INVESTIGATION OF POROUS SILICON BY SCANNING-TUNNELING-MICROSCOPY AND ATOMIC-FORCE MICROSCOPY

The size and distribution of surface features of porous silicon layers have been investigated by scanning tunneling and atomic force microscopy. Pores and hillocks down to 1-2 nm size were observed, with their shape and distribution on the sample surface being influenced by crystallographic effects. The local density of electronic states show a strong increase above 2 eV, in agreement with recent theoretical predictions.

青藏高原青稞淀粉资源的评价

青稞（Hordeum vulgare L.var．nudum Hook．f.），即裸大麦，是兼食用、饲用和酿造于一体的作物，有着重要的利用价值。淀粉是青稞籽粒中含量最多、最重要的碳水化合物，淀粉含量、直支淀粉比将会直接影响淀粉的功能特性，进而影响淀粉的应用领域。我国青藏高原青稞的栽培和食用历史悠久，特色青稞资源极其丰富。目前关于青藏高原青稞淀粉特性的报道还不多见，筛选和培育特色淀粉青稞利于拓展青稞的应用领域, 从而提高其经济价值。 本研究以114份青藏高原青稞品种(系)为实验材料，通过SDS-PAGE对材料的胚乳淀粉颗粒结合蛋白（SGAPs）进行分离，确定各蛋白的分子量大小、组合类型和多态性等。然后按照国标法测试材料的籽粒总淀粉含量和直链淀粉含量，通过微型糊化粘度仪分析相应的淀粉糊化特性，最后使用显微镜观察比较了青稞的淀粉颗粒形态特征。主要结果如下： 1、114种青稞中共分离出20种不同的SGAP条带，条带分子量为35.00～112.39 KDa，分布频率为12.28～97.37%。材料含有的SGAPs条带数从10到14不等，超过一半的材料含11种SGAP条带。20种条带形成16种组合类型，其中西藏地区青稞包含所有16个组合类型，四川地区青稞包含其中12个组合类型。青藏高原青稞籽粒淀粉颗粒结合蛋白的差异很大，遗传多样性丰富。 2、114份青稞的总淀粉含量、直链淀粉含量、直支淀粉比、峰值粘度、糊化温度和峰值温度的变幅分别为51.26～66.70%、14.64～29.74%、0.17～0.42、194～1135BU、58.8～65.2℃和81.4～92.4℃，相应的平均值分别为59.82%、23.60%、0.31、722.30BU、62.1℃和88.8℃。群体在总淀粉含量、直链淀粉含量、直支淀粉比、峰值粘度、糊化温度和峰值温度上的分布具有明显的正态性；所有胚乳淀粉体的淀粉粒都呈复粒结构。对西藏和四川的材料进行了分组比较， 两地区的青稞在直链淀粉含量和直支淀粉比上的差异达到显著水平。 3、筛选出18份具有特殊淀粉特性的青稞品种，其中5份材料的总淀粉含量超过65%，包括NB63-1、NB67、甘孜白六棱、98221-1和NB63；3份材料的直链淀粉含量大于29%，包括藏青85、藏青3号和喜马拉6号；8份材料的直支淀粉比小于0.25，包括99033-6、春青稞、阿坝330、Jan-03、米麦114、396、NB63-1和92013；7份材料的糊化温度低于60℃，同时材料的峰值粘度大于1000BU,并且峰值温度低于90℃，包括足捉春、Jan-03、阿坝330、米麦114、春青稞、20003和阿青5号。 4、各淀粉特性间存在高度相关性。直链淀粉含量和直支淀粉比与糊化温度成极显著正相关，与峰值粘度成极显著负相关，与A型淀粉粒数量和大小呈负相关。不同SGAPs组合的品种之间，淀粉含量和淀粉糊化特性间差异均达显著水平。SGAP2、SGAP5、SGAP6和SGAP7可能对籽粒直链淀粉含量、直支淀粉比和糊化温度有正向效应；SGAP3、SGAP9∼SGAP20可能对峰值粘度有正向效应。 本研究对青藏高原青稞淀粉资源进行了较为全面的评价，对该区青稞淀粉特性有了系统的认识。研究筛选出的特殊青稞品种可作为青稞育种和青稞淀粉工业应用的潜在资源，淀粉特性差异巨大的众多青稞品种也为拓宽青稞应用领域提供了丰富的资源保障。本研究对部分SGAPs在性质上的鉴定和功能上的初步推断为青稞材料的筛选提供了指导，也为品质育种提供了理论参考。 Hulless barley (naked barley, Hordeum vulgare L.) is a short- season, early maturing crop with a wide range of adaptation. It has been attracting more and more attention due to its superior nutrition and extensive industrial applications. Starch is the main ingredient in hulless barley seeds which makes up 65 percent of hulless barley’s dry weight. The ratio of the amylose/amylopectin and the size, shape, distribution of starch granules can affect the physico-chemical and functional properties of starch, which may turn affect its utilizations. The Qinghai-Tibet Plateau, which is located in southwestern China, is a typical area of vertical agricultural ecosystem and one of the barley origin centers with abundant hulless barley resources. There are little reports about hulless barley in Qinghai-Tibet Plateau at present. To screen and cultivate some characteristic hulless barley can improve its value. An improved SDS-PAGE was used to identify SGAPs combination of 114 hulless barley varieties. Starch content (total starch and amylose starch) was determined according to the standard methods GB5006-85 and GB/T 15683 using PerkinElmer M341 Precision Automatic Polarimeter and UV spectrophotometer 755B respectively. The pasting properties were measured by BRABENDER Micrio Visco-Amylo- Graph 803201. The morphology of starch granules were observed and compared with Axioplan 2 Imaging light microscopy. The following were the results obtained: 1. There were 20 major SGAPs presented in 114 varieties, with the molecular weight ranged from 35.00 to 112.39 KDa, and the frequencies ranged from 12.28% to 97.37%. The number of SGAP bands in each accession varied from 10 to 14, more than half of the population had 11 bands. There were 16 distinct SGAP patterns in the 114 varieties, the Tibet hulless barley had all of the 16 types and the Sichuan hulless barley had 12 types. The results indicated the Qinghai-Tibet Plateau hulless barley had a polymorphism of the SGAPs. 2. The ranges of the total starch content, amylose content, Am/Ap, peak viscosity, pasting temperature and peak temperature of the 114 hulless barley were 51.26～66.70%,14.64～29.74%,0.17～0.42,194～1135BU,58.8～65.2 and 81.4℃～92.4, with an average of ℃59.82%, 23.60%, 0.31, 722.30BU, 62.1 and 88.8,℃℃ respectively. The distributions of the total starch content, amylose content, Am/Ap, peak viscosity, pasting temperature and peak temperature were visibly normal school. All of the amyloplasts in endosperm of varieties showed bimodal size distributions.The main starch properties of hulless barley from Tibet and Sichuan were separated and compared, the differences on amylose content and Am/Ap were obvious. 3. Eighteen accessions which had special starch properties were screened out. Five accessions with total starch content beyond 65%, including NB63-1, NB67, Ganzibailiuleng, 98221-1 and NB63; three accessions, Zangqing85, Zangqing3 and Ximala6, with the highest amylose content (>29%); five accessions with Am/Ap less than 0.25, including 99033-6, Chun Qingke, A Ba 330, Jan-03, Mi Mai114, 396, NB63-1 and 92013; seven accessions had a pasting temperature under 60, ℃meanwhile their peak viscosity beyond 1000BU and their peak temperature under 90℃，including Zu Cuochun, Jan-03, A Ba 330, Mi Mai 114, Chun Qingke, 20003 and A Qing 5. 4. There were high correlations between starch properties. Amylose content and Am/Ap were positively correlated to pasting temperature, negatively correlated to peak viscosity, negatively correlated to the number and granule size of A-type granule. Different SGAP combinations caused significant diversities in starch content and pasting properties. SGAP2, SGAP5, SGAP6 and SGAP7 may have positive effect on amylose content, Am/Ap and pasting temperature; SGAP3, SGAP9∼SGAP20 may have positive effect on peak viscosity. Our research made a comprehensive evaluation on the hulless barley starch from the Qinghai-Tibet Plateau, we can get a systemic understanding. Some special accessions were screened out can be used on the hulless barley breeding lines and industries utilization.The combination of the SGAPs may become a criterion to evaluate the hulless barley endosperm starch quality. Consequently, the results will be good information for further studies on the hulless barley.

Urban functional structure characteristics and transformation in China

The paper analyzes urban functional structure characteristics of Chinese cities in 1996 using the Nelson method. The manufacturing employment percentage is much higher in metropolitan areas but is decreasing from 1989 to 1996. On the other hand, the weight of science, education, culture, hygiene, finance, insurance and real estate increases. The employment structure changes dramatically. Although the urbanization level of China is lower than that of the USA in 1955, the frequency distribution curve of urban functions is similar. The construction, transportation, commerce, finance, insurance, real estate, science, education, culture, hygiene and administration curves are normal. The mining employment converges on minor cities and the distribution is not normal. The urban function has changed with urban scale. The bigger the cities are, the smaller the manufacture, mining and construction employment weights, and the larger are the science, education, finance, insurance, real estate and administration weights. Commerce and transportation are distributed evenly and the difference is less. From the comparison in three zones of China, the employment percentage of manufacture, finance, insurance and real estate is higher in eastern coastal areas, while the employment percentage of science, education, administration is higher in western areas. (C) 2002 Elsevier Science Ltd. All rights reserved.

Effect of Heat Treatment Temperature on the Catalytic Performances of PtRu/C Catalysts for Methanol Electro-Oxidation

Non-ionic surfactant Triton X-100 was used as a stabilizer to prepare PtRu/C catalysts for methanol oxidation reaction (MOR). The cyclic voltammogram was used to investigate the catalytic activity for MOR of different PtRu/C catalysts. TG-DTA, EDX, XRD, XPS and TEM were Used to characterize the composition, structure and morphology of the as-prepared PtRu/C catalysts. It is found that the heat treatment plays a crucial role in the particles size, particles distribution of the PtRu/C catalysts and the oxidation state of platinum. The results show that 350 degrees C is an optimum heat treatment temperature. The as-synthesized catalyst heat-treated at this temperature exhibits the best catalytic performance for MOR.

Facile Synthesis and Luminescence Properties of Highly Uniform MF/YVO4:Ln(3+) (Ln = Eu, Dy, and Sm) Composite Microspheres

Uniform MF/YVO4:Ln(3+) (Ln = Eu, Dy, and Sm) composite microspheres have been prepared via a simple and economical wet-chemical route at ambient pressure and low temperature. Monodisperse micrometer-sized melamine formaldehyde (MF) colloidal particles were first fabricated by a condensation process of melamine with formaldehyde. Subsequently, well-dispersed YVO4 nanoparticles were successfully grown onto the MF microspheres to form core-shell structured composite particles in aqueous Solution. The as-obtained composite microspheres with perfect spherical shape are uniform in size and distribution, and the thickness and roughness of the YVO4 shells on MF cores could be tuned by varying the reaction temperature. The MF/YVO4:Ln(3+) composite phosphors show strong light emissions with different colors coming from different activator ions under ultraviolet excitation, which might find potential applications in fields such as light phosphor powders and advanced flat panel displays.

Preparation of poly(acrylamide-co-acrylic acid) aqueous latex dispersions using anionic polyelectrolyte as stabilizer

High-solids, low-viscosity, stable poly(acrylamide-co-acrylic acid) aqueous latex dispersions were prepared by the dispersion polymerization of acrylamide (AM) and acrylic acid (AA) in an aqueous solution of ammonium sulfate (AS) medium using anionic polyelectrolytes as stabilizers. The anionic polyelectrolytes employed include poly(2-acrylamido-2-methylpropanesulfonic acid sodium) (PAMPSNa) homopolymer and random copolymers of 2-acrylamido-2-methylpropanesulfonic acid sodium (AMPSNa) with methacrylic acid sodium (MAANa), acrylic acid sodium (AANa) or acrylamide (AM). The influences of stabilizer's structure, composition, molecular weight and concentration, AA/AM molar feed ratio, total monomer, initiator and aqueous solution of AS concentration, and stirring speed on the monomer conversion, the particle size and distribution, the bulk viscosity and stability of the dispersions, and the intrinsic viscosity of the resulting copolymer were systematically investigated. Polydisperse spherical as well as ellipsoidal particles were formed in the system. The broad particle size distributions indicated that coalescence of the particles takes place to a greater extent.

The polymorphism of lysozyme gene in Zhikong scallop (Chlamys farreri) and its association with susceptibility/resistance to Listonella anguillarum

Lysozyme functions as a crucial biodefence effector against the infection of bacterial pathogens in innate immunity. The nucleotide sequence polymorphisms in promoter region of a nuclear goose type lysozyme gene from Zhikong scallop Chlamys farreri (designated as CFLysG) were investigated to explore their association with susceptibility/resistance to Listonella anguillarum infection. Eight sites of single nucleotide polymorphisms (SNPs) and two sites of insert-deletion (ins-del) polymorphisms were identified in the promoter region of CFLysG. Two of them, -753 TATCTCGATCAGG ins-del polymorphism and -391 A-G SNP were selected to analyze their distribution in the susceptible and resistant stocks, which were identified according to the survival time after L. anguillarum challenge. Using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP), two genotypes were found at each site, which were ins/del and ins/ins at locus -753, and A/A and A/G at locus -391, respectively. The -753 ins/del genotype was more prevalent in the resistant stock than that in the susceptible stock, 30% vs 16.67% in frequency, but there was no significant difference in the frequency distribution between these two stocks (P=0.15). In contrast, the frequency of -391A/G genotype in the resistant stock was significantly higher (30%) than that in the susceptible stock (7.14%) (P=0.007), indicating a significant association with the resistance of Zhikong scallop to L anguillarum. To confirm the presumption, another independent challenge experiment was performed, in which the cumulative mortality of scallops with -391 A/A genotype (96.8%) was significantly higher than those with -391 A/G genotype (64.5%) (P=0.001), which further validate the association between -391 A/G genotype and the resistance of Zhikong scallop to L anguillarum. These results suggested that the -391 A/G could be a potential marker applied in future selection of Zhikong scallop with enhanced resistance to L anguillarum. (C) 2008 Elsevier Ltd. All rights reserved.

细粒沉积物多组分粒度特征及其成因机制研究

By using high-resolution laser grain size instrument Mastersizer 2000, the grain size distribution of windblown depositions (loess and sandy dunes), aqueous sediments (lake, river, riverside and foreshore sand), weathering crust, sloping materials and other fine-grain sediments are systemically measured. The multimodal characteristics of grain size distribution of these sediments are carefully studied. The standard patterns and their grain size characteristics of various sediments are systemically summarized. The discrepancies of multimodal distribution among windblown depositions, aqueous sediments and other sediments are concluded and the physical mechanisms of grain size multimodal distribution of various sediments are also discussed in this paper. The major conclusions are followed: 1. The multimodal characteristic of grain size distribution is a common feature in all sediments and results from properties of transportation medium, dynamic intensity, transportation manner and other factors. 2. The windblown depositions are controlled by aerodynamic forcing, resulting in that the median size of the predominant mode gradually decreases form sandy dunes to loess. Similarly, the aqueous sediments are impacted by dynamic forces of water currents and the median grain size of the predominant mode decreases gradually from river to lake sediments. Because the kinetic viscidity of air is lower than of water, the grain size of modes of windblown depositions is usually finer than that of corresponding modes of aqueous sediments. Typical characteristics of sediments grain size distribution of various sediments have been summarized in the paper: (1) Suspended particles which diameters are less than 75μm are dominant in loess and dust. There are three modes in loess’ grain size distribution: fine, median and coarse (the median size is <1μm、1-10μm、10-75μm, respectively). The coarse mode which percentage is larger than that of others is controlled by source distance and aerodynamic intensity of dust source areas. Some samples also have a saltation mode which median size is about 300-500μm. Our analysis demonstrates that the interaction of wind, atmospheric turbulence, and dust grain gravity along the dust transportation path results in a multimodal grain size distribution for suspended dust. Changes in the median sizes of the coarse and medium modes are related to variation in aerodynamic forcing (lift force related to vertical wind and turbulence) during dust entrainment in the source area and turbulence intensity in the depositional area. (2) There is a predominant coarse saltation mode in grain size distribution of sandy dunes, which median size is about 100-300μm and the content is larger than that of other modes. The grain size distribution curve is near axis symmetric as a standard logarithm normal function. There are some suspended particles in some samples of sandy dunes, which distribution of the fine part is similar to that of loess. Comparing with sandy samples of river sediments, the sorting property of sandy dunes is better than of river samples although both they are the saltation mode. Thus, the sorting property is a criterion to distinguish dune sands and river sands. (3) There are 5~6 modes (median size are <1μm, 1-10μm, 10-70μm, 70-150μm, 150-400μm, >400μm respectively) in grain size distribution of lacustrine sediments. The former 4 modes are suspensive and others are saltated. Lacustrine sediments can be divided into three types: lake shore facies, transitional facies and central lake facies. The grain size distributions of the three facies are distinctly different and, at the same time, the transition among three modes is also clear. In all these modes, the third mode is a criteria to identify the windblown deposition in the watershed. In lake shore sediments, suspended particles are dominant, a saltation mode sometimes occurs and the fourth mode is the most important mode. In the transitional facies, the percentage of the fourth mode decreases and that of the second mode increases from lake shore to central lake. In the central lake facies, the second mode is dominant. A higher content of the second mode indicates its position more close to the central lake. (4) The grain size distribution of river sediments is the most complex. It consist of suspension, saltation and rolling modes. In most situations, the percentage of the saltation mode is larger than that of other modes. The percentage of suspension modes of river sediments is more than of sandy dunes. The grain size distribution of river sediments indicates dynamic strength of river currents. If the fourth mode is dominant, the dynamic forcing of river is weaker, such as in river floodplain. If the five or sixth mode is dominant, the water dynamic forcing of rivers is strong. (5) Sediments can be changed by later forcing in different degree to form some complicated deposition types. In the paper, the grain size distribution of aqueous sediments of windblown deposition, windblown sediments of aqueous deposition, weathering crust and slope materials are discussed and analyzed. 3. The grain size distribution characteristics of different sediments are concluded: (1) Modal difference: Usually there are suspended and saltation modes in the windblown deposition. The third mode is dominant in loess dust and the fifth mode is predominant in sandy dunes. There are suspended, saltation and rolling particles in aqueous sediments. In lacustrine sediments, the second and fourth mode are predominant for central lake facies or lake shore facies, respectively. In river sediments, the fourth, or fifth, or sixth mode is predominant. Suspended modes: the grain size of suspended particles of windblown depositions usually is less than 75μm. The content of suspended particles is lower or none in sandy dunes. However, suspended particles of aqueous sediments may reach 150μm. Difference in grain size of suspended modes represents difference between transitional mediums and the strength of dynamic forcing. Saltation modes: the median size of saltation mode of sandy dunes fluctuates less than that of river sediments. (2) Loess dust and lacustrine sediment: Their suspended particles are clearly different. There is an obvious pit between the second and the third modes in grain size distribution of lacustrine sediments. The phenomenon doesn’t occur in loess dust. In lacustrine sediments, the second mode can be a dominant mode, such as central lake facies, and contents of the second and the third modes change reversely. However, the percentage of the third mode is always the highest in loess dust. (3) Dune Sand and fluvial sand: In these two depositions, the saltation particles are dominant and the median sizes of their saltation modes overlay in distribution range. The fifth mode of dune sand fluctuates is sorted better than that of fluvial sand. (4) Lacustrine and fluvial sediments: In lacustrine sediments, there are 5-6 modes and suspended particles can be predominant. The second mode is dominant in central lake facies and the third mode is dominant in lake shore facies. Saltation or roll modes occurred in central lake facies may indicate strong precipitation events. In fluvial sediments, saltation particles (or rolling particles) usually dominant. 4. A estimation model of lake depth is firstly established by using contents of the second, the third and the fourth modes. 5. The paleoenvironmental history of the eastern part of SongLiao basin is also discussed by analyzing the grain size distribution of Yushu loess-like sediments in Jilin. It was found that there is a tectonic movement before 40ka B.P. in SongLiao basin. After the movement, loess dust deposited in Yushu area as keerqin desert developed. In recent 2000 years, the climate became drier and more deserts activated in the eastern part of Song-Liao basin.

基于匹配追踪方法的地震信号时频分析研究

Seismic signal is a typical non-stationary signal, whose frequency is continuously changing with time and is determined by the bandwidth of seismic source and the absorption characteristic of the media underground. The most interesting target of seismic signal’s processing and explaining is to know about the local frequency’s abrupt changing with the time, since this kind of abrupt changing is indicating the changing of the physical attributes of the media underground. As to the seismic signal’s instantaneous attributes taken from time-frequency domain, the key target is to search a effective, non-negative and fast algorithm time-frequency distribution, and transform the seismic signal into this time-frequency domain to get its instantaneous power spectrum density, and then use the process of weighted adding and average etc. to get the instantaneous attributes of seismic signal. Time-frequency analysis as a powerful tool to deal with time variant non-stationary signal is becoming a hot researching spot of modern signal processing, and also is an important method to make seismic signal’s attributes analysis. This kind of method provides joint distribution message about time domain and frequency domain, and it clearly plots the correlation of signal’s frequency changing with the time. The spectrum decomposition technique makes seismic signal’s resolving rate reach its theoretical level, and by the method of all frequency scanning and imaging the three dimensional seismic data in frequency domain, it improves and promotes the resolving abilities of seismic signal vs. geological abnormal objects. Matching pursuits method is an important way to realize signal’s self-adaptive decomposition. Its main thought is that any signal can be expressed by a series of time-frequency atoms’ linear composition. By decomposition the signal within an over completed library, the time-frequency atoms which stand for the signal itself are selected neatly and self-adaptively according to the signal’s characteristics. This method has excellent sparse decomposition characteristics, and is widely used in signal de-noising, signal coding and pattern recognizing processing and is also adaptive to seismic signal’s decomposition and attributes analysis. This paper takes matching pursuits method as the key research object. As introducing the principle and implementation techniques of matching pursuits method systematically, it researches deeply the pivotal problems of atom type’s selection, the atom dictionary’s discrete, and the most matching atom’s searching algorithm, and at the same time, applying this matching pursuits method into seismic signal’s processing by picking-up correlative instantaneous messages from time-frequency analysis and spectrum decomposition to the seismic signal. Based on the research of the theory and its correlative model examination of the adaptively signal decomposition with matching pursuit method, this paper proposes a fast optimal matching time-frequency atom’s searching algorithm aimed at seismic signal’s decomposition by frequency-dominated pursuit method and this makes the MP method pertinence to seismic signal’s processing. Upon the research of optimal Gabor atom’s fast searching and matching algorithm, this paper proposes global optimal searching method using Simulated Annealing Algorithm, Genetic Algorithm and composed Simulated Annealing and Genetic Algorithm, so as to provide another way to implement fast matching pursuit method. At the same time, aimed at the characteristics of seismic signal, this paper proposes a fast matching atom’s searching algorithm by means of designating the max energy points of complex seismic signal, searching for the most optimal atom in the neighbor area of these points according to its instantaneous frequency and instantaneous phase, and this promotes the calculating efficiency of seismic signal’s matching pursuit algorithm. According to these methods proposed above, this paper implements them by programmed calculation, compares them with some open algorithm and proves this paper’s conclusions. It also testifies the active results of various methods by the processing of actual signals. The problems need to be solved further and the aftertime researching targets are as follows: continuously seeking for more efficient fast matching pursuit algorithm and expanding its application range, and also study the actual usage of matching pursuit method.

Characteristics of WWW Client-based Traces

The explosion of WWW traffic necessitates an accurate picture of WWW use, and in particular requires a good understanding of client requests for WWW documents. To address this need, we have collected traces of actual executions of NCSA Mosaic, reflecting over half a million user requests for WWW documents. In this paper we describe the methods we used to collect our traces, and the formats of the collected data. Next, we present a descriptive statistical summary of the traces we collected, which identifies a number of trends and reference patterns in WWW use. In particular, we show that many characteristics of WWW use can be modelled using power-law distributions, including the distribution of document sizes, the popularity of documents as a function of size, the distribution of user requests for documents, and the number of references to documents as a function of their overall rank in popularity (Zipf's law). Finally, we show how the power-law distributions derived from our traces can be used to guide system designers interested in caching WWW documents.

Measuring morphological features using light-scattering spectroscopy and Fourier-domain low-coherence interferometry.

We present measurements of morphological features in a thick turbid sample using light-scattering spectroscopy (LSS) and Fourier-domain low-coherence interferometry (fLCI) by processing with the dual-window (DW) method. A parallel frequency domain optical coherence tomography (OCT) system with a white-light source is used to image a two-layer phantom containing polystyrene beads of diameters 4.00 and 6.98 mum on the top and bottom layers, respectively. The DW method decomposes each OCT A-scan into a time-frequency distribution with simultaneously high spectral and spatial resolution. The spectral information from localized regions in the sample is used to determine scatterer structure. The results show that the two scatterer populations can be differentiated using LSS and fLCI.

Analysis of species hyper-diversity in the tropical rain forests of Indonesia: the problem of non-observance

The main interest in the assessment of forest species diversity for conservation purposes is in the rare species. The main problem in the tropical rain forests is that most of the species are rare. Assessment of species diversity in the tropical rain forests is therefore often concerned with estimating that which is not observed in recorded samples. Statistical methodology is therefore required to try to estimate the truncated tail of the species frequency distribution, or to estimate the asymptote of species/diversity-area curves. A Horvitz-Thompson estimator of the number of unobserved (“virtual”) species in each species intensity class is proposed. The approach allows a definition of an extended definition of diversity, ( or generalised Renyi entropy). The paper presents a case study from data collected in Jambi, Sumatra, and the “extended diversity measure” is used on the species data.

Likelihood, entropy and species diversity; some comparisons in a Sumatran forest

In attempts to conserve the species diversity of trees in tropical forests, monitoring of diversity in inventories is essential. For effective monitoring it is crucial to be able to make meaningful comparisons between different regions, or comparisons of the diversity of a region at different times. Many species diversity measures have been defined, including the well-known abundance and entropy measures. All such measures share a number of problems in their effective practical use. However, probably the most problematic is that they cannot be used to meaningfully assess changes, since thay are only concerned with the number of species or the proportions of the population/sample which they constitute. A natural (though simplistic) model of a species frequency distribution is the multinomial distribution. It is shown that the likelihood analysis of samples from such a distribution are closely related to a number of entropy-type measures of diversity. Hence a comparison of the species distribution on two plots, using the multinomial model and likelihood methods, leads to generalised cross-entropy as the LRT test statistic of the null that the species distributions are the same. Data from 30 contiguous plots in a forest in Sumatra are analysed using these methods. Significance tests between all pairs of plots yield extremely low p-values, indicating strongly that it ought to been "Obvious" that the observed species distributions are different on different plots. In terms of how different the plots are, and how these differences vary over the whole study site, a display of the degrees of freedom of the test, (equivalent to the number of shared species) seems to be the most revealing indicator, as well as the simplest.

Relationships Between Seston Available Food And Feeding-Activity In The Common Mussel Mytilus-Edulis

The feeding and metabolic rates of Mytilus edulis L. of different body sizes were measured in response to changes in particle concentrations ranging from 2 to 350 mg l-1. Rates of oxygen consumption were not significantly affected by changes in seston concentration, whereas clearance rates gradually declined with increasing particle concentration. Pseudofaeces production was initiated at relatively low seston concentrations (<5 mg l-1). Marked seasonal changes were recorded in the composition of suspended particulates (seston) in an estuary in south-west England. Total seston was sampled at frequent intervals throughout an annual cycle and analysed in terms of: particle size-frequency distributions, total dry weight (mg l-1), inorganic content, chlorophyll a, carbohydrate, protein and lipid. The particulate carbohydrate, protein and lipid content provided an estimate of the food content of the seston. The results are discussed in terms of the “food available” to a nonselective suspension feeder, such as M. edulis, during a seasonal cycle. The effect of inorganic silt in suspension was mainly to limit by “dilution” the amount of food material ingested rather than to reduce the amount of material filtered by the mussel. In winter, the food content of the material ingested was 5%, and this increased to 25% during the spring and summer.

An updated climatology of surface dimethlysulfide concentrations and emission fluxes in the global ocean

The potentially significant role of the biogenic trace gas dimethylsulfide (DMS) in determining the Earth's radiation budget makes it necessary to accurately reproduce seawater DMS distribution and quantify its global flux across the sea/air interface. Following a threefold increase of data (from 15,000 to over 47,000) in the global surface ocean DMS database over the last decade, new global monthly climatologies of surface ocean DMS concentration and sea-to-air emission flux are presented as updates of those constructed 10 years ago. Interpolation/extrapolation techniques were applied to project the discrete concentration data onto a first guess field based on Longhurst's biogeographic provinces. Further objective analysis allowed us to obtain the final monthly maps. The new climatology projects DMS concentrations typically in the range of 1–7 nM, with higher levels occurring in the high latitudes, and with a general trend toward increasing concentration in summer. The increased size and distribution of the observations in the DMS database have produced in the new climatology substantially lower DMS concentrations in the polar latitudes and generally higher DMS concentrations in regions that were severely undersampled 10 years ago, such as the southern Indian Ocean. Using the new DMS concentration climatology in conjunction with state-of-the-art parameterizations for the sea/air gas transfer velocity and climatological wind fields, we estimate that 28.1 (17.6–34.4) Tg of sulfur are transferred from the oceans into the atmosphere annually in the form of DMS. This represents a global emission increase of 17% with respect to the equivalent calculation using the previous climatology. This new DMS climatology represents a valuable tool for atmospheric chemistry, climate, and Earth System models.