Performance evaluation of low environmental impact asphalt concretes using the mechanistic empirical design method based on laboratory fatigue and permanent deformation models

The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.

Le reologia dei leganti bituminosi stradali: studio delle proprietà meccaniche a seguito di processi di “aging” in laboratorio

Lo studio effettuato pone le sue basi sulla ricerca di materiali stradali che combinino ad elevati standard prestazionali, la riduzione dell’impatto ambientale in fase realizzativa e manutentiva. In particolare il seguente lavoro si occupa dello studio di 7 leganti modificati con polimeri ed additivati con cere. I primi infatti conferiscono alla miscela maggiore elastoplasticità, incrementandone la durabilità e la resistenza a fatica. Nei secondi la presenza del materiale paraffinico contribuisce a ridurre la viscosità del bitume, consentendo un notevole abbassamento della temperatura di produzione e stesa della miscela. Numerosi studi hanno dimostrato che le caratteristiche meccaniche della pavimentazione sono fortemente influenzate dal grado di ossidazione delle componenti organiche del bitume, ovvero dal fenomeno dell’invecchiamento o aging. Pertanto allo studio reologico del bitume, si sono affiancate prove di simulazione dell’ invecchiamento nel breve e lungo termine. In fase di ricerca sperimentale si sono analizzati i leganti modificati ed additivati secondo la teoria della viscoelasticità, simulando le reali condizioni di carico ed invecchiamento alle quali il bitume è sottoposto. Tutte le prove di caratterizzazione reologica avanzata sono state effettuate mediante l’utilizzo del DSR (Dynamic Shear Rheometer - UNI EN 14770 ) in varie configurazioni di prova e l’invecchiamento a breve termine è stato simulato mediante RTFOT (Rolling thin film oven test -UNI EN 12607-1). Si è proposto inoltre una nuova procedura di aging invecchiando il bitume alla temperatura di Twork, ovvero a quel valore della temperatura tale per cui, in fase di messa in opera, si avrà una distribuzione molecolare omogenea del modificante all’interno del bitume.

Analisi delle preferenze per le diverse categorie di pomodoro trasformato nel food service

Il pomodoro è una delle colture principali del panorama agro-alimentare italiano e rappresenta un ingrediente base della tradizione culinaria nazionale. Il pomodoro lavorato dall’industria conserviera può essere trasformato in diverse tipologie merceologiche, che si differenziano in base alla tecniche di lavorazione impiegate ed alle caratteristiche del prodotto finito. la percentuale di spesa totale destinata all’acquisto di cibo fuori casa è in aumento a livello globale e l’interesse dell’industria alimentare nei confronti di questo canale di vendita è quindi crescente. Mentre sono numerose le indagine in letteratura che studiano i processi di acquisto dei consumatori finali, non ci sono evidenze di studi simili condotti sugli operatori del Food Service. Obiettivo principale della ricerca è quello di valutare le preferenze dei responsabili acquisti del settore Food Service per diverse tipologie di pomodoro trasformato, in relazione ad una gamma di attributi rilevanti del prodotto e di caratteristiche del cliente. La raccolta dei dati è avvenuta attraverso un esperimento di scelta ipotetico realizzato in Italia e alcuni mercati esteri. Dai risultati ottenuti dall’indagine emerge che i Pelati sono la categoria di pomodoro trasformato preferita dai responsabili degli acquisti del settore Food Service intervistati, con il 35% delle preferenze dichiarate nell'insieme dei contesti di scelta proposti, seguita dalla Polpa (25%), dalla Passata (20%) e dal Concentrato (15%). Dai risultati ottenuti dalla stima del modello econometrico Logit a parametri randomizzati è emerso che alcuni attributi qualitativi di fiducia (credence), spesso impiegati nelle strategie di differenziazione e posizionamento da parte dell’industria alimentare nel mercato Retail, possono rivestire un ruolo importante anche nell’influenzare le preferenze degli operatori del Food Service. Questo potrebbe quindi essere un interessante filone di ricerca da sviluppare nel futuro, possibilmente con l'impiego congiunto di metodologie di analisi basate su esperimenti di scelta ipotetici e non ipotetici.

Fast and accurate numerical solutions in some problems of particle and radiation transport: synthetic acceleration for the method of short characteristics, Doppler-broadened scattering kernel, remote sensing of the cryosphere

The aim of this work is to present various aspects of numerical simulation of particle and radiation transport for industrial and environmental protection applications, to enable the analysis of complex physical processes in a fast, reliable, and efficient way. In the first part we deal with speed-up of numerical simulation of neutron transport for nuclear reactor core analysis. The convergence properties of the source iteration scheme of the Method of Characteristics applied to be heterogeneous structured geometries has been enhanced by means of Boundary Projection Acceleration, enabling the study of 2D and 3D geometries with transport theory without spatial homogenization. The computational performances have been verified with the C5G7 2D and 3D benchmarks, showing a sensible reduction of iterations and CPU time. The second part is devoted to the study of temperature-dependent elastic scattering of neutrons for heavy isotopes near to the thermal zone. A numerical computation of the Doppler convolution of the elastic scattering kernel based on the gas model is presented, for a general energy dependent cross section and scattering law in the center of mass system. The range of integration has been optimized employing a numerical cutoff, allowing a faster numerical evaluation of the convolution integral. Legendre moments of the transfer kernel are subsequently obtained by direct quadrature and a numerical analysis of the convergence is presented. In the third part we focus our attention to remote sensing applications of radiative transfer employed to investigate the Earth's cryosphere. The photon transport equation is applied to simulate reflectivity of glaciers varying the age of the layer of snow or ice, its thickness, the presence or not other underlying layers, the degree of dust included in the snow, creating a framework able to decipher spectral signals collected by orbiting detectors.

Evaluation of slope stability under water and seismic load through the Minimum Lithostatic Deviation method

The main objective of this thesis is to obtain a better understanding of the methods to assess the stability of a slope. We have illustrated the principal variants of the Limit Equilibrium (LE) method found in literature, focalizing our attention on the Minimum Lithostatic Deviation (MLD) method, developed by Prof. Tinti and his collaborators (e.g. Tinti and Manucci, 2006, 2008). We had two main goals: the first was to test the MLD method on some real cases. We have selected the case of the Vajont landslide with the objective to reconstruct the conditions that caused the destabilization of Mount Toc, and two sites in the Norwegian margin, where failures has not occurred recently, with the aim to evaluate the present stability state and to assess under which conditions they might be mobilized. The second goal was to study the stability charts by Taylor and by Michalowski, and to use the MLD method to investigate the correctness and adequacy of this engineering tool.

Il diritto alla detrazione e le frodi Iva

Il presente lavoro parte dalla constatazione che l’Imposta sul valore aggiunto è stata introdotta con lo scopo specifico di tassare il consumo in modo uniforme a livello europeo. La globalizzazione dell’economia con l’abolizione delle frontiere ha tuttavia favorito la nascita non solo di un mercato unico europeo, ma anche di “un mercato unico delle frodi”. L’esistenza di abusi e frodi in ambito Iva risulta doppiamente dannosa per l’Unione europea: tali condotte incidono quantitativamente sull'ammontare delle risorse proprie dell’Unione e sulle entrate fiscali dei singoli Stati membri nonché violano il principio di concorrenza e producono distorsioni nel mercato unico. È in questo contesto che intervengono i giudici nazionali e la Corte di Giustizia, al fine di porre un freno a tali fenomeni patologici. Quest’ultima, chiamata a far rispettare il diritto comunitario, ha sviluppato una misura antifrode e antiabuso consistente nel diniego del diritto alla detrazione qualora lo stesso venga invocato dal soggetto passivo abusivamente o fraudolentemente. Vedremo però che il problema non può essere facilmente ridotto a formule operative: al di là dello schema, fin troppo scontato, dell’operatore apertamente disonesto e degli operatori con esso dichiaratamente correi, rimane il territorio grigio dei soggetti coinvolti, qualche volta inconsapevolmente qualche volta consapevolmente, ma senza concreta partecipazione nella frode da altri orchestrata. Permane a questo punto la domanda se sia coerente - in un sistema impositivo che privilegia i profili oggettivi, prescindendo, salvo gli aspetti sanzionatori, da quelli soggettivi- negare il diritto alla detrazione Iva per asserita consapevolezza di comportamenti fraudolenti altrui o se non vi siano regole più adatte al fine di porre un freno alle frodi e dunque più conformi al principio di proporzionalità.

Le cure oncologiche e la prospettiva del paziente. Revisione di letteratura e un caso di studio

Numerose ricerche indicano i modelli di cure integrate come la migliore soluzione per costruire un sistema più efficace ed efficiente nella risposta ai bisogni del paziente con tumore, spesso, però, l’integrazione è considerata da una prospettiva principalmente clinica, come l’adozione di linee guida nei percorsi della diagnosi e del trattamento assistenziale o la promozione di gruppi di lavoro per specifiche patologie, trascurando la prospettiva del paziente e la valutazione della sua esperienza nei servizi. Il presente lavoro si propone di esaminare la relazione tra l’integrazione delle cure oncologiche e l’esperienza del paziente; com'è rappresentato il suo coinvolgimento e quali siano i campi di partecipazione nel percorso oncologico, infine se sia possibile misurare l’esperienza vissuta. L’indagine è stata svolta sia attraverso la revisione e l’analisi della letteratura sia attraverso un caso di studio, condotto all'interno della Rete Oncologica di Area Vasta Romagna, tramite la somministrazione di un questionario a 310 pazienti con neoplasia al colon retto o alla mammella. Dai risultati, emerge un quadro generale positivo della relazione tra l’organizzazione a rete dei servizi oncologici e l’esperienza del paziente. In particolare, è stato possibile evidenziare quattro principali nodi organizzativi che introducono la prospettiva del paziente: “individual care provider”,“team care provider”,“mixed approach”,“continuity and quality of care”. Inoltre, è stato possibile delineare un campo semantico coerente del concetto di coinvolgimento del paziente in oncologia e individuare quattro campi di applicazione, lungo tutte le fasi del percorso: “prevenzione”, “trattamento”,“cura”,“ricerca”. Infine, è stato possibile identificare nel concetto di continuità di cura il modo in cui i singoli pazienti sperimentano l’integrazione o il coordinamento delle cure e analizzare differenti aspetti del vissuto della persona e dell’organizzazione.

L'internazionalizzazione e le specializzazioni commerciali delle regioni italiane nel settore agroalimentare

Il presente lavoro si compone di tre capitoli, tra loro autonomi e allo stesso tempo intrinsecamente collegati. Nel primo capitolo si è voluto offrire una panoramica dello scenario agroalimentare italiano e della sua rilevanza nel sistema economico nazionale. Per fare ciò si è partiti da una disamina del contesto economico mondiale per poi centrare il discorso sull’andamento congiunturale dell’agroalimentare nazionale, analizzato secondo i principali indicatori macroeconomici. Successivamente vengono presentati gli attori del sistema agroalimentare, rilevando per ciascuno di essi le proprie specificità e tendenze. L’ultima parte del primo capitolo è un focus specifico sul ruolo giocato dall’agroalimentare italiano nel commercio e nei mercati internazionali. Nel secondo capitolo si è approntata una mappatura territoriale e per comparti delle principali specializzazioni commerciali del settore agroalimentare delle regioni italiane. Tramite l'utilizzo di appositi indici di specializzazione si è analizzata la realtà agroalimentare delle regioni italiane, mettendone in evidenza la struttura competitiva e approssimandola tramite l’analisi dei vantaggi comparati di cui gode. Infine, nel terzo capitolo, si è ampliato il campo d'analisi tentando di misurare il livello di internazionalizzazione delle regioni italiane, non solo in ambito agroalimentare, ma considerando l'intero sistema territoriale regionale. Si è tentato di fare ciò tramite tre strumenti: l’analisi delle componenti principali (PCA o ACP), il Mazziotta-Pareto Index e il Wroclaw taxonomic method. I risultati ottenuti tramite le tre modalità di elaborazione hanno permesso di approfondire la conoscenza del livello di internazionalizzazione registrato dalle regioni italiane, mettendo in luce ulteriori filoni di ricerca della tematica osservata.

Portare la tecnologia in cabina: le nuove tecnologie a servizio dell'interprete e il caso della simultanea con testo

The digital revolution has affected all aspects of human life, and interpreting is no exception. This study will provide an overview of the technology tools available to the interpreter, but it will focus more on simultaneous interpretation, particularly on the “simultaneous interpretation with text” method. The decision to analyse this particular method arose after a two-day experience at the Court of Justice of the European Union (CJEU), during research for my previous Master’s dissertation. During those days, I noticed that interpreters were using "simultaneous interpretation with text" on a daily basis. Owing to the efforts and processes this method entails, this dissertation will aim at discovering whether technology can help interpreters, and if so, how. The first part of the study will describe the “simultaneous with text” approach, and how it is used at the CJEU; the data provided by a survey for professional interpreters will describe its use in other interpreting situations. The study will then describe Computer-Assisted Language Learning technologies (CALL) and technologies for interpreters. The second part of the study will focus on the interpreting booth, which represents the first application of the technology in the interpreting field, as well as on the technologies that can be used inside the booth: programs, tablets and apps. The dissertation will then analyse the programs which might best help the interpreter in "simultaneous with text" mode, before providing some proposals for further software upgrades. In order to give a practical description of the possible upgrades, the domain of “judicial cooperation in criminal matters” will be taken as an example. Finally, after a brief overview of other applications of technology in the interpreting field (i.e. videoconferencing, remote interpreting), the conclusions will summarize the results provided by the study and offer some final reflections on the teaching of interpreting.

Muffler characterization with implementation of the finite element method and experimental techniques

Determining how an exhaust system will perform acoustically before a prototype muffler is built can save the designer both a substantial amount of time and resources. In order to effectively use the simulation tools available it is important to understand what is the most effective tool for the intended purpose of analysis as well as how typical elements in an exhaust system affect muffler performance. An in-depth look at the available tools and their most beneficial uses are presented in this thesis. A full parametric study was conducted using the FEM method for typical muffler elements which was also correlated to experimental results. This thesis lays out the overall ground work on how to accurately predict sound pressure levels in the free field for an exhaust system with the engine properties included. The accuracy of the model is heavily dependent on the correct temperature profile of the model in addition to the accuracy of the source properties. These factors will be discussed in detail and methods for determining them will be presented. The secondary effects of mean flow, which affects both the acoustical wave propagation and the flow noise generation, will be discussed. Effective ways for predicting these secondary effects will be described. Experimental models will be tested on a flow rig that showcases these phenomena.

État des Juifs en France, en Espagne et en Italie, depuis le commencement du cinquième siècle de lère vulgaire jusqu'a la fin du seizième, sous les divers rapports du droit civil, du commerce et de la littérature ...

par [Charles Joseph] Bail

A.T.I. Method: apprenticeship, test, instruction

The A.T.I, method is based on the control theory and is the result of the author's personal experiences and observations. The academic year 1971-72 has so far shown that the practical results that may be expected from it can not as yet be evaluated ; all we can do for the present is to look at how it is being applied. However, as the reader will later perceive, most of our arguments are based on general theories,as it is felt that those which relate to the system are not as important as those which refer to the means, since it is the latter which later condition the application of the method to other systems.

La representación de la arquitectura moderna : la villa Stein-de Monzie en "L'Oeuvre Complète" de Le Corbusier y Pierre Jeanneret : influencia de la visión cinematográfica

Esta tesis doctoral trata de investigar cuánto hubo de presencia del cine en el pensamiento de Le Corbusier y Pierre Jeanneret, a la hora de acometer la publicación y maquetación de las páginas dedicadas a la Villa Stein-de Monzie en Garches, en “Le Corbusier et Pierre Jeanneret. Oeuvre Complète 1910-1929”. Qué mecanismos cinematográficos pusieron en juego, cuando montaban las páginas de L´Oeuvre Complète. Más que encontrar elementos cinematográficos utilizados de manera directa; el objetivo de esta tesis es profundizar en los mecanismos, procedimientos, sistemas de generación de ideas a lo largo del proceso de proyecto; en las maneras de percibir y experimentar los espacios, o de observar las formas. El armazón lo compone por lo tanto el análisis del modo en que Le Corbusier representa la villa en L´Oeuvre Complète, sus intenciones y la función pedagógica de este modo de representar; así como sus diferencias con respecto a lo realmente construido. Una realidad elaborada sobre un tablero; maquetando su representación, eligiendo los fragmentos, y componiendo las láminas (cercana a la de un director de cine). La justificación del objeto a estudiar se plantea en el primer capítulo: L´Oeuvre Complète (1937), la reedición en francés, alemán e inglés de la primera edición en alemán, Ihr Gesamtes Werk (1929).Se establecen las intenciones de Le Corbusier de que se convierta en un modelo de Tratado de Arquitectura Moderna, eminentemente visual. Se estudian los mecanismos formales y geométricos de composición del libro, y el modo en el que L´Oeuvre Complète debe ser leída. El desarrollo de los siguientes capítulos (del 2 al 9) recoge el método principal de investigación de esta tesis, basado en una lectura longitudinal, crítica y sistemática, a partir de la observación atenta de la representación de la villa Stein-de Monzie en Garches, en las páginas nº 140 a 149 de L´Oeuvre Complète. Se efectúa mediante un desarrollo lineal y secuenciado, como si de un guión cinematográfico se tratara. Cada capítulo describe y analiza cada uno de los diferentes fragmentos, permitiendo al mismo tiempo enlazar temas de interés que ayudan a comprender aspectos de la villa de Garches, de su concepción en la intensa labor de proyecto (con numerosas variantes y propuestas), e incluso de su aparición en el cine. Además, la tesis arroja luz sobre unos documentos bastante desconocidos: las láminas de la colección del Museo Cooper-Hewitt de nueva York, para la villa de Garches. El análisis de la presentación de la villa de Garches en L´Oeuvre Complète, constata que para Le Corbusier, el fragmento, per se, ha de ser perfecto, produciendo la máxima emoción. Como un prestidigitador, Le Corbusier los manipula, o le niega información al espectador mediante el uso de la elipsis en el relato. Los textos concatenan las imágenes, soportan el hilo de la narración. Los bocetos quieren siempre seducir al espectador: son dibujos que rezuman vitalidad, con una técnica muy cercana a la ligne claire del cómic. Las plantas son un laboratorio para demostrar su jerarquía y su libertad de composición; eliminando elementos, distorsionando la valoración de líneas y apareciendo algún elemento no ejecutado. Los alzados, esquemáticos y abstractos, demuestran el control de la geometría para garantizar la emoción. Las fotografías son controladas en su fase de captura (elección del punto de vista, cuidada puesta en escena de los objetos, composición con la luz, uso de las sombras para la aparición del fuera de campo); pero también en la fase de postproducción y edición, donde son cortadas, alisadas superficies, borrando o dibujando elementos sobre ellas. El montaje compone asimismo una representación dinámica, fragmentada y múltiple de la villa. Como sucede en el cine, los fragmentos sólo encuentran su razón de ser una vez son re-creados y montados en la cabeza del espectador. La falta de raccord es un mecanismo buscado por Le Corbusier, trasladando a la representación una de las primordiales características de la villa de Garches: su permanente dualidad simultánea. Todos estos mecanismos son desplegados por Le Corbusier, para ofrecer una versión idealizada de la villa, que recoja todas las virtudes de los distintos proyectos e incorpore el factor tiempo. ABSTRACT This doctoral thesis tries to investigate how much the cinema affected Le Corbusier and Pierre Jeanneret´s thoughts, at the moment of undertaking the publication and layout of the pages dedicated to the villa Stein-de Monzie in Garches, in the book “Le Corbusier et Pierre Jeanneret. Oeuvre Complète 1910-1929”. Which cinematographic mechanisms they brought into play, when they were mounting those pages. Instead of finding cinematographic elements, used directly; the aim of this thesis is to go deeply into the mechanisms, methods, systems of generation of ideas along the project process; into the ways of seeing and feeling the spaces, or of watching the forms. The body is composed therefore by the analysis of the way in which Le Corbusier represents the villa in L'Oeuvre Complète, his intentions and the pedagogic function of that way of representation; as well as its differences with the real built villa. One reality elaborated on a board; laying out its representation, choosing the fragments, and composing the sheets (near to the work of a director of cinema). The justification of the object to studying appears in the first chapter: L'Oeuvre Complète (1937), the reissue in French, German and English of the first edition in German, Ihr Gesamtes Werk (1929). This chapter shows the intentions of Le Corbusier of turning the book into a model of modern architecture, highly visual. The formal and geometric mechanisms of composition of the book are studied, and the way in which L'Oeuvre Complète must be read. The development of the following chapters (from 2 to 9) gathers the principal method of investigation of this thesis, based on a longitudinal, critical and systematic reading; from the watching of the representation of the villa Stein-de Monzie in Garches, in the pages nr. 140 to 149 of L'Oeuvre Complète. It is carried out by a linear and sequenced development, as a cinematographic script. Every chapter describes and analyzes each of the different fragments, allowing at the same time to connect interesting issues that help to understand aspects of the villa in Garches, of its conception in the intense project process (with numerous variants and designs), and even of its appearance in films. Also, the thesis throws light on some unknown documents: the sheets of the collection of the Museum Cooper-Hewitt in New York, for the villa in Garches. The analysis of the presentation of the villa in Garches in L'Oeuvre Complète, proves that for Le Corbusier, the fragment, itself, has to be perfect, getting the maximum emotion. As a prestidigitator, Le Corbusier manipulates them, or denies information to the spectator by means of the use of the ellipsis in the story. The texts concatenate the images, support the thread of the story. The sketches always attempt to seduce the spectator: they are drawings that leak vitality, with lines very near to the ligne claire of the cómic. The plans are a laboratory to demonstrate their hierarchy and their freedom of composition; deleting elements, distorting the thickness of lines and showing some not executed elements. The elevations, schematic and abstract, shows the control of the geometry to guarantee the emotion in architecture. The pictures are controlled in their instant of capture (choice of the point of view, elegant mise-en-scène of the objects, composition with light, use of the shadows for the appearance of out of vision); but also in the postproduction and edition time, when surfaces are cut, smoothing, erasing or drawing elements in them. The montage composes in the same way a dynamic, fragmented and multiple representation of the villa. As in the films, the fragments only find their raison d'être once they have been re-created and mounted into the mind of the viewer. The continuity error is a mechanism allowed by Le Corbusier, transfering to the representation in the book one of the basic characteristics of the villa in Garches: its constant simultaneous duality. All these methods are displayed by Le Corbusier, to offer an idealized version of the villa, which gathers all the virtues of the different projects, and incorporates the time factor.

Réadaptation et performance visuelle chez la personne hémianopsique : une étude de cas portant sur les saccades oculaires et le blindsight

But: La perte unilatérale du cortex visuel postérieur engendre une cécité corticale controlatérale à la lésion, qu’on appelle hémianopsie homonyme (HH). Celle-ci est notamment accompagnée de problèmes d’exploration visuelle dans l’hémichamp aveugle dus à des stratégies oculaires déficitaires, qui ont été la cible des thérapies de compensation. Or, cette perte de vision peut s’accompagner d’une perception visuelle inconsciente, appelée blindsight. Notre hypothèse propose que le blindsight soit médié par la voie rétino-colliculaire extrastriée, recrutant le colliculus supérieur (CS), une structure multisensorielle. Notre programme a pour objectif d’évaluer l’impact d’un entraînement multisensoriel (audiovisuel) sur la performance visuelle inconsciente des personnes hémianopsiques et les stratégies oculaires. Nous essayons, ainsi, de démontrer l’implication du CS dans le phénomène de blindsight et la pertinence de la technique de compensation multisensorielle comme thérapie de réadaptation. Méthode: Notre participante, ML, atteinte d’une HH droite a effectué un entraînement d’intégration audiovisuel pour une période de 10 jours. Nous avons évalué la performance visuelle en localisation et en détection ainsi que les stratégies oculaires selon trois comparaisons principales : (1) entre l’hémichamp normal et l’hémichamp aveugle; (2) entre la condition visuelle et les conditions audiovisuelles; (3) entre les sessions de pré-entraînement, post-entraînement et 3 mois post-entraînement. Résultats: Nous avons démontré que (1) les caractéristiques des saccades et des fixations sont déficitaires dans l’hémichamp aveugle; (2) les stratégies saccadiques diffèrent selon les excentricités et les conditions de stimulations; (3) une adaptation saccadique à long terme est possible dans l’hémichamp aveugle si l’on considère le bon cadre de référence; (4) l’amélioration des mouvements oculaires est liée au blindsight. Conclusion(s): L’entraînement multisensoriel conduit à une amélioration de la performance visuelle pour des cibles non perçues, tant en localisation qu’en détection, ce qui est possiblement induit par le développement de la performance oculomotrice.