium and relate it to its microstructure (mainly collagen fibres concentration and orientation) uniaxial tensile tests have been performed on a model material made of collagen fibres. Small Angle Light Scattering (SALS) has been also used to characterize the microstructure without damaging the material. Results with the model material allowed us to obtain the orientation of the fibres, relating the microstructure to mechanical performance