Elementos para la evaluación de interfaces de consulta de bases de datos

La interfaz de consulta de una base de datos en web sirve para establecer la comunicación entre personas que buscan información y los sistemas de recuperación de la información, siendo una de las partes más importantes del diseño conceptual de una base de datos. La interfaz de consulta está formada por un conjunto de páginas de las cuales podríamos destacar las siguientes: página de consulta, resultados, visualización del documento completo, información general y ayudas. El objetivo del texto consiste en determinar cuáles son los elementos básicos que han de estar presentes en cada una de las páginas antes citadas para contribuir a facilitar el proceso de recuperación de la información por parte de los usuarios.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Automated User Interface testing in Symbian Operating System

Tässä diplomityössä tutkitaan automatisoitua testausta ja käyttöliittymätestauksen tekemistä helpommaksi Symbian-käyttöjärjestelmässä. Työssä esitellään Symbian ja Symbian-sovelluskehityksessä kohdattavia haasteita. Lisäksi kerrotaan testausstrategioista ja -tavoista sekä automatisoidusta testaamisesta. Lopuksi esitetään työkalu, jolla testitapausten luominen toiminnalisuus- ja järjestelmätestaukseen tehdään helpommaksi. Graafiset käyttöliittymättuovat ainutlaatuisia haasteita ohjelmiston testaamiseen. Ne tehdään usein monimutkaisista komponenteista ja niitä suunnitellaan jatkuvasti uusiksi ohjelmistokehityksen aikana. Graafisten käyttöliittymien testaukseen käytetään usein kaappaus- ja toistotyökaluja. Käyttöliittymätestauksen testitapausten suunnittelu ja toteutus vaatii paljon panostusta. Koska graafiset käyttöliittymät muodostavat suuren osan koodista, voitaisiin säästää paljon resursseja tekemällä testitapausten luomisesta helpompaa. Käytännön osuudessa toteutettu projekti pyrkii tähän tekemällä testiskriptien luomisesta visuaalista. Näin ollen itse testien skriptikieltä ei tarvitse ymmärtää ja testien hahmottaminen on myös helpompaa.

Virtuaalitodellisuuslaboratorion laiteympäristön kehittäminen - ohjaimet ja ohjelmistot

Tämä diplomityö on tehty osana HumanICT-projektia, jonka tavoitteena on kehittää uusi, virtuaalitekniikoita hyödyntävä, työkoneiden käyttäjäliityntöjen suunnittelumenetelmä. Työn tarkoituksena oli kehittää VTT:n Tuotteet ja tuotanto tutkimusyksikköön kuluvan Ihminen-kone-turvallisuus ryhmän nykyistä virtuaalitodellisuuslaboratoriota siten, että sitä voidaan käyttää työkoneiden suunnittelussa sekä monipuolisissa ergonomiatarkasteluissa. Itse ympäristön kehittäminen pitää sisällään uuden ohjainjärjestelmän suunnittelun sekä sen implementoinnin nykyisin käytössä olevaan virtuaaliympäristöön. Perinteisesti ohjaamosimulaattorit ovat olleet sovelluskohteisiin räätälöityjä, joten ne ovat kalliita ja niiden konfiguroinnin muuttaminen on vaikeaa, joskus jopa mahdotonta. Tämän työntarkoituksena oli kehittää PC-tietokoneeseen ja yleiseen käyttöjärjestelmään perustuva ohjainjärjestelmä, joka on nopeasti kytkettävissä erilaisiin virtuaaliympäristön sovelluksiin, kuten ohjaamomalleihin. Työssä tarkasteltiin myös tapoja mallintaa fysikaalisia ilmiöitä reaaliaikasovelluksissa, eli on-line simuloinnissa. Tämän tarkastelun perusteella etsittiin ja valittiin jatkokäsittelyyn ohjelmistoja, joiden reaaliaikaisen dynamiikan simulointialgoritmitolivat kaikkein kehittyneimpiä ja monipuolisia.

User Centered Desing in E-Learning Environments : from Usability to Learner Experience

The advent of the Internet had a great impact on distance education and rapidly e-learning has become a killer application. Education institutions worldwide are taking advantage of the available technology in order to facilitate education to a growing audience. Everyday, more and more people use e-learning systems, environments and contents for both training and learning. E-learning promotes educationamong people that due to different reasons could not have access to education: people who could nottravel, people with very little free time, or withdisabilities, etc. As e-learning systems grow and more people are accessing them, it is necessary to consider when designing virtual environments the diverse needs and characteristics that different users have. This allows building systems that people can use easily, efficiently and effectively, where the learning process leads to a good user experience and becomes a good learning experience.

Methods for construction and analysis of computational models in systems biology : applications to the modelling of the heat shock response and the self-assembly of intermediate filaments

Systems biology is a new, emerging and rapidly developing, multidisciplinary research field that aims to study biochemical and biological systems from a holistic perspective, with the goal of providing a comprehensive, system- level understanding of cellular behaviour. In this way, it addresses one of the greatest challenges faced by contemporary biology, which is to compre- hend the function of complex biological systems. Systems biology combines various methods that originate from scientific disciplines such as molecu- lar biology, chemistry, engineering sciences, mathematics, computer science and systems theory. Systems biology, unlike “traditional” biology, focuses on high-level concepts such as: network, component, robustness, efficiency, control, regulation, hierarchical design, synchronization, concurrency, and many others. The very terminology of systems biology is “foreign” to “tra- ditional” biology, marks its drastic shift in the research paradigm and it indicates close linkage of systems biology to computer science. One of the basic tools utilized in systems biology is the mathematical modelling of life processes tightly linked to experimental practice. The stud- ies contained in this thesis revolve around a number of challenges commonly encountered in the computational modelling in systems biology. The re- search comprises of the development and application of a broad range of methods originating in the fields of computer science and mathematics for construction and analysis of computational models in systems biology. In particular, the performed research is setup in the context of two biolog- ical phenomena chosen as modelling case studies: 1) the eukaryotic heat shock response and 2) the in vitro self-assembly of intermediate filaments, one of the main constituents of the cytoskeleton. The range of presented approaches spans from heuristic, through numerical and statistical to ana- lytical methods applied in the effort to formally describe and analyse the two biological processes. We notice however, that although applied to cer- tain case studies, the presented methods are not limited to them and can be utilized in the analysis of other biological mechanisms as well as com- plex systems in general. The full range of developed and applied modelling techniques as well as model analysis methodologies constitutes a rich mod- elling framework. Moreover, the presentation of the developed methods, their application to the two case studies and the discussions concerning their potentials and limitations point to the difficulties and challenges one encounters in computational modelling of biological systems. The problems of model identifiability, model comparison, model refinement, model inte- gration and extension, choice of the proper modelling framework and level of abstraction, or the choice of the proper scope of the model run through this thesis.

Reaaliaikaisen PMU-mittaustiedon hyödyntäminen voimajärjestelmän valvonnassa

Tämä työ on tehty Fingrid Oyj:lle. Työn tavoitteena oli tutkia, miten reaaliaikaista PMU-mittaustietoa voidaan hyödyntää voimajärjestelmän valvonnassa. Voimajärjestelmän dynaamisia ilmiöitä ovat jännite- ja kulmastabiilius. Työssä tutkittiin voimajärjestelmän kulmastabiiliutta PSS/E-ohjelmalla simuloitujen mittaustulosten perusteella. Fouriermuunnoksen tulokset osoittavat, että huonoiten vaimeneva taajuuskomponentti on 0,3 Hz taajuus. Lisäksi tiedetään, että huonosti vaimeneva taajuuskomponentti rajoittaa siirtokapasiteettia. Voimajärjestelmän stabiiliutta voidaan esittää Wide Area Monitoring -järjestelmien (WAMS) avulla. WAMS perustuu Phasor Measurement -laitteen (PMU) reaaliaikaiseen mittaustekniikkaan. Jännitteen vaihekulman mittaaminen mahdollistaa voimajärjestelmän tilan määrittämisen reaaliajassa. Työssä on esitelty Fingridin käytössä oleva WAMS ja lisäksi esitelty kolmen eri laitetoimittajan WAMS:n rakennetta ja operaattorin käyttöön tarkoitettuja käyttöliittymiä. WAMS:n rakenteet ovat pääpiirteittäin samanlaisia, mutta stabiiliuden visuaalisessa esittämisessä on eroja. PMU -mittaustietoja on mahdollista tuoda käytönvalvontajärjestelmään erillisellä tiedonsiirtoprotokollalla. PMU-mittaustiedon hyödyntäminen käytönvalvontajärjestelmän toimintaaluenäytöllä mahdollistaa verkon tilan esittämisen reaaliajassa. Roottorin kulmastabiilius esitetään Fingridin käytönvalvontajärjestelmässä vaihekulmaerojen avulla ja työssä on esitetty, kuinka vaihekulmaeron arvolla on vaikutus tehonsiirtoon. Vaihekulmaeron arvo kuvaa vian jälkeisen tehoheilahtelun voimakkuutta. PMU-mittaustiedon esittäminen antaa operaattorille selkeämmän kuvan ylläpitää tehonsiirto turvallisella tasolla ja epästabiilin heilahtelun havainnoiminen vähentää suurhäiriön riskiä. Tulevaisuudessa siirtoverkon kehittyessä tarvitaan operaattorin käyttöön myös nopeita stabiilisuutta esittäviä työkaluja.

Linear-quadratic optimal control of descriptor systems

In recent years the analysis and synthesis of (mechanical) control systems in descriptor form has been established. This general description of dynamical systems is important for many applications in mechanics and mechatronics, in electrical and electronic engineering, and in chemical engineering as well. This contribution deals with linear mechanical descriptor systems and its control design with respect to a quadratic performance criterion. Here, the notion of properness plays an important role whether the standard Riccati approach can be applied as usual or not. Properness and non-properness distinguish between the cases if the descriptor system is exclusively governed by the control input or by its higher-order time-derivatives additionally. In the unusual case of non-proper systems a quite different problem of optimal control design has to be considered. Both cases will be solved completely.

Designing a user interface for game developers to enter game specific information

Designing user interfaces for novel software systems can be challenging since the usability preferences of the users are not well known. This thesis presents a usability study conducted for the development of a user interface for game developers to enter game specific information. By conducting usability testing, the usability preferences of game developers were explored and the design was shaped according to their needs. An assessment of the overall usability of the final design is provided together with the main findings that include the usability preferences and design recommendations. The results showed that the most valuable usability preferences are quickness, error tolerance and the ability to constantly inspect the entered information.

Cardiovascular control in experimental diabetes

Several studies have reported impairment in cardiovascular function and control in diabetes. The studies cited in this review were carried out from a few days up to 3 months after streptozotocin administration and were concerned with the control of the circulation. We observed that early changes (5 days) in blood pressure control by different peripheral receptors were maintained for several months. Moreover, the impairment of reflex responses observed after baroreceptor and chemoreceptor stimulation was probably related to changes in the efferent limb of the reflex arc (sympathetic and parasympathetic), but changes also in the central nervous system could not be excluded. Changes in renal sympathetic nerve activity during volume expansion were blunted in streptozotocin-treated rats, indicating an adaptive natriuretic and diuretic response in the diabetic state. The improvement of diabetic cardiovascular dysfunction induced by exercise training seems to be related to changes in the autonomic nervous system. Complementary studies about the complex interaction between circulation control systems are clearly needed to adequately address the management of pathophysiological changes associated with diabetes.

Agent-based management systems for many-core platforms : rigorous design and efficient implementation

Due to various advantages such as flexibility, scalability and updatability, software intensive systems are increasingly embedded in everyday life. The constantly growing number of functions executed by these systems requires a high level of performance from the underlying platform. The main approach to incrementing performance has been the increase of operating frequency of a chip. However, this has led to the problem of power dissipation, which has shifted the focus of research to parallel and distributed computing. Parallel many-core platforms can provide the required level of computational power along with low power consumption. On the one hand, this enables parallel execution of highly intensive applications. With their computational power, these platforms are likely to be used in various application domains: from home use electronics (e.g., video processing) to complex critical control systems. On the other hand, the utilization of the resources has to be efficient in terms of performance and power consumption. However, the high level of on-chip integration results in the increase of the probability of various faults and creation of hotspots leading to thermal problems. Additionally, radiation, which is frequent in space but becomes an issue also at the ground level, can cause transient faults. This can eventually induce a faulty execution of applications. Therefore, it is crucial to develop methods that enable efficient as well as resilient execution of applications. The main objective of the thesis is to propose an approach to design agentbased systems for many-core platforms in a rigorous manner. When designing such a system, we explore and integrate various dynamic reconfiguration mechanisms into agents functionality. The use of these mechanisms enhances resilience of the underlying platform whilst maintaining performance at an acceptable level. The design of the system proceeds according to a formal refinement approach which allows us to ensure correct behaviour of the system with respect to postulated properties. To enable analysis of the proposed system in terms of area overhead as well as performance, we explore an approach, where the developed rigorous models are transformed into a high-level implementation language. Specifically, we investigate methods for deriving fault-free implementations from these models into, e.g., a hardware description language, namely VHDL.

Les personnes âgées face au défi d'utilisation des nouvelles technologies : étude de l’utilisabilité des interfaces de téléphones portables

L’évolution technologique et l'accroissement de la population vieillissante sont deux tendances majeures de la dernière décennie. Durant cette période, la prolifération ubiquitaire de la téléphonie mobile a changé les habitudes de communication des gens. Le changement constant des appareils téléphoniques portatifs, l'augmentation des fonctions, la diversité iconographique, la variété des interfaces et la complexité de navigation exigent aujourd’hui non seulement plus de temps d'adaptation et d’apprentissage, mais représentent aussi un effort cognitif important. Les technologies d'information et de communication (TIC) sont devenues des outils incontournables de la vie moderne. Pour les personnes âgées, cet univers en perpétuelle mutation avec ces nouveaux appareils représente un obstacle à l’accès à l’information et contribue ainsi au gap générationnel. Le manque de référence et de soutien et les déficiences physiques ou cognitives, que certaines personnes développent en vieillissant, rendent l'usage de ce type d’objet souvent impossible. Pourtant, les produits intelligents plus accessibles, tant au niveau physique que cognitif sont une réelle nécessité au sein de notre société moderne permettant aux personnes âgées de vivre de manière plus autonome et « connectée ». Cette recherche a pour but d'exposer les défis d'usage des téléphones portables existants et d'identifier en particulier les problèmes d’usage que les personnes âgées manifestent. L’étude vise la tranche de population qui est peu habituée aux technologies de communications qui ne ciblent le plus souvent que les plus jeunes et les professionnels. C’est en regardant les habitudes d’usage, que la recherche qualitative nous permettra d’établir un profil des personnes âgées par rapport au TIC et de mieux comprendre les défis liés à la perception, compréhension et l’usage des interfaces de téléphones portables.

Bits et Rarezas : deux compositions assistées par ordinateur

La version intégrale de ce mémoire est disponible uniquement pour consultation individuelle à la Bibliothèque de musique de l'Université de Montréal (http://www.bib.umontreal.ca/MU)

Immobilization of nitrifying bacterial consortia on wood particles for bioaugmenting nitrification in shrimp culture systems

Shrimp grow out systems under zero water exchange mode demand constant remediation of total ammonia nitrogen (TAN) andNO2 −–Nto protect the crop. To address this issue, aninexpensive and user-friendly technology using immobilized nitrifying bacterial consortia (NBC) as bioaugmentors has been developed and proposed for adoption in shrimp culture systems. Indigenous NBC stored at 4 °C were activated at room temperature (28 °C) and cultured in a 2 L bench top fermentor. The consortia, after enumeration by epifluorescence microscopy,were immobilized on delignifiedwood particles of a soft wood tree Ailantus altissima (300–1500 μm) having a surface area of 1.87m2 g−1. Selection of wood particle as substratumwas based on adsorption of NBC on to the particles, biofilm formation, and their subsequent nitrification potential. The immobilization could be achievedwithin 72 h with an initial cell density of 1×105 cells mL−1. On experimenting with the lowest dosage of 0.2 g (wet weight) immobilized NBC in 20 L seawater, a TAN removal rate of 2.4 mg L−1 within three days was observed. An NBC immobilization device could be developed for on site generation of the bioaugmentor preparation as per requirement. The product of immobilization never exhibited lag phase when transferred to fresh medium. The extent of nitrification in a simulated systemwas two times the rate observed in the control systems suggesting the efficacy in real life situations. The products of nitrification in all experiments were undetectable due to denitrifying potency, whichmade the NBC an ideal option for biological nitrogen removal. The immobilized NBC thus generated has been named TANOX (Total Ammonia Nitrogen Oxidizer)

Evaluation of Auditory Displays Supporting Aircraft Approach and Landing

Abstract: The paper describes an auditory interface using directional sound as a possible support for pilots during approach in an instrument landing scenario. Several ways of producing directional sounds are illustrated. One using speaker pairs and controlling power distribution between speakers is evaluated experimentally. Results show, that power alone is insufficient for positioning single isolated sound events, although discrimination in the horizontal plane performs better than in the vertical. Additional sound parameters to compensate for this are proposed.