Harold Pinter: A Night Out : A Study in the Political ConnotationsAnd the Abuse of Power

Harold Pinter’s A Night Out is a significant but rarely produced piece of drama. Therefore, there is very little criticism to support or contradict my argument. The reason why I chose to do my essay on this particular play is to open doors for academic research and to try and make it an equal to its sister plays. I will raise questions and topics to prove the play is worth the readers’ time and effort and that A Night Out is a sharp piece of political theatre. Although at first glance it is a simple enough story, a straightforward tale of the nasty consequences of motherly love when it is pushed to the limit, on deeper inspection, a more far reaching and complex analysis of the abuse of power can be observed. The play offers a variety of themes, including: interpersonal power struggles, failed attempts at communication, antagonistic relationships, the threat of impending or past violence, the struggle for survival or identity, domination and submission, politics, lies and verbal, physical, psychological and sexual abuse. The prevailing theme in the play is the abuse of power: powerful parties oppressing weaker ones, and the results of the oppressed party looking for a vent in someone even weaker than themselves.

Investigating The Sources Of Fresh Water Affecting The Hydrological Balance Of Lakes Enriquillo And Azuei (Hispaniola) – Data Analysis

The Enriquillo and Azuei are saltwater lakes located in a closed water basin in the southwestern region of the island of La Hispaniola, these have been experiencing dramatic changes in total lake-surface area coverage during the period 1980-2012. The size of Lake Enriquillo presented a surface area of approximately 276 km2 in 1984, gradually decreasing to 172 km2 in 1996. The surface area of the lake reached its lowest point in the satellite observation record in 2004, at 165 km2. Then the recent growth of the lake began reaching its 1984 size by 2006. Based on surface area measurement for June and July 2013, Lake Enriquillo has a surface area of ~358 km2. Sumatra sizes at both ends of the record are 116 km2 in 1984 and 134 km2in 2013, an overall 15.8% increase in 30 years. Determining the causes of lake surface area changes is of extreme importance due to its environmental, social, and economic impacts. The overall goal of this study is to quantify the changing water balance in these lakes and their catchment area using satellite and ground observations and a regional atmospheric-hydrologic modeling approach. Data analyses of environmental variables in the region reflect a hydrological unbalance of the lakes due to changing regional hydro-climatic conditions. Historical data show precipitation, land surface temperature and humidity, and sea surface temperature (SST), increasing over region during the past decades. Salinity levels have also been decreasing by more than 30% from previously reported baseline levels. Here we present a summary of the historical data obtained, new sensors deployed in the sourrounding sierras and the lakes, and the integrated modeling exercises. As well as the challenges of gathering, storing, sharing, and analyzing this large volumen of data in a remote location from such a diverse number of sources.

After balance of powers diplomacy, globalization´s politics

The September 11th episode not only marked the end of the Cold War, but of the Balance of Powers Diplomacy, through which the nation-states defin e themselves as enemies, and solve their problems with war or war threat. Today the major countries do not have enemies among other nation-states. Slowly Globalization’s Politics replace the previous system, as long as globalization gets regulated, and the rule of law emerges at international level. In the global world we have three types of countries: the rich, the ones of intermediary development, and the poor. Globalization is inherently unjust to the latter. Unable to compete in a world where competition prevails everywhere, such countries are either just outside the system, or, frustrated, recur to terrorism. Interests, however, do not point out only in the direction of inequalities. Through politics, i.e., through debate and argument, it will be possible to create a less unjust international law system. And also though it, the hope in an international government ceases to be a mere utopia.

Balance of payment crises and capital flows : the role of liquidity

A model of externaI CrISIS is deveIoped focusing on the interaction between Iiquidity creation by financiaI intermediaries and foreign exchange collapses. The intermediaries' role of transforming maturities is shown to result in larger movements of capital and a higher probability of crisis. This resembles the observed cycle in capital fiows: large infiows, crisis and abrupt outfiows. The mo deI highlights how adverse productivity and international interest rate shocks can be magnified by the behavior of individual foreign investors linked together through their deposits in the intermediaries. An eventual collapse of the exchange rate can link investors' behavior even further. The basic model is then extended, quite naturally, to study the effects of capital fiow contagion between countries.

Balance of payments dominance: its implications for macroeconomic policy

This paper defines “balance of payments dominance” as a macroeconomic regime in which the short-term macroeconomic dynamics is essentially determined by external shocks, positive or negative. It argues that this is the predominant regime in emerging and developing countries. Trade shocks play an important role but the major procyclical shocks are associated with boom-bust cycles in external financing. Policy challenges are associated not only with the management of such shocks but also with the need to enhance the space for countercyclical macroeconomic policies, as boom-bust cycles tend to pressure macroeconomic policies to behave in a procyclical way. Under these conditions, the best bet is to design policies to reduce external vulnerabilities through a mix of administered exchange rate policies, very active foreign exchange reserve management, reduced reliance on external borrowing, and macroprudential regulations, including those directly affecting capital flows. Countercyclical fiscal policy can also play a role but face strong economic and political economy challenges.

Balance of payments dominance : its implocations for macroeconomic policy

This paper defines “balance of payments dominance” as a macroeconomic regime in which the short-term macroeconomic dynamics is essentially determined by external shocks, positive or negative. It argues that this is the predominant regime in emerging and developing countries. Trade shocks play an important role but the major procyclical shocks are associated with boom-bust cycles in external financing. Policy challenges are associated not only with the management of such shocks but also with the need to enhance the space for countercyclical macroeconomic policies, as boom-bust cycles tend to pressure macroeconomic policies to behave in a procyclical way. Under these conditions, the best bet is to design policies to reduce external vulnerabilities through a mix of administered exchange rate flexibility, very active foreign exchange reserve management, reduced reliance on external borrowing, and macroprudential regulations, including those directly affecting capital flows. Countercyclical fiscal policy can also play a role but face strong economic and political economy challenges.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.

A new method for real time computation of power quality indices based on instantaneous space phasors

One of the important issues about using renewable energy is the integration of dispersed generation in the distribution networks. Previous experience has shown that the integration of dispersed generation can improve voltage profile in the network, decrease loss, etc. but can create safety and technical problems as well. This work report the application of the instantaneous space phasors and the instantaneous complex power in observing performances of the distribution networks with dispersed generators in steady state. New IEEE apparent power definition, the so-called Buchholz-Goodhue effective apparent power, as well as new proposed power quality (oscillation) index in the three-phase distribution systems with unbalanced loads and dispersed generators, are applied. Results obtained from several case studies using IEEE 34 nodes test network are presented and discussed. (C) 2006 Elsevier B.V. All rights reserved.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Pole placement by coordinated tuning of Power System Stabilizers and FACTS-POD stabilizers

This work presents the application of the Decentralized Modal Control method for pole placement in multimachine power systems utilizing FACTS (Flexible AC Transmission Systems), STATCOM (Static Synchronous Compensator) and UPFC (Unified Power Flow Controller) devices. For this, these devices are equipped with supplementary damping controllers, denominated POD ( Power Oscillation Damping), achieving a coordinated project with local controllers (Power System Stabilizers - PSS). Comparative analysis on the function of damping of the FACTS, STATCOM and UPFC is performed using the New England System that has 10 generators, 39 buses and 46 transmission lines. (c) 2011 Elsevier Ltd. All rights reserved.

Stability analysis of power systems described with detailed models by automatic method

The power system stability analysis is approached taking into explicit account the dynamic performance of generators internal voltages and control devices. The proposed method is not a direct method in the usual sense since conclusion for stability or instability is not exclusively based on energy function considerations but it is automatic since the conclusion is achieved without an analyst intervention. The stability test accounts for the nonconservative nature of the system with control devices such as the automatic voltage regulator (AVR) and automatic generation control (AGC) in contrast with the well-known direct methods. An energy function is derived for the system with machines forth-order model, AVR and AGC and it is used to start the analysis procedure and to point out criticalities. The conclusive analysis itself is made by means of a method based on the definition of a region surrounding the equilibrium point where the system net torque is equilibrium restorative. This region is named positive synchronization region (PSR). Since the definition of the PSR boundaries have no dependence on modelling approximation, the PSR test conduces to reliable results. (C) 2008 Elsevier Ltd. All rights reserved.

A Parameterization Technique for the Continuation Power Flow Developed from the Analysis of Power Flow Curves

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)