Pushover analysis of an existing reinforced concrete bridge:Jamboree Road Overcrossing in Irvine, California

The work for the present thesis started in California, during my semester as an exchange student overseas. California is known worldwide for its seismicity and its effort in the earthquake engineering research field. For this reason, I immediately found interesting the Structural Dynamics Professor, Maria Q. Feng's proposal, to work on a pushover analysis of the existing Jamboree Road Overcrossing bridge. Concrete is a popular building material in California, and for the most part, it serves its functions well. However, concrete is inherently brittle and performs poorly during earthquakes if not reinforced properly. The San Fernando Earthquake of 1971 dramatically demonstrated this characteristic. Shortly thereafter, code writers revised the design provisions for new concrete buildings so to provide adequate ductility to resist strong ground shaking. There remain, nonetheless, millions of square feet of non-ductile concrete buildings in California. The purpose of this work is to perform a Pushover Analysis and compare the results with those of a Nonlinear Time-History Analysis of an existing bridge, located in Southern California. The analyses have been executed through the software OpenSees, the Open System for Earthquake Engineering Simulation. The bridge Jamboree Road Overcrossing is classified as a Standard Ordinary Bridge. In fact, the JRO is a typical three-span continuous cast-in-place prestressed post-tension box-girder. The total length of the bridge is 366 ft., and the height of the two bents are respectively 26,41 ft. and 28,41 ft.. Both the Pushover Analysis and the Nonlinear Time-History Analysis require the use of a model that takes into account for the nonlinearities of the system. In fact, in order to execute nonlinear analyses of highway bridges it is essential to incorporate an accurate model of the material behavior. It has been observed that, after the occurrence of destructive earthquakes, one of the most damaged elements on highway bridges is a column. To evaluate the performance of bridge columns during seismic events an adequate model of the column must be incorporated. Part of the work of the present thesis is, in fact, dedicated to the modeling of bents. Different types of nonlinear element have been studied and modeled, with emphasis on the plasticity zone length determination and location. Furthermore, different models for concrete and steel materials have been considered, and the selection of the parameters that define the constitutive laws of the different materials have been accurate. The work is structured into four chapters, to follow a brief overview of the content. The first chapter introduces the concepts related to capacity design, as the actual philosophy of seismic design. Furthermore, nonlinear analyses both static, pushover, and dynamic, time-history, are presented. The final paragraph concludes with a short description on how to determine the seismic demand at a specific site, according to the latest design criteria in California. The second chapter deals with the formulation of force-based finite elements and the issues regarding the objectivity of the response in nonlinear field. Both concentrated and distributed plasticity elements are discussed into detail. The third chapter presents the existing structure, the software used OpenSees, and the modeling assumptions and issues. The creation of the nonlinear model represents a central part in this work. Nonlinear material constitutive laws, for concrete and reinforcing steel, are discussed into detail; as well as the different scenarios employed in the columns modeling. Finally, the results of the pushover analysis are presented in chapter four. Capacity curves are examined for the different model scenarios used, and failure modes of concrete and steel are discussed. Capacity curve is converted into capacity spectrum and intersected with the design spectrum. In the last paragraph, the results of nonlinear time-history analyses are compared to those of pushover analysis.

The physical city and the urban structure: detecting amenity zones and applying urban morphology to New York

The city is a collection of built structures and infrastructure embedded in socio-cultural processes: any investigation into a city’s transformations involves considerations on the degree to which its composite elements respond to socio-economical changes. The main purpose of this research is to investigate how transformations in the functional requirements of New York’s society have spurred, since the 1970s, changes in both the city’s urban structure and physical form. The present work examines the rise of Amenity Zones in New York, and investigates the transformations that have occurred in New York’s built environment since the 1970s. By applying qualitative measures and analyzing the relationship between urban amenities and the creative class, the present work has investigated changes in the urban structure and detected a hierarchical series of amenity zones classes, namely, Super Amenity Zones (SAZs), Nodal Amenity Zones (NAZs) and Peripheral Amenity Zones (PAZs). This series allows for a more comprehensive reading of the urban structure in a complex city like New York, bringing advancements to the amenity zone’s methodology. In order to examine the manner in which the other component of the city, the physical form, has changed or adapted to the new socio-economic condition, the present research has applied Conzenian analysis to a select study area, Atlantic Avenue. The results of this analysis reveal that, contrary to the urban structure, which changes rapidly, the physical form of New York is hard to modify completely, due to the resilience of the town plan and its elements, and to preservation laws; the city rather adapts to socio-economical changes through process of adaptive reuses or conversion. Concluding, this research has examined the dialectic between the ever-changing needs of society and the complexity of the built environment and urban structure, showing the different degrees to which the urban landscape modifies, reacts and sometimes adapts to the population’s functional requirements.

(De)colonization through topophilia: Marjorie Kinnan Rawlings’s life and work in Florida

(De)colonization Through Topophilia: Marjorie Kinnan Rawlings’s Life and Work in Florida attempts to reveal the author’s intimate connection to and mental growth through her place, namely the Cross Creek environs, and its subsequent effect on her writing. In 1928, Marjorie Kinnan Rawlings and her first husband Charles Rawlings came to Cross Creek, Florida. They bought the shabby farmhouse on Cross Creek Road, trying to be both, writers and farmers. However, while Charles Rawlings was unable to write in the backwoods of the Florida Interior, Rawlings found her literary voice and entered a symbiotic, reciprocal relationship with the natural world of the Cracker frontier. Her biographical preconditions – a childhood spent in the rural area of Rock Creek, outside of Washington D. C. - and a father who had instilled in her a sense of place or topophilia, enabled her to overcome severe marriage tensions and the hostile climate women writers faced during the Depression era. Nature as a helping ally and as an “undomesticated”(1) space/place is a recurrent motif throughout most of Rawlings’s Florida literature. At a time when writing the American landscape/documentary and the extraction of the self from texts was the prevalent literary genre, Marjorie Kinnan Rawlings inscribed herself into her texts. However, she knew that the American public was not yet ready for a ‘feminist revolt’, but was receptive of the longtime ‘inaudible’ voices from America’s regions, especially with regard to urban poverty and a homeward yearning during the Depression years. Fusing with the dynamic eco-consciousness of her Cracker friends and neighbors, Rawlings wrote in the literary category of regionalism enabling her to pursue three of her major aims: an individuated self, a self that assimilated with the ‘master narratives’ of her time and the recognition of the Florida Cracker and Scrub region. The first part of this dissertation briefly introduces the largely unknown and underestimated writer Marjorie Kinnan Rawlings, providing background information on her younger years, the relationship toward her family and other influential persons in her life. Furthermore, it takes a closer look at the literary category of regionalism and Rawlings’s use of ‘place’ in her writings. The second part is concerned with the ‘region’ itself, the state of Florida. It focuses on the natural peculiarities of the state’s Interior, the scrub and hammock land around her Cracker hamlet as well as the unique culture of the Florida Cracker. Part IV is concerned with the analysis of her four Florida books. The author is still widely related to the ever-popular novel The Yearling (1938). South Moon Under (1933) and Golden Apples (1935), her first two novels, have not been frequently republished and have subsequently fallen into oblivion. Cross Creek (1942), Rawlings’s last Florida book, however, has recently gained renewed popularity through its use in classes on nature writers and the non-fiction essay but it requires and is here re-evaluated as the author’s (relational) autobiography. The analysis through place is brought to completion in this work and seems to intentionally close the circle of Rawlings’s Florida writings. It exemplifies once more that detachment from place is impossible for Rawlings and that the intermingling of life and place in literature, is essential for the (re)creation of her identity. Cross Creek is therefore not only one of Rawlings’s greatest achievements; it is more importantly the key to understanding the author’s self and her fiction. Through the ‘natural’ interrelationship of place and self and by looking “mutually outward and inward,”(2) Marjorie Kinnan Rawlings finds her literary voice, a home and ‘a room of her own’ in which to write and come to consciousness. Her Florida literature is not only product but also medium and process in her assessment of her identity and self. _____________ (1) Alaimo, Stacy. Undomesticated Ground: Recasting Nature as Feminist Space (Ithaca: Cornell UP, 2000) 23. (2) Libby, Brooke. “Nature Writing as Refuge: Autobiography in the Natural World” Reading Under the Sign of Nature. New Essays in Ecocriticism. Ed. John Tallmadge and Henry Harrington. (Salt Lake City: The U of Utah P, 2000) 200.

Pavement and alignment design of a new rural road in the province of Bologna

This thesis aims to give a general view of pavement types all over the world, by showing the different characteristics of each one and its different life steps starting from construction, passing by maintenance and arriving until recycling phase. The flexible pavement took the main part of this work because it has been used in the last part of this thesis to design a project of a rural road. This project is located in the province of Bologna-Italy (‘Comune di Argelato’, 26 km in the north of Bologna), and has 5677, 81 m of length. A pavement design was made using the program BISAR 3.0 and a fatigue life study was made, also, in order to estimate the number of loads (in terms of heavy vehicles axle) to cause road’s failure . An alignment design was made for this project and a safety study was established in order to check if the available sight distance at curves respects the safety norms or not, by comparing it to the stopping sight distance. Different technical sheets are demonstrated and several cases are discussed in order to clarify the main design principles and underline the main hazardous cases to be avoided especially at intersection. This latter, its type’s choice depends on several factors in order to make the suitable design according to the environmental data. At this part of the road, the safety is a primordial point due to the high accident rate in this zone. For this reason, different safety aspects are discussed especially at roundabouts, signalized intersections, and also some other common intersection types. The design and the safety norms are taken with reference to AASHTO (American Association of State Highway and Transportation Officials), ACT (Transportation Association of Canada), and also according to Italian norms (Decreto Ministeriale delle Starde).

Border Trade and Economic Zones on the North-South Economic Corridor: Focusing on the Connecting Points between the Four Countries

The North-South Economic Corridor (NSEC), the road between Bangkok and Kunming, China, including the Laos route (R3B) and the Myanmar route (R3B), has been developed since 1998 following the GMS program. The region covering Yunnan Province in China, Shan State in Myanmar, Northern Laos and Northern Thailand has historical and ethnic closeness, and is a comparatively poor mountainous, boundary area. In the wake of the development of the NSEC, however, the region has started to show signs of change. Consequently, a review is to be carried out concerning the movement of people and cars, border trade and the situation concerning the progress of border economic zones at the five nodal border points in the four countries, and over three routes: R3A, R3B, and the Mekong River route.

Road environment modeling using robust perspective analysis and recursive Bayesian segmentation

Recently, vision-based advanced driver-assistance systems (ADAS) have received a new increased interest to enhance driving safety. In particular, due to its high performance–cost ratio, mono-camera systems are arising as the main focus of this field of work. In this paper we present a novel on-board road modeling and vehicle detection system, which is a part of the result of the European I-WAY project. The system relies on a robust estimation of the perspective of the scene, which adapts to the dynamics of the vehicle and generates a stabilized rectified image of the road plane. This rectified plane is used by a recursive Bayesian classi- fier, which classifies pixels as belonging to different classes corresponding to the elements of interest of the scenario. This stage works as an intermediate layer that isolates subsequent modules since it absorbs the inherent variability of the scene. The system has been tested on-road, in different scenarios, including varied illumination and adverse weather conditions, and the results have been proved to be remarkable even for such complex scenarios.

¿Impact from road transport of radioactive wastes in Spain?

Transports of radioactive wastes in Spain are becoming issues of renewed interest, due to the increased mobility of these materials which can be expected after the building and operation of the planned central repository for this country in a near future. Such types of residues will be mainly of the medium and high activity classes and have raised concerns on the safety of the operations, the radiological protection of the individuals, the compliance with the legal regulations and their environmental consequences of all kind. In this study, relevant information for the assessment of radiological risk of road transport were taken into account, as the sources and destination of the radioactive transports, the amount of traveling to be done, the preferred routes and populations affected, the characterization of the residues and containers, their corresponding testing, etc. These data were supplied by different organizations fully related with these activities, like the nuclear power stations, the companies in charge of radioactive transports, the enterprises for inspection and control of the activities, etc., as well as the government institutions which are responsible for the selection and location of the storage facility and other decisions on the nuclear policies of the country. Thus, we have developed a program for computing the data in such a form that by entering the radiation levels at one meter of the transport loads and by choosing a particular displacement, the computer application is capable to calculate the corresponding radiological effects, like the global estimated impact, its relevance to the population in general or on those people living and driving near the main road routes, the doses received by the most exposed individuals (e.g. the workers for loading or driving the vehicle), or the probability of detrimental on the human health. The results of this work could be of help for a better understanding and management of these activities and their related impacts; at the same time that the generated reports of the computer application are considered of particular interest as innovative and complementary information to the current legal documentation, which is basically required for transporting radioactive wastes in the country, according with the international safety rules (like IAEA and ADR).Though main studies are still in progress, as the definite location for the Spanish storage facility has not been decided yet, preliminary results with the existing transports of residues of medium activity indicate that the radiological impact is very low in conventional operations. Nevertheless, the management of these transports is complex and laborious, making it convenient to progress further in the analysis and quantification of this kind of events, which constitutes one of the main objectives of the present study for the radioactive road mobility in Spain.

Dynamic analysis of road vehicle-bridge systems under turbulent wind by means of Finite Element Models

When an automobile passes over a bridge dynamic effects are produced in vehicle and structure. In addition, the bridge itself moves when exposed to the wind inducing dynamic effects on the vehicle that have to be considered. The main objective of this work is to understand the influence of the different parameters concerning the vehicle, the bridge, the road roughness or the wind in the comfort and safety of the vehicles when crossing bridges. Non linear finite element models are used for structures and multibody dynamic models are employed for vehicles. The interaction between the vehicle and the bridge is considered by contact methods. Road roughness is described by the power spectral density (PSD) proposed by the ISO 8608. To consider that the profiles under right and left wheels are different but not independent, the hypotheses of homogeneity and isotropy are assumed. To generate the wind velocity history along the road the Sandia method is employed. The global problem is solved by means of the finite element method. First the methodology for modelling the interaction is verified in a benchmark. Following, the case of a vehicle running along a rigid road and subjected to the action of the turbulent wind is analyzed and the road roughness is incorporated in a following step. Finally the flexibility of the bridge is added to the model by making the vehicle run over the structure. The application of this methodology will allow to understand the influence of the different parameters in the comfort and safety of road vehicles crossing wind exposed bridges. Those results will help to recommend measures to make the traffic over bridges more reliable without affecting the structural integrity of the viaduct

A UGV Navigation System for Large Outdoor Environments Including Virtual Obstacles for No-Go Zones

This work presents a navigation system for UGVs in large outdoor environments; virtual obstacles are added to the system in order to avoid zones that may present risks to the UGV or the elements in its surroundings. The platform, software architecture and the modifications necessary to handle the virtual obstacles are explained in detail. Several tests have been performed and their results show that the system proposed is capable of performing safe navigation in complex environments.

Ventilation and FFFS fire tests for “Calle 30” road tunnels

Between 2003 and 2007 an urban network or road tunnels with a total constructed tubes length of 45 km was built in the city of Madrid. This amazing engineering work, known as "Calle 30 Project" counted with different kinds of tunnel typologies and ventilation systems. Due to the length of the tunnels and the impact of the work itself, the tunnels were endowed with a great variety of installations to provide the maximum levels of safety both for users and the infrastructure includieng, in some parts of the tunnel, fixed fire fighting system based on water mist. Whithin this framework a large-scale programme of fire tests was planned to study different aspects related to fire safety in the tunnels including the phenomena of the interaction between ventilation and extinguishing system. In addition, these large scale fire tests allowed fire brigades of the city of Madrid an opportunity to define operational procedures for specific fire fighting in tunnels and evaluate the possibilities of fixed fire fighting systems. The tests were carried out in the Center of Experimentation "San pedro of Anes" which includes a 600 m tunnel with a removable false ceiling for reproducing different ceiling heights and ventilation conditions (transverse and longitudinal ones). Interesting conclusions on the interaction of ventilation and water mist systems were obtained but also on other aspects including performance of water mist system in terms of reduction of gas temperatures or visibility conditions. This paper presents a description of the test's programme carried out and some previous results obtained.

Dynamic behaviour of underspanned suspension road bridges under traffic loads

Underspanned suspension bridges are structures with important economical and aesthetic advantages, due to their high structural efficiency. However, road bridges of this typology are still uncommon because of limited knowledge about this structural system. In particular, there remains some uncertainty over the dynamic behaviour of these bridges, due to their extreme lightness. The vibrations produced by vehicles crossing the viaduct are one of the main concerns. In this work, traffic-induced dynamic effects on this kind of viaduct are addressed by means of vehicle-bridge dynamic interaction models. A finite element method is used for the structure, and multibody dynamic models for the vehicles, while interaction is represented by means of the penalty method. Road roughness is included in this model in such a way that the fact that profiles under left and right tyres are different, but not independent, is taken into account. In addition, free software {PRPgenerator) to generate these profiles is presented in this paper. The structural dynamic sensitivity of underspanned suspension bridges was found to be considerable, as well as the dynamic amplification factors and deck accelerations. It was also found that vehicle speed has a relevant influence on the results. In addition, the impact of bridge deformation on vehicle vibration was addressed, and the effect on the comfort of vehicle users was shown to be negligible.

Analysis of the problems associated with dynamic interaction between train, track and structure at transition zones

El gran desarrollo experimentado por la alta velocidad en los principales países de la Unión Europea, en los últimos 30 años, hace que este campo haya sido y aún sea uno de los principales referentes en lo que a investigación se refiere. Por otra parte, la aparición del concepto super − alta velocidad hace que la investigación en el campo de la ingeniería ferroviaria siga adquiriendo importancia en los principales centros de investigación de los países en los que se desea implantar este modo de transporte, o en los que habiendo sido ya implantado, se pretenda mejorar. Las premisas de eficacia, eficiencia, seguridad y confort, que este medio de transporte tiene como razón de ser pueden verse comprometidas por diversos factores. Las zonas de transición, definidas en la ingeniería ferroviaria como aquellas secciones en las que se produce un cambio en las condiciones de soporte de la vía, pueden afectar al normal comportamiento para el que fue diseñada la infraestructura, comprometiendo seriamente los estándares de eficiencia en el tiempo de viaje, confort de los pasajeros y aumentando considerablemente los costes de mantenimiento de la vía, si no se toman las medidas oportunas. En esta tesis se realiza un estudio detallado de la zonas de transición, concretamente de aquellas en las que existe una cambio en la rigidez vertical de la vía debido a la presencia de un marco hidráulico. Para realizar dicho estudio se lleva a cabo un análisis numérico de interacción entre el vehículo y la estructura, con un modelo bidimensional de elemento finitos, calibrado experimentalmente, en estado de tensión plana. En este análisis se tiene en cuenta el efecto de las irregularidades de la vía y el comportamiento mecánico de la interfaz suelo-estructura, con el objetivo de reproducir de la forma más real posible el efecto de interacción entre el vehículo, la vía y la estructura. Otros efectos como la influencia de la velocidad del tren y los asientos diferenciales, debidos a deformaciones por consolidación de los terraplenes a ambos lados el marco hidráulico, son también analizados en este trabajo. En esta tesis, los cálculos de interacción se han llevado a cabo en dos fases diferentes. En la primera, se ha considerado una interacción sencilla debida al paso de un bogie de un tren Eurostar. Los cálculos derivados de esta fase se han denominado cálculos a corto plazo. En la segunda, se ha realizado un análisis considerando múltiples pasos de bogie del tren Eurostar, conformando un análisis de degradación en el que se tiene en cuenta, en cada ciclo, la deformación de la capa de balasto. Los cálculos derivados de esta fase, son denominados en el texto como cálculos a largo plazo. Los resultados analizados muestran que la utilización de los denominados elementos de contacto es fundamental cuando se desea estudiar la influencia de asientos diferenciales, especialmente en transiciones terraplén-estructura en las que la cuña de cimentación no llega hasta la base de cimentación de la estructura. Por otra parte, tener en cuenta los asientos del terraplén, es sumamente importante, cuando se desea realizar un análisis de degradación de la vía ya que su influencia en la interacción entre el vehículo y la vía es muy elevada, especialmente para valores altos de velocidad del tren. En cuanto a la influencia de las irregularidades de la vía, en los cálculos efectuados, se revela que su importancia es muy notable, siendo su influencia muy destacada cuanto mayor sea la velocidad del tren. En este punto cabe destacar la diferencia de resultados derivada de la consideración de perfiles de irregularidades de distinta naturaleza. Los resultados provenientes de considerar perfiles artificiales son en general muy elevados, siendo estos más apropiados para realizar estudios de otra índole, como por ejemplo de seguridad al descarrilamiento. Los resultados provenientes de perfiles reales, dados por diferentes Administradores ferroviarios, presentan resultados menos elevados y más propios del problema analizar. Su influencia en la interacción dinámica entre el vehículo y la vía es muy importante, especialmente para velocidades elevadas del tren. Además el fenómeno de degradación conocido como danza de traviesas, asociado a zonas de transición, es muy susceptible a la consideración de irregularidades de la vía, tal y como se desprende de los cálculos efectuados a largo plazo. The major development experienced by high speed in the main countries of the European Union, in the last 30 years, makes railway research one of the main references in the research field. It should also be mentioned that the emergence of the concept superhigh − speed makes research in the field of Railway Engineering continues to gain importance in major research centers in the countries in which this mode of transportation is already implemented or planned to be implemented. The characteristics that this transport has as rationale such as: effectiveness, efficiency, safety and comfort, may be compromised by several factors. The transition zones are defined in railway engineering as a region in which there is an abrupt change of track stiffness. This stiffness variation can affect the normal behavior for which the infrastructure has been designed, seriously compromising efficiency standards in the travel time, passenger comfort and significantly increasing the costs of track maintenance, if appropriate measures are not taken. In this thesis a detailed study of the transition zones has been performed, particularly of those in which there is a change in vertical stiffness of the track due to the presence of a reinforced concrete culvert. To perform such a study a numerical interaction analysis between the vehicle, the track and the structure has been developed. With this purpose a two-dimensional finite element model, experimentally calibrated, in a state of plane stress, has been used. The implemented numerical models have considered the effects of track irregularities and mechanical behavior of soil-structure interface, with the objective of reproducing as accurately as possible the dynamic interaction between the vehicle the track and the structure. Other effects such as the influence of train speed and differential settlement, due to secondary consolidation of the embankments on both sides of culvert, have also been analyzed. In this work, the interaction analysis has been carried out in two different phases. In the first part a simple interaction due to the passage of a bogie of a Eurostar train has been considered. Calculations derived from this phase have been named short-term analysis. In the second part, a multi-load assessment considering an Eurostar train bogie moving along the transition zone, has been performed. The objective here is to simulate a degradation process in which vertical deformation of the ballast layer was considered. Calculations derived from this phase have been named long-term analysis. The analyzed results show that the use of so-called contact elements is essential when one wants to analyze the influence of differential settlements, especially in embankment-structure transitions in which the wedge-shaped backfill does not reach the foundation base of the structure. Moreover, considering embankment settlement is extremely important when it is desired to perform an analysis of track degradation. In these cases the influence on the interaction behaviour between the vehicle and the track is very high, especially for higher values of speed train. Regarding the influence of the track irregularities, this study has proven that the track’s dynamic response is heavily influenced by the irregularity profile and that this influence is more important for higher train velocities. It should also be noted that the difference in results derived from consideration of irregularities profiles of different nature. The results coming from artificial profiles are generally very high, these might be more appropriate in order to study other effects, such as derailment safety. Results from real profiles, given by the monitoring works of different rail Managers, are softer and they fit better to the context of this thesis. The influence of irregularity profiles on the dynamic interaction between the train and the track is very important, especially for high-speeds of the train. Furthermore, the degradation phenomenon known as hanging sleepers, associated with transition zones, is very susceptible to the consideration of track irregularities, as it can be concluded from the long-term analysis.

Road to 1966 : caminos hacia "complejidad y contradicción en la arquitectura", en la cultura arquitectónica de la segunda posguerra en EE.UU

Complejidad y contradicción en la arquitectura ha resultado ser una de las referencias capitales más aludidas, citadas y reproducidas de la literatura arquitectónica de los tiempos recientes. No en vano, en la introducción de la propia obra, Vincent Scully afirmó que «probablemente es el texto más importante sobre arquitectura desde ‘Vers une Architecture’, escrito por Le Corbusier en 1923». Sin embargo, sus fuentes parece que están inexploradas o, al menos, no examinadas. Por ello, Road to 1966 se plantea como un trabajo de investigación con tres objetivos de partida fundamentales: (1) el interés en estudiar el debate arquitectónico candente, creado con las fricciones surgidas entre los protagonistas de unos años que cambiaron el estado de lo que se consideraba una obra legítima en arquitectura; (2) se pretende ampliar la cronología del desarrollo intelectual de un texto, el de Venturi, que marcó la segunda mitad del siglo xx, de manera retroactiva hasta los años de la II Guerra Mundial, cuando parece que empezaban a ser coherentes y reconocibles unas nuevas posiciones desde las que aproximarse a las cuestiones de la práctica, la teoría y la historia de la arquitectura; (3) poder ofrecer una nueva interpretación de dicho texto de Venturi, entendido no como el origen primigenio de parte de las grandes transformaciones de la arquitectura reciente (de los últimos cincuenta años), sino como el resultado necesario de esa cronología intelectual previa. La arquitectura norteamericana de estos años de posguerra ha resultado ser crucial en su posterior desarrollo, y, especialmente, en relación al libro de Venturi. De hecho, Scully en la introducción de la edición original de Complejidad y contradicción, señalaba que «el principal argumento del libro está expuesto a finales de los cincuenta». Que la arquitectura del siglo xx tiene en la Norteamérica de los años sesenta -cuando se consolida la figura de Venturi- uno de sus capítulos más decisivos, frecuentemente asumido como el paso siguiente a la importada modernidad heroica europea, hoy parece no ser discutido por casi nadie. Ahora bien: ¿qué ocurre con los años intermedios? ¿Qué acontece entre el final de la II Guerra Mundial y esos años sesenta? La posible carencia de una postura dominante y clara quizás haya sumido esta etapa en un cierto olvido o descuido por parte de historiadores y críticos. Así, este trabajo se estructura alrededor del papel que ocupa el texto venturiano, sin ser éste su único protagonista. Tomado más bien como excusa, la tesis va profundizando de manera deductiva en el conjunto de circunstancias que pudieron llevar a su autor hacia las conclusiones que desarrolló, detectando los ambientes biográficos y formativos, pensamientos compartidos e influencias epistemológicas y profesionales mutuas, que justificarían una novedosa interpretación de dicho texto como el corolario necesario de un panorama de crisis y cambios - éste sí protagonista en este trabajo-, al contrario de cómo habitualmente se ha venido entendiendo dicha obra. La investigación se centra predominantemente en el rastreo de las fuentes citadas por el propio Venturi en su libro, así como de los textos de mayor difusión (generalmente revistas profesionales no exclusivamente académicas, además de libros, catálogos de exposiciones, actas de simposios…), y no tanto en las obras construidas o proyectadas; sí, quizás, en los términos en los que dichas obras fueron publicadas, comentadas o reseñadas. Así, se ha adoptado una aproximación concebida sub specie bibliotecae, donde se han aplicado unos métodos de trabajo caracterizados por su componente cronológica, y, después, analítico-comparativa: dicho de otro modo, un método historiográfico-periodístico capaz de relacionar las historias o cursos de ciertas ideas o nociones, dentro de un contexto general más amplio en sus derivadas arquitectónicas, estéticas, socio-generacionales, culturales, filosóficas, científicas, políticas, literarias… Con ello, se pretende establecer una relectura del primer libro de Venturi y sus años de gestación desde unas nuevas concepciones, más modernas que postmodern(ist)as, proponiendo una posible evolución en la arquitectura más reciente cuyas raíces, a fin de cuentas, tendrían su origen en la Norteamérica de 1946 a 1966. ABSTRACT Complexity and Contradiction in Architecture has proved to be one of the capital, alluded references cited and reproduced in the architectural literature of the recent times. Not surprisingly, in the Introduction to the book, Vincent Scully wrote that "yet it is probably the most important writing on the making of architecture since Le Corbusier´s ‘Vers une Architecture’, of 1923". However, its sources seem to be unexplored or at least not examined. Therefore, Road to 1966 is presented as a research with three fundamental starting objectives: (1) first, the interest in studying the burning architectural debate, created within the arising frictions among the protagonists of the years that changed the status of what was considered a legitimate work in architecture; (2) second, it seeks to extend the chronology of the intellectual background of the book written by Venturi, which marked the second half of the twentieth century, in a retroactive manner to the years of the World War II, when it seems that some new positions from which to approach the issues of practice, theory and history of architecture began to be consistent and recognizable; (3) lastly, to offer a new interpretation of Venturi’s text, now understood not as the primal source of the great transformations of the recent architecture (of the last fifty years), but as the necessary result of that background intellectual chronology. The American architecture of these post-war years has proved to be crucial in its later stages, and especially in relation to the book of Robert Venturi. In fact, Scully in the Introduction to the first edition of Complexity and Contradiction, noted that "the major argument of this book was laid out in the late fifties". The fact that the architecture of the twentieth century –when the leading figure of Venturi was consolidated- has in the North America of the sixties one of its most decisive chapters, (often assumed as the next step to the imported European heroic modernism) today seems to be discussed by almost anyone. Now, what about the intervening years? What happens between the end of the World War II and the sixties? The potential lack of a clear dominant position of this stage may have plunged it into oblivion or oversight by historians and critics. Thus, this research is structured around the role that occupies Venturi’s work, whereas this is not its only subject. Rather taken as an excuse, the thesis deepens deductively in the set of circumstances that could lead its author to the conclusions he developed in 1966, detecting biographical and academic environments, shared thoughts and epistemological and mutual professional influences, that would justify a new interpretation of this book as a necessary corollary of an outlook of crisis and change (this major and center subject in this dissertation), contrary to what has been commonly understood upon this work. The research focuses predominantly on tracing the sources cited by Venturi himself in his book, as well as other texts of wider dissemination and outreach (usually professional journals not exclusively academic, as well as books, catalogs of exhibitions, symposia proceedings...), and not so much in the buildings or unbuilt projects; but also, perhaps, it is focused in the terms in which these works were published, commented or reviewed. Hence an approach conceived sub specie bibliotecae has been adopted, with working methods characterized by their chronological component, and then the analytical-comparative one: in other words, a historiographicaljournalistic method able to relate stories or courses of certain ideas or notions, within a broader general context in its architectural, aesthetic, sociological-generational, cultural, philosophical, scientific, political, literary... sides. This approach intends to establish a re-reading of Venturi’s first book and its years of gestation, from some new understandings, more modern than postmodern(ist), proposing a possible evolution of the latest architecture whose roots, after all, would have their origin in the North America of 1946-1966.

Use of phosphorous mapping and sea-level change data in assessing coastal activity zones and establishing site chronology : A case study from the Icelandic multi-period site of Vatnsfjörður

This paper forms part of Lukasz Mikolajczyk's PhD dissertation, which is supervised by Karen Milek

Delineating zones to increase geographical detail in individual response data files: An application to the Spanish 2011 Census of population

Due to confidentiality considerations, the microdata available from the 2011 Spanish Census have been codified at a provincial (NUTS 3) level except when the municipal (LAU 2) population exceeds 20,000 inhabitants (a requirement that is met by less than 5% of all municipalities). For the remainder of the municipalities within a given province, information is only provided for their classification in wide population intervals. These limitations, hampering territorially-focused socio-economic analyses, and more specifically, those related to the labour market, are observed in many other countries. This article proposes and demonstrates an automatic procedure aimed at delineating a set of areas that meet such population requirements and that may be used to re-codify the geographic reference in these cases, thereby increasing the territorial detail at which individual information is available. The method aggregates municipalities into clusters based on the optimisation of a relevant objective function subject to a number of statistical constraints, and is implemented using evolutionary computation techniques. Clusters are defined to fit outer boundaries at the level of labour market areas.