Detecting Ca2+ sparks on stationary and varying baselines.

Studies concerning the physiological significance of Ca2+ sparks often depend on the detection and measurement of large populations of events in noisy microscopy images. Automated detection methods have been developed to quickly and objectively distinguish potential sparks from noise artifacts. However, previously described algorithms are not suited to the reliable detection of sparks in images where the local baseline fluorescence and noise properties can vary significantly, and risk introducing additional bias when applied to such data sets. Here, we describe a new, conceptually straightforward approach to spark detection in linescans that addresses this issue by combining variance stabilization with local baseline subtraction. We also show that in addition to greatly increasing the range of images in which sparks can be automatically detected, the use of a more accurate noise model enables our algorithm to achieve similar detection sensitivities with fewer false positives than previous approaches when applied both to synthetic and experimental data sets. We propose, therefore, that it might be a useful tool for improving the reliability and objectivity of spark analysis in general, and describe how it might be further optimized for specific applications.

Creativity for Feist

This paper develops an understanding of creativity to meet the requirements of the decision of the Supreme Court of the United States in Feist v. Rural (1991). The inclusion of creativity in originality, in a minimal degree of creativity, and in a creative spark below the level required for originality, is first established. Conditions for creativity are simultaneously derived. Clauses negatively implying creativity are then identified and considered.

The clauses which imply creativity can be extensively correlated with conceptions of computability. The negative of creativity is then understood as an automatic mechanical or computational procedure or a so routine process which results in a highly routine product. Conversely, creativity invariantly involves a not mechanical procedure. The not mechanical is then populated by meaning, in accord with accepted distinctions, drawing on a range of discourses. Meaning is understood as a different level of analysis to the syntactic or mechanical and also as involving direct human engagement with meaning. As direct engagement with meaning, it can be connected to classic concepts of creativity, through the association of dissimilars. Creativity is finally understood as not mechanical human activity above a certain level of routinicity.

Creativity is then integrated with a minimal degree of creativity and with originality. The level of creativity required for a minimal degree is identified as intellectual. The combination of an intellectual level with a sufficient amount of creativity can be read from the exchange values connected with the product of creative activity. Humanly created bibliographic records and indexes are then possible correlates to or constituents of a minimal degree of creativity. A four stage discriminatory process for determining originality is then specified. Finally, the strength and value of the argument are considered.

Finally, the strength and value of the argument are considered.

Ca(2+) sparks promote myogenic tone in retinal arterioles

Background and Purpose: Ca(2+) imaging reveals subcellular Ca(2+) sparks and global Ca(2+) waves/oscillations in vascular smooth muscle. It is well established that Ca(2+) sparks can relax arteries, but we have previously reported that sparks can summate to generate Ca(2+) waves/oscillations in unpressurized retinal arterioles, leading to constriction. We have extended these studies to test the functional significance of Ca(2+) sparks in the generation of myogenic tone in pressurized arterioles.

Experimental Approach: Isolated retinal arterioles (25-40 μm external diameter) were pressurized to 70 mmHg, leading to active constriction. Ca(2+) signals were imaged from arteriolar smooth muscle in the same vessels using Fluo4 and confocal laser microscopy.

Key Results: Tone development was associated with an increased frequency of Ca(2+) sparks and oscillations. Vasomotion was observed in 40% of arterioles and was associated with synchronization of Ca(2+) oscillations, quantifiable as an increased cross-correlation coefficient. Inhibition of Ca(2+) sparks with ryanodine, tetracaine, cyclopiazonic acid or nimodipine, or following removal of extracellular Ca(2+) , resulted in arteriolar relaxation. Cyclopiazonic acid-induced dilatation was associated with decreased Ca(2+) sparks and oscillations but with a sustained rise in the mean global cytoplasmic [Ca(2+) ] ([Ca(2+) ]c ), as measured using Fura2 and microfluorimetry.

Conclusions and Implications: This study provides direct evidence that Ca(2+) sparks can play an excitatory role in pressurized arterioles, promoting myogenic tone. This contrasts with the generally accepted model in which sparks promote relaxation of vascular smooth muscle. Changes in vessel tone in the presence of cyclopiazonic acid correlated more closely with changes in spark and oscillation frequency than global [Ca(2+) ]c , underlining the importance of frequency-modulated signalling in vascular smooth muscle.

Design and testing of transonic linear cascade tunnel with optimized slotted walls

In linear cascade wind tunnel tests, a high level of pitchwise periodicity is desirable to reproduce the azimuthal periodicity in the stage of an axial compressor or turbine. Transonic tests in a cascade wind tunnel with open jet boundaries have been shown to suffer from spurious waves, reflected at the jet boundary, that compromise the flow periodicity in pitch. This problem can be tackled by placing at this boundary a slotted tailboard with a specific wall void ratio s and pitch angle a. The optimal value of the s-a pair depends on the test section geometry and on the tunnel running conditions. An inviscid two-dimensional numerical method has been developed to predict transonic linear cascade flows, with and without a tailboard, and quantify the nonperiodicity in the discharge. This method includes a new computational boundary condition to model the effects of the tailboard slots on the cascade interior flow. This method has been applied to a six-blade turbine nozzle cascade, transonically tested at the University of Leicester. The numerical results identified a specific slotted tailboard geometry, able to minimize the spurious reflected waves and regain some pitchwise flow periodicity. The wind tunnel open jet test section was redesigned accordingly. Pressure measurements at the cascade outlet and synchronous spark schlieren visualization of the test section, with and without the optimized slotted tailboard, have confirmed the gain in pitchwise periodicity predicted by the numerical model. Copyright © 2006 by ASME.

Understanding the Flash Sintering of Rare-Earth-Doped Ceria for Solid Oxide Fuel Cell

A novel electrical current applied technique known as flash sintering has been applied to rapidly (within 10 min) densify electrolytes including Ce_0.8Gd_0.2O_1.9 (GDC20), Ce_0.9Gd_0.1O_1.95 (GDC10), and Ce_0.8Sm_0.2O_1.9 (SDC20) for application in Solid Oxide Fuel Cells (SOFCs). The densification temperature for the three electrolytes was 554°C, 635°C, and 667°C, respectively, which is far below conventional sintering temperatures. All specimens after flash sintering maintained the pure fluorite structure and exhibited a well-densified microstructure. To investigate the flash-sintering mechanism, we have applied Joule heating effect with blackbody radiation theory, and found that this theory could reasonably interpret the flash-sintering phenomenon by matching theoretically calculated temperature with the real temperature. More importantly, one of the materials inherent properties, the electronic conductivity, has been found correlated with the onset of flash sintering, which indicates that the electrons and holes are the primary current carriers during the start of flash-sintering process. As a result, potential densification mechanisms have been discussed in terms of spark plasma discharge.

The VINEYARD Approach: Versatile, Integrated, Accelerator-Based, Heterogeneous Data Centres.

Emerging web applications like cloud computing, Big Data and social networks have created the need for powerful centres hosting hundreds of thousands of servers. Currently, the data centres are based on general purpose processors that provide high flexibility buts lack the energy efficiency of customized accelerators. VINEYARD aims to develop an integrated platform for energy-efficient data centres based on new servers with novel, coarse-grain and fine-grain, programmable hardware accelerators. It will, also, build a high-level programming framework for allowing end-users to seamlessly utilize these accelerators in heterogeneous computing systems by employing typical data-centre programming frameworks (e.g. MapReduce, Storm, Spark, etc.). This programming framework will, further, allow the hardware accelerators to be swapped in and out of the heterogeneous infrastructure so as to offer high flexibility and energy efficiency. VINEYARD will foster the expansion of the soft-IP core industry, currently limited in the embedded systems, to the data-centre market. VINEYARD plans to demonstrate the advantages of its approach in three real use-cases (a) a bio-informatics application for high-accuracy brain modeling, (b) two critical financial applications, and (c) a big-data analysis application.

Development of sialons colloidally processed in aqueous medium

Desenvolveu-se um novo método de processamento coloidal em meio aquoso para consolidar cerâmicos de α-Y-SiAlON, os quais foram sinterizados por prensagem isostática a quente (HIP) e por spark plasma sintering (SPS). Preparou-se com sucesso uma suspensão aquosa de pós precursores de YSiAlON (Si3N4, Al2O3, Y2O3 e AlN), temporariamente estável, usando Dolapix PC21 como dispersante, permitindo a fabricação de pós granulados pela técnica de aspersão-congelamento-liofilização e a consolidação de corpos em verde por enchimento por barbotina. Avaliou-se o efeito do excesso de oxigénio introduzido pelo processamento aquoso no desenvolvimento microestrutural e nas propriedades mecânicas. Os corpos de Y-SiAlON consolidados por enchimento por barbotina e sinterizados por HIP a 1800ºC apresentaram microestruturas e propriedades mecânicas similares a corpos consolidados por prensagem a seco. Estes materiais exibiram densificação completa, dureza Vickers máxima de 2003 e tenacidade à fractura (método SEVNB) máxima de 5.20 MPam1/2. Foi ainda possível estabelecer uma relação estreita entre o aumento do conteúdo em oxigénio das amostras sinterizadas e a diminuição da tenacidade à fractura. Na tentativa de melhorar a tenacidade à fractura dos materiais, procedeu-se à incorporação nas suspensões de sementes de Ca-α-SiAlON de geometria alongada produzidas por síntese por combustão, adicionadas como agentes de reforço. A síntese por combustão realizada em larga escala (cargas até 1 kg) não produziu efeitos negativos óbvios nos produtos da reacção. Investigara-se os efeitos da adição de 5 % em peso de sementes nas propriedades mecânicas e no desenvolvimento microestrutural de amostras densificadas por HIP. Em comparação com os materiais sem sementes, a tenacidade à fractura (método SEVNB) aumentou 13%, mas a dureza Vickers resultou 14,5% inferior. A sinterização por SPS permitiu obter densificação completa a temperaturas tão baixas como 1600ºC a partir dos pós granulados de Y-SiAlON sem a adição extra de Y2O3 para aumentar o teor de fase líquida. Os materiais sinterizados a 1700ºC e 1600ºC mostraram valores máximos de tenacidade à fractura de 4.36 e 4.20 MPam1/2 (método SEVNB), e de dureza Vickers de 2089 e 2084, respectivamente. Esta técnica de sinterização permitiu ainda obter corpos sinterizados translúcidos com uma transmitância máxima de 61% numa amostra de 2mm de espessura. Os corpos translúcidos apresentaram dureza Vickers de 2154 e tenacidade à fractura 3.74 MPam1/2 (método SEVNB).

Between the Bullet and the Hole

Between the Bullet and the Hole is a film centred on the elusive and complex effects of war on women's role in ballistic research and early computing. The film features new and archival high-speed bullet photography, schlieren and electric spark imagery, bullet sound wave imagery, forensic ballistic photography, slide rulers, punch cards, computer diagrams, and a soundtrack by Scanner. Like a frantic animation storyboard, it explores the flickering space between the frames, testing the perceptual mechanics of visual interpolation, the possibility of reading or deciphering the gap between before and after. Interpolation - the main task of the women studying ballistics in WW2 - is the construction or guessing of missing data using only two known data points. The film tries to unpack this gap, open it up to interrogation. It questions how we read, interpolate or construct the gaps between bullet and hole, perpetrator and victim, presence and absence. The project involves exchanges with specialists in this area such as the Cranfield University Forensics department, London-based Forensic Firearms consultancy, the Imperial War Museum, the ENIAC programmers project, the Smithsonian Institute, and Forensic Scientists at Palm Beach County Sheriff's Office (USA). Exhibitions: Solo exhibition at Dallas Contemporary (Texas, Jan-Mar 2016), including newly commissioned lenticular prints and a dual slide projector installation; Group exhibition the Sydney Biennale (Sydney, Mar-June 2016); UK premiere and solo retrospective screening at Whitechapel Gallery (London); forthcoming solo exhibition at Iliya Fridman Gallery (NY, Oct-Dec 2016); Film festivals and screenings: International Film Festival Rotterdam (Jan 2016); Whitechapel Gallery (London Feb 2016); Cornerhouse/Home (Manchester Nov 2016); Public lectures: Whitechapel Gallery with prof. David Alan Grier and Morgan Quaintance; Carriageworks (Sydney) Prof. Douglas Khan; Monash University (Melbourne); Gertrude Space (Melbourne). Reviews and interviews: Artforum, Studio International, Mousse Magazine.

Receptivity to Self-Service Technology (SST): A Research Overview and the Way Forward

In a digital era characterised by the need for efficiency and value, self-service technology rises as a delivery interface offered by public and private sector service providers. With the assumption of a win-win situation for both the provider and customers who can ‘do it themselves’ online/offsite and offline/onsite, stereotypes arise concerning antecedents for positive receptivity and impediments in adopting SSTs. The present paper offers a literature-based discussion of some of the existing and emerging perspectives in this domain; it delivers a contextual review of studies conducted, highlights controversial viewpoints that need to be reconsidered, and suggests future research themes that can make use of the emergent digital sources in data collection and analysis. The purpose is to spark future research on the extent to which SST is a champion for different service types, and to systematically study the customer profile to be targeted for its optimal use in value co-creation.

Transforming relationship marketing via subversive readings

Where is the consumer represented within the discourses of Relationship Marketing? In our paper we deconstruct and critically (but productively) interrogate current Relationship Marketing discourse; and we argue for reconceptualising RM as a field of study through a transformatory process which involves the subversive reading of its academic texts. We argue that the consumer is silenced within relationship marketing discourse in a way that is fundamentally analogous with the gynopia (absence of women) in early sociological enquiry. Given that the means of transformation can potentially be found within contemporary feminist research, one of the main aims of this paper is to examine the parameters of feminist research and theory by presenting and explaining three representative frameworks (Fonow & Cook 1991, Maynard & Purvis 1994 and Harding 1988). The interrogative questions generated from the reading of feminist texts provide a framework to enable a close reading of RM ‘texts’. Using a form of discourse analysis, we read both ‘with the text’ and ‘against the grain’ (Tonkiss 1998:258) looking for ‘silences and gaps’ and making ‘conjectures about alternative accounts which are excluded by omission’ as well as those deliberately ‘countered by rhetoric’ (Tonkiss 1998:258). By striking together feminist methodology and a selected Relationship Marketing text to see if they spark (Brown 1999) our stance is activist and our purpose is to accelerate a restoration of the consumer’s voice as a central theoretical concern of this branch of Marketing.

Molecular mechanics calculations on some phosphine oxide metal complexes in aqueous and organic solvents

Molecular mechanics calculations were done on tetrahedral phosphine oxide zinc complexes in simulated water, benzene and hexane phases using the DREIDING II force field in the BIOGRAF molecular modeling program. The SUN workstation computer (SUN_ 4c, with SPARK station 1 processor) was used for the calculations. Experimental structural information used in the parameterization was obtained from the September 1989 version of the Cambridge Structural Database. 2 Steric and solvation energies were calculated for complexes of the type ZnCl2 (RlO)2' The calculations were done with and without inclusion of electrostatic interactions. More reliable simulation results were obtained without inclusion of charges. In the simulated gas phase, the steric energies increase regularly with number of carbons in the alkyl group, whereas they go through a maximum when solvent shells are included in the calculation. Simulated distribution ratios vary with chain length and type of chain branching and the complexes are found to be more favourable for extraction by benzene than by hexane, in accord with experimental data. Also, in line with what would be expected for a favorable extraction, calculations without electrostatics predict that the complexes are better solvated by the organic solvents than by water.

Conscience and Attestation : The Methodological Role of the “Call of Conscience” (Gewissensruf) in Heidegger’s Being and Time

Travail réalisé en cotutelle (Université de Paris IV-La Sorbonne).

Analyse de la transnationalisation de l’action collective : proposition pour une géographie des solidarités transnationales.

Cet article propose une réflexion théorique autour de l’analyse des phénomènes de transnationalisation de l’action collective. L’approche du processus politique, approche dominante dans le champ de la transnationalisation, limite notre compréhension des pratiques de transnationalisation par sa conception du politique, du pouvoir et du changement social (partie I). Ces limites conceptuelles, qui ne sont pas nouvelles, prennent cependant une couleur particulière dans le cas des actions qui transcendent le territoire national et font resurgir la nécessité de penser l’action collective par le biais d’une « géographie » des solidarités transnationales (partie II). Finalement, nous décrivons le cas exemplaire de transnationalisation des solidarités que représente la Marche mondiale des femmes, qui contraste les apports respectifs de l’approche des processus politiques et celle proposée ici (partie III).

Une politique concernant les données issues d’un programme de recherches interventionnelles en santé mondiale

Article

High power N2 laser with a modified gas flow system and discharge geometry

A high power Nz laser of the double-Blumlein type having a modified gas flow system, electrode configuration, and discharge geometry with minimum inductance is described. By incorporating a triggere’d-pressurized spark gap switch, arc-free operation was achieved for a wide E/P range. The device gives a peak power in excess of 700 kW with a FWHM of 3 ns and an efficiency of 0.51%, which is remarkably high for a pulsed nitrogen laser system. The dependence of output power on parameters such as operating pressure, voltage, and repetition rate are discussed.