888 resultados para Giles, Buck
Resumo:
Productivity decline in sown grass pastures is widespread in northern Australia and reduces production by approximately 50%, a farm gate cost to industry of > $17B over the next 30 years. Buffel grass is the most widely established sown species (>75% of plantings) and has been estimated to be “dominant” on 5.8 M hectares and “common” on a further 25.9 M hectares of Queensland. Legumes are the most cost effective mitigation option and can reclaim 30-50% of lost production. Commercial use of legumes has achieved mixed results with notable successes but many failures. There is significant opportunity to improve commercial results from legumes using existing technologies, however there is a need for targeted research to improve the reliability of establishment and productivity of legumes. This review recommends the grazing industry invest in targeted R,D&E to assist industry in improving production and sustainability of rundown pastures.
Resumo:
Sown pasture rundown and declining soil fertility for forage crops are too serious to ignore with losses in beef production of up to 50% across Queensland. The feasibility of using strategic applications of nitrogen (N) fertiliser to address these losses was assessed by analysing a series of scenarios using data drawn from published studies, local fertiliser trials and expert opinion. While N fertilser can dramatically increase productivity (growth, feed quality and beef production gains of over 200% in some scenarios), the estimated economic benefits, derived from paddock level enterprise budgets for a fattening operation, were much more modest. In the best-performing sown grass scenarios, average gross margins were doubled or tripled at the assumed fertiliser response rates, and internal rates of return of up to 11% were achieved. Using fertiliser on forage sorghum or oats was a much less attractive option and, under the paddock level analysis and assumptions used, forages struggled to be profitable even on fertile sites with no fertiliser input. The economics of nitrogen fertilising on grass pasture were sensitive to the assumed response rates in both pasture growth and liveweight gain. Consequently, targeted research is proposed to re-assess the responses used in this analysis, which are largely based on research 25-40 years ago when soils were generally more fertile and pastures less rundown.
Resumo:
This dissertation examines the concept of beatific enjoyment (fruitio beatifica) in scholastic theology and philosophy in the thirteenth and early fourteenth century. The aim of the study is to explain what is enjoyment and to show why scholastic thinkers were interested in discussing it. The dissertation consists of five chapters. The first chapter deals with Aurelius Augustine's distinction between enjoyment and use and the place of enjoyment in the framework of Augustine's view of the passions and the human will. The first chapter also focuses upon the importance of Peter Lombard's Sentences for the transmission of Augustine's treatment of enjoyment in scholastic thought as well as upon Lombard's understanding of enjoyment. The second chapter treats thirteenth-century conceptions of the object and psychology of enjoyment. Material for this chapter is provided by the writings - mostly Sentences commentaries - of Alexander of Hales, Albert the Great, Bonaventure, Thomas Aquinas, Peter of Tarentaise, Robert Kilwardby, William de la Mare, Giles of Rome, and Richard of Middleton. The third chapter inspects early fourteenth-century views of the object and psychology of enjoyment. The fourth chapter focuses upon discussions of the enjoyment of the Holy Trinity. The fifth chapter discusses the contingency of beatific enjoyment. The main writers studied in the third, fourth and fifth chapters are John Duns Scotus, Peter Aureoli, Durandus of Saint Pourçain, William of Ockham, Walter Chatton, Robert Holcot, and Adam Wodeham. Historians of medieval intellectual history have emphasized the significance of the concept of beatific enjoyment for understanding the character and aims of scholastic theology and philosophy. The concept of beatific enjoyment was developed by Augustine on the basis of the insight that only God can satisfy our heart's desire. The possibility of satisfying this desire requires a right ordering of the human mind and a detachment of the will from the relative goals of earthly existence. Augustine placed this insight at the very foundation of the notion of Christian learning and education in his treatise On Christian Doctrine. Following Augustine, the twelfth-century scholastic theologian Peter Lombard made the concept of enjoyment the first topic in his plan of systematic theology. The official inclusion of Lombard's Sentences in the curriculum of theological studies in the early universities stimulated vigorous discussions of enjoyment. Enjoyment was understood as a volition and was analyzed in relation to cognition and other psychic features such as rest and pleasure. This study shows that early fourteenth-century authors deepened the analysis of enjoyment by concentrating upon the relationship between enjoyment and mental pleasure, the relationship between cognition and volition, and the relationship between the will and the beatific object (i.e., the Holy Trinity). The study also demonstrates the way in which the idea of enjoyment was affected by changes in the method of theological analysis - the application of Aristotelian logic in a Trinitarian context and the shift from virtue ethics to normative ethics.
Resumo:
Efficient and effective growth factor (GF) delivery is an ongoing challenge for tissue regeneration therapies. The accurate quantification of complex molecules such as GFs, encapsulated in polymeric delivery devices, is equally critical and just as complex as achieving efficient delivery of active GFs. In this study, GFs relevant to bone tissue formation, vascular endothelial growth factor (VEGF) and bone morphogenetic protein 7 (BMP-7), were encapsulated, using the technique of electrospraying, into poly(lactic-co-glycolic acid) microparticles that contained poly(ethylene glycol) and trehalose to assist GF bioactivity. Typical quantification procedures, such as extraction and release assays using saline buffer, generated a significant degree of GF interactions, which impaired accurate assessment by enzyme-linked immunosorbent assay (ELISA). When both dry BMP-7 and VEGF were processed with chloroform, as is the case during the electrospraying process, reduced concentrations of the GFs were detected by ELISA; however, the biological effect on myoblast cells (C2C12) or endothelial cells (HUVECs) was unaffected. When electrosprayed particles containing BMP-7 were cultured with preosteoblasts (MC3T3-E1), significant cell differentiation into osteoblasts was observed up to 3 weeks in culture, as assessed by measuring alkaline phosphatase. In conclusion, this study showed how electrosprayed microparticles ensured efficient delivery of fully active GFs relevant to bone tissue engineering. Critically, it also highlights major discrepancies in quantifying GFs in polymeric microparticle systems when comparing ELISA with cell-based assays.
Resumo:
BACKGROUND: Unnecessary intervention and overtreatment of indolent disease are common challenges in clinical management of prostate cancer. Improved tools to distinguish lethal from indolent disease are critical. METHODS: We performed a genome-wide survival analysis of cause-specific death in 24,023 prostate cancer patients (3,513 disease-specific deaths) from the PRACTICAL and BPC3 consortia. Top findings were assessed for replication in a Norwegian cohort (CONOR). RESULTS: We observed no significant association between genetic variants and prostate cancer survival. CONCLUSIONS: Common genetic variants with large impact on prostate cancer survival were not observed in this study. IMPACT: Future studies should be designed for identification of rare variants with large effect sizes or common variants with small effect sizes.
Resumo:
BACKGROUND Polygenic risk scores comprising established susceptibility variants have shown to be informative classifiers for several complex diseases including prostate cancer. For prostate cancer it is unknown if inclusion of genetic markers that have so far not been associated with prostate cancer risk at a genome-wide significant level will improve disease prediction. METHODS We built polygenic risk scores in a large training set comprising over 25,000 individuals. Initially 65 established prostate cancer susceptibility variants were selected. After LD pruning additional variants were prioritized based on their association with prostate cancer. Six-fold cross validation was performed to assess genetic risk scores and optimize the number of additional variants to be included. The final model was evaluated in an independent study population including 1,370 cases and 1,239 controls. RESULTS The polygenic risk score with 65 established susceptibility variants provided an area under the curve (AUC) of 0.67. Adding an additional 68 novel variants significantly increased the AUC to 0.68 (P = 0.0012) and the net reclassification index with 0.21 (P = 8.5E-08). All novel variants were located in genomic regions established as associated with prostate cancer risk. CONCLUSIONS Inclusion of additional genetic variants from established prostate cancer susceptibility regions improves disease prediction. Prostate 75:1467–1474, 2015. © 2015 Wiley Periodicals, Inc.
Resumo:
Background Epidemiological studies suggest a potential role for obesity and determinants of adult stature in prostate cancer risk and mortality, but the relationships described in the literature are complex. To address uncertainty over the causal nature of previous observational findings, we investigated associations of height- and adiposity-related genetic variants with prostate cancer risk and mortality. Methods We conducted a case–control study based on 20,848 prostate cancers and 20,214 controls of European ancestry from 22 studies in the PRACTICAL consortium. We constructed genetic risk scores that summed each man’s number of height and BMI increasing alleles across multiple single nucleotide polymorphisms robustly associated with each phenotype from published genome-wide association studies. Results The genetic risk scores explained 6.31 and 1.46 % of the variability in height and BMI, respectively. There was only weak evidence that genetic variants previously associated with increased BMI were associated with a lower prostate cancer risk (odds ratio per standard deviation increase in BMI genetic score 0.98; 95 % CI 0.96, 1.00; p = 0.07). Genetic variants associated with increased height were not associated with prostate cancer incidence (OR 0.99; 95 % CI 0.97, 1.01; p = 0.23), but were associated with an increase (OR 1.13; 95 % CI 1.08, 1.20) in prostate cancer mortality among low-grade disease (p heterogeneity, low vs. high grade <0.001). Genetic variants associated with increased BMI were associated with an increase (OR 1.08; 95 % CI 1.03, 1.14) in all-cause mortality among men with low-grade disease (p heterogeneity = 0.03). Conclusions We found little evidence of a substantial effect of genetically elevated height or BMI on prostate cancer risk, suggesting that previously reported observational associations may reflect common environmental determinants of height or BMI and prostate cancer risk. Genetically elevated height and BMI were associated with increased mortality (prostate cancer-specific and all-cause, respectively) in men with low-grade disease, a potentially informative but novel finding that requires replication.
Resumo:
Introduction: Major Depressive Disorder (MDD) has high prevalence among adolescents and young adults. Evidence of any effective treatments is limited. Exercise as an effective treatment for adults has some support but studies in younger populations are lacking. Therefore the aim of this study was to investigate the feasibility and preliminary efficacy of brief motivational interviewing (MI) plus 12-weeks exercise training as a treatment for MDD in youth...
Tiedostumaton nykytaiteessa : Katse, ääni ja aika vuosituhannen taitteen suomalaisessa nykytaiteessa
Resumo:
Leevi Haapala explores moving image works, sculptures and installations from a psychoanalytic perspective in his study The Unconscious in Contemporary Art. The Gaze, Voice and Time in Finnish Contemporary Art at the Turn of the Millennium . The artists included in the study are Eija-Liisa Ahtila, Hans-Christian Berg, Markus Copper, Liisa Lounila and Salla Tykkä. The theoretical framework includes different psychoanalytic readings of the concepts of the gaze, voice and temporality. The installations are based on spatiality and temporality, and their detailed reading emphasizes the medium-specific features of the works as well as their fragmentary nature, heterogeneity and affectivity. The study is cross-disciplinary in that it connects perspectives from the visual culture, new art history and theory to the interpretation of contemporary art. The most important concepts from psychoanalysis, affect theory and trauma discourse used in the study include affect, object a (objet petit a) as articulated by Jacques Lacan, Sigmund Freud s uncanny (das Unheimliche) and trauma. Das Unheimliche has been translated as uncanny in art history under the influence of Rosalind Krauss. The object of the study, the unconscious in contemporary art, is approached through these concepts. The study focuses on Lacan s additions to the list of partial drives: the gaze and voice as scopic and invocative drives and their interpretations in the studies of the moving image. The texts by the American film theorist and art historian Kaja Silverman are in crucial role. The study locates contemporary art as part of trauma culture, which has a tendency to define individual and historical experiences through trauma. Some of the art works point towards trauma, which may appear as a theoretic or fictitious construction. The study presents a comprehensive collection of different kinds of trauma discourse in the field of art research through the texts of Hal Foster, Cathy Caruth, Ruth Leys and Shoshana Felman. The study connects trauma theory with the theoretical analysis of the interference and discontinuity of the moving image in the readings by Susan Buck-Morss, Mary Ann Doane and Peter Osborn among others. The analysis emphasizes different ways of seeing and multisensoriality in the reception of contemporary art. With their reflections and inverse projections, the surprising mechanisms of Hans-Christian Berg s sculptures are connected with Lacan s views on the early mirroring and imitation attempts of the individual s body image. Salla Tykkä s film trilogy Cave invites one to contemplate the Lacanian theory of the gaze in relation to the experiences of being seen. The three oceanic sculpture installations by Markus Copper are studied through the vocality they create, often through an aggressive way of acting, as well as from the point of view of the functioning of an invocative drive. The study compares the work of fiction and Freud s texts on paranoia and psychosis to Eija-Liisa Ahtila s manuscripts and moving image installations about the same topic. The cinematic time in Liisa Lounila s time-slice video installations is approached through the theoretical study of the unconscious temporal structure. The viewer of the moving image is inside the work in an in-between state: in a space produced by the contents of the work and its technology. The installations of the moving image enable us to inhabit different kinds of virtual bodies or spaces, which do not correspond with our everyday experiences. Nevertheless, the works of art often try to deconstruct the identification to what has been shown on screen. This way, the viewer s attention can be fixed on his own unconscious experiences in parallel with the work s deconstructed nature as representation. The study shows that contemporary art is a central cultural practice, which allows us to discuss the unconscious in a meaningful way. The study suggests that the agency that is discursively diffuse and consists of several different praxes should be called the unconscious. The emergence of the unconscious can happen in two areas: in contemporary art through different senses and discursive elements, and in the study of contemporary art, which, being a linguistic activity is sensitive to the movements of the unconscious. One of the missions of art research is to build different kinds of articulated constructs and to open an interpretative space for the nature of art as an event.
Resumo:
High power converters are used in variable speed induction motor drive applications. Riding through a short term power supply glitch is becoming an important requirement in these power converters. The power converter uses a large number of control circuit boards for its operation. The control power supply need to ensure that any glitch in the grid side does not affect any of these control circuit boards. A power supply failure of these control cards results in shut down of the entire system. The paper discusses the ride through system developed to overcome voltage sags and short duration outages at the power supply terminals of the control cards in these converters. A 240VA non-isolated, bi-directional buck-boost converter has been designed to be used along with a stack of ultracapacitors to achieve the same. A micro-controller based digital control platform made use of to achieve the control objective. The design of the ultracapacitor stack and the bidirectional converter is described the performance of the experimental set-up is evaluated.
Resumo:
This letter proposes a simple tuning algorithm for digital deadbeat control based on error correlation. By injecting a square-wave reference input and calculating the correlation of the control error, a gain correction for deadbeat control is obtained. The proposed solution is simple, it requires a short tuning time, and it is suitable for different DC-DC converter topologies. Simulation and experimental results on synchronous buck converters confirm the properties of the proposed tuning algorithm.
Resumo:
The interaction of guar gum with the hydrophobic solids namely talc, mica and graphite has been investigated through adsorption, electrokinetic and flotation experiments. The adsorption densities of guar gum onto the above hydrophobic minerals show that they are more or less independent of pH. The adsorption isotherms of guar gum onto talc, mica and graphite indicate that the adsorption densities increase with increase in guar gum concentration and all the isotherms follow the as L1 type according to Giles classification. The magnitude of the adsorption density of guar gum onto the above minerals may be arranged in the following sequence: talc > graphite > mica The effect of particle size on the adsorption density of guar gum onto these minerals has indicated that higher adsorption takes place in the coarser size fraction, consequent to an increase in the surface face-to-edge ratio. In the case of the talc and mica samples pretreated with EDTA and the leached graphite sample, a decrease in the adsorption density of guar gum is observed, due to a reduction in the metallic adsorption sites. The adsorption densities of guar gum increase with decrease in sample weight for all the three minerals. Electrokinetic measurements have indicated that the isoelectric points (iep) of these minerals lie between pH 2-3, Addition of guar gum decreases the negative electrophoretic mobility values in proportion to the guar gum concentration without any observable shift in the iep values, resembling the influence of an indifferent electrolyte. The flotation recovery is diminished in the presence of guar gum for all the three minerals, The magnitude of depression follows the same sequence as observed in the adsorption studies. The floatability of EDTA treated talc and mica samples as well as the leached graphite sample is enhanced, complementing the adsorption data, Possible mechanisms of interaction between the hydrophobic minerals and guar gum are discussed.
Resumo:
This paper discusses dynamic modeling of non-isolated DC-DC converters (buck, boost and buck-boost) under continuous and discontinuous modes of operation. Three types of models are presented for each converter, namely, switching model, average model and harmonic model. These models include significant non-idealities of the converters. The switching model gives the instantaneous currents and voltages of the converter. The average model provides the ripple-free currents and voltages, averaged over a switching cycle. The harmonic model gives the peak to peak values of ripple in currents and voltages. The validity of all these models is established by comparing the simulation results with the experimental results from laboratory prototypes, at different steady state and transient conditions. Simulation based on a combination of average and harmonic models is shown to provide all relevant information as obtained from the switching model, while consuming less computation time than the latter.