Comparing the performance of hyperbolic and circular rod quadrupole mass spectrometers with applied higher order auxiliary excitation

This work applies higher order auxiliary excitation techniques to two types of quadrupole mass spectrometers (QMSs): commercial systems and spaceborne instruments. The operational settings of a circular rod geometry commercial system and an engineering test-bed for a hyperbolic rod geometry spaceborne instrument were matched, with the relative performance of each sensor characterized with and without applied excitation using isotopic measurements of Kr+. Each instrument was operated at the limit of the test electronics to determine the effect of auxiliary excitation on extending instrument capabilities. For the circular rod sensor, with applied excitation, a doubling of the mass resolution at 1% of peak transmission resulted from the elimination of the low-mass side peak tail typical of such rod geometries. The mass peak stability and ion rejection efficiency were also increased by factors of 2 and 10, respectively, with voltage scan lines passing through the center of stability islands formed from auxiliary excitation. Auxiliary excitation also resulted in factors of 6 and 2 in peak stability and ion rejection efficiency, respectively, for the hyperbolic rod sensor. These results not only have significant implications for the use of circular rod quadrupoles with applied excitation as a suitable replacement for traditional hyperbolic rod sensors, but also for extending the capabilities of existing hyperbolic rod QMSs for the next generation of spaceborne instruments and low-mass commercial systems.

Optimizing Performance of Conductive Nanoparticle-filled Membranes

Conductive membranes were prepared by magnetic alignment of graphite-coated iron nanoparticles (GCINs) in a polyisobutylene (PIB) matrix, which was cast onto an interdigitated surface electrode. Toluene and tetrahydrofuran (THF) were used as solvents for the casting solution. Different molecular weights of PIB and solutions with concentrations ranging from 0.05- to 50-wt% were explored to optimize the mechanical and physical properties of the membrane. The amount of GCINs used in the membranes ranged from 0.1- to 2.5-wt%, and a sonicator was used to disperse the particles in the membrane. Sedimentation and surfactant studies were conducted to investigate the dispersion of GCINs in solutions. Progresses were made to find an optimal combination of various parameters in order to attain thin homogenous membranes for fast response.

Proceedings of the 13th Annual Biochemical Engineering Symposium

The symposium reported here was the thirteenth of a series devoted to talks by students on their biochemical engineering research. The first, third, fifth, ninth, and twelfth were at Kansas State University, the second and fourth were at the University of Nebraska–Lincoln, the sixth was in Kansas City and was hosted by Iowa State University, the seventh and tenth were at Iowa State, and the eighth and eleventh were at the University of Missouri–Columbia and Colorado State University, respectively. All symposia have been followed by proceedings edited by faculty of the host institution. Because final publication usually takes place elsewhere, papers here are brief, and often cover research in progress. ContentSequential Utilization of Mixed Sugars by Clostridium acetobutylicum, B. Hong, N. H. Choi, and L. T. Fan, Kansas State University The Effects of Dilution Rate on the Kinetics. of Anaerobic Acidogenesis, C. J. Huang, Colorado State University Ethanol Production by Zymomonas mobilis in Anaerobic Glucose-Limited Culture: A Yield Study, Mehmet D. Oner, Kansas State University Hydrolysis of Cellulosics by Enterobacteria, Michael R. Sierks, Iowa State University The Cellulase System of Chaetomium cellulolyticum, Nikhil Mehta, Colorado State University DNA Measurement as a Tool for Estimating Biomass Concentration in the Presence of Interfering Solids, Bamidele 0. Solomon, Kansas State University The Effect of Cellulose Crystallinity on Enzymatic Hydrolysis, Maria S. Bertran, Colorado State University High Performance Liquid Chromatography of Di- and Trisaccharides, Michael M. Meagher, Iowa State University Dynamics of Bubble Size .Distributions in Air-Lift Fermentors, c. H. Lee and Snehal A. Patel, Kansas State University A Thermal Coagulation Study of Alfalfa Leaf Proteins by Differential Scanning Calorimeter, Khalif Ahmed and Bruce Dale, Colorado State University Thermodynamic Efficiency of Photoautotrophic Growth, Hyeon Y. Lee, Kansas State University

Proceedings of the Fifteenth Annual biochemical Engineering Symposium

This work represents the proceedings of the fifteenth symposium which convened at Colorado State University on May 24, 1985. The two day meeting was scheduled one month later than usual, i.e., after the spring semester, so that travelers from the Midwest (Iowa State University, Kansas State University and University of Missouri) could enjoy the unique mountain setting provided at Pingree Park. The background of the photograph on the cover depicts the beauty of the area. ContentsGreg Sinton and S.M. Leo, KSU. Models for the Biodegration of 2.4-D and Related Xenobiotic Compounds. V. Bringi, CSU. Intrinsic Kinetics from a Novel Immobilized Cell CSTR. Steve Birdsell, CU. Novel Microbial Separation Techniques. Mark Smith, MU. Kinetic Characterization of Growth of E. coli on Glucose. Michael M. Meagher, ISU. Kinetic Parameters of Di- and Trisaccharaide Hydrolysis by Glucoamylase II. G.T. Jones and A.K. Ghosh Hajra, KSU. Modeling and Simulation of Legume Modules with Reactive Cores and Inert Shells. S.A. Patel and C.H. Lee, KSU. Energetic Analysis and Liquid Circulation in an Airlift Fermenter. Rod R. Fisher, ISU. The Effects of Mixing during Acid Addition of Fractionally Precipitated Protein. Mark M. Paige, CSU. Fed-batch Fermentations of Clostridium acetobutylicum. Michael K. Dowd, ISU. A Nonequilibirium Thermodynamic Description of the Variation of Contractile Velocity and Energy Use in Muscle. David D. Drury, CSU. Analysis of Hollow Fiber Bioreactor Performance for MAmmalian Cells by On-Line MMR. H.Y. Lee, KSU. Process Analysis of Photosynthetic Continuous Culture Systems. C.J. Wang, MU. Kinetic Consideration in Fermentation of Cheese Whey to Ethanol.

Proceedings of the Twentieth Annual Biochemical Engineering Symposium

The 20th Annual Biochemical Engineering Symposium was held at Kansas State University on April 21,1990. The objectives of the symposium were to provide: (i) a forum for informal discussion of biochemical engineering research being conducted at the participating institutions and (ii) an opportunity for students to present and publish their work. Twenty-eight papers presented at the symposium are included in this proceedings. Some of the papers describe the progress of ongoing projects, and others contain the results of completed projects. Only brief summaries are given of the papers that will be published in full elsewhere. The program of the symposium and a list of the participants are included in the proceedings. ContentsCell Separations and Recycle Using an Inclined Settler, Ching-Yuan Lee, Robert H. Davis and Robert A. Sclafani Micromixing and Metabolism in Bioreactors: Characterization of a 14 L Fermenter, K.S. Wenger and E.H. Dunlop Production, Purification, and Hydrolysis Kinetics of Wild-Type and Mutant Glucoamylases from Aspergillus Awamori, Ufuk Bakir, Paul D. Oates, Hsiu-Mei Chen and Peter J. Reilly Dynamic Modeling of the Immune System, Barry Vant-Hull and Dhinakar S. Kompala Dynamic Modeling of Active Transport Across a Biological Cell: A Stochastic Approach, B.C. Shen, S.T. Chou, Y.Y. Chiu and L.T. Fan Electrokinetic Isolation of Bacterial Vesicles and Ribosomes, Debra T.L. Hawker, Robert H. Davis, Paul W. Todd, and Robert Lawson Application of Dynamic Programming for Fermentative Ethanol Production by Zymomonas mobilis, Sheyla L. Rivera and M. Nazmul Karim Biodegradation of PCP by Pseudomonas cepacia, R. Rayavarapu, S.K. Banerji, and R.K. Bajpai Modeling the Bioremediation of Contaminated Soil Aggregates: a Phenomenological Approach, S. Dhawan, L.E. Erickson and L.T. Fan Biospecific Adsorption of Glucoamylase-I from Aspergillus niger on Raw Starch, Bipin K. Dalmia and Zivko L. Nikolov Overexpression in Recombinant Mammalian Cells: Effect on Growth Rate and Genetic Instability, Jeffrey A. Kern and Dhinakar S. Kompala Structured Mathematical Modeling of Xylose Fermentation, A.K. Hilaly, M.N. Karim, I. C. Linden and S. Lastick A New Culture Medium for Carbon-limited Growth of Bacillus thuringiensis, W. -M. Liu and R.K. Bajpai Determination of Sugars and Sugar Alcohols by High Performance Ion Chromatography, T. J. Paskach, H.-P. Lieker, P.J. Reilly, and K. Thielecke Characterization of Poly-Asp Tailed B-Galactosidase, M.Q. Niederauer, C.E. Glatz, l.A. Suominen, C.F. Ford, and M.A. Rougvie Computation of Conformations and Energies of cr-Glucosyl Disaccharides, Jing Zepg, Michael K. Dowd, and Peter J. Reilly Pentachlorophenol Interactions with Soil, Shein-Ming Wei, Shankha K. Banerji, and Rakesh K. Bajpai Oxygen Transfer to Viscous Liquid Media in Three-Phase Fluidized Beds of Floating Bubble Freakers, Y. Kang, L.T. Fan, B.T. Min and S.D. Kim Studies on the Invitro Development of Chick Embryo, A. Venkatraman and T. Panda The Evolution of a Silicone Based Phase-Separated Gravity-Independent Bioreactor, Peter E. Villeneuve and Eric H. Dunlop Biodegradation of Diethyl Phthalate, Guorong Zhang, Kenneth F. Reardon and Vincent G. Murphy Microcosm Treatability of Soil Contaminated with Petroleum Hydrocarbons, P. Tuitemwong, S. Dhawan, B.M. Sly, L.E. Erickson and J.R. Schlup

Hydraulic Performance of the Denitrification Bioreactor

Denitrification bioreactors, also known as woodchip bioreactors, are a new strategy for improving drainage water quality before these flows arrive at local streams, rivers, and lakes. A bioreactor is an excavated, woodchip-filled pit that is capable of supporting native microbes that convert nitrate in the drainage water to nitrogen gas. The idea of these edgeof-field treatment systems is still relatively new, meaning it is important for investigations to be made into how to design these “pits” and to determine how drainage water moves through the woodchips. Because the bioreactor at the ISU Northeast Research Farm (NERF) is one of the best monitored bioreactor sites in the state, it provided an ideal location to not only monitor bioreactor nitrate-reduction performance, but also to investigate design hydraulics.

La performance teatral de las máquinas maravillosas : Configuraciones ambivalentes de la técnica y el teatro en los siglos XVI y XVII

El artículo explora las formas de representación y a la dimensión epistemológica de la máquina en el campo discursivo de los siglos XVI y XVII, cuando todavía no existe una diferencia fundamental entre los discursos científicos, paracientíficos, filosóficos y estéticos. A partir de las investigaciones de Jan Lazardzig, analiza el carácter paradójico de la ingeniería mecánica entre la funcionalidad y la admiración, la racionalidad y lo maravilloso dentro del contexto español en el Siglo de Oro. En este sentido, el artículo examina las formas de performance teatral de la máquina como objeto admirable y maravilloso: por un lado en el teatro de máquinas cortesano y por el otro en los libros de máquinas en la tradición del Theatrum machinarum. Analizamos así los paralelismos y las diferencias respecto a sus estructuras, sus modos de representación y sus dimensiones pragmáticas.

La performance teatral de las máquinas maravillosas : Configuraciones ambivalentes de la técnica y el teatro en los siglos XVI y XVII

El artículo explora las formas de representación y a la dimensión epistemológica de la máquina en el campo discursivo de los siglos XVI y XVII, cuando todavía no existe una diferencia fundamental entre los discursos científicos, paracientíficos, filosóficos y estéticos. A partir de las investigaciones de Jan Lazardzig, analiza el carácter paradójico de la ingeniería mecánica entre la funcionalidad y la admiración, la racionalidad y lo maravilloso dentro del contexto español en el Siglo de Oro. En este sentido, el artículo examina las formas de performance teatral de la máquina como objeto admirable y maravilloso: por un lado en el teatro de máquinas cortesano y por el otro en los libros de máquinas en la tradición del Theatrum machinarum. Analizamos así los paralelismos y las diferencias respecto a sus estructuras, sus modos de representación y sus dimensiones pragmáticas.

La performance teatral de las máquinas maravillosas : Configuraciones ambivalentes de la técnica y el teatro en los siglos XVI y XVII

El artículo explora las formas de representación y a la dimensión epistemológica de la máquina en el campo discursivo de los siglos XVI y XVII, cuando todavía no existe una diferencia fundamental entre los discursos científicos, paracientíficos, filosóficos y estéticos. A partir de las investigaciones de Jan Lazardzig, analiza el carácter paradójico de la ingeniería mecánica entre la funcionalidad y la admiración, la racionalidad y lo maravilloso dentro del contexto español en el Siglo de Oro. En este sentido, el artículo examina las formas de performance teatral de la máquina como objeto admirable y maravilloso: por un lado en el teatro de máquinas cortesano y por el otro en los libros de máquinas en la tradición del Theatrum machinarum. Analizamos así los paralelismos y las diferencias respecto a sus estructuras, sus modos de representación y sus dimensiones pragmáticas.

First steps in the discovery of patterns in the academic results of telecommunication engineering students in the subjects Analysis of Circuits and Mathematics

In this paper, the results of six years of research in engineering education, in the application of the European Higher Education Area (EHEA) to improve the performance of the students in the subject Analysis of Circuits of Telecommunication Engineering, are analysed taking into consideration the fact that there would be hidden variables that both separate students into subgroups and show the connection among several basic subjects such as Analysis of Circuits (AC) and Mathematics (Math). The discovery of these variables would help us to explain the characteristics of the students through the teaching and learning methodology, and would show that there are some characteristics that instructors do not take into account but that are of paramount importance

Neutron performance analysis for ESS target proposal

In the course of discussing different target types for their suitability in the European Spallation Source (ESS) one main focus was on neutronics' performance. Diverse concepts have been assessed baselining some preliminary engineering and geometrical details and including some optimization. With the restrictions and resulting uncertainty imposed by the lack of detailed designs optimizations at the time of compiling this paper, the conclusion drawn is basically that there is a little difference in the neutronic yield of the investigated targets. Other criteria like safety, environmental compatibility, reliability and cost will thus dominate the choice of an ESS target.

Pounding force assessment in performance-based design of bridges

Bridges with deck supported on either sliding or elastomeric bearings are very common in mid-seismicity regions. Their main seismic vulnerabilities are related to the pounding of the deck against abutments or between the different deck elements. A simplified model of the longitudinal behavior of those bridges will allow to characterize the reaction forces developed during pounding using the Pacific Earthquake Engineering Research Center framework formula. In order to ensure the general applicability of the results obtained, a large number of system parameter combinations will be considered. The heart of the formula is the identification of suitable intermediate variables. First, the pseudo acceleration spectral value for the fundamental period of the system (Sa(Ts)) will be used as an intensity measure (IM). This IM will result in a very large non-explained variability of the engineering demand parameter. A portion of this variability will be proved to be related to the relative content of high-frequency energy in the input motion. Two vector-valued IMs including a second parameter taking this energy content into account will then be considered. For both of them, a suitable form for the conditional intensity dependence of the response will be obtained. The question of which one to choose will also be analyzed. Finally, additional issues related to the IM will be studied: its applicability to pulse-type records, the validity of scaling records and the sufficiency of the IM.

Strengthening communication skills in an innovative context of engineering project management learning

This document presents an innovative, formal educational initiative that is aimed at enhancing the development of engineering students’ specific competences when studying Project Management (PM) subject. The framework of the experience combines (1) theoretical concepts, (2) the development of a real-case project carried out by multidisciplinary groups of three different universities, (3) the use of software web 2.0 tools and (4) group and individual assignments of students that play different roles (project managers and team members). Under this scenario, the study focuses on monitoring the communication competence in the ever growing PM virtual environment. Factors such as corporal language, technical means, stage, and PM specific vocabulary among others have been considered in order to assess the students’ performance on this issue. As a main contribution, the paper introduces an ad-hoc rubric that, based on previous investigations, has been adapted and tested for the first time to this new and specific context. Additionally, the research conducted has provided some interesting findings that suggest further actions to improve and better define future rubrics, oriented to communication or even other competences. As specific PM subject concerns, it has been detected that students playing the role of Project Managers strengthen their competences more than those ones that play the role of Team Members. It has also been detected that students have more difficulty assimilating concepts related to risk and quality management. However those concepts related with scope, time or cost areas of knowledge have been better assimilated by the students.

Ontology driven description and engineering of autonomous systems: application to process system engineering

Autonomous systems refer to systems capable of operating in a real world environment without any form of external control for extended periods of time. Autonomy is a desired goal for every system as it improves its performance, safety and profit. Ontologies are a way to conceptualize the knowledge of a specific domain. In this paper an ontology for the description of autonomous systems as well as for its development (engineering) is presented and applied to a process. This ontology is intended to be applied and used to generate final applications following a model driven methodology.