992 resultados para Pázmány, Péter, 1570-1637


Relevância:

10.00% 10.00%

Publicador:

Resumo:

A microfluidic device designed for electrochemical studies on a microliter scale has been utilized for the examination of impurity levels in ionic liquids (ILs). Halide impurities are common following IL synthesis, and this study demonstrates the ability to quantify low concentrations of halide in a range of ILs to levels of similar to 5 ppm, even in ILs not currently measurable using other methods such as ion chromatography. To validate the mixer device, the electrochemistry of ferrocene was also examined and compared with spectroscopic and bulk electrochemistry measurements. An automated

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Crystallization of 1-butyl-3-methylimidazolium chloride from mixed ionic liquid or ionic liquid-aromatic solution, and from the melt yields different crystalline polymorphs, the first direct evidence for inhibition of crystallization in ionic liquids by polymorphism.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A través de un recorrido histórico centrado en el Renacimiento, se exponen las aportaciones más significativas de teóricos y artistas en la evolución del escorzo de la figura humana desde un punto de vista geométrico. Los artistas que con sus dibujos y escritos ayudaban a otros en el aprendizaje de la representación, se apresuraron a incluir el estudio del escorzo en sus tratados, buscando métodos que facilitaran su dibujo sobre cualquier soporte y en cualquier posición en el espacio. En este artículo se analizan y enlazan los trazados propuestos por los estudiosos de la geometría, con las obras de arte que reflejan importantes avances en este sentido. Soportes como el lienzo, el muro o la bóveda, presentan al pintor superficies diferentes de trabajo y en distintas posiciones en el espacio. La figura humana, protagonista en la escena, tendrá que adaptarse a ellos para ser contemplada desde unos espacios arquitectónicos cada vez más amplios y con más posibilidades. Fue necesario dominar la perspectiva en la pintura, y muy particularmente en la mural, para ofrecer composiciones cada día más ambiciosas y sorprendentes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

PURPOSE: A phase I study to define toxicity and recommend a phase II dose of the HSP90 inhibitor alvespimycin (17-DMAG; 17-dimethylaminoethylamino-17-demethoxygeldanamycin). Secondary endpoints included evaluation of pharmacokinetic profile, tumor response, and definition of a biologically effective dose (BED). PATIENTS AND METHODS: Patients with advanced solid cancers were treated with weekly, intravenous (i.v.) 17-DMAG. An accelerated titration dose escalation design was used. The maximum tolerated dose (MTD) was the highest dose at which = 1/6 patients experienced dose limiting toxicity (DLT). Dose de-escalation from the MTD was planned with mandatory, sequential tumor biopsies to determine a BED. Pharmacokinetic and pharmacodynamic assays were validated prior to patient accrual. RESULTS: Twenty-five patients received 17-DMAG (range 2.5-106 mg/m(2)). At 106 mg/m(2) of 17-DMAG 2/4 patients experienced DLT, including one treatment-related death. No DLT occurred at 80 mg/m(2). Common adverse events were gastrointestinal, liver function changes, and ocular. Area under the curve and mean peak concentration increased proportionally with 17-DMAG doses 80 mg/m(2) or less. In peripheral blood mononuclear cells significant (P

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Two nitride-strengthened reduced activation ferritic/martensitic (RAFM) steels with different Mn contents were investigated. The experimental steels were designed based on the chemical composition of Eurofer 97 steel but the C content was reduced to an extremely low level. Microstructure observation and hardness tests showed that the steel with low Mn content (0.47 wt.%) could not obtain a full martensitic microstructure due to the inevitable δ-ferrite independent of cooling rate after soaking. This steel showed similar room temperature strength and higher strength at 600 °C, but lower impact toughness, compared with Eurofer 97 steel. Fractography of the Charpy impact specimen revealed that the low room temperature toughness should be related to the Ta-rich inclusions initiating the cleavage fracture. The larger amount of V-rich nitrides and more dissolved Cr in the matrix could be responsible for the strength being similar to Eurofer 97 steel. In the second steel developed from the first steel by increasing the Mn content from 0.47 wt.% to 3.73 wt.%, a microstructure of full martensite could be obtained.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Flow maldistribution of the exhaust gas entering a Diesel Particulate Filter (DPF) can cause uneven soot distribution during loading and excessive temperature gradients during the regeneration phase. Minimising the magnitude of this maldistribution is therefore an important consideration in the design of the inlet pipe and diffuser, particularly in situations where packaging constraints dictate bends in the inlet pipe close to the filter, or a sharp diffuser angle. This paper describes the use of Particle Image Velocimetry (PIV) to validate a Computational Fluid Dynamic (CFD) model of the flow within the inlet diffuser of a DPF so that CFD can be used with confidence as a tool to minimise this flow maldistribution. PIV is used to study the flow of gas into a DPF over a range of steady state flow conditions. The distribution of flow approaching the front face of the substrate was of particular interest to this study. Optically clear diffusing cones were designed and placed between pipe and substrate to allow PIV analysis to take place. Stereoscopic PIV was used to eliminate any error produced by the optical aberrations caused by looking through the curved wall of the inlet cone. In parallel to the experiments, numerical analysis was carried out using a CFD program with an incorporated DPF model. Boundary conditions for the CFD simulations were taken from the experimental data, allowing an experimental validation of the numerical results. The CFD model incorporated a DPF model, the cement layers seen in segmented filters and the intumescent matting that is commonly used to pack the filter into a metal casing. The mesh contained approximately 580,000 cells and used the realizable ?-e turbulence model. The CFD simulation predicted both pressure drop across the DPF and the velocity field within the cone and at the DPF face with reasonable accuracy, providing confidence in the use the CFD in future work to design new, more efficient cones.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The oxidation of LDLs is considered a key step in the development of atherosclerosis. How LDL oxidation contributes to atherosclerosis remains poorly defined. Here we report that oxidized and glycated LDL (HOG-LDL) causes aberrant endoplasmic reticulum (ER) stress and that the AMP-activated protein kinase (AMPK) suppressed HOG-LDL-triggered ER stress in vivo.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Biodiversity continues to decline in the face of increasing anthropogenic pressures such as habitat destruction, exploitation, pollution and introduction of alien species. Existing global databases of species' threat status or population time series are dominated by charismatic species. The collation of datasets with broad taxonomic and biogeographic extents, and that support computation of a range of biodiversity indicators, is necessary to enable better understanding of historical declines and to project - and avert - future declines. We describe and assess a new database of more than 1.6 million samples from 78 countries representing over 28,000 species, collated from existing spatial comparisons of local-scale biodiversity exposed to different intensities and types of anthropogenic pressures, from terrestrial sites around the world. The database contains measurements taken in 208 (of 814) ecoregions, 13 (of 14) biomes, 25 (of 35) biodiversity hotspots and 16 (of 17) megadiverse countries. The database contains more than 1% of the total number of all species described, and more than 1% of the described species within many taxonomic groups - including flowering plants, gymnosperms, birds, mammals, reptiles, amphibians, beetles, lepidopterans and hymenopterans. The dataset, which is still being added to, is therefore already considerably larger and more representative than those used by previous quantitative models of biodiversity trends and responses. The database is being assembled as part of the PREDICTS project (Projecting Responses of Ecological Diversity In Changing Terrestrial Systems - http://www.predicts.org.uk). We make site-level summary data available alongside this article. The full database will be publicly available in 2015.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objectives. We compared the mental health risk to unpaid caregivers bereaved of a care recipient with the risk to persons otherwise bereaved and to nonbereaved caregivers.

Methods. We linked prescription records for antidepressant and anxiolytic drugs to characteristics and life-event data of members of the Northern Ireland Longitudinal Study (n = 317 264). Using a case-control design, we fitted logistic regression models, stratified by age, to model relative likelihood of mental health problems, using the proxy measures of mental health–related prescription.

Results. Both caregivers and bereaved individuals were estimated to be at between 20% and 50% greater risk for mental health problems than noncaregivers in similar circumstances (for bereaved working-age caregivers, odds ratio = 1.41; 95% confidence interval = 1.27, 1.56). For older people, there was no evidence of additional risk to bereaved caregivers, though there was for working-age people. Older people appeared to recover more quickly from caregiver bereavement.

Conclusions. Caregivers were at risk for mental ill health while providing care and after the death of the care recipient. Targeted caregiver support needs to extend beyond the life of the care recipient.


Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this paper, we employ a unique dataset of actual US dollar (USD) forward positions against a number of currencies taken by so-called Commodity Trading Advisors (CTAs). We investigate to what extent these positions exhibit a pattern of USD carry trading or other patterns of currency trading over the recent period of the ultra-loose US monetary policy. Our analysis indeed shows that USD positions against emerging market currencies are characterised by a pattern of carry trading. That is, the USD, as the lower yielding currency, is associated with short positions. The payoff distributions of these positions, moreover, are found to have positive Sharpe ratios, negative skewness and high kurtosis. On the other hand, we find that USD positions against other advanced country currencies have a pattern completely opposite to carry trading which is in line with uncovered interest parity trading; that is, the lower (higher) yielding currency is associated with long (short) positions.