919 resultados para Discrepancia transversal maxilar
Resumo:
The residual alveolar ridges may be unfavorable for implant placement. The edentulous maxilla is often challenging for the oral surgeon because of the lack of bone as a consequence of alveolar ridge resorption and/or maxillary sinus pneumatization. Accidents or complications may occur when some of these issues are not being known. This article reports one case of implant displaced into the maxillary sinus, 27 days after sinus bone augmentation with simultaneous dental implant installation, causing moderated sinusitis symptoms. The implant was removed through oral cavity access to maxillary sinus.
Resumo:
In many oral rehabilitation professionals seeking venture renew people smile. However, these procedures have functional implications and aesthetic criteria which must be satisfied so that the final result is predictable. The restoration of relations intermaxillary, phonetics, masticatory function, esthetics and patient comfort are the goals to be achieved. An effective way to achieve these goals when immediate reconstruction with permanent dentures is not possible, make use of a type of partial denture called overlay. Bruxism is a manifestation of biopsychological imbalance that affects the stomatognathic system, characterized by clenching and / or attrition of teeth together so centric or eccentric, can be manifestation of nocturnal or diurnal. Its effects can manifest themselves in different parts of the stomatognathic system, varying the severity of the damage as the resistance of the structures affected, the time of existence, its regularity and the general state of the wearer. The description of the steps followed in solving this case, in which the patient edentulous mandibular arch while the maxillary arch showed absence of teeth 16 and 26 and, except for the teeth 17 and 27, all other teeth showed wear very sharp in the sense denoting incisal cervical, severe impairment of the vertical dimension, the quality of masticatory function and a marked impairment phonetic, this case report aims to guide the beginning of a rehabilitation, as well as the transitional phase of treatment for recovery of functional and aesthetic relationships intermaxillary .
Avaliação clínica e radiográfica de pacientes submetidos ao levantamento da membrana do seio maxilar
Resumo:
Implant dentistry is a dental specialty which presents great predictability in the rehabilitation at posterior, partially edentulous maxillary areas. Early tooth loss results in significant jaw remodeling. The maxillary sinus lifting followed by implant placement is a predictable technique initially described in 1980. Since then, several different techniques have been investigated varying filling materials and the management of complications in order to provide effective guidance in the rehabilitation of these patients. The current study evaluated ten patients who underwent sinus lifting before implant placement and crown installation. First, a retrospective analysis of the medical records was conducted to obtain information about possible postoperative complications. Clinical and radiographic analyses were performed at baseline and 180 days after surgeries. The sinus lifting with immediate implant placement provided satisfactory outcomes and can be considered a safe procedure. Treatment predictability was demonstrated in 90% of patients and for 86.96% of implants placed. It is important to highlight knowledge of anatomical structures at this area, the use of delicate surgical techniques, and strict patient follow-up.
Resumo:
Maxillary sinus lifting surgery is considered an excellent option for patient rehabilitation in cases of maxillary sinus pneumatization. This longitudinal study was performed in 41 patients to evaluate 51 maxillary sinus lifting procedures concomitant to autogenous bone grafted from mandibular ramus. Of the 107 implants installed, 28 were immediate fixations. Success index achieved regarding to bone graft was of 98.04%. The implants installed immediately or after bone grafting resulted in success rates of 92.86% and 94.59% respectively, with no statistically significant differences between them. Surgeries for bone grafting and immediate installation are considered a reliable treatment alternative provided that both anatomical structures and tissue physiology are kept in good conditions, with appropriate indication and techniques for good implant stability.
Resumo:
Pós-graduação em Odontologia - FOA
Resumo:
Pós-graduação em Fisioterapia - FCT
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
According to Statistical Yearbook of Social Security (2011), the number of accidents at work recorded in the agricultural sector is quite high, in the year 2010 there are records of thirty-four thousand nine hundred and ninetysix accidents, and in the year of 2011 there were thirty-one thousand and ninety-six accidents in the industry. Among so many diseases and accidents at work hearing loss is one of them. According to the Pan American Health Organization (2011) the Occupational hearing loss is then jury to the worker's health, often in the workplace. Mechanical vibrations are also present in many human activities exposing employees to an extremely aggressive agent. The combined action of these two factors can cause damage to the health of the worker, in this way, noise and vibration are the two major occupational agents present in the brush cutter operator activity. In the case there is another risk factor, the open work, which exposes the employee to the Sun’s rays and the high temperature indices. Studies have shown that: noise exceeds 115 dB (A) vibration 4.0 m/s2 and thermal stress of 29.9 o C. Ergonomic evaluations also demonstrated that the activity cause injury to workers.
Resumo:
Recent research seeking to elucidate the possible effects of different types of physical training on the morphological adaptations of skeletal muscle. Although it is relatively easy to study the effects of exercise training in humans, such research becomes limited due to the invasive nature of the biopsies and the risk inherent in the use of human subjects. Thus, the application of animal models of training has been considered an appropriate strategy for the study of muscular adaptations in response to exercise. Objective: This study used a rodent model to determine the possible effects of aerobic and strength training on the CSA of fibers of the plantaris muscle. Methods: 24 male Wistar rats (80 to 120 days, 250 to 400 g) were randomly divided into 3 groups: aerobic training (TA, n = 8), strength training (ST, n = 8) and control (CO, n = 8). The animals in groups TA and TF were subjected to 8 weeks of training, while the animals of group C remained without any stimulus from start to finish the training period. At the end of the experiment, the animals were sacrificed and right plantar muscles dissected and removed. For morphological and morphometric analysis of muscle fibers was performed staining was performed H.E. Results: There was no significant difference in initial body weight between experimental groups. After 8 weeks of training, the TA group showed a significant reduction in final body weight, compared to CO and TF groups. With respect to the CSA of fibers of the plantaris muscle, no significant difference between the groups CO and TA. On the other hand, the strength training promoted a significant increase in AST of the group TF in compared with the groups CO and TA. Conclusion: Strength training used in this study promoted an increase in CSA of fibers of the plantaris muscle. On the other hand, animals submitted to aerobic training showed no changes in the CSA of the fibers, however, there was reduction in PC animals. The data strongly suggest the use of animal model of strength training used in this study as an appropriate strategy for studying the hypertrophic response of skeletal muscle.
Resumo:
There are regulations that establish conditions and enable the design of armor columns. The NBR 6118 features statements relating to the transverse reinforcement as spacing, reinforcement diameters provision in structural elements and others. However, the norm in force does not provide an explicit methodology for the design of stirrups in different situations. We do not propose even a calculation model for this equipment and provides normative considerations for maximum or minimum values of spacings and armor in diameter. It is noteworthy that the classical references also do not provide a calculation routine sizing of transverse reinforcement and only makes the checks as the normative conditions for the given data. Based on this assumption and the problems that may occur in sizing error, both for spacing and for the proposal of the stirrup diameter, this study demonstrates that armor calculation method already established in the literature and then through an intuitive tool and available develops a spreadsheet based on this calculation routine. It takes as reference the one developed by Emil Moersch (1902) and the calculation model proposed by BUFFONI E SILVA (2006). Finally the paper presents a rational design of shear reinforcement and confronts these values with some numerical examples to show its truth
Resumo:
Pós-graduação em Saúde Coletiva - FMB
Resumo:
There are regulations that establish conditions and enable the design of armor columns. The NBR 6118 features statements relating to the transverse reinforcement as spacing, reinforcement diameters provision in structural elements and others. However, the norm in force does not provide an explicit methodology for the design of stirrups in different situations. We do not propose even a calculation model for this equipment and provides normative considerations for maximum or minimum values of spacings and armor in diameter. It is noteworthy that the classical references also do not provide a calculation routine sizing of transverse reinforcement and only makes the checks as the normative conditions for the given data. Based on this assumption and the problems that may occur in sizing error, both for spacing and for the proposal of the stirrup diameter, this study demonstrates that armor calculation method already established in the literature and then through an intuitive tool and available develops a spreadsheet based on this calculation routine. It takes as reference the one developed by Emil Moersch (1902) and the calculation model proposed by BUFFONI E SILVA (2006). Finally the paper presents a rational design of shear reinforcement and confronts these values with some numerical examples to show its truth
Resumo:
Pós-graduação em Saúde Coletiva - FMB
Resumo:
Centrifugal spreaders dominate the application of solid materials in agriculture offering expressive operational field capacity and extended range of applied rates. Field tests for characterization of theirperformance are conducted without any physical obstacles (such as the presence of plants) during the parabolic trajectory of the falling particles of fertilizer to the soil. The purpose of this study was to comparatively evaluate the transverse distribution of solid fertilizers applied on cropped corn, soybeans and cotton. Evaluations of the spreaders were designed according to ASAE S341.3/99 Standard. Tests consisted in aligning side by side collectors in-between the cropped rows and weighting the material deposited. The results showed that transverse distribution of solid fertilizers applied over the cotton and corn crops is affected by the crop height, interfering directly on the effective width of the spreader application, which was not observedin the soybean crop, once the fertilizer application is done when the crop was still below the collector's height. The results suggest that evaluation of effective width of the spreaders application need to be done under real crop environment.
Resumo:
Introduction: The treatment of adult transverse maxillary deficiency is the surgically assisted maxillary expansion. Several surgical techniques have been described for this and complications have been related to these procedures. Objective: the aim of this study was evaluate the incidence of complications associated with surgically assisted maxillary expansion. Material and method: 33 individuals undergone surgically assisted maxillary expansion by subtotal Le Fort I osteotomy with a step in the zygomatic-maxillary buttress and associated to pterigomaxillary disjunction and osteotomy of intermaxillary suture. Operative complications, post-operative complications and the distance between the upper teeth were recorded. Result: 12 men and 21 women with an average age of 24.64 years undergone the procedure. The interdental distances increased from preoperative to 2 months post?operative time. The prevalent complications were sinusitis (6%) and teeth displacement and inclination (6%). Conclusion: Surgically assisted maxillary expansion is an effective and low morbidity procedure to treat transverse maxillary deficiency in adults.