Mileage, car ownership, experience of punishment avoidance and the risky driving of young drivers

Objective: Young drivers are at greatest risk of injury or death from a car crash in the first six months of independent driving. In Queensland, the graduated driver licensing (GDL) program was extensively modified in July 2007 in order to reduce this risk. Increased mileage and car ownership have been found to play a role in risky driving, offences and crashes; however GDL programs typically do not consider these variables. In addition, young novice drivers’ experiences of punishment avoidance have not previously been examined. The paper explores the mileage (duration and distance), car ownership and punishment avoidance behaviour of young newly-licensed intermediate (Provisional) drivers and their relationship with risky driving, crashes and offences. Methods: Drivers (n = 1032) aged 17-19 years recruited from across Queensland for longitudinal research completed Survey 1 exploring pre-licence and Learner experiences and sociodemographic characteristics. Survey 2 explored the same variables with a subset of these drivers (n = 341) after they had completed their first six months of independent driving. Results: Most young drivers in Survey 2 reported owning a vehicle and paying attention to Police presence. Drivers who had their own car reported significantly greater mileage and more risky driving. Novices who drove more kilometres, spent more hours each week driving, or avoided actual and anticipated Police presence were more likely to report risky driving. These drivers were also more likely to report being detected by Police for a driving-related offence. The media, parents, friends and other drivers play a pivotal role in informing novices of on-road Police enforcement operations. Conclusions: GDL programs should incorporate education for the parent and novice driver regarding the increased risks associated with greater driving particularly where the novices own a vehicle. Parents should be encouraged to delay exclusive access to a vehicle for the novice driver. Parents should also consider whether their young novice will deliberately avoid Police if they tell them their location. This may reinforce not only the risky behaviour but also the young novice’s beliefs that their parents condone this behaviour.

The relative importance of factors influencing bicycling crash risk

Government promotion of active transport has renewed interest in cycling safety. Research has shown that bicyclists are up to 20 times more likely to be involved in serious injury crashes than drivers. On-road cycling injuries are under-reported in police data, and many non-serious injuries are not recorded in any official database. This study aims to explore the relationships between rider characteristics and environmental factors that influence per kilometre risk of bicycle-related crash and non-crash injuries.

Chronological age and age-related cognitive deficits are associated with an increase in multiple types of driving errors in late life

Objective: Older driver research has mostly focused on identifying that small proportion of older drivers who are unsafe. Little is known about how normal cognitive changes in aging affect driving in the wider population of adults who drive regularly. We evaluated the association of cognitive function and age, with driving errors. Method: A sample of 266 drivers aged 70 to 88 years were assessed on abilities that decline in normal aging (visual attention, processing speed, inhibition, reaction time, task switching) and the UFOV® which is a validated screening instrument for older drivers. Participants completed an on-road driving test. Generalized linear models were used to estimate the associations of cognitive factor with specific driving errors and number of errors in self-directed and instructor navigated conditions. Results: All errors types increased with chronological age. Reaction time was not associated with driving errors in multivariate analyses. A cognitive factor measuring Speeded Selective Attention and Switching was uniquely associated with the most errors types. The UFOV predicted blindspot errors and errors on dual carriageways. After adjusting for age, education and gender the cognitive factors explained 7% of variance in the total number of errors in the instructor navigated condition and 4% of variance in the self-navigated condition. Conclusion: We conclude that among older drivers errors increase with age and are associated with speeded selective attention particularly when that requires attending to the stimuli in the periphery of the visual field, task switching, errors inhibiting responses and visual discrimination. These abilities should be the target of cognitive training.

Young and unlicensed : risky driving before entering the licensing system

Objective: On-road driving before gaining a valid licence (pre-Licence driving) represents a risk for all road users. Pre-Licence driving among young people who obtained a Provisional licence within an enhanced graduated driver licensing program in Queensland, Australia, was investigated. Methods: Recently-licensed drivers (n = 1032) aged 17-19 years (M = 17.54) completed a survey exploring their driving experiences while on their Learners licence. Six months later, 355 of these drivers completed the same survey exploring their experiences on their Provisional (intermediate) licence. Results: Twelve percent of participants reported pre-Licence driving. Pre-Licence drivers reported significantly more risky driving as Learners and Provisional drivers. Conclusions: Pre-Licence drivers not only place themselves and other road users at risk at the time but also continue to do so through their subsequent risky driving. Pre-licence driving should be discouraged, and parents should be encouraged to monitor car use and the driving behaviour of their children.

Load modelling : induction motors

Modelling the power systems load is a challenge since the load level and composition varies with time. An accurate load model is important because there is a substantial component of load dynamics in the frequency range relevant to system stability. The composition of loads need to be charaterised because the time constants of composite loads affect the damping contributions of the loads to power system oscillations, and their effects vary with the time of the day, depending on the mix of motors loads. This chapter has two main objectives: 1) describe the load modelling in small signal using on-line measurements; and 2) present a new approach to develop models that reflect the load response to large disturbances. Small signal load characterisation based on on-line measurements allows predicting the composition of load with improved accuracy compared with post-mortem or classical load models. Rather than a generic dynamic model for small signal modelling of the load, an explicit induction motor is used so the performance for larger disturbances can be more reliably inferred. The relation between power and frequency/voltage can be explicitly formulated and the contribution of induction motors extracted. One of the main features of this work is the induction motor component can be associated to nominal powers or equivalent motors

Bicycling injuries and perceived risk

Introduction Government promotion of active transport has renewed interest in cycling safety. Research has shown that bicyclists are up to 20 times more likely to be involved in serious injury crashes than drivers. On-road cycling injuries are under-reported in police data, and many non-serious injuries are not recorded in any official database. This study aims to explore the relationships between rider characteristics and environmental factors that influence per kilometre risk of bicycle-related crash and non-crash injuries. Method A survey of 2,532 Queensland adults who had ridden at least once in the past year was conducted from October 2009 to March 2010, with most responses received online (99.3%). Riders were asked where they rode (footpath, bike path, road etc.), average travel speed, purpose of riding, type of bike ridden, how far and how often they rode in. Measures of rider experience, skill, safety perceptions, safety behaviours, crash involvement and demographic characteristics were also collected. RESULTS Increasing exposure and having more expensive bicycles were shown to reduce the risk per km of crash and non-crash injury rates, and to reduce perceived risk. Never wearing bright coloured clothing related to increased crash risk, use of fluorescent and reflective clothing had no effect on crash risk. Riding in low-speed environments, never using a front light, and riding in low-speed environments were associated with reduced non-crash injury risk. Perceived risk was influenced by exposure, use of conspicuity aids and helmets, riding for utilitarian reasons, and group-riding behaviours. DISCUSSION Perceived risk does not appear to influence injury rates and injury rates do not appear to influence the perceived risk of cycling. Riders who perceive cycling to be risky tend not to be commuters, do not engage in group riding and always wear helmets. Not all measures of conspicuity were associated with risk, with rear lights found to have no relationship to injury. The risks of experiencing a crash or non-crash injury were similar, therefore injury prevention strategies should expand their scope to include other factors such as the importance of bicycle set-up.

A roadside survey of unlicensed driving in Queensland

Unlicensed driving remains a serious problem in many jurisdictions, and while it does not play a direct causative role in road crashes, it undermines driver licensing systems and is linked to other high risk driving behaviours. Roadside licence check surveys represent the most direct means of estimating the prevalence of unlicensed driving. The current study involved the Queensland Police Service (QPS) checking the licences of 3,112 drivers intercepted at random breath testing operations across Queensland between February and April 2010. Data was matched with official licensing records from Transport and Main Roads (TMR) via the drivers’ licence number. In total, 2,914 (93.6%) records were matched, with the majority of the 198 unmatched cases representing international or interstate licence holders (n = 156), leaving 42 unknown cases. Among the drivers intercepted at the roadside, 20 (0.6%) were identified as being unlicensed at the time, while a further 11 (0.4%) were driving unaccompanied on a Learner Licence. However, the examination of TMR licensing records revealed that an additional 9 individuals (0.3%) had a current licence sanction but were not identified as unlicensed by QPS. Thus, in total 29 of the drivers were unlicensed at the time, representing 0.9% of all the drivers intercepted and 1% of those for whom their licence records could be checked. This is considerably lower than the involvement of unlicensed drivers in fatal and serious injury crashes in Queensland, which is consistent with other research confirming the increased crash risk of the group. However, the number of unmatched records suggest that it is possible the on-road survey may have under-estimated the prevalence of unlicensed driving, so further development of the survey method is recommended.

Exploring perceived legitimacy of traffic law enforcement

The purpose of traffic law enforcement is to encourage compliant driver behaviour. That is, the threat of an undesirable sanction encourages drivers to comply with traffic laws. However, not all traffic law violations are considered equal. For example, while drink driving is generally seen as socially unacceptable, behaviours such as speeding are arguably less so, and speed enforcement is often portrayed in the popular media as a means of “revenue raising”. The perceived legitimacy of traffic law enforcement has received limited research attention to date. Perceived legitimacy of traffic law enforcement may influence (or be influenced by) attitudes toward illegal driving behaviours, and both of these factors are likely to influence on-road driving behaviour. This study aimed to explore attitudes toward a number of illegal driving behaviours and traffic law enforcement approaches that typically target these behaviours using self-reported data from a large sample of drivers. The results of this research can be used to inform further research in this area, as well as the content of public education and advertising campaigns designed to influence attitudes toward illegal driving behaviours and perceived legitimacy of traffic law enforcement.

Too sleepy to drive : self-perception and regulation of driving when sleepy

Background: Sleepiness is a direct contributor to a substantial proportion of fatal and severe road cashes. A number of technological solutions designed to detect sleepiness have been developed, but self-awareness of increasing sleepiness remains a critical component in on-road strategies for mitigating this risk. In order to take appropriate action when sleepy, drivers’ perceptions of their level of sleepiness must be accurate. Aims: This study aimed to assess capacity to accurately identify sleepiness and self-regulate driving cessation during a validated driving simulator task. Participants: Participants comprised 26 young adult drivers (20-28 years). The drivers had open licenses but no other exclusion criteria where used. Methods: Participants woke at 5am, and took part in a laboratory-based hazard perception driving simulation, either at mid-morning or mid-afternoon. Established physiological measures (including EEG) and subjective measures (sleepiness ratings) previously found sensitive to changes in sleepiness levels were utilised. Participants were instructed to ‘drive’ until they believed that sleepiness had impaired their ability to drive safely. They were then offered a nap opportunity. Results: The mean duration of the drive before cessation was 39 minutes (±18 minutes). Almost all (23/26) of the participants then achieved sleep during the nap opportunity. These data suggest that the participants’ perceptions of sleepiness were specific. However, EEG data from a number of participants suggested very high levels of sleepiness prior to driving cessation, suggesting poor sensitivity. Conclusions: Participants reported high levels of sleepiness while driving after very moderate sleep restriction. They were able to identify increasing sleepiness during the test period, could decide to cease driving and in most cases were sufficiently sleepy to achieve sleep during the daytime session. However, the levels of sleepiness achieved prior to driving cessation suggest poor accuracy in self-perception and regulation. This presents practical issues for the implementation of fatigue and sleep-related strategies to improve driver safety.

Normative influences across cultures : conceptual differences and potential confounders among drivers in Australia and China

Normative influences on road user behaviour have been well documented and include such things as personal, group, subjective and moral norms. Commonly, normative factors are examined within one cultural context, although a few examples of exploring the issue across cultures exist. Such examples add to our understanding of differences in perceptions of the normative factors that may exert influence on road users and can assist in determining whether successful road safety interventions in one location may be successful in another. Notably, the literature is relatively silent on such influences in countries experiencing rapidly escalating rates of motorization. China is one such country where new drivers are taking to the roads in unprecedented numbers and authorities are grappling with the associated challenges. This paper presents results from qualitative and quantitative research on self-reported driving speeds of car drivers and related issues in Australia and China. Focus group interviews and questionnaires conducted in each country examined normative factors that might influence driving in each cultural context. Qualitative findings indicated perceptions of community acceptance of speeding were present in both countries but appeared more widespread in China, yet quantitative results did not support this difference. Similarly, with regard to negative social feedback from speeding, qualitative findings suggested no embarrassment associated with speeding among Chinese participants and mixed results among Australian participants, yet quantitative results indicated greater embarrassment for Chinese drivers. This issue was also examined from the perspective of self-identity and findings were generally similar across both samples and appear related to whether it is important to be perceived as a skilled/safe driver by others. An interesting and important finding emerged with regard to how Chinese drivers may respond to questions about road safety issues if the answers might influence foreigners’ perceptions of China. In attempting to assess community norms associated with speeding, participants were asked to describe what they would tell a foreign visitor about the prevalence of speeding in China. Responses indicated that if asked by a foreigner, people may answer in a manner that portrayed China as a safe country (e.g., that drivers do not speed), irrespective of the actual situation. This ‘faking good for foreigners’ phenomenon highlights the importance of considering ‘face’ when conducting research in China – a concept absent from the road safety literature. An additional noteworthy finding that has been briefly described in the road safety literature is the importance and strength of the normative influence of social networks (guanxi) in China. The use of personal networks to assist in avoiding penalties for traffic violations was described by Chinese participants and is an area that could be addressed to strengthen the deterrent effect of traffic law enforcement. Overall, the findings suggest important considerations for developing and implementing road safety countermeasures in different cultural contexts.

Gender differences in recreational and transport cycling : a cross-sectional mixed-methods comparison of cycling patterns, motivators, and constraints

Background: Gender differences in cycling are well-documented. However, most analyses of gender differences make broad comparisons, with few studies modeling male and female cycling patterns separately for recreational and transport cycling. This modeling is important, in order to improve our efforts to promote cycling to women and men in countries like Australia with low rates of transport cycling. The main aim of this study was to examine gender differences in cycling patterns and in motivators and constraints to cycling, separately for recreational and transport cycling. Methods: Adult members of a Queensland, Australia, community bicycling organization completed an online survey about their cycling patterns; cycling purposes; and personal, social and perceived environmental motivators and constraints (47% response rate). Closed and open-end questions were completed. Using the quantitative data, multivariable linear, logistic and ordinal regression models were used to examine associations between gender and cycling patterns, motivators and constraints. The qualitative data were thematically analysed to expand upon the quantitative findings. Results: In this sample of 1862 bicyclists, men were more likely than women to cycle for recreation and for transport, and they cycled for longer. Most transport cycling was for commuting, with men more likely than women to commute by bicycle. Men were more likely to cycle on-road, and women off-road. However, most men and women did not prefer to cycle on-road without designed bicycle lanes, and qualitative data indicated a strong preference by men and women for bicycle-only off-road paths. Both genders reported personal factors (health and enjoyment related) as motivators for cycling, although women were more likely to agree that other personal, social and environmental factors were also motivating. The main constraints for both genders and both cycling purposes were perceived environmental factors related to traffic conditions, motorist aggression and safety. Women, however, reported more constraints, and were more likely to report as constraints other environmental factors and personal factors. Conclusion: Differences found in men’s and women’s cycling patterns, motivators and constraints should be considered in efforts to promote cycling, particularly in efforts to increase cycling for transport.

Do drivers respond emotionally and behaviourally differently to an intentionally anger provoking driving situation than to an ambiguous, but potentially provocative, one? Results of a self-report survey.

Aggressive driving is considered an important road-safety concern for drivers in highly motorised countries. However, understanding of the causes and maintenance factors fundamental to aggressive driving is limited. In keeping with theoretical advances from general aggression research such as the General Aggression Model (GAM), research has begun to examine the emotional and cognitive antecedents of aggressive driving in order to better understand the underlying processes motivating aggressive driving. Early findings in the driving area have suggested that greater levels of aggression are elicited in response to an intentionally aggressive on-road event. In contrast, general aggression research suggests that greater levels of aggression are elicited in response to an ambiguous event. The current study examined emotional and cognitive responses to two hypothetical driving scenarios with differing levels of aggressive intent (intentional versus ambiguous). There was also an interest in whether factors influencing responses were different for hostile aggression (that is, where the action is intended to harm the other) versus instrumental aggression (that is, where the action is motivated by an intention to remove an impediment or attain a goal). Results were that significantly stronger negative emotion and negative attributions, as well as greater levels of threat were reported in response to the scenario which was designed to appear intentional in nature. In addition, participants were more likely to endorse an aggressive behavioural response to a situation that appeared deliberately aggressive than to one where the intention was ambiguous. Analyses to determine if greater levels of negative emotions and cognitions are able to predict aggressive responses provided different patterns of results for instrumental aggression from those for hostile aggression. Specifically, for instrumental aggression, negative emotions and negative attributions were significant predictors for both the intentional and the ambiguous scenarios. In addition, perceived threat was also a significant predictor where the other driver’s intent was clearly aggressive. However, lower rather than higher, levels of perceived threat were associated with greater endorsement of an aggressive response. For hostile aggressive behavioural responses, trait aggression was the strongest predictor for both situations. Overall the results suggest that in the driving context, instrumental aggression is likely to be a much more common response than hostile aggression. Moreover, aggressive responses are more likely in situations where another driver’s behaviour is clearly intentional rather than ambiguous. The results also support the conclusion that there may be different underlying mechanisms motivating an instrumental aggressive response to those motivating a hostile one. In addition, understanding the emotions and cognitions underlying aggressive driving responses may be helpful in predicting and intervening to reduce driving aggression. The finding that drivers appear to regard tailgating as an instrumental response is of concern since this behaviour has the potential to result in crashes.

Innovative Products Focus Group Report 2012. Brisbane: QUT

This report presents the results of Phase 3 of the Innovative Road Products Project: National Focus Groups. The groups developed solutions to address the most important obstacles constraining the adoption of innovative products in Australian road construction projects. The Innovative Products Survey, the major Project deliverable in 2011, and the largest innovation survey ever undertaken in the Australian road consutrction industry, results in the identification of key obstacles constraining the adoption of innovative products on road projects.

Advanced battery storage control for an autonomous microgrid

A new control method for battery storage to maintain acceptable voltage profile in autonomous microgrids is proposed in this article. The proposed battery control ensures that the bus voltages in the microgrid are maintained during disturbances such as load change, loss of micro-sources, or distributed generations hitting power limit. Unlike the conventional storage control based on local measurements, the proposed method is based on an advanced control technique, where the reference power is determined based on the voltage drop profile at the battery bus. An artificial neural network based controller is used to determine the reference power needed for the battery to hold the microgrid voltage within regulation limits. The pattern of drop in the local bus voltage during power imbalance is used to train the controller off-line. During normal operation, the battery floats with the local bus voltage without any power injection. The battery is charged or discharged during the transients with a high gain feedback loop. Depending on the rate of voltage fall, it is switched to power control mode to inject the reference power determined by the proposed controller. After a defined time period, the battery power injection is reduced to zero using slow reverse-droop characteristics, ensuring a slow rate of increase in power demand from the other distributed generations. The proposed control method is simulated for various operating conditions in a microgrid with both inertial and converter interfaced sources. The proposed battery control provides a quick load pick up and smooth load sharing with the other micro-sources in a disturbance. With various disturbances, maximum voltage drop over 8% with conventional energy storage is reduced within 2.5% with the proposed control method.

A simulation framework for smart meter security evaluation

The evolution of classic power grids to smart grids creates chances for most participants in the energy sector. Customers can save money by reducing energy consumption, energy providers can better predict energy demand and environment benefits since lower energy consumption implies lower energy production including a decrease of emissions from plants. But information and communication systems supporting smart grids can also be subject to classical or new network attacks. Attacks can result in serious damage such as harming privacy of customers, creating economical loss and even disturb the power supply/demand balance of large regions and countries. In this paper, we give an overview about the German smart measuring architecture, protocols and security. Afterwards, we present a simulation framework which enables researchers to analyze security aspects of smart measuring scenarios.