Estudo da moagem de alta energia e sinterização de pós compósitos W-Cu

The Tungsten/copper composites are commonly used for electrical and thermal objectives like heat sinks and lectrical conductors, propitiating an excellent thermal and electrical conductivity. These properties are dependents of the composition, crystallite size and production process. The high energy milling of the powder of W-Cu produces an dispersion high and homogenization levels with crystallite size of W very small in the ductile Cu phase. This work discusses the effect of the HEM in preparation of the W-25Cu composite powders. Three techniques of powder preparation were utilized: milling the dry with powder of thick Cu, milling the dry with powder of fine Cu and milling the wet with powder of thick Cu. The form, size and composition of the particles of the powders milled were observed by scanning electron microscopy (SEM). The X-ray diffraction (XRD) was used to analyse the phases, lattice parameters, size and microstrain of the crystallite. The analyse of the crystalline structure of the W-25Cu powders milled made by Rietveld Method suggests the partial solid solubility of the constituent elements of the Cu in lattice of the W. This analyse shows too that the HEM produces the reduction high on the crystallite size and the increase in the lattice strain of both phases, this is more intense in the phase W

Síntese e caracterização do líquido iônico tetrafluoroborato de 1-metil-3-(2,6-(S)-dimetiloct-2-eno)-imidazol como eletrólito para produção de hidrogênio via eletrólise da água

Ionic liquids (ILs) are organic compounds liquid at room temperature, good electrical conductors, with the potential to form as a means for electrolyte on electrolysis of water, in which the electrodes would not be subjected to such extreme conditions demanding chemistry [1]. This paper describes the synthesis, characterization and study of the feasibility of ionic liquid ionic liquid 1-methyl-3(2,6-(S)-dimethyloct-2-ene)-imidazole tetrafluoroborate (MDI-BF4) as electrolyte to produce hydrogen through electrolysis of water. The MDI-BF4 synthesized was characterized by thermal methods of analysis (Thermogravimetric Analysis - TG and Differential Scanning Calorimetry - DSC), mid-infrared spectroscopy with Fourier transform by method of attenuated total reflectance (FTIR-ATR), nuclear magnetic resonance spectroscopy of hydrogen (NMR 1H) and cyclic voltammetry (CV). Where thermal methods were used to calculate the yield of the synthesis of MDI-BF4 which was 88.84%, characterized infrared spectroscopy functional groups of the compound and the binding B-F 1053 cm-1; the NMR 1H analyzed and compared with literature data defines the structure of MDI-BF4 and the current density achieved by MDI-BF4 in the voltammogram shows that the LI can conduct electrical current indicating that the MDI-BF4 is a good electrolyte, and that their behavior does not change with the increasing concentration of water

Riscos ocupacionais e acidentes de trabalho em um serviço de atendimento móvel de urgência do Rio Grande do Norte

Exploratory, descriptive and quantitative study with prospective data, performed in the Mobile Emergency Care Service in the metropolitan region of Natal/RN, in order to identify the knowledge of the multidisciplinary team about the rules of standard precautions and worker safety, to identify occupational hazards peculiar to the activities of this service; characterize work-related accidents (WRA) and know the procedures adopted after each WRA. The population consisted of 162 professionals and data were collected between the months of November and December 2010. As for personal and professional characteristics, of the 162 professional, 12,96% were physicians; 6,79%, nurses; 33,95%, nursing technicians, 46,29%, conductors; 74,70% were male; 43,21% were between 31 and 40 years old; 69,33% lived in Natal/RN, 50,00% had completed high school; 58,64% were married; 69,75% had children, 46,91% were between 1 and 4 years of training; 61,73% had improvement courses; 59,25% had 3 to 4 years of service; 54,32%, with 1-4 years experience in emergency; 44,44% received 1-2 minimum wages; 78,40% received insalubrity premium; 67,28% worked in Basic Support Unit (BSU); 83,95% had journey on SAMU Metropolitano of 31-40 hours per week; 52,47% had other employments. As for knowledge of rules of standard precautions, safety and occupational hazards, 99,38% knew what it was WRA; 62,96% gave incomplete answers; 74,07% knew the rules of prevent WRA; 46,67% acquired this knowledge in lectures; 53,09% knew Personal Protective Equipment (PPE); 71,60% gave incorrect answers about the importance of standard precautions; 45,06% never received an educational intervention on this issue; 89,51% said that educational interventions in the prevention of WRA are very important; 90,12% pointed out this as a very important issue in the workplace; 27,00% suggested guidance on the topic in the workplace; regarding the physical hazards, 34,57% considered noise as the most important; about chemical hazards, 78,40% chose the gases and smoke; for biological hazards, 48,77% reported contact with the blood; for mechanical hazards, 80,86% said that were transport accidents; about ergonomic risks, 40,12% say it is the tension/stress in the care of critically ill, psychiatric and aggressive patients; and there was an average of 4,5 to the feeling of safety in the workplace. Regarding the data on the WRAs occurred, 31,48% experienced at least one accident event; 72,55% did not notify it; 60,98% answered that there was no routine for notification; 56,86% were performing patient transportation; 49,02% were hurt in the Basic Support Unit/Rescue Unit (BSU/RH); 60,78% occurred during the day; 96,08% of professionals were in normal work schedule (24 hours on duty); 31,37% had contusion; 58.82% had damage to members/pelvic girdle; 43,14% had traffic accidents. About the evolution of the WRA, 62,75% did not have to take time away from work; 76,47% had no sequelae; 88,24% did not require rehabilitation; no professional had a change of occupation. And by means of univariate logistic regression, showed that the nurses and male sex were risk factors for the occurrence of WRA. We conclude that there were gaps in the knowledge of staff regarding WRA, emphasizing the need for continuing education in biosafety in the service.

Gestão do Conhecimento baseado na análise de GAP de competências: Um estudo de caso do DETRAN-RN

The Knowledge Management in organizations is a continuous process of learning that is given by the integration of data, information and the ability of people to use this information. The Management Skills is concerned to understand the powers of officials in the face of organizational skills (teams) and professionals (or tasks positions) want. Joints are located in the greater context of the economy of organizatio s and have the same assumption: that the possession of scarce resources, valuable and difficult to imitate gives the organization a competitive advantage. In this sense, this thesis proposes a model of knowledge management based on analysis of GAP of powers, namely the gap between the skills needed to reach the expected performance and skills already available in the organization, officials and trainees of Coordination of Registration of conductors of DETRAN-RN. Using the method of survey research could make an analysis of academic skills, techniques and emotional individual and a team of officials and trainees, identifying levels of GAP's competence in that sector of the organization and suggest a plan for training , A level of expertise for each sector of coordination, and propose a model for Knowledge Management to help the management of GAP's identified

Análise e otimização de superfícies seletivas de Frequência utilizando redes neurais artificiais e algoritmos de otimização natural

The bidimensional periodic structures called frequency selective surfaces have been well investigated because of their filtering properties. Similar to the filters that work at the traditional radiofrequency band, such structures can behave as band-stop or pass-band filters, depending on the elements of the array (patch or aperture, respectively) and can be used for a variety of applications, such as: radomes, dichroic reflectors, waveguide filters, artificial magnetic conductors, microwave absorbers etc. To provide high-performance filtering properties at microwave bands, electromagnetic engineers have investigated various types of periodic structures: reconfigurable frequency selective screens, multilayered selective filters, as well as periodic arrays printed on anisotropic dielectric substrates and composed by fractal elements. In general, there is no closed form solution directly from a given desired frequency response to a corresponding device; thus, the analysis of its scattering characteristics requires the application of rigorous full-wave techniques. Besides that, due to the computational complexity of using a full-wave simulator to evaluate the frequency selective surface scattering variables, many electromagnetic engineers still use trial-and-error process until to achieve a given design criterion. As this procedure is very laborious and human dependent, optimization techniques are required to design practical periodic structures with desired filter specifications. Some authors have been employed neural networks and natural optimization algorithms, such as the genetic algorithms and the particle swarm optimization for the frequency selective surface design and optimization. This work has as objective the accomplishment of a rigorous study about the electromagnetic behavior of the periodic structures, enabling the design of efficient devices applied to microwave band. For this, artificial neural networks are used together with natural optimization techniques, allowing the accurate and efficient investigation of various types of frequency selective surfaces, in a simple and fast manner, becoming a powerful tool for the design and optimization of such structures

Aplicações de arranjos de antenas de microfita com patch supercondutor

This work has as main objective the study of arrays of microstrip antennas with superconductor rectangular patch. The phases and the radiation patterns are analyzed. A study of the main theories is presented that explain the microscopic and macroscopic phenomena of superconductivity. The BCS, London equations and the Two Fluid Model, are theories used in the applications of superconductors, at the microstrip antennas and antennas arrays. Phase Arrangements will be analyzed in linear and planar configurations. The arrangement factors of these configurations are obtained, and the phase criteria and the spacing between the elements, are examined in order to minimize losses in the superconductor, compared with normal conductors. The new rectangular patch antenna, consist of a superconducting material, with the critical temperature of 233 K, whose formula is Tl5Ba4Ca2Cu9Oy, is analyzed by the method of the Transverse nTransmission Line (TTL), developed by H. C. C. Fernandes, applied in the Fourier Transform Domain (FTD). The TTL is a full-wave method, which has committed to obtaining the electromagnetic fields in terms of the transverse components of the structure. The inclusion of superconducting patch is made using the complex resistive boundary condition, using the impedance of the superconductor in the Dyadic Green function, in the structure. Results are obtained from the resonance frequency depending on the parameters of the antenna using superconducting material, radiation patterns in E-Plane and H -Plane, the phased antennas array in linear and planar configurations, for different values of phase angles and different spacing between the elements

Uma proposta de FSS fractal com geometria simplificada

Frequency Selective Surfaces (FSS) are periodic structures in one or two dimensions that act as spatial filters, can be formed by elements of type conductors patches or apertures, functioning as filters band-stop or band-pass respectively. The interest in the study of FSS has grown through the years, because such structures meet specific requirements as low-cost, reduced dimensions and weighs, beyond the possibility to integrate with other microwave circuits. The most varied applications for such structures have been investigated, as for example, radomes, antennas systems for airplanes, electromagnetic filters for reflective antennas, absorbers structures, etc. Several methods have been used for the analysis of FSS, among them, the Wave Method (WCIP). Are various shapes of elements that can be used in FSS, as for example, fractal type, which presents a relative geometric complexity. This work has as main objective to propose a simplification geometric procedure a fractal FSS, from the analysis of influence of details (gaps) of geometry of the same in behavior of the resonance frequency. Complementarily is shown a simple method to adjust the frequency resonance through analysis of a FSS, which uses a square basic cell, in which are inserted two reentrance and dimensions these reentrance are varied, making it possible to adjust the frequency. For this, the structures are analyzed numerically, using WCIP, and later are characterized experimentally comparing the results obtained. For the two cases is evaluated, the influence of electric and magnetic fields, the latter through the electric current density vector. Is realized a bibliographic study about the theme and are presented suggestions for the continuation of this work

Evaluation of Electrical Properties of Lap Joints for BSCCO and YBCO Tapes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O Núcleo genuíno lateral dorsal do tálamo do sagüi (callithrix jacchus): Pprojeção retiniana, caracterização citoarquitetônica e neuroquimica da principal estação visual primária.

The thalamus plays an important role in the sensorial processing information, in this particular case, the visual information. Several neuronal groups have been characterized as conductors and processors of important sensorial information to the cerebral cortex. The lateral geniculate complex is one to them, and appears as a group very studied once it is responsible, in almost all totality, for the processing of visual information. Among the nuclei that constitute the lateral geniculate complex we highlight the dorsal lateral geniculate nucleus of the thalamus (DLG), the main thalamic relay for the visual information. This nucleus is located rostral and lateral to medial geniculate nucleus and ventral to thalamic pulvinar nucleus in most of the mammals. In the primates humans and non-humans, it presents as a laminate structure, arranged in layers, when observed in coronal sections. The objective of this work was to do a mapping of the retinal projections and a citoarchictetonic and neurochemical characterization of DLG in the marmoset (Callithrix jacchus), a New World primate. The retinal projections were traced by anterograde transport of subunit b of cholera toxin (CTb), the citoarchicteture was described by Nissl method, and to neurochemical characterization immunohistochemicals technical were used to examine the main neurotransmitters and neuroatives substances present in this neural center. In DGL of marmoset thalamus, in coronal sections labeled by Nissl method, was possible to visualize the division of this nucleus in four layers divided in two portions: magnocellular and parvocellular. The retinal projections were present being visualized fibers and terminals immunorreactives to CTb (IR-CTb) in the DLG ipsilateral and contralateral. And through the immunohistochemicals techniques was observed that DLG contain cells, fibers and/or terminals immunoreactives against neuronal nuclear protein, subunits of AMPA 15 glutamate receptors (GluR1, GluR2/3, GluR4), choline acetyltransferase, serotonin, glutamic acid decarboxylase, binding calcium proteins (calbindin, parvalbumin and calretinin), vasopressin, vasoactive intestinal polypeptide, and an astrocyte protein, glial fibrillary acidic protein.

O Serviço Ambulatorial Móvel de Urgência (SAMU) no contexto da reforma psiquiátrica: em análise a experiência de Aracaju/SE

This research investigated professional practices from Mobile Urgency Care Service (Serviço Ambulatorial Móvel de Urgência - SAMU) at psychiatric cases of the city of Aracaju/SE, Brazil and its possible articulations to psychosocial services network. The regulation no. 2048 of 11/05/2002 from Ministry Health establishes National Urgency Policy and designates that psychiatric cases are SAMU's responsibility. Then, it is necessary to propose an analyze of psychiatric urgency service under anti-asylums social movements standpoint, mainly because this service is responsive in assisting a person in crises. Fieldwork was developed in two phases. First one was made with SAMU workers and the information were produced by recorded semi-structured interviews. Results of this first phase indicate that urgency psychiatric conception from SAMU workers is based on aggressiveness concept; delays at psychiatric cases support and low training in mental health care which means several difficulties to emergency service. Although, we noticed that SAMU use asylum procedures at psychiatric cases like ropes and odder instruments to contain people. The second step of our research was to attend meetings to build a new psychiatric urgencies protocol for SAMU to define practices to auxiliaries, vehicular conductors and medical support regulation. Therefore, open interviews were accomplished with some participators and follows-up to psychiatric case on board of SAMU's cars. Afterwards we discussed how the urgency paradigm, that influence the protocol draw and as consequence distort what we believe is the essentially function of this device, that is to give care support to persons in crises and produce articulation to psychosocial services network

Single real transformation matrices applied to double three-phase transmission lines

Single real transformation matrices are tested as phase-mode transformation matrices of typical symmetrical systems with double three-phase and two parallel double three-phase transmission lines. These single real transformation matrices are achieved from eigenvector matrices of the mentioned systems and they are based on Clarke's matrix. Using linear combinations of the Clarke's matrix elements, the techniques applied to the single three-phase lines are extended to systems with 6 or 12 phase conductors. For transposed double three-phase lines, phase Z and Y matrices are changed into diagonal matrices in mode domain. Considering non-transposed cases of double three-phase lines, the results are not exact and the error analyses are performed using the exact eigenvalues. In case of two parallel double three-phase lines, the exact single real transformation matrix has not been obtained yet. Searching for this exact matrix, the analyses are based on a single homopolar reference. For all analyses in this paper, the homopolar mode is used as the only homopolar reference for all phase conductors of the studied system. (C) 2008 Elsevier B.V. All rights reserved.

Analysis of the Electrical Characteristics of an Alternative Solution for the Brazilian-Amazon Transmission System

This article analyzes the electrical parameters of a 3-phase transmission line using a 280-m-high steel tower that has been proposed for the Amazon transmission system in Brazil. The height of the line conductors and the distance between them are intrinsically related to the longitudinal and transverse parameters of the line. Hence, an accurate study is carried out in order to show the electrical variations between a transmission line using the new technology and a conventional 3-phase 440-kV line, considering a wide range of frequencies and variable soil resistivity. First, a brief review of the fundamental theory of line parameters is presented. In addition, by using a digital line model, simulations are carried out in the time domain to analyze possible and critical over-voltage transients on the proposed line representation.

Caracterização dos eletrocatalisadores LaMnO3, LaFeO3, LaFe0,2Mn0,8O3 E La0,5Fe0,5MnO3 preparados por autocombustão assistida por microondas para cátodos de células a combustível do tipo SOFC

Materials consisting of perovskite-type oxides (ABO3) have been developed in this work for applications in fuel cell cathodes of solid oxide type (SOFC). These ceramic materials are widely studied for this type of application because they have excellent electrical properties, conductivity and electrocatalytic. The oxides LaMnO3, LaFeO3, LaFe0.2Mn0.8O3 e La0.5Fe0.5MnO3 were synthesized by the method of microwave assisted combustion and after sintering at 800°C in order to obtain the desired phases. The powders were characterized by thermogravimetry (TG), X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and voltammetric analysis (cyclic voltammetry and polarization curves). The results obtained by XRF technique showed that the microwave synthesis method was effective in obtaining doping oxides with values near stoichiometric. In general, powders were obtained with particle size less than 0.5 μm, having a porous structure and uniform particle size distribution. The particles showed spherical form, irregular and crowded of varying sizes, according to the analysis of SEM. The behavior of the oxides opposite the thermal stability was monitored by thermogravimetric curves (TG), which showed low weight loss values for all samples, especially those of manganese had its structure. By means of Xray diffraction of the samples sintered at 800°C was possible to observe the formation of powders having high levels of crystallinity. Furthermore, undesirable phases such as La2O3 and MnOx were not identified in the diffractograms. These phases block the transport of oxygen ions in the electrode/electrolyte interface, affecting the electrochemical activity of the system. The voltammetric analysis of the electrocatalysts LF-800, LM-800, LF2M8-800 e L5F5M-800 revealed that these materials are excellent electrical conductors, because it increased the passage of electrical current of the working electrode significantly. Best performance for the oxygen reduction reaction was observed with iron-rich structures, considering that the materials obtained have characteristics suitable for use in fuel cell cathodes of solid oxide type

Associação da pressão arterial diastólica com o tempo acumulado de trabalho entre motoristas e cobradores

Pela técnica de regressão linear múltipla, estudou-se a relação existente entre pressão arterial diastólica e as variáveis tempo total acumulado de trabalho como condutor de veículos coletivos urbanos e idade, em uma população de 839 motoristas e cobradores, usuários de um serviço de saúde ocupacional da cidade de Campinas, Estado de São Paulo (Brasil). Os principais resultados encontrados foram associação positiva entre a pressão arterial diastólica e o tempo acumulado de trabalho, bem como existência de uma interação entre esta variável e a idade dos condutores.

On computing discriminants of subfields of Q(zeta(pr))

The conductor-discriminant formula, namely, the Hasse Theorem, states that if a number field K is fixed by a subgroup H of Gal(Q(zeta(n))/Q), the discriminant of K can be obtained from H by computing the product of the conductors of all characters defined modulo n which are associated to K. By calculating these conductors explicitly, we derive a formula to compute the discriminant of any subfield of Q(zeta(p)r), where p is an odd prime and r is a positive integer. (C) 2002 Elsevier B.V. (USA).