Air blast freezing of fruit pulp models in commercial boxes: influence of preferential channels in the bed on freezing times estimating

The freezing times of fruit pulp models packed and conditioned in multi-layered boxes were evaluated under conditions similar to those employed commercially. Estimating the freezing time is a difficult practice due to the presence of significant voids in the boxes, whose influence may be analyzed by means of various methods. In this study, a procedure for estimating freezing time by using the models described in the literature was compared with experimental measurements by collecting time/temperature data. The following results show that the airflow through packages is a significant parameter for freezing time estimation. When the presence of preferential channels was considered, the predicted freezing time in the models could be 10% lower than the experimental values, depending on the method. The isotherms traced as a function of the location of the samples inside the boxes showed the displacement of the thermal center in relation to the geometric center of the product.

Weldability of powder bed fusion fabricated stainless steel 316L sheets to cold rolled sheet metal

Weldability of powder bed fusion (PBF) fabricated components has come to discussion in past two years due to resent developments in the PBF technology and limited size of the machines used in the fabrication process. This study concentrated on effects of energy input of welding on mechanical properties and microstructural features of welds between PBF fabricated stainless steel 316L sheets and cold rolled sheet metal of same composition by the means of destructive testing and microscopic analysis. Optical fiber diameter, laser power and welding speed were varied during the experiments that were executed following one variable at a time (OVAT) method. One of the problems of welded PBF fabricated components has been lower elongations at break comparing to conventionally manufactured components. Decreasing energy input of the laser keyhole welding decreased elongations at break of the welded specimens. Ultimate tensile strengths were not affected significantly by the energy input of the welding, but fracturing of the specimens welded using high energy input occurred from the weld metal. Fracturing of the lower energy input welds occurred from the PBF fabricated base metal. Energy input was found to be critical factor for mechanical properties of the welds. Multioriented grain growth and formation of neck at fusion zone boundary on the cold rolled side of the weld was detected and suspected to be result from weld pool flows caused by differences in molten weld pool behaviour between the PBF fabricated and cold rolled sides of the welds.

Dynamic Modelling of Circulating Fluidized Bed Plant with Gas Turbine Repowering

Increasing amount of renewable energy source based electricity production has set high load control requirements for power grid balance markets. The essential grid balance between electricity consumption and generation is currently hard to achieve economically with new-generation solutions. Therefore conventional combustion power generation will be examined in this thesis as a solution to the foregoing issue. Circulating fluidized bed (CFB) technology is known to have sufficient scale to acts as a large grid balancing unit. Although the load change rate of the CFB unit is known to be moderately high, supplementary repowering solution will be evaluated in this thesis for load change maximization. The repowering heat duty is delivered to the CFB feed water preheating section by smaller gas turbine (GT) unit. Consequently, steam extraction preheating may be decreased and large amount of the gas turbine exhaust heat may be utilized in the CFB process to reach maximum plant electrical efficiency. Earlier study of the repowering has focused on the efficiency improvements and retrofitting to maximize plant electrical output. This study however presents the CFB load change improvement possibilities achieved with supplementary GT heat. The repowering study is prefaced with literature and theory review for both of the processes to maximize accuracy of the research. Both dynamic and steady-state simulations accomplished with APROS simulation tool will be used to evaluate repowering effects to the CFB unit operation. Eventually, a conceptual level analysis is completed to compare repowered plant performance to the state-of-the-art CFB performance. Based on the performed simulations, considerably good improvements to the CFB process parameters are achieved with repowering. Consequently, the results show possibilities to higher ramp rate values achieved with repowered CFB technology. This enables better plant suitability to the grid balance markets.

Control of Bubbling Fluidized Bed Conditions

The objectives of this master’s thesis were to understand the importance of bubbling fluidized bed (BFB) conditions and to find out how digital image processing and acoustic emission technology can help in monitoring the bed quality. An acoustic emission (AE) measurement system and a bottom ash camera system were evaluated in acquiring information about the bed conditions. The theory part of the study describes the fundamentals of BFB boiler and evaluates the characteristics of bubbling bed. Causes and effects of bed material coarsening are explained. The ways and methods to monitor the behaviour of BFB are determined. The study introduces the operating principles of AE technology and digital image processing. The empirical part of the study describes an experimental arrangement and results of a case study at an industrial BFB boiler. Sand consumption of the boiler was reduced by optimization of bottom ash handling and sand feeding. Furthermore, data from the AE measurement system and the bottom ash camera system was collected. The feasibility of these two systems was evaluated. The particle size of bottom ash and the changes in particle size distribution were monitored during the test period. Neither of the systems evaluated was ready to serve in bed quality control accurately or fast enough. Particle size distributions according to the bottom ash camera did not correspond to the results of manual sieving. Comprehensive interpretation of the collected AE data requires much experience. Both technologies do have potential and with more research and development they may enable acquiring reliable and real-time information about the bed conditions. This information could help to maintain disturbance-free combustion process and to optimize bottom ash handling system.

Spare Part Management of Bubbling Fluidized Bed Boiler

Energy generation industry is very capital-intensive industry. Productivity and availability requirements have increased while competition and quality requirement have increased. Maintenance has a significant role that these requirements can be reached. Even maintenance is much more than repairing faults nowadays, spare parts are important part of maintenance. Large power boilers are user-specific therefore features of boilers vary from project to project. Equipment have been designed to follow the customer’s requirements therefore spare parts are mainly user-specific also. The study starts with literature review introducing maintenance, failure mechanisms, and systems and equipment of bubbling fluidized bed boiler. At the final part spare part management is discussed from boiler technology point of view. For this part of the study science publications about spare part management are utilized also some specialist from a boiler technology company and other original equipment manufacturers were interviewed. Spare part management is challenging from the boiler supplier point of view and the end user of spare parts has a responsibility of stocking items. Criticality analysis can be used for finding most critical devices of the process and spare part management shall focus to those items. Spare parts are part of risk management. Stocking spare parts is increasing costs but then high spare part availability is decreasing delay time caused by fault of item.

Investigations into phosphorus removal by constructed wetlands : root bed media modifications /

A study has been conducted focusing on how the phosphorus renrx)val efficiency of a constructed wetland (CW) can be optimized through the selective enrichment of the substratum. Activated alumina and powdered iron were examined as possible enrichment compounds. Using packed glass column trials it was found that alumina was not suitable for the renx)val of ortho-phosphate from solution, while mixtures of powdered iron and quartz sand proved to be very efficient. The evaluation of iron/sand mixtures in CWs planted with cattails was performed in three stages; first using an indoor lab scale wetland, then an outdoor lab scale wetland, and finally in a small scale pilot project. For the lab scale tests, three basic configurations were evaluated: using the iron/sand as a pre-filter, in the root bed. and as a post filter. Primary lagoon effluent was applied to the test cells to simulate actual CW conditions, and the total phosphorus and iron concentrations of the influent and effluent were nfK)nitored. The pilot scale trials were limited to using only a post filter design, due to in-progress research at the pilot site. The lab scale tests achieved average renrK>val efficiencies greater than 91% for all indoor configurations, and greater than 97% for all outdoor configurations. The pilot scale tests had an average renK)val efficiency of 60%. This relatively low efficiency in the pilot scale can be attributed to the post filters being only one tenth the size of the lab scale test in terms of hydraulic loading (6 cm/day vs. 60 cm/day).

The role of skeletal muscle PLIN proteins at rest and following lipolytic stimulation

This thesis investigated the subcellular location of skeletal muscle PLIN proteins (PLIN2, PLIN3, and PLIN5) as well as protein interactions with ATGL and HSL at rest and following lipolytic stimulation. In addition, the serine phosphorylation state of PLIN2, PLIN3, and PLIN5 was determined at rest and following lipolytic stimulation. An isolated whole muscle technique was used to study the effects of contraction and epinephrine-induced lipolysis. This method allowed for the examination of the effects of contraction and epinephrine alone and in combination. Further, the soleus was chosen for investigating the role of PLIN proteins in skeletal muscle lipolysis due to its suitability for isolated incubation, and the fact that it is primarily oxidative in nature (~80% type I fibres). It has also been previously shown to have the greatest reliance on lipid metabolism and for this reason is ideal for investigating the role of PLIN proteins in lipolysis. Immunofluorescence microscopy revealed that skeletal muscle lipid droplets are partially co-localized to both PLIN2 and PLIN5 and that contraction does not affect the amount of colocalization, indicating that PLIN5 is not recruited to lipid droplets with contraction (PLIN2 ~65%; PLIN5 ~56%). Results from the immunoprecipitation studies revealed that with lipolysis in skeletal muscle the interaction between ATGL and CGI-58 is increased (study 2: 128% with contraction, p<0.05; study 3: 50% with contraction, 25% epinephrine, 80% contraction + epinephrine, p>0.05). Further PLIN2, PLIN3, and PLIN5 all interact with ATGL and HSL, while only PLIN3 and PLIN5 interact with CGI-58. Among these interactions, the association between PLIN2 and ATGL decreases with lipolytic stimulation (study 2: 21% with contraction, p<0.05). Finally our results demonstrate that PLIN3 and PLIN5 are serine phosphorylated at rest and that the level of phosphorylation remains unchanged in the face of either contractile or adrenergic stimulation. In summary, the regulation of skeletal muscle lipolysis is a complex process involving multiple proteins and enzymes. The skeletal muscle PLIN proteins likely play a role in skeletal muscle lipid droplet dynamics, and the data from this thesis indicate that these proteins may work together in regulating lipolysis by interaction with both ATGL and HSL.

Intrahemispheric dysfunction in primary motor cortex without corpus callosum: a transcranial magnetic stimulation study

Affiliation: Département de Psychologie, Université de Montréal

Politiques canadienne et soviétique lors de la seconde crise de Berlin 1958-1961

La seconde crise de Berlin (1958-1961) est un évènement majeur de la guerre froide. L'hypothèse de notre recherche remet en question le rôle du Canada et les perceptions négatives de l'Occident envers l'URSS durant cette crise. La recherche se divise en trois volets : premièrement, une revue de l'historiographie de la politique canadienne; deuxièmement, une présentation de la chronologie des évènements de la crise de Berlin, l'importance de la diplomatie multilatérale canadienne et la politique nucléaire de Diefenbaker; enfin, un examen de la politique étrangère soviétique. À partir de sources primaires et d'un bilan historiographique,il fut démontré que, durant la crise de Berlin, le Canada a réussi à influencer l'OTAN et à ménager les gouvernements américains et soviétiques. Quant à l'URSS, contrairement à l'image négative que l'Occident en avait, celle-ci a manifesté durant cette crise des intentions pacifiques envers l'Occident, contredisant les interprétations orthodoxes de la guerre froide.

Rythme veille-sommeil et dimensions cliniques dans le trouble de personnalité limite à l’adolescence

Cette thèse examine le rythme veille-sommeil et son association avec l’instabilité émotionnelle, l’agressivité et l’impulsivité dans le trouble de personnalité limite (TPL) à l’adolescence. Dans un premier temps, la revue de la littérature sur les perturbations objectives du sommeil dans le TPL a mis en lumière plusieurs difficultés similaires, évaluées par polysomnographie, à celles observées dans la dépression adulte. De 1980 à 2010, aucune recherche n’a examiné le rythme veille-sommeil, aucune n’a étudié les adolescents TPL et plusieurs n’ont pas contrôlé l’état dépressif comme facteur de confusion. De ce constat, il s’avérait pertinent de mener une étude sur le rythme veille-sommeil dans le TPL à l’adolescence en l’absence de dépression co-occurrente. L’adolescence comportant plusieurs caractéristiques physiologiques, psychologiques et sociales, tenir compte des aspects développementaux était essentiel. Dans un second temps, un protocole de recherche fût mis en place à la Clinique des troubles de l’humeur et le recrutement a été réalisé auprès d’adolescents souffrant d’un TPL et sans état dépressif actuel. Ils devaient porter pendant plus de neuf jours (période comprenant deux fins de semaine) un actigraphe, appareil non invasif évaluant l’alternance veille-sommeil dans l’environnement naturel. L’abandon précoce au traitement étant prévalent chez les patients TPL, la fiabilité de l’étude a été examinée afin de déterminer les raisons favorisant et celles nuisant au recrutement et à la collecte des données. La réflexion sur les aspects méthodologiques de l’étude actigraphique a permis d’expliquer les limites de ce type de protocole. Dans un troisième temps, le rythme veille-sommeil des adolescents TPL (n=18) a été caractérisé et comparé à celui des jeunes ayant un trouble bipolaire (n=6), trouble psychiatrique partageant plusieurs manifestations communes avec le TPL, et à celui des adolescents sans trouble de santé mentale (n=20). Les résultats suggèrent que l’adolescent TPL passe plus de temps en éveil durant la période de repos que les jeunes appartenant aux deux autres groupes. De plus, les adolescents TPL présentent une plus grande variabilité inter journalière des heures de lever et du temps total de sommeil que les autres adolescents. Ils se réveillent une heure de plus, et dorment donc une heure supplémentaire, que les adolescents sans trouble mental lors des journées sans routine. Dans un quatrième temps, les analyses corrélationnelles entre les données actigraphiques et les scores aux questionnaires auto-rapportés évaluant l’instabilité émotionnelle, l’agressivité et l’impulsivité suggèrent que plus l’adolescent TPL passe du temps éveillé alors qu’il est au lit, plus il déclare présenter des comportements agressifs, surtout physiques, durant le jour. En résumé, cette thèse contribue à la littérature scientifique en explorant pour la première fois le rythme veille-sommeil et son lien avec les manifestations symptomatiques dans le TPL à l’adolescence. Les résultats suggèrent fortement l’importance d’évaluer et de traiter les problèmes du rythme veille-sommeil que présentent ces jeunes lors de la prise en charge.

« Good night, sleep tight, don’t let the bed bugs bite» : exploring the mental health fallout of urban bed bug infestation in Montréal, Québec

Problématique : La littérature scientifique ne contient actuellement aucune étude épidémiologique portant sur la relation entre l’exposition à une infestation de punaises de lit (Cimex lectularis) et la santé mentale. L’objectif de cette étude est d’explorer la relation entre le statut d’exposition aux punaises de lit et des mesures de dépression, anxiété et perturbation du sommeil. Méthodes : Cette recherche est une étude transversale basée sur une analyse secondaire des données provenant de N=91 adultes locataires de logements insalubres qui ont répondu à un questionnaire de santé au moment d’interventions médico-environnementales menées par la direction de santé publique de Montréal entre janvier et juin 2010. Le questionnaire de santé inclut le « Questionnaire de santé du patient (QSP-9) », qui est un outil mesurant les symptômes associés à la dépression, l’outil de dépistage d’anxiété généralisée (GAD-7) et les items 1-18 de l’indice de la qualité du sommeil de Pittsburgh (PSQI). L’association entre une exposition autorapportée à une infestation de punaises de lit et le niveau de perturbation du sommeil selon la sous-échelle correspondante du PSQI, les symptômes dépressifs selon le QSP-9 et les symptômes anxieux selon le GAD-7, a été évaluée en utilisant une analyse de régression linéaire multivariée. Des données descriptives relatives aux troubles de sommeil autodéclarés et à des comportements reliés à un isolement social, dus à une exposition aux punaises de lit, sont aussi présentées. Résultats : L’échantillon comprenait 38 hommes et 53 femmes. Parmi les 91 participants, 49 adultes ont signalé une exposition aux punaises de lit et de ce nombre, 53,06% (26/49) ont déclaré des troubles de sommeil et 46,94% (23/49) des comportements d’isolement social, en raison de l’exposition. Les adultes exposés à des punaises de lit ont obtenu des résultats significativement plus élevés sur le QSP-9 (p=0,025), le GAD-7 (p=0,026) et sur la sous-échelle mesurant la perturbation du sommeil (p=0,003) comparativement à ceux qui n’étaient pas exposés. Conclusions : Cette première étude exploratoire met en évidence une association significative entre l’état d’exposition aux punaises de lit et des troubles de sommeil, ainsi que des symptômes anxieux et dépressifs, indiquant que ceux qui sont exposés aux punaises de lit représentent un groupe possiblement à risque de développer des problèmes de santé mentale. Ces résultats viennent en appui aux initiatives des décideurs pour organiser des efforts coordonnés d’éradication au niveau des villes et des provinces.

Rest-activity cycle disturbances in the acute phase of moderate to severe traumatic brain injury

Background. Sleep-wake disturbances are among the most persistent sequelae after traumatic brain injury (TBI) and probably arise during the hospital stay following TBI. These disturbances are characterized by difficulties sleeping at night and staying awake during the day. Objective. The aim of the present study was to document rest-activity cycle consolidation in acute moderate/severe TBI using actigraphy and to assess its association with injury severity and outcome. Methods. In all, 16 hospitalized patients (27.1 ± 11.3 years) with moderate/severe TBI wore actigraphs for 10 days, starting in the intensive care unit (ICU) when continuous sedation was discontinued and patients had reached medical stability. Activity counts were summed for daytime (7:00-21:59 hours) and nighttime periods (22:00-6:59 hours). The ratio of daytime period activity to total 24-hour activity was used to quantify rest-activity cycle consolidation. An analysis of variance was carried out to characterize the evolution of the daytime activity ratio over the recording period. Results. Rest-activity cycle was consolidated only 46.6% of all days; however, a significant linear trend of improvement was observed over time. Greater TBI severity and longer ICU and hospital lengths of stay were associated with poorer rest-activity cycle consolidation and evolution. Patients with more rapid return to consolidated rest-activity cycle were more likely to have cleared posttraumatic amnesia and have lower disability at hospital discharge. Conclusions. Patients with acute moderate/ severe TBI had an altered rest-activity cycle, probably reflecting severe fragmentation of sleep and wake episodes, which globally improved over time. A faster return to rest-activity cycle consolidation may predict enhanced brain recovery.

A Study on the Engineering Behaviour of Grouted Loose Soils

The constructional activities in the coastal belt of our country often demand deep foundations because of the poor engineering properties and the related problems arising from weak soil at shallow depths.The soil profile in coastal area often consists of very loose sandy soils extending to a depth of 3 to 4 m from the ground level underlain by clayey soils of medium consistency.The very low shearing resistance of the foundation bed causes local as well as punching shear failure.Hence structures built on these soils may suffer from excessive settlements.This type of soil profile is very common in coastal areas of Kerala,especially in Cochin. Further,the high water table and limited depth of the top sandy layer in these areas restrict the depth of foundation thereby further reducing the safe bearing capacity.

Influence of Angle of Air Injection and Particles in Bed Hydrodynamics of Swirling Fluidized Bed

The thesis presented here unveils an experimental study of the hydrodynamic characteristics of swirling fluidized bed viz. pressure drop across the distributor and the bed, minimum fluidizing velocity, bed behaviour and angle of air injection. In swirling fluidized bed the air is admitted to the bed at an angle 'Ѳ' to the horizontal. The vertical component of the velocity v sin Ѳ causes fluidization and the horizontal component v cos Ѳ contributes to swirl motion of the bed material.The study was conducted using spherical particles having sizes 3.2 mm, 5.5 mm & 7.4 mm as the bed materials. Each of these particles was made from high density polyethylene, nylon and acetal having relative densities of 0.93, 1.05 and 1.47 respectively.The experiments were conducted using conidour type distributors having four rows of slits. Altogether four distributors having angles of air injection (Φ)- 0°, 5°, 10° & 15° were designed and fabricated for the study. The total number of slits in each distributor was 144. The area of opening was 6220 mm2 making the percentage area of opening to 9.17. But the percentage useful area of opening of the distributor was 96.The experiments on the variation of distributor pressure drop with superficial velocity revealed that the distributor pressure drop decreases with angle of air injection. Investigations related to bed hydrodynamics were conducted using 2.5 kg of bed material. The bed pressure drop measurements were made along the radial direction of the distributor at distances of 60 mm, 90 mm, 120 mm & 150 mm from the centre of the distributor. It was noticed that after attaining minimum fluidizing velocity, the bed pressure drop increases along the radial direction of the distributor. But at a radial distance of 90 mm from the distributor centre, after attaining minimum fluidizing velocity the bed pressure drop remains almost constant. It was also observed that the bed pressure drop varies inversely with particle size as well as particle density.An attempt was made to determine the effect of various parameters on minimum fluidizing velocity. It was noticed that the minimum fluidizing velocity varies directly with angle of air injection (Φ), particle size and particle density.The study on the bed behaviour showed that the superficial velocity required for initiating various bed phenomena (such as swirl motion and separation of particles from the cone at the centre) increase with increase in particle size as well as particle density. It was also observed that the particle size and particle density directly influence the superficial velocity required for various regimes of bed behaviour such as linear variation of bed pressure drop, constant bed pressure drop and sudden increase or decrease in bed pressure drop.Experiments were also performed to study the effect of angle of air injection (Φ). It was noticed that the bed pressure drop decreases with angle of air injection. It was also noticed that the angle of air injection directly influence the superficial velocity required for initiating various bed phenomena as well as the various regimes of bed behaviour.

Queueing Theory And Other Applications Of Stochastic Processes Queueing And Inventory Models With Rest Periods

In this thesis we study the effect of rest periods in queueing systems without exhaustive service and inventory systems with rest to the server. Most of the works in the vacation models deal with exhaustive service. Recently some results have appeared for the systems without exhaustive service.