Comparative analysis of drills for composite laminates

The characteristics of carbon fiber-reinforced plastics allow a very broad range of uses. Drilling is often necessary to assemble different components, but this can lead to various forms of damage, such as delamination which is the most severe. However, a reduced thrust force can decrease the risk of delamination. In this work, two variables of the drilling process were compared: tool material and geometry, as well as the effect of feed rate and cutting speed. The parameters that were analyzed include: thrust force, delamination extension and mechanical strength through open-hole tensile test, bearing test, and flexural test on drilled plates. The present work shows that a proper combination of all the factors involved in drilling operations, like tool material, tool geometry and cutting parameters, such as feed rate or cutting speed, can lead to the reduction of delamination damage and, consequently, to the enhancement of the mechanical properties of laminated parts in complex structures, evaluated by open-hole, bearing, or flexural tests.

Comparative study about heating systems for pultrusion process

Different heating systems have been used in pultrusion, where the most widely used heaters are planar resistances. The primary objective of this study was to develop an improved heating system and compare its performance with that of a system with planar resistances. In this study, thermography was used to better understand the temperature profile along the die. Finite element analysis was performed to determine the amount of energy consumed by the heating systems. Improvements were made to the die to test the new heating system, and it was found that the new system reduced the setup time and energy consumption by approximately 57%.

Lesion detection performance in an anthropomorphic chest phantom: comparative analysis of low-dose CT data on two hybrid imaging systems

Introduction: multimodality environment; requirement for greater understanding of the imaging technologies used, the limitations of these technologies, and how to best interpret the results; dose optimization; introduction of new techniques; current practice and best practice; incidental findings, in low-dose CT images obtained as part of the hybrid imaging process, are an increasing phenomenon with advancing CT technology; resultant ethical and medico-legal dilemmas; understanding limitations of these procedures important when reporting images and recommending follow-up; free-response observer performance study was used to evaluate lesion detection in low-dose CT images obtained during attenuation correction acquisitions for myocardial perfusion imaging, on two hybrid imaging systems.

A comparative analysis of fault injection methods via enhanced on-chip debug infrastructures

On-chip debug (OCD) features are frequently available in modern microprocessors. Their contribution to shorten the time-to-market justifies the industry investment in this area, where a number of competing or complementary proposals are available or under development, e.g. NEXUS, CJTAG, IJTAG. The controllability and observability features provided by OCD infrastructures provide a valuable toolbox that can be used well beyond the debugging arena, improving the return on investment rate by diluting its cost across a wider spectrum of application areas. This paper discusses the use of OCD features for validating fault tolerant architectures, and in particular the efficiency of various fault injection methods provided by enhanced OCD infrastructures. The reference data for our comparative study was captured on a workbench comprising the 32-bit Freescale MPC-565 microprocessor, an iSYSTEM IC3000 debugger (iTracePro version) and the Winidea 2005 debugging package. All enhanced OCD infrastructures were implemented in VHDL and the results were obtained by simulation within the same fault injection environment. The focus of this paper is on the comparative analysis of the experimental results obtained for various OCD configurations and debugging scenarios.

Treatment of relapsing chronic infections of the respiratory tract: a comparative study of the effectiveness of non specific immunotherapy with the immunoadjuvant p40 and of vaccinotherapy

The treatment of relapsing chronic infections (RCI) encounters many difficulties. In the present study, the use of the immuno adjuvant P40 either alone or in association with vaccinotherapy for the treatment of RCI turned out to be very effective, whereas vaccinotherapy alone was not. It is hypothesized that cell-mediated immunity may play a major role in controlling RCI, since the clinical improvement of the patients kept up with the positivation of previously negative skin tests carried out with either the specific infecting agent or with recall-anti gens.

Schistosoma mansoni: comparative evaluation of different routes of experimental infection

Experiments were carried out with Sw albino mice and it was concluded that the percutaneous route via abdominal skin was significatively more efficient than tail immersion method and subcutaneous infection; the subcutaneous injection was significatively more efficient than the percutaneous infection through the tail; this latter and the intraperitoneal injection, resulted in similar infections, but were significatively less efficient than the others. Significative difference was also observed in the comparison between the subcutaneous route and percutaneous infection through ear pinna. The influence of the site of skin infection by percutaneous route was also discussed.

Comparative study of the biological behaviour in hamster of two isolates of leishmania characterized respectively as L. major-like and L. donovani

Hamster inoculated intraperitoneally with 1 x 10(7) parasites of L. donovani and L. major-like of the New World were studied in groups of 15, 30, 60 and 90 days of infection. The parasite load and density showed progressive increase with the evolution of the infection and was higher in the L. donovani groups than in the L. major-like groups. The L. major-like groups showed parasite density higher in the spleen than in the liver and was similar in both organs in L. donovani groups. The histopathology showed a diffuse marked hyperplasia and hypertrophy of the reticuloendothelial system with high parasitism in the L. donovani groups while there was focal involvement of these organs in L. major-like groups, forming nodules of macrophages that were scantly parasitised. The biological behaviour could be useful in the preliminary studies of Leishmania strain in regional laboratories and understanding the histopathology of lesions caused by different leishmania species.

A comparative study on LMS interoperability

A Learning Management System (LMS) plays an important role in any eLearning environment. Still, the LMS cannot afford to be isolated from other systems in an educational institution. Thus, the potential for interoperability is an important, although frequently overlooked, aspect of an LMS system. In this chapter we make a comparative study of the interoperability features of the most relevant LMS in use nowadays. We start by defining a comparison framework, with systems that are representative of the LMS universe, and interoperability facets that are representative of the type integration with other broad classes of eLearning systems. For each interoperability facet we categorize and identify the most representative remote systems, we present a comprehensive survey of existing standards and we illustrate with concrete integration scenarios. Finally, we draw some conclusions on the status of interoperability in LMS based on our study.

Comparative studies of Yersinia pestis outer membrane isolation techniques and their potential use in plague epidemiology

In the present study three techniques for obtaining outer membrane enriched fractions from Yersinia pestis were evaluated. The techniques analysed were: differential solubilization of the cytoplasmic membrane with Sarkosyl or Triton X-100, and centrifugation in sucrose density gradients. The sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) of outer membrane isolated by the different methods resulted in similar protein patterns. The measurement of NADH-dehydrogenase and succinate dehydrogenase (inner membrane enzymes) indicated that the outer membrane preparations obtained by the three methods were pure enough for analytical studies. In addition, preliminary evidences on the potential use of outer membrane proteins for the identification of geographic variants of Y. pestis wild isolates are presented.

Comparative analysis of time-frequency methods estimating the time-varying microstructure of sleep EEG spindles

Proceedings of the Information Technology Applications in Biomedicine, Ioannina - Epirus, Greece, October 26-28, 2006

Comparative study of adenoviruses with monoclonal antibodies

The obtainment of monoclonal antibodies for adenovirus species 4(Ad4) is described.The specificities of selected monoclonal antibodies were determined by means of viral neutralization test in cell culture, immunofluorescence and Enzyme-Linked Immunosorbent Assay (ELISA), in the presence of the following species of human adenovirus: 1, 2, 5 (subgenus C), 4 (subgenus E), 7 and 16 (subgenus B) and 9 (subgenus D). Two monoclonal antibodies species specific to adenovirus 4 (1CIII and 3DIII) and one monoclonal antibody that cross reacted with adenovirus species 4 and 7 (2HIII) were obtained.

Estudo comparativo entre as técnicas de diluição em caldo e diluição em ágar, nos antibiogramas para Candida: a comparative study

Os autores compararam o desempenho das técnicas de diluição em caldo e diluição em ágar, mediante a determinação da CIM (concentração inibitória mínima) e da CFM (concentração fungicida mínima) de antifúngicos poliênicos e imidazólicos, frente a diversas espécies de Candida. A concordância entre as técnicas foi variável em função do antifúngico utilizado. Os melhores percentuais de concordância ocorreram quando se realizou o teste com poliênicos. Os autores discutem aspectos que envolvem a problemática dos testes de sensibilidade de leveduras a antifúngicos

Comparative study on the localization of adult Schistosoma mansoni worms in albino mice anesthetized with pentobarbital sodium, ether or chlorophorm

The effect of anesthetic drugs on the localization of adult worms in albino mice was compared. The animals with 56 days of infection were anesthetized with pentobarbital sodium, ether or chlorophorm. Perfusion was carried out immediately after, recovering the worms and classifying them in relation to their localization on the liver or portal vein and the mesenteric veins. Our results showed that pentobarbital sodium produced a greater displacement of the worms to the liver (89%) than ether (76%) and chlorophorm (34%) did, when compared to the control group (22%). The difference between pentobarbital sodium and ether was significant (p < 0.05). We suggest that anesthetic drugs may not be used in studies on the distribution of adult worms in several hosts.

The role of public policy in health care promotion: a comparative perspective

Comunicação apresentada na 17th International conference on Health Promotio Hospitals and Health Services em Hersonissis, Crete, Grécia de 6-8 de maio de 2009

Comparative analysis of near and mid-infrared spectroscopy to monitor recombinant cyprosin production

Infrared spectroscopy, either in the near and mid (NIR/MIR) region of the spectra, has gained great acceptance in the industry for bioprocess monitoring according to Process Analytical Technology, due to its rapid, economic, high sensitivity mode of application and versatility. Due to the relevance of cyprosin (mostly for dairy industry), and as NIR and MIR spectroscopy presents specific characteristics that ultimately may complement each other, in the present work these techniques were compared to monitor and characterize by in situ and by at-line high-throughput analysis, respectively, recombinant cyprosin production by Saccharomyces cerevisiae. Partial least-square regression models, relating NIR and MIR-spectral features with biomass, cyprosin activity, specific activity, glucose, galactose, ethanol and acetate concentration were developed, all presenting, in general, high regression coefficients and low prediction errors. In the case of biomass and glucose slight better models were achieved by in situ NIR spectroscopic analysis, while for cyprosin activity and specific activity slight better models were achieved by at-line MIR spectroscopic analysis. Therefore both techniques enabled to monitor the highly dynamic cyprosin production bioprocess, promoting by this way more efficient platforms for the bioprocess optimization and control.