Efficacy of HUMN criteria for scoring the micronucleus assay in human lymphocytes exposed to a low concentration of p,p'-DDT

The cytokinesis-block micronucleus (CBMN) assay is one of the standard cytogenetic tools employed to assess chromosomal damage subsequent to exposure to genotoxic/cytotoxic agents, and is widely applicable to plant, animal and human cells. In the present study, the CBMN assay was used to assess the baseline damage in binuclear human peripheral blood lymphocytes exposed to 25 µg/L p,p'-DDT for 1, 2, 24, and 48 h by measuring the frequency of micronuclei, nucleoplasmic bridges and nuclear buds. These new scoring criteria facilitated the detection of different types of clastogenic and aneugenic effects induced by this type of pollutant. With these criteria, CBMN can also be used to measure nucleoplasmic bridges which are considered to be consequences of chromosome rearrangements and nuclear buds which are biomarkers of altered gene amplification and gene dosage. The total number of micronuclei observed in binuclear human peripheral blood lymphocytes of the exposed samples (ranging from 32 to 47) was significantly greater (P < 0.05) than that detected in the unexposed (0 time) control sample, where the total number of micronuclei was 7. The number of nucleoplasmic bridges and nuclear buds obtained after 24 and 48 h was also significantly (P < 0.05) greater in the samples treated with p,p'-DDT than in the unexposed control samples. Thus, our results confirmed the usefulness of the new criteria applicable for the CBMN assay employed in measuring the DNA damage and its role of a sensitive cytogenetic biomarker.

L-histidine provokes a state-dependent memory retrieval deficit in mice re-exposed to the elevated plus-maze

The effects of L-histidine (LH) on anxiety and memory retrieval were investigated in adult male Swiss Albino mice (weight 30-35 g) using the elevated plus-maze. The test was performed on two consecutive days: trial 1 (T1) and trial 2 (T2). In T1, mice received an intraperitoneal injection of saline (SAL) or LH before the test and were then injected again and retested 24 h later. LH had no effect on anxiety at the dose of 200 mg/kg since there was no difference between the SAL-SAL and LH-LH groups at T1 regarding open-arm entries (OAE) and open-arm time (OAT) (mean ± SEM; OAE: 4.0 ± 0.71, 4.80 ± 1.05; OAT: 40.55 ± 9.90, 51.55 ± 12.10, respectively; P > 0.05, Kruskal-Wallis test), or at the dose of 500 mg/kg (OAE: 5.27 ± 0.73, 4.87 ± 0.66; OAT: 63.93 ± 11.72, 63.58 ± 10.22; P > 0.05, Fisher LSD test). At T2, LH-LH animals did not reduce open-arm activity (OAE and OAT) at the dose of 200 mg/kg (T1: 4.87 ± 0.66, T2: 5.47 ± 1.05; T1: 63.58 ± 10.22; T2: 49.01 ± 8.43 for OAE and OAT, respectively; P > 0.05, Wilcoxon test) or at the dose of 500 mg/kg (T1: 4.80 ± 1.60, T2: 4.70 ± 1.04; T1: 51.55 ± 12.10, T2: 43.88 ± 10.64 for OAE and OAT, respectively; P > 0.05, Fisher LSD test), showing an inability to evoke memory 24 h later. These data suggest that LH does not act on anxiety but does induce a state-dependent memory retrieval deficit in mice.

Increased immunoglobulin production in silver catfish (Rhamdia quelen) exposed to agrichemicals

Fish vaccination has been increasingly exploited as a tool to control pathogen infection. The production of immunoglobulin following vaccination might be affected by several factors such as management procedures, water temperature, and the presence of xenobiotics. In the present study, we aimed to investigate the kinetics of immunoglobulin production in silver catfish (Rhamdia quelen) inoculated with inactivated Aeromonas hydrophila and kept at two different water temperatures (17.4±0.4° or 21.3±0.3°C). The effect of a second antigen inoculation and exposure of fish to sublethal concentrations of the herbicides atrazine and glyphosate at 10% of the lethal concentration (LC50-96h) on specific serum antibodies were also investigated. Antibodies to A. hydrophila were detected as early as 7 days post-inoculation and increased steadily up to 35 days. The kinetics of antibody production were similar in fish kept at 17.4±0.4° and 21.3±0.3°C, and reinoculation of antigen at 21 days after priming failed to increase specific antibody levels. Intriguingly, we found that, in fish exposed to atrazine and glyphosate, the secretion of specific antibodies was higher than in non-exposed inoculated fish. These findings are important for the design of vaccines and vaccination strategies in Neotropical fish species. However, because atrazine and glyphosate are widespread contaminants of soil and water, their immune-stimulating effect could be harmful, in that fish living in herbicide-contaminated water might have increased concentrations of nonspecific antibodies that could mediate tissue injury.

Nucleotide excision repair pathway assessment in DNA exposed to low-intensity red and infrared lasers

Low-intensity lasers are used for prevention and management of oral mucositis induced by anticancer therapy, but the effectiveness of treatment depends on the genetic characteristics of affected cells. This study evaluated the survival and induction of filamentation of Escherichia coli cells deficient in the nucleotide excision repair pathway, and the action of T4endonuclease V on plasmid DNA exposed to low-intensity red and near-infrared laser light. Cultures of wild-type (strain AB1157) E. coli and strain AB1886 (deficient in uvrA protein) were exposed to red (660 nm) and infrared (808 nm) lasers at various fluences, powers and emission modes to study bacterial survival and filamentation. Also, plasmid DNA was exposed to laser light to study DNA lesions produced in vitro by T4endonuclease V. Low-intensity lasers:i) had no effect on survival of wild-type E. coli but decreased the survival of uvrA protein-deficient cells,ii) induced bacterial filamentation, iii) did not alter the electrophoretic profile of plasmids in agarose gels, andiv) did not alter the electrophoretic profile of plasmids incubated with T4 endonuclease V. These results increase our understanding of the effects of laser light on cells with various genetic characteristics, such as xeroderma pigmentosum cells deficient in nucleotide excision pathway activity in patients with mucositis treated by low-intensity lasers.

Eletrical conductivity and deterioration of soybean seeds exposed to different storage conditions

Research with soybean seeds has revealed that the results of the electrical conductivity test may be influenced by storage temperature, particularly low temperature, such as 10ºC, suggesting that seed deterioration at low storage temperatures does not seem to be directly related to the loss of the cell membrane integrity. This study was conducted with seeds of two soybean cultivars with the objective of: a) studying the effect of different storage temperatures (10ºC; 20ºC; 25ºC; 20/10ºC and 25/10ºC) on the results of the electrical conductivity test; b) observing the behavior of fatty acids and carbohydrates during storage and studying its relation with the electrical conductivity results. Every three months, from a total of 18 months of storage, the physiological quality of seeds was evaluated using the germination, accelerated aging and electrical conductivity tests. Based on the obtained results, it can be concluded that the electrical conductivity test was not shown to be a good indicative of the deterioration process of seeds stored at low temperatures, and no direct relationship between changes in the fatty acids and carbohydrates and the behavior of the mentioned test for seeds stored at 10ºC was found.

Exploring knowledge worker motivation in autonomous and interdependent problem solving tasks on virtual platforms

The objective of this study is to understand why virtual knowledge workers conduct autonomous tasks and interdependent problem solving tasks on virtual platforms. The study is qualitative case study including three case organizations that tap the knowledge of expert networks, and utilize virtual platforms in the work processes. Research data includes 15 interviews, that is, five experts from each case company. According to the findings there are some specific characteristics in motivation to work on tasks on online platforms. Autonomy, self-improvement, meaningful tasks, knowledge sharing, time management, variety of contacts, and variety of tasks, and projects motivate virtual knowledge workers. Factors that may enhance individuals’ engagement to work on tasks are trust, security of continuous task flow and income, feedback, meaningful tasks and tasks that contribute to self-improvement, flexibility and effectiveness in time management, and virtual tools that support social interaction. The results also indicate that there are some differences in individuals’ motivation based on the tasks’ nature. That is, knowledge sharing and variety of contacts motivated experts who worked on interdependent problem solving tasks. Then again, autonomy and variety of tasks motivated experts who worked on autonomous tasks.

Argentina’s Worker-Recovered Factories : strategies and survival

Les usines récupérées par les ouvriers en Argentine sont devenues un mouvement social emblématique symbolisant l'un des aspects de la révolte sociale entourant la crise économique de 2001-2002. Les usines récupérées sont des entreprises abandonnées par leurs propriétaires originaux ou déclarées faillite, laissant derrières elles des salaires et des dettes impayés. Par conséquence, les ouvriers ont commencé à récupérer leurs usines; reprenant la production sans leurs anciens patrons, sous, et au profit de la gestion collective des ouvriers. Le mouvement est remarquable pour sa rémunération égalitaire et sa gestion horizontale. Ce travail examine la continuité des usines récupérées et ceci à travers l'évolution sociale, politique et économique du paysage de l'Argentine. Il évalue également l'impact du mouvement en tant que défi aux modes économiques de production hégémoniques et orientés vers le marché. En supposant que l'avenir du mouvement dépend de deux ensembles de facteurs, le rapport analyse les facteurs internes à travers le prisme de la théorie de mobilisation des ressources, ainsi que les facteurs externes à travers la perspective de la théorie de la structure de l'opportunité politique. Le travail conclut que la situation actuelle se trouve dans une impasse dans laquelle le mouvement a gagné l'acceptation institutionnelle, mais a échoué d'effectuer le changement structurel favorisant ses pratiques et garantissant la sécurité à long terme. Il argumente que le mouvement doit consolider certains aspects combatifs. Il doit consolider sa nouvelle identité en tant que mouvement social et forger des alliances stratégiques et tactiques tout en préservant son autonomie.

La présence de symptômes émotionnels chez l’enfant placé et les liens avec son intégration familiale, sociale et scolaire

Exposés à de multiples facteurs de risque avant et pendant le placement, les enfants placés présentent une prévalence élevée de troubles intériorisés. Ces troubles peuvent entraver leur intégration familiale, sociale et scolaire. L’objectif de ce mémoire est de tracer un portrait des enfants placés présentant des troubles intériorisés afin de mieux les repérer pour ainsi mieux les soutenir, ainsi que les adultes qui en prennent soin. L’échantillon est composé de 62 enfants, âgés de 10 à 12 ans, placés en famille d’accueil régulière et impliqués dans le projet S’Occuper des Enfants (SOCEN). Les données analysées proviennent du Cahier d’évaluation et de suivi (CÉS-C2), outil clinique (avec mesures standardisées) dans lequel l’intervenant, le parent d’accueil et l’enfant inscrivent des informations sur différents aspects du développement de l’enfant. Des variables relatives au placement ainsi que d’autres portant sur l’intégration familiale, sociale et scolaire de l’enfant placé sont mises en relation avec les scores de la sous-échelle des symptômes émotionnels du Strengths and Difficulties Questionnaire à l’aide de corrélations de Pearson et d’ANOVA. Près de 19% des 62 enfants éprouvent des symptômes émotionnels élevés. Les résultats révèlent la forte présence de troubles extériorisés (troubles hyperactifs, troubles de la conduite) chez les enfants placés présentant des symptômes émotionnels élevés. Ces enfants éprouvent aussi plus de problèmes avec les pairs. Ceux qui ont vécu plus de trois placements présentent davantage de symptômes émotionnels élevés.

Interprovincial migration among chinese skilled worker immigrants to Quebec.

The purpose of this research is to find out whether higher levels of education cause the exodus of Quebec’s Chinese skilled worker immigrants to other provinces. I first examine the history of Chinese immigration in Canada; the federal and Quebec’s immigration policies and selection criteria, as well as statistics regarding Chinese migration to Quebec and their out- migration from the province. My study’s ethnographic findings suggest that higher levels of education are not the main cause of the exodus, nor is the lack of French language competence. Rather, kin ties, age, and marital status play an influential role on interprovincial-migration of Quebec’s Chinese skilled immigrants. While based on a small number of respondents, my study indicates that having personal networks in Quebec before immigration tends to retain immigrants in the province.

An Analysis of Work Related Stress Factor in Selected Industries in Kerala ,India

Occupational stress is becoming a major issue in both corporate and social agenda .In industrialized countries, there have been quite dramatic changes in the conditions at work, during the last decade ,caused by economic, social and technical development. As a consequence, the people today at work are exposed to high quantitative and qualitative demands as well as hard competition caused by global economy. A recent report says that ailments due to work related stress is likely to cost India’s exchequer around 72000 crores between 2009 and 2015. Though India is a fast developing country, it is yet to create facilities to mitigate the adverse effects of work stress, more over only little efforts have been made to assess the work related stress.In the absence of well defined standards to assess the work related stress in India, an attempt is made in this direction to develop the factors for the evaluation of work stress. Accordingly, with the help of existing literature and in consultation with the safety experts, seven factors for the evaluation of work stress is developed. An instrument ( Questionnaire) was developed using these seven factors for the evaluation of work stress .The validity , and unidimensionality of the questionnaire was ensured by confirmatory factor analysis. The reliability of the questionnaire was ensured before administration. While analyzing the relation ship between the variables, it is noted that no relationship exists between them, and hence the above factors are treated as independent factors/ variables for the purpose of research .Initially five profit making manufacturing industries, under public sector in the state of Kerala, were selected for the study. The influence of factors responsible for work stress is analyzed in these industries. These industries were classified in to two types, namely chemical and heavy engineering ,based on the product manufactured and work environment and the analysis is further carried out for these two categories.The variation of work stress with different age , designation and experience of the employees are analyzed by means of one-way ANOVA. Further three different type of modelling of work stress, namely factor modelling, structural equation modelling and multinomial logistic regression modelling was done to analyze the association of factors responsible for work stress. All these models are found equally good in predicting the work stress.The present study indicates that work stress exists among the employees in public sector industries in Kerala. Employees belonging to age group 40-45yrs and experience groups 15-20yrs had relatively higher work demand ,low job control, and low support at work. Low job control was noted among lower designation levels, particularly at the worker level in these industries. Hence the instrument developed using the seven factors namely demand, control, manager support, peer support, relationship, role and change can be effectively used for the evaluation of work stress in industries.

Growth response of phytoplankton exposed to industrial effluents in river Periyar

The thesis entitled Growth Response of Phytoplankton Exposed to Industrial Effluents in River Periyar. The present investigation has been conducted in two phases: field observation and algal assays. The monthly distribution of hydrographic features is represented graphically. The sampling year has been divided into three seasons: monsoon (June to September), postmonsoon (October to January) and premonsoon (February to May). The data were analysed using Student's t-test to find whether there was any significant difference between surface and bottom samples. The spatial variation of the variables was assessed by Page's L (trend) test (Ray Meddis, 1975). The standard procedure for algal toxicity test (Ward and Parrish, 1982) was followed throughout the study. Statistical analysis (Page's L (trend) test) showed that there was no significant difference in Secchi disc transparency between the stations. The field observations as well as the laboratory assays confirm that the rate of discharge in river Periyar during premonsoon is insufficient to effect dilution of wastewater received in the industrial zone.

Behavior of geopolymer concrete exposed to elevated temperatures

The research in the area of geopolymer is gaining momentum during the past 20 years. Studies confirm that geopolymer concrete has good compressive strength, tensile strength, flexural strength, modulus of elasticity and durability. These properties are comparable with OPC concrete.There are many occasions where concrete is exposed to elevated temperatures like fire exposure from thermal processor, exposure from furnaces, nuclear exposure, etc.. In such cases, understanding of the behaviour of concrete and structural members exposed to elevated temperatures is vital. Even though many research reports are available about the behaviour of OPC concrete at elevated temperatures, there is limited information available about the behaviour of geopolymer concrete after exposure to elevated temperatures. A preliminary study was carried out for the selection of a mix proportion. The important variable considered in the present study include alkali/fly ash ratio, percentage of total aggregate content, fine aggregate to total aggregate ratio, molarity of sodium hydroxide, sodium silicate to sodium hydroxide ratio, curing temperature and curing period. Influence of different variables on engineering properties of geopolymer concrete was investigated. The study on interface shear strength of reinforced and unreinforced geopolymer concrete as well as OPC concrete was also carried out. Engineering properties of fly ash based geopolymer concrete after exposure to elevated temperatures (ambient to 800 °C) were studied and the corresponding results were compared with those of conventional concrete. Scanning Electron Microscope analysis, Fourier Transform Infrared analysis, X-ray powder Diffractometer analysis and Thermogravimetric analysis of geopolymer mortar or paste at ambient temperature and after exposure to elevated temperature were also carried out in the present research work. Experimental study was conducted on geopolymer concrete beams after exposure to elevated temperatures (ambient to 800 °C). Load deflection characteristics, ductility and moment-curvature behaviour of the geopolymer concrete beams after exposure to elevated temperatures were investigated. Based on the present study, major conclusions derived could be summarized as follows. There is a definite proportion for various ingredients to achieve maximum strength properties. Geopolymer concrete with total aggregate content of 70% by volume, ratio of fine aggregate to total aggregate of 0.35, NaOH molarity 10, Na2SiO3/NaOH ratio of 2.5 and alkali to fly ash ratio of 0.55 gave maximum compressive strength in the present study. An early strength development in geopolymer concrete could be achieved by the proper selection of curing temperature and the period of curing. With 24 hours of curing at 100 °C, 96.4% of the 28th day cube compressive strength could be achieved in 7 days in the present study. The interface shear strength of geopolymer concrete is lower to that of OPC concrete. Compared to OPC concrete, a reduction in the interface shear strength by 33% and 29% was observed for unreinforced and reinforced geopolymer specimens respectively. The interface shear strength of geopolymer concrete is lower than ordinary Portland cement concrete. The interface shear strength of geopolymer concrete can be approximately estimated as 50% of the value obtained based on the available equations for the calculation of interface shear strength of ordinary portland cement concrete (method used in Mattock and ACI). Fly ash based geopolymer concrete undergoes a high rate of strength loss (compressive strength, tensile strength and modulus of elasticity) during its early heating period (up to 200 °C) compared to OPC concrete. At a temperature exposure beyond 600 °C, the unreacted crystalline materials in geopolymer concrete get transformed into amorphous state and undergo polymerization. As a result, there is no further strength loss (compressive strength, tensile strength and modulus of elasticity) in geopolymer concrete, whereas, OPC concrete continues to lose its strength properties at a faster rate beyond a temperature exposure of 600 °C. At present no equation is available to predict the strength properties of geopolymer concrete after exposure to elevated temperatures. Based on the study carried out, new equations have been proposed to predict the residual strengths (cube compressive strength, split tensile strength and modulus of elasticity) of geopolymer concrete after exposure to elevated temperatures (upto 800 °C). These equations could be used for material modelling until better refined equations are available. Compared to OPC concrete, geopolymer concrete shows better resistance against surface cracking when exposed to elevated temperatures. In the present study, while OPC concrete started developing cracks at 400 °C, geopolymer concrete did not show any visible cracks up to 600 °C and developed only minor cracks at an exposure temperatureof 800 °C. Geopolymer concrete beams develop crack at an early load stages if they are exposed to elevated temperatures. Even though the material strength of the geopolymer concrete does not decrease beyond 600 °C, the flexural strength of corresponding beam reduces rapidly after 600 °C temperature exposure, primarily due to the rapid loss of the strength of steel. With increase in temperature, the curvature at yield point of geopolymer concrete beam increases and thereby the ductility reduces. In the present study, compared to the ductility at ambient temperature, the ductility of geopolymer concrete beams reduces by 63.8% at 800 °C temperature exposure. Appropriate equations have been proposed to predict the service load crack width of geopolymer concrete beam exposed to elevated temperatures. These equations could be used to limit the service load on geopolymer concrete beams exposed to elevated temperatures (up to 800 °C) for a predefined crack width (between 0.1mm and 0.3 mm) or vice versa. The moment-curvature relationship of geopolymer concrete beams at ambient temperature is similar to that of RCC beams and this could be predicted using strain compatibility approach Once exposed to an elevated temperature, the strain compatibility approach underestimates the curvature of geopolymer concrete beams between the first cracking and yielding point.

Exploiting the Parallelism Exposed by Partial Evaluation

We describe the key role played by partial evaluation in the Supercomputing Toolkit, a parallel computing system for scientific applications that effectively exploits the vast amount of parallelism exposed by partial evaluation. The Supercomputing Toolkit parallel processor and its associated partial evaluation-based compiler have been used extensively by scientists at MIT, and have made possible recent results in astrophysics showing that the motion of the planets in our solar system is chaotically unstable.