Estudio de los principales CMS para la creación de una red social

Actualmente las redes sociales son muy utilizadas en todo el mundo, existen diferentes tipos de redes sociales con las que podemos conectar con amigos, ampliar nuestra red de contactos profesionales, aprender cosas nuevas, etc. Su elevado uso las ha convertido en uno de los negocios más rentables en internet generando fortunas para sus creadores, principalmente, a través de la publicidad. Muchas redes sociales son creadas por empresas que cuentan con un equipo experto, pero otras muchas han sido creadas por personas comunes, con bajos conocimientos informáticos, muchos motivados en sus aficiones o carreras profesionales, que al no encontrar nada en la red que les resulte útil, han decidido desarrollar ellos mismos sus propias redes sociales con la ayuda de herramientas informáticas. Una de esas herramientas son los sistemas de gestión de contenidos (CMS), con los cuales ahorraremos mucho tiempo de desarrollo y no necesitaremos invertir grandes cantidades de dinero. Este proyecto trata, principalmente, de cómo crear redes sociales haciendo uso de estas herramientas y tiene el objetivo de ser lo suficientemente claro para que cualquier persona, sin importar su nivel de conocimientos técnicos, sea capaz de desarrollar sus ideas. En la primera parte del proyecto se habla sobre las redes sociales en general y el impacto de éstas en la sociedad actual, donde se ve que, actualmente, debido a la cantidad de redes sociales y a la accesibilidad móvil, el uso de las redes sociales es una cotidianidad. También se explican algunos métodos para obtener beneficios económicos de una red social y las ventajas que presentan las redes sociales específicas frente a las generalistas, concluyendo que las redes sociales específicas van ganando mayor protagonismo con el paso del tiempo. Además, se habla sobre la crítica de las redes sociales desde el punto de vista del usuario de la red, donde se resalta el tema de la administración de la publicidad y la privatización que han supuesto las redes sociales. Posteriormente se presenta una base teórica sobre las herramientas antes mencionadas, los CMS. Se explica su funcionamiento, clasificación y las ventajas que obtenemos con el uso de este software en nuestros proyectos, de los cuales destacan el corto tiempo de desarrollo y el bajo coste. Al final se eligen los CMS de estudio en este proyecto principalmente en base a tres criterios: licencia, cuota de uso y características de red social. En la segunda parte del proyecto se habla acerca de los CMS elegidos: WordPress con su plugin BuddyPress, Elgg, y Joomla con su plugin JomSocial. Se explican las características de cada uno de ellos y se muestran ejemplos de redes sociales reales hechas con estos CMS. En esta parte del proyecto se hace un uso práctico de estos CMS y se detalla paso a paso todo el proceso de creación de una red social (instalación, configuración y personalización de la red social) para cada CMS. El resultado son tres redes sociales hechas con distintos CMS, de los cuales se hace una valoración en base a la experiencia obtenida con el uso de los mismos, concluyéndose que JomSocial es una buena opción para redes sociales de uso generalista, pero para redes específicas son mejores tanto Elgg como BuddyPress, presentando este último una ligera ventaja por tener una gran comunidad en español. ABSTRACT. Nowadays social networks are widely used throughout the world, there are different types of social networks where you can connect with friends, expand your network of professional contacts, learn new things, etc. Its high usage has turned them into one of the most profitable businesses on Internet generating fortunes to its developers, mainly through advertising. Many social networks are developed by companies that count on an expert team, but many others have been created by ordinary people, with low computer skills, many of them motivated in their hobbies or careers, that did not find anything useful on Internet and decide to develop their own social networks with the help of software tools. One of those tools is a content management system (CMS), which will help us to save a lot of development time and we will not need to invest large amounts of money. This project is, mainly, about how to create social networks using these tools and aims to be clear enough to help anyone, regardless of their computer skills, to develop their ideas. The first part of the project is about social networks in general and the impact on today's society, where we can see that, due to the number of social networks and mobile accessibility, the use of social networks is daily. Also it explains some ways to obtain economic benefits from a social network and the advantages of specific social networks against generalist social networks, concluding that specific social networks are gaining more prominence with the passage of time. In addition, it refers on social networks critique from the point of view of social network users, where it highlights the issue of the advertising administration and privatization which have brought social networks. Subsequently, it presents a theoretical base of the above mentioned tools, CMS. Explains their operation, classification and the advantages we get with the use of this software in our projects, where the short development time and lower cost are highlighted. At the end the CMS studied in this project are chosen mainly based on three criteria: license, community size and social network features. The second part of the project is about the chosen CMS: WordPress with its plugin BuddyPress, Elgg, and Joomla with its plugin JomSocial. It explains features of all of them and shows examples of real social networks developed with these CMS. This part of the project is a practical use of these CMS and detailed step by step throughout the process of creating a social network (installation, configuration and customization of the social network) for each CMS. The result are three social networks made with different CMS, from which is made an assessment on the basis of the experience gained with the use of these software, concluding that JomSocial is a good choice to develop generalist social networks, but for specific social networks are better Elgg and BuddyPress, presenting the latter a slight advantage by having a large community in Spanish.

A Ground-Truth Video Dataset for the Development and Evaluation of Vision-based Sense-and-Avoid systems

The importance of vision-based systems for Sense-and-Avoid is increasing nowadays as remotely piloted and autonomous UAVs become part of the non-segregated airspace. The development and evaluation of these systems demand flight scenario images which are expensive and risky to obtain. Currently Augmented Reality techniques allow the compositing of real flight scenario images with 3D aircraft models to produce useful realistic images for system development and benchmarking purposes at a much lower cost and risk. With the techniques presented in this paper, 3D aircraft models are positioned firstly in a simulated 3D scene with controlled illumination and rendering parameters. Realistic simulated images are then obtained using an image processing algorithm which fuses the images obtained from the 3D scene with images from real UAV flights taking into account on board camera vibrations. Since the intruder and camera poses are user-defined, ground truth data is available. These ground truth annotations allow to develop and quantitatively evaluate aircraft detection and tracking algorithms. This paper presents the software developed to create a public dataset of 24 videos together with their annotations and some tracking application results.

Sobre el comportamiento de micropilotes trabajando a flexión y/o cortante en estructuras de tierra

El empleo de los micropilotes en la ingeniería civil ha revolucionado las técnicas de estabilización de terraplenes a media ladera, ya que aunque los pilotes pueden ser la opción más económica, el uso de micropilotes permite llegar a sitios inaccesibles con menor coste de movimientos de tierras, realización de plataformas de trabajo de dimensiones reducidas, maquinaria necesaria es mucho más pequeña, liviana y versátil en su uso, incluyendo la posibilidad de situar la fabricación de morteros o lechadas a distancias de varias decenas de metros del elemento a ejecutar. Sin embargo, realizando una revisión de la documentación técnica que se tiene en el ámbito ingenieril, se comprobó que los sistemas de diseño de algunos casos (micropilotes en terraplenes a media ladera, micropilotes en pantallas verticales, micropilotes como “paraguas” en túneles, etc.) eran bastante deficientes o poco desarrollados. Premisa que permite concluir que el constructor ha ido por delante (como suele ocurrir en ingeniería geotécnica) del cálculo o de su análisis teórico. Del mismo modo se determinó que en su mayoría los micropilotes se utilizan en labores de recalce o como nueva solución de cimentación en condiciones de difícil acceso, casos en los que el diseño de los micropilotes viene definido por cargas axiales, de compresión o de tracción, consideraciones que se contemplan en reglamentaciones como la “Guía para el proyecto y la ejecución de micropilotes en obras de carretera” del Ministerio de Fomento. En los micropilotes utilizados para estabilizar terraplenes a media ladera y micropilotes actuando como muros pantalla, en los que éstos trabajan a esfuerzo cortante y flexión, no se dispone de sistemas de análisis fiables o no se introduce adecuadamente el problema de interacción terreno-micropilote. Además en muchos casos, los parámetros geotécnicos que se utilizan no tienen una base técnico-teórica adecuada por lo que los diseños pueden quedar excesivamente del lado de la seguridad, en la mayoría de los casos, o todo lo contrario. Uno de los objetivos principales de esta investigación es estudiar el comportamiento de los micropilotes que están sometidos a esfuerzos de flexión y cortante, además de otros objetivos de gran importancia que se describen en el apartado correspondiente de esta tesis. Cabe indicar que en este estudio no se ha incluido el caso de micropilotes quasi-horizontales trabajando a flexion (como los “paraguas” en túneles), por considerarse que estos tienen un comportamiento y un cálculo diferente, que está fuera del alcance de esta investigación. Se ha profundizado en el estudio del empleo de micropilotes en taludes, presentando casos reales de obras ejecutadas, datos estadísticos, problemas de diseño y ejecución, métodos de cálculo simplificados y modelación teórica en cada caso, efectuada mediante el empleo de elementos finitos con el Código Plaxis 2D. Para llevar a cabo los objetivos que se buscan con esta investigación, se ha iniciado con el desarrollo del “Estado del Arte” que ha permitido establecer tipología, aplicaciones, características y cálculo de los micropilotes que se emplean habitualmente. Seguidamente y a efectos de estudiar el problema dentro de un marco geotécnico real, se ha seleccionado una zona española de actuación, siendo ésta Andalucía, en la que se ha utilizado de manera muy importante la técnica de micropilotes sobre todo en problemas de estabilidad de terraplenes a media ladera. A partir de ahí, se ha realizado un estudio de las propiedades geotécnicas de los materiales (principalmente suelos y rocas muy blandas) que están presentes en esta zona geográfica, estudio que ha sido principalmente bibliográfico o a partir de la experiencia en la zona del Director de esta tesis. Del análisis realizado se han establecido ordenes de magnitud de los parámetros geotécnicos, principalmente la cohesión y el ángulo de rozamiento interno (además del módulo de deformación aparente o de un módulo de reacción lateral equivalente) para los diversos terrenos andaluces. Con el objeto de conocer el efecto de la ejecución de un micropilote en el terreno (volumen medio real del micropilote, una vez ejecutado; efecto de la presión aplicada en las propiedades del suelo circundante, etc.) se ha realizado una encuesta entre diversas empresas españolas especializadas en la técnica de los micropilotes, a efectos de controlar los volúmenes de inyección y las presiones aplicadas, en función de la deformabilidad del terreno circundante a dichos micropilotes, con lo que se ha logrado definir una rigidez a flexión equivalente de los mismos y la definición y características de una corona de terreno “mejorado” lograda mediante la introducción de la lechada y el efecto de la presión alrededor del micropilote. Con las premisas anteriores y a partir de los parámetros geotécnicos determinados para los terrenos andaluces, se ha procedido a estudiar la estabilidad de terraplenes apoyados sobre taludes a media ladera, mediante el uso de elementos finitos con el Código Plaxis 2D. En el capítulo 5. “Simulación del comportamiento de micropilotes estabilizando terraplenes”, se han desarrollado diversas simulaciones. Para empezar se simplificó el problema simulando casos similares a algunos reales en los que se conocía que los terraplenes habían llegado hasta su situación límite (de los que se disponía información de movimientos medidos con inclinómetros), a partir de ahí se inició la simulación de la inestabilidad para establecer el valor de los parámetros de resistencia al corte del terreno (mediante un análisis retrospectivo – back-análisis) comprobando a su vez que estos valores eran similares a los deducidos del estudio bibliográfico. Seguidamente se han introducido los micropilotes en el borde de la carretera y se ha analizado el comportamiento de éstos y del talud del terraplén (una vez construidos los micropilotes), con el objeto de establecer las bases para su diseño. De este modo y adoptando los distintos parámetros geotécnicos establecidos para los terrenos andaluces, se simularon tres casos reales (en Granada, Málaga y Ceuta), comparando los resultados de dichas simulaciones numéricas con los resultados de medidas reales de campo (desplazamientos del terreno, medidos con inclinómetros), obteniéndose una reproducción bastante acorde a los movimientos registrados. Con las primeras simulaciones se concluye que al instalar los micropilotes la zona más insegura de la ladera es la de aguas abajo. La superficie de rotura ya no afecta a la calzada que protegen los micropilotes. De ahí que se deduzca que esta solución sea válida y se haya aplicado masivamente en Andalucía. En esas condiciones, podría decirse que no se está simulando adecuadamente el trabajo de flexión de los micropilotes (en la superficie de rotura, ya que no les corta), aunque se utilicen elementos viga. Por esta razón se ha realizado otra simulación, basada en las siguientes hipótesis: − Se desprecia totalmente la masa potencialmente deslizante, es decir, la que está por delante de la fila exterior de micros. − La estratigrafía del terreno es similar a la considerada en las primeras simulaciones. − La barrera de micropilotes está constituida por dos elementos inclinados (uno hacia dentro del terraplén y otro hacia fuera), con inclinación 1(H):3(V). − Se puede introducir la rigidez del encepado. − Los micros están separados 0,556 m ó 1,00 m dentro de la misma alineación. − El empotramiento de los micropilotes en el sustrato resistente puede ser entre 1,5 y 7,0 m. Al “anular” el terreno que está por delante de los micropilotes, a lo largo del talud, estos elementos empiezan claramente a trabajar, pudiendo deducirse los esfuerzos de cortante y de flexión que puedan actuar sobre ellos (cota superior pero prácticamente muy cerca de la solución real). En esta nueva modelación se ha considerado tanto la rigidez equivalente (coeficiente ϴ) como la corona de terreno tratado concéntrico al micropilote. De acuerdo a esto último, y gracias a la comparación de estas modelaciones con valores reales de movimientos en laderas instrumentadas con problemas de estabilidad, se ha verificado que existe una similitud bastante importante entre los valores teóricos obtenidos y los medidos en campo, en relación al comportamiento de los micropilotes ejecutados en terraplenes a media ladera. Finalmente para completar el análisis de los micropilotes trabajando a flexión, se ha estudiado el caso de micropilotes dispuestos verticalmente, trabajando como pantallas discontinuas provistas de anclajes, aplicado a un caso real en la ciudad de Granada, en la obra “Hospital de Nuestra Señora de la Salud”. Para su análisis se utilizó el código numérico CYPE, basado en que la reacción del terreno se simula con muelles de rigidez Kh o “módulo de balasto” horizontal, introduciendo en la modelación como variables: a) Las diferentes medidas obtenidas en campo; b) El espesor de terreno cuaternario, que por lo que se pudo determinar, era variable, c) La rigidez y tensión inicial de los anclajes. d) La rigidez del terreno a través de valores relativos de Kh, recopilados en el estudio de los suelos de Andalucía, concretamente en la zona de Granada. Dicha pantalla se instrumentó con 4 inclinómetros (introducidos en los tubos de armadura de cuatro micropilotes), a efectos de controlar los desplazamientos horizontales del muro de contención durante las excavaciones pertinentes, a efectos de comprobar la seguridad del conjunto. A partir del modelo de cálculo desarrollado, se ha comprobado que el valor de Kh pierde importancia debido al gran número de niveles de anclajes, en lo concerniente a las deformaciones horizontales de la pantalla. Por otro lado, los momentos flectores son bastante sensibles a la distancia entre anclajes, al valor de la tensión inicial de los mismos y al valor de Kh. Dicho modelo también ha permitido reproducir de manera fiable los valores de desplazamientos medidos en campo y deducir los parámetros de deformabilidad del terreno, Kh, con valores del orden de la mitad de los medidos en el Metro Ligero de Granada, pero visiblemente superiores a los deducibles de ábacos que permiten obtener Kh para suelos granulares con poca cohesión (gravas y cuaternario superior de Sevilla) como es el caso del ábaco de Arozamena, debido, a nuestro juicio, a la cementación de los materiales presentes en Granada. En definitiva, de las anteriores deducciones se podría pensar en la optimización del diseño de los micropilotes en las obras que se prevean ejecutar en Granada, con similares características al caso de la pantalla vertical arriostrada mediante varios niveles de anclajes y en las que los materiales de emplazamiento tengan un comportamiento geotécnico similar a los estudiados, con el consiguiente ahorro económico. Con todo ello, se considera que se ha hecho una importante aportación para el diseño de futuras obras de micropilotes, trabajando a flexión y cortante, en obras de estabilización de laderas o de excavaciones. Using micropiles in civil engineering has transformed the techniques of stabilization of embankments on the natural or artificial slopes, because although the piles may be the cheapest option, the use of micropiles can reach inaccessible places with lower cost of earthworks, carrying out small work platforms. Machinery used is smaller, lightweight and versatile, including the possibility of manufacturing mortars or cement grouts over distances of several tens of meters of the element to build. However, making a review of the technical documentation available in the engineering field, it was found that systems designed in some cases (micropiles in embankments on the natural slopes, micropiles in vertical cut-off walls, micropiles like "umbrella" in tunnels, etc.) were quite poor or underdeveloped. Premise that concludes the builder has gone ahead (as usually happen in geotechnical engineering) of calculation or theoretical analysis. In the same way it was determined that most of the micropiles are used in underpinning works or as a new foundation solution in conditions of difficult access, in which case the design of micropiles is defined by axial, compressive or tensile loads, considered in regulations as the " Handbook for the design and execution of micropiles in road construction" of the Ministry of Development. The micropiles used to stabilize embankments on the slopes and micropiles act as retaining walls, where they work under shear stress and bending moment, there are not neither reliable systems analysis nor the problem of soil-micropile interaction are properly introduced. Moreover, in many cases, the geotechnical parameters used do not have a proper technical and theoretical basis for what designs may be excessively safe, or the opposite, in most cases. One of the main objectives of this research is to study the behavior of micro piles which are subjected to bending moment and shear stress, as well as other important objectives described in the pertinent section of this thesis. It should be noted that this study has not included the case of quasi-horizontal micropiles working bending moment (as the "umbrella" in tunnels), because it is considered they have a different behavior and calculation, which is outside the scope of this research. It has gone in depth in the study of using micropiles on slopes, presenting real cases of works made, statistics, problems of design and implementation, simplified calculation methods and theoretical modeling in each case, carried out by using FEM (Finite Element Method) Code Plaxis 2D. To accomplish the objectives of this research, It has been started with the development of the "state of the art" which stipulate types, applications, characteristics and calculation of micropiles that are commonly used. In order to study the problem in a real geotechnical field, it has been selected a Spanish zone of action, this being Andalusia, in which it has been used in a very important way, the technique of micropiles especially in embankments stability on natural slopes. From there, it has made a study of the geotechnical properties of the materials (mainly very soft soils and rocks) that are found in this geographical area, which has been mainly a bibliographic study or from the experience in the area of the Director of this thesis. It has been set orders of magnitude of the geotechnical parameters from analyzing made, especially the cohesion and angle of internal friction (also apparent deformation module or a side reaction module equivalent) for various typical Andalusian ground. In order to determine the effect of the implementation of a micropile on the ground (real average volume of micropile once carried out, effect of the pressure applied on the properties of the surrounding soil, etc.) it has conducted a survey among various skilled companies in the technique of micropiles, in order to control injection volumes and pressures applied, depending on the deformability of surrounding terrain such micropiles, whereby it has been possible to define a bending stiffness and the definition and characteristics of a crown land "improved" achieved by introducing the slurry and the effect of the pressure around the micropile. With the previous premises and from the geotechnical parameters determined for the Andalusian terrain, we proceeded to study the stability of embankments resting on batters on the slope, using FEM Code Plaxis 2D. In the fifth chapter "Simulation of the behavior of micropiles stabilizing embankments", there were several different numerical simulations. To begin the problem was simplified simulating similar to some real in which it was known that the embankments had reached their limit situation (for which information of movements measured with inclinometers were available), from there the simulation of instability is initiated to set the value of the shear strength parameters of the ground (by a retrospective analysis or back-analysis) checking these values were similar to those deduced from the bibliographical study Then micropiles have been introduced along the roadside and its behavior was analyzed as well as the slope of embankment (once micropiles were built ), in order to establish the basis for its design. In this way and taking the different geotechnical parameters for the Andalusian terrain, three real cases (in Granada, Malaga and Ceuta) were simulated by comparing the results of these numerical simulations with the results of real field measurements (ground displacements measured with inclinometers), getting quite consistent information according to registered movements. After the first simulations it has been concluded that after installing the micropiles the most insecure area of the natural slope is the downstream. The failure surface no longer affects the road that protects micropiles. Hence it is inferred that this solution is acceptable and it has been massively applied in Andalusia. Under these conditions, one could say that it is not working properly simulating the bending moment of micropiles (on the failure surface, and that does not cut them), although beam elements are used. Therefore another simulation was performed based on the following hypotheses: − The potentially sliding mass is totally neglected, that is, which is ahead of the outer row of micropiles. − Stratigraphy field is similar to the one considered in the first simulations. − Micropiles barrier is constituted by two inclined elements (one inward and one fill out) with inclination 1 (H): 3 (V). − You can enter the stiffness of the pile cap. − The microlies lines are separated 0.556 m or 1.00 m in the same alignment. − The embedding of the micropiles in the tough substrate can be between 1.5 and 7.0 m. To "annul" the ground that is in front of the micro piles, along the slope, these elements clearly start working, efforts can be inferred shear stress and bending moment which may affect them (upper bound but pretty close to the real) solution. In this new modeling it has been considered both equivalent stiffness coefficient (θ) as the treated soil crown concentric to the micropile. According to the latter, and by comparing these values with real modeling movements on field slopes instrumented with stability problems, it was verified that there is quite a significant similarity between the obtained theoretical values and the measured field in relation to the behavior of micropiles executed in embankments along the natural slope. Finally to complete the analysis of micropiles working in bending conditions, we have studied the case of micropiles arranged vertically, working as discontinued cut-off walls including anchors, applied to a real case in the city of Granada, in the play "Hospital of Our Lady of the Health ". CYPE numeric code, based on the reaction of the ground is simulated spring stiffness Kh or "subgrade" horizontal, introduced in modeling was used as variables for analysis: a) The different measurements obtained in field; b) The thickness of quaternary ground, so that could be determined, was variable, c) The stiffness and the prestress of the anchors. d) The stiffness of the ground through relative values of Kh, collected in the study of soils in Andalusia, particularly in the area of Granada. (previously study of the Andalusia soils) This cut-off wall was implemented with 4 inclinometers (introduced in armor tubes four micropiles) in order to control the horizontal displacements of the retaining wall during the relevant excavations, in order to ensure the safety of the whole. From the developed model calculation, it was found that the value of Kh becomes less important because a large number of anchors levels, with regard to the horizontal deformation of the cut-off wall. On the other hand, the bending moments are quite sensitive to the distance between anchors, the initial voltage value thereof and the value of Kh. This model has also been reproduced reliably displacement values measured in the field and deduce parameters terrain deformability, Kh, with values around half the measured Light Rail in Granada, but visibly higher than deductible of abacuses which can obtain Kh for granular soils with low cohesion (upper Quaternary gravels and Sevilla) such as Abacus Arozamena, because, in our view, to cementing materials in Granada. In short, previous deductions you might think on optimizing the design of micropiles in the works that are expected to perform in Granada, with similar characteristics to the case of the vertical cut-off wall braced through several levels of anchors and in which materials location have a geotechnical behavior similar to those studied, with the consequent economic savings. With all this, it is considered that a significant contribution have been made for the design of future works of micropiles, bending moment and shear stress working in slope stabilization works or excavations.

New QR Survey Methodologies to Analyze User Perception of Service Quality in Public Transport: The Experience of Madrid

Customer Satisfaction Surveys (CSS) have become an important tool for public transport planners, as improvements in the perceived quality of service lead to greater use of public transport and lower traffic pollution. Until now, Intelligent Transportation System (ITS) enhancements in public transport have traditionally included fleet management systems based on Automatic Vehicle Location (AVL) technologies, which can be used to optimize routing and scheduling, and to feed real-time information into passenger information channels. However, surveys of public transport users could also benefit from the new information technologies. As most customers carry their smartphones when traveling, Quick Response (QR) codes open up the possibility of conducting these surveys at a lower cost.This paper contributes to the limited existing literature by developing the analysis of QR codes applied to CSS in public transport and highlighting their importance in reducing the cost of data collection and processing. The added value of this research is that it provides the first assessment of a real case study in Madrid (Spain) using QR codes for this purpose. This pilot experience was part of a research project analyzing bus service quality in the same case study, so the QR code survey (155 valid questionnaires) was validated using a conventional face-to-face survey (520 valid questionnaires). The results show clearly that, after overcoming a few teething troubles, this QR code application will ultimately provide transport management with a useful tool to reduce survey costs

Arquitectura de supercomputación en la nube para la resolución de problemas de optimización combinatoria

La tesis está focalizada en la resolución de problemas de optimización combinatoria, haciendo uso de las opciones tecnológicas actuales que ofrecen las tecnologías de la información y las comunicaciones, y la investigación operativa. Los problemas de optimización combinatoria se resuelven en general mediante programación lineal y metaheurísticas. La aplicación de las técnicas de resolución de los problemas de optimización combinatoria requiere de una elevada carga computacional, y los algoritmos deben diseñarse, por un lado pensando en la efectividad para encontrar buenas soluciones del problema, y por otro lado, pensando en un uso adecuado de los recursos informáticos disponibles. La programación lineal y las metaheurísticas son técnicas de resolución genéricas, que se pueden aplicar a diferentes problemas, partiendo de una base común que se particulariza para cada problema concreto. En el campo del desarrollo de software, los frameworks cumplen esa función de comenzar un proyecto con el trabajo general ya disponible, con la opción de cambiar o extender ese comportamiento base o genérico, para construir el sistema concreto, lo que permite reducir el tiempo de desarrollo, y amplía las posibilidades de éxito del proyecto. En esta tesis se han desarrollado dos frameworks de desarrollo. El framework ILP permite modelar y resolver problemas de programación lineal, de forma independiente al software de resolución de programación lineal que se utilice. El framework LME permite resolver problemas de optimización combinatoria mediante metaheurísticas. Tradicionalmente, las aplicaciones de resolución de problemas de optimización combinatoria son aplicaciones de escritorio que permiten gestionar toda la información de entrada del problema y resuelven el problema en local, con los recursos hardware disponibles. Recientemente ha aparecido un nuevo paradigma de despliegue y uso de aplicaciones que permite compartir recursos informáticos especializados por Internet. Esta nueva forma de uso de recursos informáticos es la computación en la nube, que presenta el modelo de software como servicio (SaaS). En esta tesis se ha construido una plataforma SaaS, para la resolución de problemas de optimización combinatoria, que se despliega sobre arquitecturas compuestas por procesadores multi-núcleo y tarjetas gráficas, y dispone de algoritmos de resolución basados en frameworks de programación lineal y metaheurísticas. Toda la infraestructura es independiente del problema de optimización combinatoria a resolver, y se han desarrollado tres problemas que están totalmente integrados en la plataforma SaaS. Estos problemas se han seleccionado por su importancia práctica. Uno de los problemas tratados en la tesis, es el problema de rutas de vehículos (VRP), que consiste en calcular las rutas de menor coste de una flota de vehículos, que reparte mercancías a todos los clientes. Se ha partido de la versión más clásica del problema y se han hecho estudios en dos direcciones. Por un lado se ha cuantificado el aumento en la velocidad de ejecución de la resolución del problema en tarjetas gráficas. Por otro lado, se ha estudiado el impacto en la velocidad de ejecución y en la calidad de soluciones, en la resolución por la metaheurística de colonias de hormigas (ACO), cuando se introduce la programación lineal para optimizar las rutas individuales de cada vehículo. Este problema se ha desarrollado con los frameworks ILP y LME, y está disponible en la plataforma SaaS. Otro de los problemas tratados en la tesis, es el problema de asignación de flotas (FAP), que consiste en crear las rutas de menor coste para la flota de vehículos de una empresa de transporte de viajeros. Se ha definido un nuevo modelo de problema, que engloba características de problemas presentados en la literatura, y añade nuevas características, lo que permite modelar los requerimientos de las empresas de transporte de viajeros actuales. Este nuevo modelo resuelve de forma integrada el problema de definir los horarios de los trayectos, el problema de asignación del tipo de vehículo, y el problema de crear las rotaciones de los vehículos. Se ha creado un modelo de programación lineal para el problema, y se ha resuelto por programación lineal y por colonias de hormigas (ACO). Este problema se ha desarrollado con los frameworks ILP y LME, y está disponible en la plataforma SaaS. El último problema tratado en la tesis es el problema de planificación táctica de personal (TWFP), que consiste en definir la configuración de una plantilla de trabajadores de menor coste, para cubrir una demanda de carga de trabajo variable. Se ha definido un modelo de problema muy flexible en la definición de contratos, que permite el uso del modelo en diversos sectores productivos. Se ha definido un modelo matemático de programación lineal para representar el problema. Se han definido una serie de casos de uso, que muestran la versatilidad del modelo de problema, y permiten simular el proceso de toma de decisiones de la configuración de una plantilla de trabajadores, cuantificando económicamente cada decisión que se toma. Este problema se ha desarrollado con el framework ILP, y está disponible en la plataforma SaaS. ABSTRACT The thesis is focused on solving combinatorial optimization problems, using current technology options offered by information technology and communications, and operations research. Combinatorial optimization problems are solved in general by linear programming and metaheuristics. The application of these techniques for solving combinatorial optimization problems requires a high computational load, and algorithms are designed, on the one hand thinking to find good solutions to the problem, and on the other hand, thinking about proper use of the available computing resources. Linear programming and metaheuristic are generic resolution techniques, which can be applied to different problems, beginning with a common base that is particularized for each specific problem. In the field of software development, frameworks fulfill this function that allows you to start a project with the overall work already available, with the option to change or extend the behavior or generic basis, to build the concrete system, thus reducing the time development, and expanding the possibilities of success of the project. In this thesis, two development frameworks have been designed and developed. The ILP framework allows to modeling and solving linear programming problems, regardless of the linear programming solver used. The LME framework is designed for solving combinatorial optimization problems using metaheuristics. Traditionally, applications for solving combinatorial optimization problems are desktop applications that allow the user to manage all the information input of the problem and solve the problem locally, using the available hardware resources. Recently, a new deployment paradigm has appeared, that lets to share hardware and software resources by the Internet. This new use of computer resources is cloud computing, which presents the model of software as a service (SaaS). In this thesis, a SaaS platform has been built for solving combinatorial optimization problems, which is deployed on architectures, composed of multi-core processors and graphics cards, and has algorithms based on metaheuristics and linear programming frameworks. The SaaS infrastructure is independent of the combinatorial optimization problem to solve, and three problems are fully integrated into the SaaS platform. These problems have been selected for their practical importance. One of the problems discussed in the thesis, is the vehicle routing problem (VRP), which goal is to calculate the least cost of a fleet of vehicles, which distributes goods to all customers. The VRP has been studied in two directions. On one hand, it has been quantified the increase in execution speed when the problem is solved on graphics cards. On the other hand, it has been studied the impact on execution speed and quality of solutions, when the problem is solved by ant colony optimization (ACO) metaheuristic, and linear programming is introduced to optimize the individual routes of each vehicle. This problem has been developed with the ILP and LME frameworks, and is available in the SaaS platform. Another problem addressed in the thesis, is the fleet assignment problem (FAP), which goal is to create lower cost routes for a fleet of a passenger transport company. It has been defined a new model of problem, which includes features of problems presented in the literature, and adds new features, allowing modeling the business requirements of today's transport companies. This new integrated model solves the problem of defining the flights timetable, the problem of assigning the type of vehicle, and the problem of creating aircraft rotations. The problem has been solved by linear programming and ACO. This problem has been developed with the ILP and LME frameworks, and is available in the SaaS platform. The last problem discussed in the thesis is the tactical planning staff problem (TWFP), which is to define the staff of lower cost, to cover a given work load. It has been defined a very rich problem model in the definition of contracts, allowing the use of the model in various productive sectors. It has been defined a linear programming mathematical model to represent the problem. Some use cases has been defined, to show the versatility of the model problem, and to simulate the decision making process of setting up a staff, economically quantifying every decision that is made. This problem has been developed with the ILP framework, and is available in the SaaS platform.

Vivienda y fondo edificatorio: análisis de las consecuencias del parámetro fondo en el edificio de vivienda colectiva

Este estudio ofrece una herramienta de aproximación al espacio morfológico-métrico en el que se formula la ciudad de alta densidad desde la vivienda colectiva. La vivienda colectiva es la célula básica de la ciudad. El estudio configurativo y dimensional del tejido urbano muestra la importancia del fondo edificatorio como parámetro clave a mitad de camino entre la vivienda y la ciudad. El fondo edificatorio traza el margen de la arquitectura en la ciudad y desde él se equipa y cuantifica el territorio urbano. Sus dinámicas van caracterizando los distintos entornos, mientras en su interior se formula el tipo en un ajuste de continua verificación y adaptación. La forma de la ciudad y sus distintas posibilidades configurativas —en cuanto masa construida y espacio público, pero sin perder de vista la relación entre ambos— depende en gran medida del fondo edificatorio. Se trata, por tanto, de un parámetro importante de relación entre las distintas configuraciones del espacio exterior e interior. Al proyectar, una vez establecido un fondo, algunas propiedades se adaptan con facilidad mientras que otras requieren un cierto grado de interpretación o deben ser descartadas. Dada una superficie, la especificación del fondo fuerza la dimensión del frente en las configuraciones posibles. Ambas dimensiones son vitales en el valor del factor de forma del continuo edificado y en su relación se produce el complejo rango de posibilidades. Partiendo de la ciudad, un gran fondo encierra y mezcla en su interior todo tipo de usos sin distinción, repercute un menor coste por unidad de superficie edificada y comparte su frente reduciendo los intercambios térmicos y lumínicos. Sin embargo la ciudad de fondo reducido ajusta la forma al uso y se desarrolla linealmente con repetitividad a lo largo de sus frentes exteriores. En ella, el fuerte intercambio energético se opone a las grandes posibilidades del espacio libre. En cambio desde la casa las distintas medidas del fondo se producen bajo determinados condicionantes: clima, compacidad, ocupación, hibridación, tamaño de casa, etc., mientras que el tipo se desarrolla en base a una métrica afín. Este trabajo parte de esta dialéctica. Estudia la relación de dependencia entre las condiciones del edificio de viviendas y su métrica. Jerarquiza edificios en base al parámetro “fondo” para constituir una herramienta que como un ábaco sea capaz de visibilizar las dinámicas relacionales entre configuración y métrica bajo la condición de alta densidad. Para ello en una primera fase se gestiona una extensa muestra de edificios representativos de vivienda colectiva principalmente europea, extraída de tres prestigiosos libros en forma de repertorio. Se ordenan y categorizan extrayendo datos conmensurables y temas principales que ligan la profundidad de la huella a la morfología y posteriormente, esta información se estudia en diagramas que ponen de manifiesto convergencias y divergencias, acumulaciones y vacíos, límites, intervalos característicos, márgenes y ejes, parámetros y atributos... cuya relación trata de factorizar el lugar morfológico y métrico de la casa como metavivienda y ciudad. La herramienta se establece así como un complejo marco relacional en el que posicionar casos concretos y trazar nexos transversales, tanto de tipo morfológico como cultural, climático o técnico, normativo o tecnológico. Cada nuevo caso o traza añadida produce consonancias y disonancias en el marco que requieren interpretación y verificación. De este modo este instrumento de análisis comparativo se tempera, se especializa, se completa y se perfecciona con su uso. La forma de la residencia en la ciudad densa se muestra así sobre un subsistema morfológico unitario y su entendimiento se hace más fácilmente alcanzable y acumulable tanto para investigaciones posteriores como para el aprendizaje o el ejercicio profesional. ABSTRACT This research study offers a tool to approach the morphometric space in which (multi-family) housing defines high-density cities. Multi-family housing is the basic cell of the city. The configuration and dimension studies of the urban fabric render the importance of building depth as a key parameter half way between the dwelling and the city. The building depth traces de limit of architecture in the city. It qualifies and quantifies the urban territory. Its dynamics characterize the different environments while in its essence, an adjustment process of continuous verification and adaption defines type. The shape of the city and its different configuration possibilities —in terms of built fabric and public space, always keeping an eye on the relationship between them— depend majorly on the building depth. Therefore, it is a relevant parameter that relates the diverse configurations between interior and exterior space. When designing, once the depth is established, some properties are easily adpated. However, others require a certain degree of interpretation or have to be left out of the study. Given a ceratin surface, the establishment of the depth forces the dimensions of the facade in the different configurations. Both depth and facade dimensions are crucial for the form factor of the built mass. Its relationship produces a complex range of possibilities. From an urban point of view, great depth means multiple uses (making no distinction whatsoever,) it presents a lower cost per unit of built area and shares its facade optimizing temperature and light exchange. On the contrary, the city of reduced depth adjusts its shape to the use, and develops linearly and repetitively along its facades. The strong energy exchange opposes to the great possibilities of free space. From the perspective of the dwelling, the different dimensions of depth are produced under certain determinants: climate, compactness, occupancy, hybridization, dwelling size, etc. Meanwhile, the type is developed based on a related meter (as in poetry). This work starts from the previous premise. It studies the dependency relation bewteen the conditions of the dwellings and their meter (dimensions). It organizes buildings hierarchically based on the parameter “depth” to create a tool that, as an abacus, is able to visibilise the relational dynamics between configuration and dimension in high density conditions. For this, in the first stage a large group of representative multi-family housing buildings is managed, mostly from Europe, picked from three prestigious books as a repertoir. They are categorized and ordered drawing commensurable data and key issues that link the depth of the fooprint to its morphology. Later, this information is studied deeply with diagrams that bring out connections and discrepancies, voids and accumulations, limits, charasteristic intervals, margins and axii, parameters, attributes, etc. These relationships try to create factors from a morphological and metrical point of view of the house as a metadwelling. This tool is established as a complex relation frame in which case studies are postitioned and cross-cutting nexii are traced. These can deal with morphology, climate, technique, law or technology. Each new case or nexus produces affinities and discrepancies that require interpretation and verification. Thus, this instrument of comparative analysis is fine-tuned, especialized and completed as its use is improved. The way housing is understood in high density cities is shown as a unitary metric subsystem and its understanding is easy to reach and accumulate for future researchers, students or practicing architects.

Prototipos experimentales modernos: la colonia de Schorlemerallee y las villas Am Rupenhorn de los Luckhardt y Anker. Berlín 1924-1930

La colonia experimental de Schorlemerallee y las villas Am Rupenhorn son dos proyectos concluidos en 1930 por los hermanos Wassili y Hans Luckhardt con Alfons Anker en Berlín. Ambos proyectos forman parte del mismo proceso, que comienza en la Colonia -una exploración sobre el lenguaje moderno en una serie de fases sucesivas- y culmina con las Villas. Éstas últimas, realizadas inmediatamente después de la Colonia, son la síntesis de esa experiencia, aunque finalmente acabaron trascendiéndola, ya que se convirtieron en un modelo sobre la casa en la naturaleza, sobre la idea de la villa clásica y sobre los nuevos modos de habitar, alcanzando con el tiempo la condición de canon moderno. A pesar de ello, no es esta condición lo más importante. Lo singular en este caso, es el propio proceso de proyecto –Colonia versus Villas- un verdadero experimento en su concepción, método y resultados, a través del cual sus autores investigan nuevas tecnologías aplicadas a nuevas formas de habitar y desarrollan un nuevo lenguaje, cuyo resultado son unos prototipos tecnológicos, con los que pretenden, como diría Mies van der Rohe: “Me he esforzado por construir una arquitectura para una sociedad tecnológica. He intentado que todo resultara razonable y claro.....para que cualquiera pueda hacer arquitectura.” El momento y lugar no pueden ser más propicios: Berlín entre 1924 y 1930, en el mismo origen del Movimiento Moderno. El experimento se plantea con auténtico rigor científico. Los arquitectos diseñan, construyen y financian su proyecto, controlando todas sus variables. Especialmente, por lo insólito, es el control de la variable económica. Porque este factor, la economía, es para ellos una clave fundamental del proceso. Se trataba de demostrar que la Nueva Arquitectura (o Neues Bauen, como les gustaba denominarla) era capaz de construir mejor y más rápido la vivienda para una nueva sociedad. La revolución y la vanguardia van de la mano: son el Zeitgeist o espíritu de la época, un contexto que es parte sustancial del proceso, y como lo calificarían los Smithson, un contexto heroico. El concepto se centra en la tríada Bauhaus: diseño + tecnología x economía. En cuanto al método, se fijan una serie de parámetros –las variables del experimento- que se agrupan en tres categorías distintas: topología, tipología y tecnología. La combinación de las variables de cada categoría dará lugar a un sistema con unas características determinadas: una definición del espacio, una forma, un lenguaje y una tecnología, características que permiten establecer las reglas para su desarrollo. Los sistemas resultantes son tres, denominados según su doble condición tipológica/ tecnológica: 1. Sistema de muro de carga: Viviendas adosadas en zig-zag o Mauerwerksbauten. 2. Sistema de esqueleto de acero: Viviendas aisladas o Stahlskelettbauten 3. Sistema de hormigón armado: Viviendas en hilera recta o Betonbauten Las villas Am Rupenhorn se plantean a continuación como verificación de este proceso: la síntesis de las categorías desarrolladas en la Colonia. Pero llegan en un momento de gracia, justo cuando los Luckhardt y Anker se encuentran profundamente implicados en el proceso de desarrollo de un nuevo lenguaje y con la reciente experiencia de la Colonia, que ha sido un éxito en casi todos los aspectos posibles. “En 1930, están en la cumbre”, como diría su mejor crítico y antiguo colaborador: Achim Wendschuh. En las Villas, los arquitectos integran su lenguaje, ya plenamente moderno, con sus experiencias previas: las que los relacionan con su reciente expresionismo (que se podría calificar como Kunstwollen) y con la tradición clásica de la cultura arquitectónica alemana: el sentido del material que deben a Semper y la sensibilidad hacia el paisaje, que toman de Schinkel. El extraordinario interés de las Villas se debe a factores como el tratamiento de la relación dual, poco habitual en la arquitectura moderna, la síntesis de lenguajes y las circunstancias de su momento histórico, factores que las han convertido en una propuesta única e irrepetible de una de las vías experimentales más interesantes y desconocidas de la Modernidad. ABSTRACT The experimental Housing Estate of Schorlemerallee and the Am Rupenhorn Villas are two projects completed by the brothers Wassili and Hans Luckhardt with Alfons Anker in Berlin in 1930. Both projects are part of the same process, starting with the Housing Estate --an exploration of the modern language in a series of phases- which culminates with the Villas project. The Villas Am Ruperhorn, designed immediately after the Housing development, are the synthesis and crowning point of this experience, even finally over passing it, since they have become a model of the house in nature, related with both the ideal of the classical villa and the new ways of life, reaching the condition of a modern canon. However, this is not its most important issue. The most remarkable condition is the project process itself -Housing versus Villas- a true experiment in concept, method and results, in which the authors research new technologies for new ways of living, developing an innovative language, with results in new prototypes, in the way Mies van der Rohe was looking for: “I have tried to make an architecture for a technological society. I have wanted to keep everything reasonable and clear… to have an architecture that anybody can do." The time and place could not be more favourable: Berlin from 1924 to 1930, in the very origin of Modern Movement. The experiment takes place with genuine scientific accuracy. Architects design, build and finance their own project, controlling all variables. Especially, and quite unusual, the control of the economic variable. Precisely the economic factor is for them a fundamental key to the process. It was shown to prove that the new architecture (or Neues Bauen, as they liked to call it) was able to build not only faster, better and more efficient dwellings for a new society, but also at lower cost. Revolution and Avant-garde use to move forward together, because they share the Zeitgeist --or time's spirit--, a context which is a substantial part of the process, and as the Alison & Peter Smithsons would describe, an heroic context. The concept focuses on the Bauhaus triad: Design + Technology x Economy. For the method, a number of variables are fixed --the experimental parameters-- that are later grouped into three distinct categories: Topology, Typology and Technology. The combination of these variables within each category gives way to several systems, with specific characteristics: a definition of space, a form, a language and a technology, thus allowing to establish the rules for its development: The resulting systems are three, called by double typological / technological issue: 1. Terraced Housing in zig-zag or Mauerwerksbauten (bearing wall system) 2. Detached Housing or Stahlskelettbauten (steel skeleton system) 3. Terraced Housing in one row or Betonbauten (reinforced concrete system) The Am Rupenhorn Villas are planned as the check of this process: the synthesis of the categories developed all through the Housing Estate research. The Am Ruperhorn project is developed in a crucial moment, just as the Luckhardts and Anker are deeply involved in the definition process of a new language after the recent experience of Schorlemerallee, which has been a success in almost all possible aspects. "In 1930, they are on the top” has said his best critic and long-time collaborator, Achim Wendschuh. In the Villas, the authors make up their fully modern language with their own background, related with their recent Expressionist trend (Kunstwollen) and with the classical tradition of the German architectural culture: the notion of material related with Semper and the sensible approach to the landscape, linked with Schinkel. Its extraordinary interest lay on diverse factors, such as dual relationships, unusual in modern architecture, synthesis of languages and circumstances of their historical moment, all factors that have become a unique and unrepeatable proposal in one of the most extraordinary experimental ways of Modernity.

Synthetic zeolites and other microporous oxide molecular sieves

Use of synthetic zeolites and other microporous oxides since 1950 has improved insulated windows, automobile air-conditioning, refrigerators, air brakes on trucks, laundry detergents, etc. Their large internal pore volumes, molecular-size pores, regularity of crystal structures, and the diverse framework chemical compositions allow “tailoring” of structure and properties. Thus, highly active and selective catalysts as well as adsorbents and ion exchangers with high capacities and selectivities were developed. In the petroleum refining and petrochemical industries, zeolites have made possible cheaper and lead-free gasoline, higher performance and lower-cost synthetic fibers and plastics, and many improvements in process efficiency and quality and in performance. Zeolites also help protect the environment by improving energy efficiency, reducing automobile exhaust and other emissions, cleaning up hazardous wastes (including the Three Mile Island nuclear power plant and other radioactive wastes), and, as specially tailored desiccants, facilitating the substitution of new refrigerants for the ozone-depleting chlorofluorocarbons banned by the Montreal Protocol.

Expression of Norwalk virus capsid protein in transgenic tobacco and potato and its oral immunogenicity in mice.

Alternatives to cell culture systems for production of recombinant proteins could make very safe vaccines at a lower cost. We have used genetically engineered plants for expression of candidate vaccine antigens with the goal of using the edible plant organs for economical delivery of oral vaccines. Transgenic tobacco and potato plants were created that express the capsid protein of Norwalk virus, a calicivirus that causes epidemic acute gastroenteritis in humans. The capsid protein could be extracted from tobacco leaves in the form of 38-nm Norwalk virus-like particles. Recombinant Norwalk virus-like particle (rNV) was previously recovered when the same gene was expressed in recombinant baculovirus-infected insect cells. The capsid protein expressed in tobacco leaves and potato tubers cosedimented in sucrose gradients with insect cell-derived rNV and appeared identical to insect cell-derived rNV on immunoblots of SDS/polyacrylamide gels. The plant-expressed rNV was orally immunogenic in mice. Extracts of tobacco leaf expressing rNV were given to CD1 mice by gavage, and the treated mice developed both serum IgG and secretory IgA specific for rNV. Furthermore, when potato tubers expressing rNV were fed directly to mice, they developed serum IgG specific for rNV. These results indicate the potential usefulness of plants for production and delivery of edible vaccines. This is an appropriate technology for developing countries where vaccines are urgently needed.

The Modelling of Photovoltaic, Solar Thermal, and Photovoltaic/Thermal Domestic Hot Water Systems

Solar heating of potable water has traditionally been accomplished through the use of solar thermal (ST) collectors. With the recent increases in availability and lower cost of photovoltaic (PV) panels, the potential of coupling PV solar arrays to electrically heated domestic hot water (DHW) tanks has been considered. Additionally, innovations in the SDHW industry have led to the creation of photovoltaic/thermal (PV/T) collectors, which heat water using both electrical and thermal energy. The current work compared the performance and cost-effectiveness of a traditional solar thermal (ST) DHW system to PV-solar-electric DHW systems and a PV/T DHW system. To accomplish this, a detailed TRNSYS model of the solar hot water systems was created and annual simulations were performed for 250 L/day and 325 L/day loads in Toronto, Vancouver, Montreal, Halifax, and Calgary. It was shown that when considering thermal performance, PV-DHW systems were not competitive when compared to ST-DHW and PVT-DHW systems. As an example, for Toronto the simulated annual solar fractions of PV-DHW systems were approximately 30%, while the ST-DHW and PVT-DHW systems achieved 65% and 71% respectively. With current manufacturing and system costs, the PV-DHW system was the most cost-effective system for domestic purposes. The capital cost of the PV-DHW systems were approximately $1,923-$2,178 depending on the system configuration, and the ST-DHW and PVT system were estimated to have a capital cost of $2,288 and $2,373 respectively. Although the capital cost of the PVT-DHW system was higher than the other systems, a Present Worth analysis for a 20-year period showed that for a 250 L/day load in Toronto the Present Worth of the PV/T system was approximately $4,597, with PV-DHW systems costing approximately $7,683-$7,816 and the ST-DHW system costing $5,238.

Synthesis, Modification, and Application of Siloxane Materials for Environmental Sensing

As human populations and resource consumption increase, it is increasingly important to monitor the quality of our environment. While laboratory instruments offer useful information, portable, easy to use sensors would allow environmental analysis to occur on-site, at lower cost, and with minimal operator training. We explore the synthesis, modification, and applications of modified polysiloxane in environmental sensing. Multiple methods of producing modified siloxanes were investigated. Oligomers were formed by using functionalized monomers, producing siloxane materials containing silicon hydride, methyl, and phenyl side chains. Silicon hydride-functionalized oligomers were further modified by hydrosilylation to incorporate methyl ester and naphthyl side chains. Modifications to the siloxane materials were also carried out using post-curing treatments. Methyl ester-functionalized siloxane was incorporated into the surface of a cured poly(dimethylsiloxane) film by siloxane equilibration. The materials containing methyl esters were hydrolyzed to reveal carboxylic acids, which could later be used for covalent protein immobilization. Finally, the siloxane surfaces were modified to incorporate antibodies by covalent, affinity, and adsorption-based attachment. These modifications were characterized by a variety of methods, including contact angle, attenuated total reflectance Fourier transform infrared spectroscopy, dye labels, and 1H nuclear magnetic resonance spectroscopy. The modified siloxane materials were employed in a variety of sensing schemes. Volatile organic compounds were detected using methyl, phenyl, and naphthyl-functionalized materials on a Fabry-Perot interferometer and a refractometer. The Fabry-Perot interferometer was found to detect the analytes upon siloxane extraction by deformation of the Bragg reflectors. The refractometer was used to determine that naphthyl-functionalized siloxanes had elevated refractive indices, rendering these materials more sensitive to some analytes. Antibody-modified siloxanes were used to detect biological analytes through a solid phase microextraction-mediated enzyme linked immunosorbent assay (SPME ELISA). The SPME ELISA was found to have higher analyte sensitivity compared to a conventional ELISA system. The detection scheme was used to detect Escherichia coli at 8500 CFU/mL. These results demonstrate the variety of methods that can be used to modify siloxanes and the wide range of applications of modified siloxanes has been demonstrated through chemical and biological sensing schemes.

Conhecimentos sobre a RNCCI: um estudo exploratório sobre a perceção dos alunos do curso de enfermagem

A Rede Nacional de Cuidados Continuados (RNCCI) foi criada em 2006 pelo decreto-lei nº 101/2006, no âmbito do Ministério da Saúde e da Segurança Social. A RNCCI tem como missão prestar os cuidados adequados, de saúde e apoio social, a todas as pessoas que, independentemente da idade, se encontrem em situação de dependência, e articula-se com os serviços de saúde e sociais já existentes. Para cumprir a sua missão, a RNCCI, necessita de uma equipa multidisciplinar, na qual integram vários profissionais, tais como: médicos, enfermeiros, assistentes sociais, psicólogos, entre muitos outros, de entre estes os enfermeiros são os profissionais que maior percentagem detêm na constituição da mesma. Daí que seja pertinente a realização de estudos de investigação, com enfermeiros e estudantes de enfermagem, nesta nova valência de cuidados. O presente estudo incide sobre os conhecimentos dos estudantes de enfermagem sobre a RNCCI, que frequentam o terceiro e quarto ano na Escola Superior de Saúde do Instituto Politécnico de Bragança. Sendo a questão de investigação deste estudo: “Quais os conhecimentos dos alunos de enfermagem do terceiro e quarto ano da licenciatura em enfermagem sobre a RNCCI?”. Foi realizado um estudo de natureza quantitativa, descritivo, correlacional, num plano transversal. Optou-se por um processo de amostragem não probabilística de conveniência, que refletisse a distribuição da população por ano de escolaridade. Assim, considerou-se uma amostra de 120 alunos (75 % da população), selecionados acidentalmente, visando a disponibilidade, rapidez e o menor custo na recolha de dados. Concluiu-se que os alunos de enfermagem de uma forma geral apresentam conhecimentos sobre a RNCCI. Destacando-se uma percentagem de 90% de respostas corretas referentes sobre a RNCCI. No entanto 75% dos alunos responderam erradamente às afirmações relacionados com o processo de referenciação e tipologia das respostas da RNCCI. Comparando estes resultados com estudos realizados com enfermeiros que exercem funções na RNCCI, verifica-se que os alunos não apresentam conhecimentos suficientes para desencadear funções ou processos relacionados com a RNCCI, apesar de terem conhecimentos gerais da mesma, pois apresentam consideráveis falhas desde logo no processo de referenciação, assim como profissionais que já trabalham na área. Tais factos constatados salientam a importância de formação teórica e/ou prática, no plano curricular da licenciatura de enfermagem, preparando os futuros enfermeiros para exercerem as suas funções na RNCCI, e não só. Pois os enfermeiros que trabalham nos cuidados de saúde primários e secundários, também eles necessitam de ter conhecimentos sobre a RNCCI, verificando-se muito frequentemente é durante o internamento que se inicia o processo de referenciação. Sugerindo que o conhecimento dos alunos sobre a RNCCI, são adquiridos na sua maioria durante a realização do ensino clínico, onde acompanham este tipo de atividades. Embora a formação base da licenciatura, permita uma vasta aquisição de competências teórico-práticas, e a integração de formação sobre a RNCCI, seja considerada pelos alunos de enfermagem, como importante ou muito importante, a mesma pode considerar-se atualmente praticamente inexistente.

Sistema de gestão de energia e ativação de uma espoleta eletrónica

Os incêndios florestais constituem uma realidade que pode ser minimizada com o auxílio Forças Armadas, através de homens e de meios. O Projeto FIREND®, no qual este trabalho está inserido, tem como objetivo projetar uma munição que ao libertar uma substância química sobre o fogo, o impeça de se expandir e se possível, o extinga. O projétil tem 155mm de calibre e o seu compartimento de carga terá cerca de 7,5

Adherence to a Bronchiolitis Clinical Pathway is Associated with Decreased Length of Stay and Costs

Thesis (Master's)--University of Washington, 2016-06

Virtual reality exposure therapy: 150-degree screen to desktop PC

Virtual reality exposure therapy (VRET) developed using immersive or semi-immersive virtual environments present a usability problem for practitioners. To meet practitioner requirements for lower cost and portability VRET programs must often be ported onto desktop environments such as the personal computer (PC). However, success of VRET has been shown to be linked to presence, and the environment's ability to evoke the same reactions and emotions as a real experience. It is generally accepted that high-end virtual environments ( VEs) are more immersive than desktop PCs, but level of immersion does not always predict level of presence. This paper reports on the impact on presence of porting a therapeutic VR application for Schizophrenia from the initial research environment of a semi-immersive curved screen to PC. Presence in these two environments is measured both introspectively and across a number of causal factors thought to underlie the experience of presence. Results show that the VR exposure program successfully made users feel they were present in both platforms. While the desktop PC achieved higher scores on presence across causal factors participants reported they felt more present in the curved screen environment. While comparison of the two groups was statistically significant for the PQ but not for the IPQ, subjective reports of experiences in the environments should be considered in future research as the success of VRET relies heavily on the emotional response of patients to the therapeutic program.