Fabrication of Three-Dimensional Dendritic Ni-Co Films By Electrodeposition on Stainless Steel Substrates

Co-deposition of nickel and cobalt was carried out on austenitic stainless steel (AISI 304) substrates by imposing a square waveform current in the cathodic region. The innovative procedure applied in this work allows creating a stable, fully developed, and open porous three-dimensional (3D) dendritic structure, which can be used as electrode for redox supercapacitors. This study investigates in detail the influence of the applied current density on the morphology, mass, and chemical composition of the deposited Ni-Co films and the resulting 3D porous network dendritic structure. The morphology and the physicochemical composition were studied by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (W). The electrochemical behavior of the materials was evaluated by cyclic voltammetry (CV). The results highlight the mechanism involved in the coelectrodeposition process and how the lower limit current density tailors the film composition and morphology, as well as its electrochemical activity.

Multi-dimensional scaling applied to histogram-based DNA analysis

This paper aims to study the relationships between chromosomal DNA sequences of twenty species. We propose a methodology combining DNA-based word frequency histograms, correlation methods, and an MDS technique to visualize structural information underlying chromosomes (CRs) and species. Four statistical measures are tested (Minkowski, Cosine, Pearson product-moment, and Kendall τ rank correlations) to analyze the information content of 421 nuclear CRs from twenty species. The proposed methodology is built on mathematical tools and allows the analysis and visualization of very large amounts of stream data, like DNA sequences, with almost no assumptions other than the predefined DNA “word length.” This methodology is able to produce comprehensible three-dimensional visualizations of CR clustering and related spatial and structural patterns. The results of the four test correlation scenarios show that the high-level information clusterings produced by the MDS tool are qualitatively similar, with small variations due to each correlation method characteristics, and that the clusterings are a consequence of the input data and not method’s artifacts.

Medicamentos termoláveis: estabilidade após ruptura da cadeia de frio

Introdução. O Técnico de Farmácia entre as suas funções, tem a responsabilidade de garantir a conservação adequada dos medicamentos em todo o seu circuito. Deste modo, devem ser aplicados numa Instituição Hospitalar cuidados especiais desde a recepção da encomenda até à dispensa dos produtos termoláveis para os Serviços Clínicos. Pelo potencial impacto clínico e económico, é necessário ser apresentado um protocolo para a manutenção da cadeia de frio de forma a agir devidamente em caso de ruptura da cadeia de frio. Tal protocolo deve incluir, entre outras informações, uma lista de estabilidade dos diferentes medicamentos com o tempo e a temperatura a que podem ser expostos. Como tal, este estudo pretende estabelecer um procedimento padronizado, para agir em caso de ruptura da cadeia de frio, sobre a estabilidade de cada medicamento. Material e Métodos. O estudo carateriza-se como sendo uma revisão de literatura, de modo a compilar informação sobre um tema de acordo com um conjunto de critérios estabelecidos. A pesquisa incidiu sobre todos os produtos termoláveis existentes na instituição, com excepção dos medicamentos manipulados não estéreis que necessitam de refrigeração. Os critérios de análise destacados para a pesquisa foram o príncipio activo, nome comercial, laboratório produtor e a estabilidade à temperatura ambiente. Resultados. Para a realização do trabalho foi construída uma tabela resumo dos dados obtidos: produto versus critérios de análise, tendo sido analisados um total de 199 produtos. Discussão / Conclusões: As informações relativas à estabilidade dos produtos termoláveis permitem conhecer a segurança no seu uso em caso de ruptura da cadeia de frio, sendo que esses dados só devem ser aplicados em situações extremamente necessárias e não por rotina. Contrariamente ao esperado, este tipo de informação não se encontra frequentemente disponível no Resumo de Características do Medicamento assim como nos Folhetos Informativos, tornando difícil o acesso a esta informação. É ainda de ressalvar que o trabalho deverá ser actualizado continuamente, para a qualquer momento ser consultado, quer pela inexistência de informação para todos os produtos disponíveis nos Serviços Farmacêuticos, bem como pela possível e constante mudança de produtos ou laboratórios que existam na Instituição.

Three-dimensional patchy lattice model for empty fluids

The phase diagram of a simple model with two patches of type A and ten patches of type B (2A10B) on the face centred cubic lattice has been calculated by simulations and theory. Assuming that there is no interaction between the B patches the behavior of the system can be described in terms of the ratio of the AB and AA interactions, r. Our results show that, similarly to what happens for related off-lattice and two-dimensional lattice models, the liquid-vapor phase equilibria exhibit reentrant behavior for some values of the interaction parameters. However, for the model studied here the liquid-vapor phase equilibria occur for values of r lower than 1/3, a threshold value which was previously thought to be universal for 2AnB models. In addition, the theory predicts that below r = 1/3 (and above a new condensation threshold which is < 1/3) the reentrant liquid-vapor equilibria are so extreme that it exhibits a closed loop with a lower critical point, a very unusual behavior in single-component systems. An order-disorder transition is also observed at higher densities than the liquid-vapor equilibria, which shows that the liquid-vapor reentrancy occurs in an equilibrium region of the phase diagram. These findings may have implications in the understanding of the condensation of dipolar hard spheres given the analogy between that system and the 2AnB models considered here. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4771591]

Estudo geológico e geotécnico de taludes rochosos em S. Pedro da Afurada (Vila Nova de Gaia): contributos para a avaliação da estabilidade estrutural

Mestrado em Engenharia Geotécnica e Geoambiente

Study of the one dimensional and transient bioheat transfer equation: Multi-layer solution development and applications

: In this work we derive an analytical solution given by Bessel series to the transient and one-dimensional (1D) bioheat transfer equation in a multi-layer region with spatially dependent heat sources. Each region represents an independent biological tissue characterized by temperature-invariant physiological parameters and a linearly temperature dependent metabolic heat generation. Moreover, 1D Cartesian, cylindrical or spherical coordinates are used to define the geometry and temperature boundary conditions of first, second and third kinds are assumed at the inner and outer surfaces. We present two examples of clinical applications for the developed solution. In the first one, we investigate two different heat source terms to simulate the heating in a tumor and its surrounding tissue, induced during a magnetic fluid hyperthermia technique used for cancer treatment. To obtain an accurate analytical solution, we determine the error associated with the truncated Bessel series that defines the transient solution. In the second application, we explore the potential of this model to study the effect of different environmental conditions in a multi-layered human head model (brain, bone and scalp). The convective heat transfer effect of a large blood vessel located inside the brain is also investigated. The results are further compared with a numerical solution obtained by the Finite Element Method and computed with COMSOL Multi-physics v4.1 (c). (c) 2013 Elsevier Ltd. All rights reserved.

Estudo da estabilidade térmica da pele

Mestrado em Engenharia Química

Bi-Dimensional Characterization of a Wimax Radio Channel at 3.5GHz

This paper presents the characterization of an indoor Wimax radio channel using the Finite-Difference Time-Domain (FDTD) [1] method complemented with the Convolutional Perfect Matched Layer (CPML) technique [2]. An indoor 2D scenario is simulated in the 3.5GHz band (IEEE 802.16d-2004 and IEEE 802.16e-2005 [3]). In this study, we used two complementary techniques in both analysis, technique A and B for fading based on delay spread and technique C and D for fading based on Doppler spread. Both techniques converge to the same result. Simulated results define the channel as flat, slow and without inter-symbolic interference (ISI), making the application of the spatial diversity the most appropriate scheme.

Variabilidade dos limites de estabilidade na posição ortostática em utentes com Acidente Vascular Encefálico

Introdução: O controlo postural (CP), intimamente ligado aos limites de estabilidade, é fundamental nas atividades da vida diária e encontra-se comprometido após Acidente Vascular Encefálico (AVE). Objectivo: Descrever as alterações nos limites de estabilidade, na posição ortostática, em utentes com AVE, face à aplicação de um programa de intervenção baseado num processo de raciocínio clínico. Métodos: Estudo de série de casos, de três indivíduos com alterações do CP do tronco e/ou das grandes articulações, decorrentes de AVE, mas capazes de assumir e manter a posição ortostática. Para avaliar os limites de estabilidade foram utilizados a plataforma de pressões Emed (coordenadas do centro de pressão, COPx e COPy) e o MultidirectionalReachTest (MDRT). Foram também aplicadas, a Fugl-Meyer Assessmentof Sensoriomotor Recovery After Stroke (FMA) e a Berg Balance Scale (BBS). Os instrumentos de avaliação foram aplicados antes e após a intervenção (M0 e M1), de 8 semanas, baseada nos princípios do conceito de Bobath. Resultados: Os valores dos testes de alcance no MDRT aumentaram em todos os utentes. Os limites e os deslocamentos médio-lateral (COPx) e, ântero-posterior (COPy) dos valores do CPr aumentaram, entre M0 e M1. No que se refere à FMA e a BBS, verificou-se que todos apresentaram um aumento dos scores. Conclusão: Os utentes modificaram os seus limites de estabilidade no sentido do aumento, assim como, da função motora e do equilíbrio. Deste modo, a intervenção de acordo com os princípios do conceito de Bobath aparenta introduzir os estímulos necessários à reorganização funcional do sistema nervoso central lesado.

Análise de estabilidade do talude do Salto do Fojo com recurso a métodos determinísticos

Dissertação de Mestrado, Geologia do Ambiente e Sociedade, 20 de Outubro de 2015, Universidade dos Açores.

Colloidal interactions in two-dimensional nematics

The interaction between two disks immersed in a 2D nernatic is investigated i) analytically using the tenser order parameter formalism for the nematic configuration around isolated disks and ii) numerically using finite-element methods with adaptive meshing to minimize the corresponding Landau-de Gennes free energy. For strong homeotropic anchoring, each disk generates a pair of defects with one-half topological charge responsible for the 2D quadrupolar interaction between the disks at large distances. At short distance, the position of the defects may change, leading to unexpected complex interactions with the quadrupolar repulsive interactions becoming attractive. This short-range attraction in all directions is still anisotropic. As the distance between the disks decreases, their preferred relative orientation with respect to the far-field nernatic director changes from oblique to perpendicular.

Three-dimensional modeling of tongue during speech using MRI data

The tongue is the most important and dynamic articulator for speech formation, because of its anatomic aspects (particularly, the large volume of this muscular organ comparatively to the surrounding organs of the vocal tract) and also due to the wide range of movements and flexibility that are involved. In speech communication research, a variety of techniques have been used for measuring the three-dimensional vocal tract shapes. More recently, magnetic resonance imaging (MRI) becomes common; mainly, because this technique allows the collection of a set of static and dynamic images that can represent the entire vocal tract along any orientation. Over the years, different anatomical organs of the vocal tract have been modelled; namely, 2D and 3D tongue models, using parametric or statistical modelling procedures. Our aims are to present and describe some 3D reconstructed models from MRI data, for one subject uttering sustained articulations of some typical Portuguese sounds. Thus, we present a 3D database of the tongue obtained by stack combinations with the subject articulating Portuguese vowels. This 3D knowledge of the speech organs could be very important; especially, for clinical purposes (for example, for the assessment of articulatory impairments followed by tongue surgery in speech rehabilitation), and also for a better understanding of acoustic theory in speech formation.

Synchronization and Basins of Synchronized in Two-Dimensional Piecewise Maps Via Coupling Three Pieces of One-Dimensional Maps

This paper is devoted to the synchronization of a dynamical system defined by two different coupling versions of two identical piecewise linear bimodal maps. We consider both local and global studies, using different tools as natural transversal Lyapunov exponent, Lyapunov functions, eigenvalues and eigenvectors and numerical simulations. We obtain theoretical results for the existence of synchronization on coupling parameter range. We characterize the synchronization manifold as an attractor and measure the synchronization speed. In one coupling version, we give a necessary and sufficient condition for the synchronization. We study the basins of synchronization and show that, depending upon the type of coupling, they can have very different shapes and are not necessarily constituted by the whole phase space; in some cases, they can be riddled.

Projecto de estabilidade de um edifício de habitação multifamiliar

O presente trabalho integra-se no âmbito dos requisitos definidos na unidade curricular DIPRE que faz parte do 2º ano do Curso de Mestrado em Tecnologia e Gestão das Construções do Instituto Superior de Engenharia do Porto do Politécnico do Porto. Este trabalho consistiu na elaboração do projecto de estabilidade de um edifício de habitação multifamiliar, tendo-se também realizado uma análise comparativa de dois programas de cálculo estrutural. O trabalho foi subdividido em parte escrita e parte desenhada. Sendo a primeira constituída pelos seguintes capítulos: 1 – Memória descritiva e justificativa de cálculo 2 – Mapa de quantidades de trabalho e de materiais 3 – Estimativa orçamental 4 – Condições técnicas do projecto de fundações e estruturas A parte desenhada incluí 16 desenhos, representativos dos esquemas estruturais adoptados e dos pormenores construtivos dos elementos estruturais

A one-dimensional prescribed curvature equation modeling the corneal shape

We prove existence, uniqueness, and stability of solutions of the prescribed curvature problem (u'/root 1 + u'(2))' = au - b/root 1 + u'(2) in [0, 1], u'(0) = u(1) = 0, for any given a > 0 and b > 0. We also develop a linear monotone iterative scheme for approximating the solution. This equation has been proposed as a model of the corneal shape in the recent paper (Okrasinski and Plociniczak in Nonlinear Anal., Real World Appl. 13:1498-1505, 2012), where a simplified version obtained by partial linearization has been investigated.