Production and Characterization of Lignin Peroxidases from Mangrove Ascomycetes

The continually growing worldwide hazardous waste problem is receiving much attention lately. The development of cost effective, yet efficient methods of decontamination are vital to our success in solving this problem.Bioremediation using white rot fungi, a group of basidiomycetes characterized by their ability to degrade lignin by producing extracellular LiP, MnP and laccase have come to be recognized globally which is described in detail in Chapter 1.These features provide them with tremendous advantages over other micro-organisms.Chapter 2 deals with the isolation and screening of lignin degrading enzyme producing micoro-organisms from mangrove area. Marine microbes of mangrove area has great capacity to tolerate wide fluctuations of salinitie.Primary and secondary screening for lignin degrading enzyme producing halophilic microbes from mangrove area resulted in the selection of two fungal strains from among 75 bacteria and 26 fungi. The two fungi, SIP 10 and SIP ll, were identified as penicillium sp and Aspergillus sp respectively belonging to the class Ascomycetes .Specific activity of the purified LiP was 7923 U/mg protein. The purification fold was 24.07 while the yield was 18.7%. SDS PAGE of LiP showed that it was a low molecular weight protein of 29 kDa.Zymogram analysis using crystal violet dye as substrate confirmed the peroxidase nature of the purified LiP.The studies on the ability of purified LiP to decolorize different synthetic dyes was done. Among the dyes studied, crystal violet, a triphenyl methane dye was decolorized to the greatest extent.

Performance Analysis of Reversible Fast Decimal Adders

This paper presents a performance analysis of reversible, fault tolerant VLSI implementations of carry select and hybrid decimal adders suitable for multi-digit BCD addition. The designs enable partial parallel processing of all digits that perform high-speed addition in decimal domain. When the number of digits is more than 25 the hybrid decimal adder can operate 5 times faster than conventional decimal adder using classical logic gates. The speed up factor of hybrid adder increases above 10 when the number of decimal digits is more than 25 for reversible logic implementation. Such highspeed decimal adders find applications in real time processors and internet-based applications. The implementations use only reversible conservative Fredkin gates, which make it suitable for VLSI circuits.

Implementació d’un sistema xat multiprotocol fent servir el llenguatge de programació ERLANG

Construcció d’una aplicació amb un llenguatge de programació concurrent i distribuït anomenat Erlang. Erlang és un llenguatge de programació funcional amb avaluació estricta, és a dir, assignació única i que inclou una màquina virtual. L’aplicació desenvolupada ha estat la programació d’un xat multiprotocol, el qual s’ha realitzat una primera part que ha consistit en el construcció d’un servidor per la xarxa local i el seu corresponent client. Llavors per poder fer un client més funcional i útil s’ha implementat un altre protocol, IRC. Al tractar-se d’un llenguatge espacialment dissenyat per treballar en processos s’ha intentat dissenyar d’una manera la qual es pugés aprofitar aquesta qualitat

Utilidad de las relaciones estratégicas comunitarias y el marketing en la administración de negocios con clientes corporativos

Este trabajo de grado propone identificar la utilidad de las relaciones estratégicas comunitarias y el marketing en la administración de negocios con clientes corporativos, también se toman en cuenta conceptos como el marketing organizacional y relacional, estos conceptos ayudan en la investigación a determinar relaciones estratégicas entre las empresas, y el beneficio que estas le generan a las corporaciones; para así fomentar la implementación de estas estrategias en a las empresas a nivel nacional e internacional, así mismo, identificar el concepto de comunidad que tienen los clientes corporativos y como este concepto se puede adaptar al entorno que los rodea. Con el fin de entender las funciones y características de un cliente corporativo, así como su comportamiento, los objetivos específicos de la investigación son describir las estrategias de marketing en la administración de negocios con clientes corporativos, determinar si existe el concepto de comunidad en la administración de negocios con clientes corporativos y determinar si se utilizan relaciones estratégicas comunitarias en la administración de negocios con clientes corporativos. La metodología que se planteó usar fue teórica-conceptual, teniendo en cuenta el marketing y las relaciones estratégicas comunitarias de los clientes corporativos. Llevando la investigación al ámbito de la gerencia y dirección, los resultados que se obtuvieron gracias a la investigación, ayudaran a potenciar la dirección de las empresas, donde se evalué la verdadera utilidad de las estrategias basadas en las relaciones comunitarias y marketing en los negocios con clientes corporativos. Las estrategias comunitarias y el marketing influencian de manera directa las relaciones de las compañias con sus clientes corporativos, debido a que marketing nos permite extender la relación y generar una utilidad a futuro entre ambas partes. De la investigación se concluye que las empresas que logran crear estrategias comunitarias y relaciones estrechas entre ellas, tienden a tener mejores utilidades en el largo plazo y ser empresas más sostenibles.

Student's watcher : comparison between ASP.NET and PHP+CSS

"Student’s Watcher” is a small Web application which wants to show in a visual, simple and fast way, the evolution of the students. The main project table displays such things as marks and comments about students. We can add a comment for each mark to explain why this mark. The objective is to be able to know if some student has a problem, how is going his year, marks in other courses, or even, to know if he has a bad week in a different subjects. We can see the evolution of students in past years to do an objective comparison. It also allows inserting global comments of student, we have a list of these, and all professors can add new ones, where we can see more general valuations. “Student’s Watcher” was begun in ASP.net, but finally my project would be developed in PHP, HTML and CSS. This project wants to be a comparison between two of most important languages used nowadays, ASPX and PHP

Integration of knowledge-based, qualitative and numeric tools for real time dynamic systems supervision

The proposal presented in this thesis is to provide designers of knowledge based supervisory systems of dynamic systems with a framework to facilitate their tasks avoiding interface problems among tools, data flow and management. The approach is thought to be useful to both control and process engineers in assisting their tasks. The use of AI technologies to diagnose and perform control loops and, of course, assist process supervisory tasks such as fault detection and diagnose, are in the scope of this work. Special effort has been put in integration of tools for assisting expert supervisory systems design. With this aim the experience of Computer Aided Control Systems Design (CACSD) frameworks have been analysed and used to design a Computer Aided Supervisory Systems (CASSD) framework. In this sense, some basic facilities are required to be available in this proposed framework: ·

Information servers, present and future

Mainframes, corporate and central servers are becoming information servers. The requirement for more powerful information servers is the best opportunity to exploit the potential of parallelism. ICL recognized the opportunity of the 'knowledge spectrum' namely to convert raw data into information and then into high grade knowledge. Parallel Processing and Data Management Its response to this and to the underlying search problems was to introduce the CAFS retrieval engine. The CAFS product demonstrates that it is possible to move functionality within an established architecture, introduce a different technology mix and exploit parallelism to achieve radically new levels of performance. CAFS also demonstrates the benefit of achieving this transparently behind existing interfaces. ICL is now working with Bull and Siemens to develop the information servers of the future by exploiting new technologies as available. The objective of the joint Esprit II European Declarative System project is to develop a smoothly scalable, highly parallel computer system, EDS. EDS will in the main be an SQL server and an information server. It will support the many data-intensive applications which the companies foresee; it will also support application-intensive and logic-intensive systems.

Synthesis of a systolic array genetic algorithm

The paper presents a design for a hardware genetic algorithm which uses a pipeline of systolic arrays. These arrays have been designed using systolic synthesis techniques which involve expressing the algorithm as a set of uniform recurrence relations. The final design divorces the fitness function evaluation from the hardware and can process chromosomes of different lengths, giving the design a generic quality. The paper demonstrates the design methodology by progressively re-writing a simple genetic algorithm, expressed in C code, into a form from which systolic structures can be deduced. This paper extends previous work by introducing a simplification to a previous systolic design for the genetic algorithm. The simplification results in the removal of 2N 2 + 4N cells and reduces the time complexity by 3N + 1 cycles.

Multicore-enabling the MPJ express messaging library

With the transition to multicore processors almost complete, the parallel processing community is seeking efficient ways to port legacy message passing applications on shared memory and multicore processors. MPJ Express is our reference implementation of Message Passing Interface (MPI)-like bindings for the Java language. Starting with the current release, the MPJ Express software can be configured in two modes: the multicore and the cluster mode. In the multicore mode, parallel Java applications execute on shared memory or multicore processors. In the cluster mode, Java applications parallelized using MPJ Express can be executed on distributed memory platforms like compute clusters and clouds. The multicore device has been implemented using Java threads in order to satisfy two main design goals of portability and performance. We also discuss the challenges of integrating the multicore device in the MPJ Express software. This turned out to be a challenging task because the parallel application executes in a single JVM in the multicore mode. On the contrary in the cluster mode, the parallel user application executes in multiple JVMs. Due to these inherent architectural differences between the two modes, the MPJ Express runtime is modified to ensure correct semantics of the parallel program. Towards the end, we compare performance of MPJ Express (multicore mode) with other C and Java message passing libraries---including mpiJava, MPJ/Ibis, MPICH2, MPJ Express (cluster mode)---on shared memory and multicore processors. We found out that MPJ Express performs signicantly better in the multicore mode than in the cluster mode. Not only this but the MPJ Express software also performs better in comparison to other Java messaging libraries including mpiJava and MPJ/Ibis when used in the multicore mode on shared memory or multicore processors. We also demonstrate effectiveness of the MPJ Express multicore device in Gadget-2, which is a massively parallel astrophysics N-body siimulation code.

Exploring carrier agents in swarm-array computing

How can a bridge be built between autonomic computing approaches and parallel computing systems? The work reported in this paper is motivated towards bridging this gap by proposing a swarm-array computing approach based on ‘Intelligent Agents’ to achieve autonomy for distributed parallel computing systems. In the proposed approach, a task to be executed on parallel computing cores is carried onto a computing core by carrier agents that can seamlessly transfer between processing cores in the event of a predicted failure. The cognitive capabilities of the carrier agents on a parallel processing core serves in achieving the self-ware objectives of autonomic computing, hence applying autonomic computing concepts for the benefit of parallel computing systems. The feasibility of the proposed approach is validated by simulation studies using a multi-agent simulator on an FPGA (Field-Programmable Gate Array) and experimental studies using MPI (Message Passing Interface) on a computer cluster. Preliminary results confirm that applying autonomic computing principles to parallel computing systems is beneficial.

System identification using partitioned least squares

A novel partitioned least squares (PLS) algorithm is presented, in which estimates from several simple system models are combined by means of a Bayesian methodology of pooling partial knowledge. The method has the added advantage that, when the simple models are of a similar structure, it lends itself directly to parallel processing procedures, thereby speeding up the entire parameter estimation process by several factors.

Jini meets the Grid

There is an increasing interest in integrating Java-based, and in particular Jini systems, with the emerging Grid infrastructures. In this paper we explore various ways of integrating the key components of each architecture, their directory and information management services. In the first part of the paper we sketch out the Jini and Grid architectures and their services. We then review the components and services that Jini provides and compare these with those of the Grid. In the second part of the paper we critically explore four ways that Jini and the Grid could interact, here in particular we look at possible scenarios that can provide a seamless interface to a Jini environment for Grid clients and how to use Jini services from a Grid environment. In the final part of the paper we summarise our findings and report on future work being undertaken to integrate Jini and the Grid.

Comparing machine learning classifiers in potential distribution modelling

Species` potential distribution modelling consists of building a representation of the fundamental ecological requirements of a species from biotic and abiotic conditions where the species is known to occur. Such models can be valuable tools to understand the biogeography of species and to support the prediction of its presence/absence considering a particular environment scenario. This paper investigates the use of different supervised machine learning techniques to model the potential distribution of 35 plant species from Latin America. Each technique was able to extract a different representation of the relations between the environmental conditions and the distribution profile of the species. The experimental results highlight the good performance of random trees classifiers, indicating this particular technique as a promising candidate for modelling species` potential distribution. (C) 2010 Elsevier Ltd. All rights reserved.

Poly-bagging predictors for classification modelling for credit scoring

Credit scoring modelling comprises one of the leading formal tools for supporting the granting of credit. Its core objective consists of the generation of a score by means of which potential clients can be listed in the order of the probability of default. A critical factor is whether a credit scoring model is accurate enough in order to provide correct classification of the client as a good or bad payer. In this context the concept of bootstraping aggregating (bagging) arises. The basic idea is to generate multiple classifiers by obtaining the predicted values from the fitted models to several replicated datasets and then combining them into a single predictive classification in order to improve the classification accuracy. In this paper we propose a new bagging-type variant procedure, which we call poly-bagging, consisting of combining predictors over a succession of resamplings. The study is derived by credit scoring modelling. The proposed poly-bagging procedure was applied to some different artificial datasets and to a real granting of credit dataset up to three successions of resamplings. We observed better classification accuracy for the two-bagged and the three-bagged models for all considered setups. These results lead to a strong indication that the poly-bagging approach may promote improvement on the modelling performance measures, while keeping a flexible and straightforward bagging-type structure easy to implement. (C) 2011 Elsevier Ltd. All rights reserved.