What explains productivity differentials across spanish cities?

This paper estimates the determinants of productivity differentials across urban areas in Spain. To do so we resort to Spanish Social Security administrative data (MCVL) matched with workers’ fiscal information. We use two-step approach that allows us to control for the confounding effects due to the sorting of more productive workers and more productive firms in bigger cities. Our results indicate that city size is a significant determinant of productivity differentials across Spanish urban areas. We estimate an elasticity of urban agglomeration of 3.3%, which is within the range of values already observed in other countries. We also find that the level of human capital, firm size and the level of industrial specialization also matters in order explain productivity differentials across Spanish cities. Keywords: Agglomeration, wages, productivity, city size. JEL codes: R10, R23, J31

Decomposing differences in total factor productivity across firm size

This paper investigates the extent to which the gap in total factor productivity between small and large firms is due to differences in the endowment of factors determining productivity and to the returns associated with these factors. We place particular emphasis on the contribution of differences in the propensity to innovate and in the use of skilled labor across firms of different size. Empirical evidence from a representative sample of Spanish manufacturing firms corroborates that both differences in endowments and returns to innovation and skilled labor significantly contribute to the productivity gap between small and large firms. In addition, it is observed that the contribution of innovation to this gap is caused only by differences in quantity, while differences in returns have no effect; in the case of human capital, however, most of the effect can be attributed to increasing differences in returns between small and large firms.

Do innovation and human capital explain the productivity gap between small and large firms?

Empirical evidence is compelling that large firms are more productive than small firms. The hypothesis in this paper is that the productivity differences between small and large firms are associated with two of the main determinants of a firm’s performance: the human and technological capital that firms incorporate. We suggest that the contribution of these factors in explaining the productivity-size gap might not only be due to the fact that large firms make a more extensive use of them, but also because large firms obtain higher returns from their investment in human and technological capital. The evidence we obtain for a comprehensive sample of Spanish manufacturing firms (1990-2002) supports this hypothesis, which has important implications for the effectiveness of policies designed to improve productivity in SMEs by stimulating innovation and the use of more skilled workers.

Operational Cost Reduction in WDM Networks using Lighttours

Wavelength division multiplexing (WDM) networks have been adopted as a near-future solution for the broadband Internet. In previous work we proposed a new architecture, named enhanced grooming (G+), that extends the capabilities of traditional optical routes (lightpaths). In this paper, we compare the operational expenditures incurred by routing a set of demands using lightpaths with that of lighttours. The comparison is done by solving an integer linear programming (ILP) problem based on a path formulation. Results show that, under the assumption of single-hop routing, almost 15% of the operational cost can be reduced with our architecture. In multi-hop routing the operation cost is reduced in 7.1% and at the same time the ratio of operational cost to number of optical-electro-optical conversions is reduced for our architecture. This means that ISPs could provide the same satisfaction in terms of delay to the end-user with a lower investment in the network architecture

Self-reported sitting time and physical activity: interactive associations with mental well-being and productivity in office employees

Abstract Background: Little is known about how sitting time, alone or in combination with markers of physical activity (PA), influences mental well-being and work productivity. Given the need to develop workplace PA interventions that target employees’ health related efficiency outcomes; this study examined the associations between self-reported sitting time, PA, mental well-being and work productivity in office employees. Methods: Descriptive cross-sectional study. Spanish university office employees (n = 557) completed a survey measuring socio-demographics, total and domain specific (work and travel) self-reported sitting time, PA (International Physical Activity Questionnaire short version), mental well-being (Warwick-Edinburg Mental Well-Being Scale) and work productivity (Work Limitations Questionnaire). Multivariate linear regression analyses determined associations between the main variables adjusted for gender, age, body mass index and occupation. PA levels (low, moderate and high) were introduced into the model to examine interactive associations. Results: Higher volumes of PA were related to higher mental well-being, work productivity and spending less time sitting at work, throughout the working day and travelling during the week, including the weekends (p < 0.05). Greater levels of sitting during weekends was associated with lower mental well-being (p < 0.05). Similarly, more sitting while travelling at weekends was linked to lower work productivity (p < 0.05). In highly active employees, higher sitting times on work days and occupational sitting were associated with decreased mental well-being (p < 0.05). Higher sitting times while travelling on weekend days was also linked to lower work productivity in the highly active (p < 0.05). No significant associations were observed in low active employees. Conclusions: Employees’ PA levels exerts different influences on the associations between sitting time, mental well-being and work productivity. The specific associations and the broad sweep of evidence in the current study suggest that workplace PA strategies to improve the mental well-being and productivity of all employees should focus on reducing sitting time alongside efforts to increase PA.

Local human capital and productivity: An analysis for Spanish regions

In this paper, we examine the relationship between the stock of human capital and productivity in the Spanish regions (NUTS III), and assess whether the transmission channel involves external economies. The empirical evidence points to a positive relationship between the two variables, although it cannot be explained in terms of the impact of exogenous local human capital external economies, but rather in terms of other demand factors.

Wages and productivity: the role of labour market institutions in OECD countries

In the context of a monetary union, to keep a territorial equilibrium in terms of economic activity and employment, the relationship between real wages and productivity is crucial. In this paper, empirical evidence about the response of wages to productivity is obtained for 20 OECD countries and the role of labour market institutions to explain differences in this response is analysed.

The Effect of Operational Disturbances on Reliability and Operation Time Distribution of NCmachine Tools in FMS

This thesis concentrates on studying the operational disturbance behavior of machine tools integrated into FMS. Operational disturbances are short term failures of machine tools which are especially disruptive to unattended or unmanned operation of FMS. The main objective was to examine the effect of operational disturbances on reliability and operation time distribution for machine tools. The theoretical part of the thesis covers the fimdamentals of FMS relating to the subject of this study. The concept of FMS, its benefits and operator's role in FMS operation are reviewed. The importance of reliability is presented. The terms describing the operation time of machine tools are formed by adopting standards and references. The concept of failure and indicators describing reliability and operational performance for machine tools in FMSs are presented. The empirical part of the thesis describes the research methodology which is a combination of automated (ADC) and manual data collection. By using this methodology it is possible to have a complete view of the operation time distribution for studied machine tools. Data collection was carried out in four FMSs consisting of a total of 17 machine tools. Each FMS's basic features and the signals of ADC are described. The indicators describing the reliability and operation time distribution of machine tools were calculated according to collected data. The results showed that operational disturbances have a significant influence on machine tool reliability and operational performance. On average, an operational disturbance occurs every 8,6 hours of operation time and has a down time of 0,53 hours. Operational disturbances cause a 9,4% loss in operation time which is twice the amount of losses caused by technical failures (4,3%). Operational disturbances have a decreasing influence on the utilization rate. A poor operational disturbance behavior decreases the utilization rate. It was found that the features of a part family to be machined and the method technology related to it are defining the operational disturbance behavior of the machine tool. Main causes for operational disturbances were related to material quality variations, tool maintenance, NC program errors, ATC and machine tool control. Operator's role was emphasized. It was found that failure recording activity of the operators correlates with the utilization rate. The more precisely the operators record the failure, the higher is the utilization rate. Also the FMS organizations which record failures more precisely have fewer operational disturbances.

Neurocognition in schizophrenia: a study of the productivity and visibility of spanish authors

This paper provides a map of the scientific productivity of authors affiliated to a Spanish institution and who have addressed one of the most important current topics in schizophrenia: The study of cognitive performance. A search of the Web of Science yielded 125 articles that met the inclusion criteria. In order to provide a comprehensive overview of scientific productivity, we examine several bibliometric indicators, concerning both productivity and impact or visibility. The analysis also focuses on qualitative aspects of key theoretical importance, such as the kinds of cognitive functions that are most often assessed and the tests most widely used to evaluate them in clinical practice. The study shows that interest in the subject of cognitive function in schizophrenia has increased considerably in Spain since the beginning of this century. The results also highlight the need to standardize the type of tests to be used in the cognitive assessment of patients with schizophrenia.

Balancing effluent quality, economic cost and greenhouse gas emissions during the evaluation of (plant-wide) control/operational strategies in WWTPs

The objective of this paper was to show the potential additional insight that result from adding greenhouse gas (GHG) emissions to plant performance evaluation criteria, such as effluent quality (EQI) and operational cost (OCI) indices, when evaluating (plant-wide) control/operational strategies in wastewater treatment plants (WWTPs). The proposed GHG evaluation is based on a set of comprehensive dynamic models that estimate the most significant potential on-site and off-site sources of CO2, CH4 and N2O. The study calculates and discusses the changes in EQI, OCI and the emission of GHGs as a consequence of varying the following four process variables: (i) the set point of aeration control in the activated sludge section; (ii) the removal efficiency of total suspended solids (TSS) in the primary clarifier; (iii) the temperature in the anaerobic digester; and (iv) the control of the flow of anaerobic digester supernatants coming from sludge treatment. Based upon the assumptions built into the model structures, simulation results highlight the potential undesirable effects of increased GHG production when carrying out local energy optimization of the aeration system in the activated sludge section and energy recovery from the AD. Although off-site CO2 emissions may decrease, the effect is counterbalanced by increased N2O emissions, especially since N2O has a 300-fold stronger greenhouse effect than CO2. The reported results emphasize the importance and usefulness of using multiple evaluation criteria to compare and evaluate (plant-wide) control strategies in a WWTP for more informed operational decision making

Economical and operational analysis of outsourced warehouse function

The target of the thesis was to find out has the decision to outsource part of Filtronic LK warehouse function been profitable. Furthermore, another thesis target was to demonstrate current logistics processes between TPLP and company and find out the targets for developing these processes. The decision to outsource part of logistical funtions have been profitable during the first business year. Partnership includes always business risks. Risk increases high asset specific investments. In the other hand investment to partnership increases mutual trust and commitment between parties. By developing partnership risks and opportunitic behaviour can be decreased. The potential of managing material and data flows between logistic service provider and company observed. By analyzing inventory effiency were highlighted the need for decreasing the capital invested to inventories. The recommendations for managing outsourced logistical funtions were established such as improving partnership, process development, performance measurement and invoice checking.

Productivity, Technical eficiency and internationalisation of the Spanish chemical sector

relationship between productivity and international position of Spanish chemical firms in the period 2005-2011. The goal is to determine whether companies that follow and international strategy, either with exports or by investment in foreign countries obtain greater productivity growth than these that do not operate in global market. For this purpose a panel data set with microdata has been created. A preliminary analysis of the evolution of productivity growth in the sector is carried out. The measurement of Total Factor Productivity is performed. With the estimated TFP we analyze the differentials in productivity growth, comparing the effects of export and investment behavior with non-international firms.

Kunnallisen tai seudullisen toimitilahallinnon yhtiöittämisen edut ja haitat

Tutkimuksen aihe liittyy kunnallisten toimitilojen yhtiöittämiskysymykseen, joka on ollut esillä monissa kunnissa useita vuosia ja laajentunut nyt seudulliseksi. Tutkimuksen tavoitteena on tarkastella, mitä hyötyä tai haittaa kunnallisen tai seudullisen toimitilahallinnosta vastaavan yksikön yhtiöittämisestä olisi. Parantaakseen tuottavuutta kunta voi järjestää toimintansa perinteisen kunnallisen organisoinnin sijaan liikelaitoksena tai osakeyhtiönä silloin, kun toiminnan laatu on liiketoiminnan luonteista. Suurin osa kuntien toimitilakiinteistöistä toimii kuntien palvelutuotannon suoranaisena tuotantovälineenä. Kuntien välisen yhteistoiminnan lisääminen voidaan nähdä mahdollisuutena julkisella sektorilla. Sen lisääminen edesauttaa tuottavuuden kasvua ja mahdollistaa palvelujen jatkuvan kehittämisen. Yhtiöittäminen tuo toimintaan mukaan asioita, jotka varmasti tehostavat toimintaa, kuten päätöksenteon nopeutuminen, toiminnan joustavuus, joustava ja kilpailukykyinen henkilöstöhallinto sekä yhtiön toiminnan ja päätösten ei-julkisuus jne. Huonoja puolia yhtiöittämisessä on kuntien kiinteistömenojen mahdollinen nousu käyttötalouspuolella sekä se, että yhtiöllä olisi käytännössä vain muutama asiakas. Suomessa kuntien toimitilahallinto on todennäköisesti menossa kohti yhtiömallia. Vaihtoehtoina yhtiöittämiselle ovat siis liikelaitosmallin kehittäminen ja joissain tapauksissa keskinäinen kiinteistöyhtiömalli. Joka tapauksessa kuntien toimitilahallintoyksiköiden toimintaa ja toimintamallia pitää kehittää, jotta niiden tuottavuus kasvaa sekä toiminta säilyy kannattavana ja järkevänä. Ulkoisten tekijöiden vaikutus kuntien toimitilahallinnon toimintaan kasvaa koko ajan.